- 17 Jan, 2017 2 commits
-
-
Johannes Thumshirn authored
Commit 01e0e15c ("scsi: don't use fc_bsg_job::request and fc_bsg_job::reply directly") introduced a typo, which causes that the bsg_request variable in bfad_im_bsg_els_ct_request() is initialized to itself instead of pointing to the bsg job's request. Reported-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Ewan D. Milne authored
The call to scsi_is_sas_rphy() needs to be made on the SAS end_device, not on the SCSI device. Fixes: 835831c5 ("ses: use scsi_is_sas_rphy instead of is_sas_attached") Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
- 16 Jan, 2017 1 commit
-
-
Fam Zheng authored
The parameter name should be wwpn instead of wwnn. Signed-off-by:
Fam Zheng <famz@redhat.com> Acked-by:
Johannes Thumshirn <jth@kernel.org> Signed-off-by:
-
- 12 Jan, 2017 3 commits
-
-
Roberto Sassu authored
Set variables initialized in lpfc_sli4_alloc_resource_identifiers() to NULL if an error occurred. Otherwise, lpfc_sli4_driver_resource_unset() attempts to free the memory again. Signed-off-by:
Roberto Sassu <rsassu@suse.de> Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Christoph Hellwig authored
Now that qla2xxx uses the IRQ layer affinity assignment, affinity won't change over the life time of a device and the notifiers are useless. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Christoph Hellwig authored
The first two or three vectors in qla2xxx adapter are global and not associated with a specific queue. They should not have IRQ affinity assigned. Signed-off-by:
-
- 10 Jan, 2017 2 commits
-
-
Dave Jones authored
Commit 093df737 ("scsi: qla2xxx: Fix Target mode handling with Multiqueue changes.") introduces two bodies of code that look similar but with s/req/rsp/ in the second instance. But in one case, it looks like this conversion was missed. Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Acked-by:
Quinn Tran <Quinn.Tran@cavium.com> Signed-off-by:
-
Milan P. Gandhi authored
There is a race condition with qla2xxx optrom functions where one thread might modify optrom buffer, optrom_state while other thread is still reading from it. In couple of crashes, it was found that we had successfully passed the following 'if' check where we confirm optrom_state to be QLA_SREADING. But by the time we acquired mutex lock to proceed with memory_read_from_buffer function, some other thread/process had already modified that option rom buffer and optrom_state from QLA_SREADING to QLA_SWAITING. Then we got ha->optrom_buffer 0x0 and crashed the system: if (ha->optrom_state != QLA_SREADING) return 0; mutex_lock(&ha->optrom_mutex); rval = memory_read_from_buffer(buf, count, &off, ha->optrom_buffer, ha->optrom_region_size); mutex_unlock(&ha->optrom_mutex); With current optrom function we get following crash due to a race condition: [ 1479.466679] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1479.466707] IP: [<ffffffff81326756>] memcpy+0x6/0x110 [...] [ 1479.473673] Call Trace: [ 1479.474296] [<ffffffff81225cbc>] ? memory_read_from_buffer+0x3c/0x60 [ 1479.474941] [<ffffffffa01574dc>] qla2x00_sysfs_read_optrom+0x9c/0xc0 [qla2xxx] [ 1479.475571] [<ffffffff8127e76b>] read+0xdb/0x1f0 [ 1479.476206] [<ffffffff811fdf9e>] vfs_read+0x9e/0x170 [ 1479.476839] [<ffffffff811feb6f>] SyS_read+0x7f/0xe0 [ 1479.477466] [<ffffffff816964c9>] system_call_fastpath+0x16/0x1b Below patch modifies qla2x00_sysfs_read_optrom, qla2x00_sysfs_write_optrom functions to get the mutex_lock before checking ha->optrom_state to avoid similar crashes. The patch was applied and tested and same crashes were no longer observed again. Tested-by:Milan P. Gandhi <mgandhi@redhat.com> Signed-off-by:
-
- 06 Jan, 2017 3 commits
-
-
Benjamin Poirier authored
bna & bfa firmware version 3.2.5.1 was submitted to linux-firmware on Feb 17 19:10:20 2015 -0500 in 0ab54ff1dc ("linux-firmware: Add QLogic BR Series Adapter Firmware"). bna was updated to use the newer firmware on Feb 19 16:02:32 2015 -0500 in 3f307c3d ("bna: Update the Driver and Firmware Version") bfa was not updated. I presume this was an oversight but it broke support for bfa+bna cards such as the following 04:00.0 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.1 Fibre Channel [0c04]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.2 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) 04:00.3 Ethernet controller [0200]: Brocade Communications Systems, Inc. 1010/1020/1007/1741 10Gbps CNA [1657:0014] (rev 01) Currently, if the bfa module is loaded first, bna fails to probe the respective devices with [ 215.026787] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1 [ 215.043707] bna 0000:04:00.2: bar0 mapped to ffffc90001fc0000, len 262144 [ 215.060656] bna 0000:04:00.2: initialization failed err=1 [ 215.073893] bna 0000:04:00.3: bar0 mapped to ffffc90002040000, len 262144 [ 215.090644] bna 0000:04:00.3: initialization failed err=1 Whereas if bna is loaded first, bfa fails with [ 249.592109] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0 [ 249.610738] bfa 0000:04:00.0: Running firmware version is incompatible with the driver version [ 249.833513] bfa 0000:04:00.0: bfa init failed [ 249.833919] scsi host6: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.0 driver: 3.2.25.0 [ 249.841446] bfa 0000:04:00.1: Running firmware version is incompatible with the driver version [ 250.045449] bfa 0000:04:00.1: bfa init failed [ 250.045962] scsi host7: QLogic BR-series FC/FCOE Adapter, hwpath: 0000:04:00.1 driver: 3.2.25.0 Increase bfa's requested firmware version. Also increase the driver version. I only tested that all of the devices probe without error. Reported-by:Tim Ehlers <tehlers@gwdg.de> Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Acked-by:
Rasesh Mody <rasesh.mody@cavium.com> Signed-off-by:
-
Burak Ok authored
If a call to mempool_create_slab_pool() in snic_probe() returns NULL, return -ENOMEM to indicate failure. mempool_creat_slab_pool() only fails if it cannot allocate memory. https://bugzilla.kernel.org/show_bug.cgi?id=189061 Reported-by: bianpan2010@ruc.edu.cn Signed-off-by:
Burak Ok <burak-kernel@bur0k.de> Signed-off-by:
Andreas Schaertl <andreas.schaertl@fau.de> Acked-by:
Narsimhulu Musini <nmusini@cisco.com> Reviewed-by:
-
Satish Kharat authored
This fix is to avoid calling fnic_fw_reset_handler through fnic_host_reset when a finc reset is alreay in progress. Signed-off-by:
Satish Kharat <satishkh@cisco.com> Signed-off-by:
Sesidhar Baddela <sebaddel@cisco.com> Signed-off-by:
-
- 20 Dec, 2016 2 commits
-
-
Randy Dunlap authored
Fix build of SCSI qedi driver. It uses uio interfaces so it should depend on UIO. ERROR: "uio_unregister_device" [drivers/scsi/qedi/qedi.ko] undefined! ERROR: "uio_event_notify" [drivers/scsi/qedi/qedi.ko] undefined! ERROR: "__uio_register_device" [drivers/scsi/qedi/qedi.ko] undefined! Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: QLogic-Storage-Upstream@cavium.com Signed-off-by:
-
Bart Van Assche authored
Ensure that if scsi-mq is enabled that scsi_internal_device_block() waits until ongoing shost->hostt->queuecommand() calls have finished. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
-
- 14 Dec, 2016 27 commits
-
-
Wei Fang authored
A race between scanning and fc_remote_port_delete() may result in a permanent stop if the device gets blocked before scsi_sysfs_add_sdev() and unblocked after. The reason is that blocking a device sets both the SDEV_BLOCKED state and the QUEUE_FLAG_STOPPED. However, scsi_sysfs_add_sdev() unconditionally sets SDEV_RUNNING which causes the device to be ignored by scsi_target_unblock() and thus never have its QUEUE_FLAG_STOPPED cleared leading to a device which is apparently running but has a stopped queue. We actually have two places where SDEV_RUNNING is set: once in scsi_add_lun() which respects the blocked flag and once in scsi_sysfs_add_sdev() which doesn't. Since the second set is entirely spurious, simply remove it to fix the problem. Cc: <stable@vger.kernel.org> Reported-by:
Zengxi Chen <chenzengxi@huawei.com> Signed-off-by:
Wei Fang <fangwei1@huawei.com> Reviewed-by:
-
Adam Manzanares authored
This patch adds support for request iopriority handling in the mpt3sas layer. This works only when a ATA device is behind the SATL. The ATA device also has to indicate that it supports command priorities in the identify information that is pulled from the SATL. Signed-off-by:
Adam Manzanares <adam.manzanares@wdc.com> Acked-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Signed-off-by:
-
Quinn Tran authored
- Fix race condition between dpc_thread accessing Multiqueue resources and qla2x00_remove_one thread trying to free resource. - Fix out of order free for Multiqueue resources. Also, Multiqueue interrupts needs a workqueue. Interrupt needed to stop before the wq can be destroyed. Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Michael Hernandez authored
Tell the SCSI layer how many hardware queues we have based on the number of max queue pairs created. The number of max queue pairs created will depend on number of MSI-X vector count. This feature can be turned on via CONFIG_SCSI_MQ_DEFAULT or passing scsi_mod.use_blk_mq=Y as a parameter to the kernel Reviewed-by:
Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by:
Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by:
-
Michael Hernandez authored
Replaced existing multiple queue functionality with framework that allows for the creation of pairs of request and response queues, either at start of day or dynamically. Queue pair creation depend on module parameter "ql2xmqsupport", which need to be enabled to create queue pair. Signed-off-by:
-
Michael Hernandez authored
Replaces the old pci_enable_msi[x]* and pci_disable_msi[x] calls. Signed-off-by:
-
himanshu.madhani@cavium.com authored
This patch is allowing only ROM mailbox command which are necessary to initialize chip after a reset has been issued. In a target environment, there could be a user space daemon which can issue statistics and other management mailbox command which are non-critical. This patch will timeout non critical mailbox commands immediately rather than waiting for timeout, if driver detects that chip reset has been issued or chip reset is in progress. Reviewed-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by:
-
Amit Kushwaha authored
This patch cleanup warning reported by checkpatch.pl WARNING: Possible unnecessary 'out of memory' message With no available memory, a warn on message already gets printed by page alloc apis and modified goto use if memory unallocated. Signed-off-by:
Amit Kushwaha <kushwaha.a@samsung.com> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
adam radford authored
This change updates the 3ware drivers (3w-xxxx, 3w-9xxx, 3w-sas) email addresses from linuxraid@lsi.com to aradford@gmail.com, since the old email address doesn't exist. This patch was updated to remove www.lsi.com text. [mkp: applied by hand] Signed-off-by:
Adam Radford <aradford@gmail.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Steffen Maier authored
It is unavoidable that zfcp_scsi_queuecommand() has to finish requests with DID_IMM_RETRY (like fc_remote_port_chkready()) during the time window when zfcp detected an unavailable rport but fc_remote_port_delete(), which is asynchronous via zfcp_scsi_schedule_rport_block(), has not yet blocked the rport. However, for the case when the rport becomes available again, we should prevent unblocking the rport too early. In contrast to other FCP LLDDs, zfcp has to open each LUN with the FCP channel hardware before it can send I/O to a LUN. So if a port already has LUNs attached and we unblock the rport just after port recovery, recoveries of LUNs behind this port can still be pending which in turn force zfcp_scsi_queuecommand() to unnecessarily finish requests with DID_IMM_RETRY. This also opens a time window with unblocked rport (until the followup LUN reopen recovery has finished). If a scsi_cmnd timeout occurs during this time window fc_timed_out() cannot work as desired and such command would indeed time out and trigger scsi_eh. This prevents a clean and timely path failover. This should not happen if the path issue can be recovered on FC transport layer such as path issues involving RSCNs. Fix this by only calling zfcp_scsi_schedule_rport_register(), to asynchronously trigger fc_remote_port_add(), after all LUN recoveries as children of the rport have finished and no new recoveries of equal or higher order were triggered meanwhile. Finished intentionally includes any recovery result no matter if successful or failed (still unblock rport so other successful LUNs work). For simplicity, we check after each finished LUN recovery if there is another LUN recovery pending on the same port and then do nothing. We handle the special case of a successful recovery of a port without LUN children the same way without changing this case's semantics. For debugging we introduce 2 new trace records written if the rport unblock attempt was aborted due to still unfinished or freshly triggered recovery. The records are only written above the default trace level. Benjamin noticed the important special case of new recovery that can be triggered between having given up the erp_lock and before calling zfcp_erp_action_cleanup() within zfcp_erp_strategy(). We must avoid the following sequence: ERP thread rport_work other context ------------------------- -------------- -------------------------------- port is unblocked, rport still blocked, due to pending/running ERP action, so ((port->status & ...UNBLOCK) != 0) and (port->rport == NULL) unlock ERP zfcp_erp_action_cleanup() case ZFCP_ERP_ACTION_REOPEN_LUN: zfcp_erp_try_rport_unblock() ((status & ...UNBLOCK) != 0) [OLD!] zfcp_erp_port_reopen() lock ERP zfcp_erp_port_block() port->status clear ...UNBLOCK unlock ERP zfcp_scsi_schedule_rport_block() port->rport_task = RPORT_DEL queue_work(rport_work) zfcp_scsi_rport_work() (port->rport_task != RPORT_ADD) port->rport_task = RPORT_NONE zfcp_scsi_rport_block() if (!port->rport) return zfcp_scsi_schedule_rport_register() port->rport_task = RPORT_ADD queue_work(rport_work) zfcp_scsi_rport_work() (port->rport_task == RPORT_ADD) port->rport_task = RPORT_NONE zfcp_scsi_rport_register() (port->rport == NULL) rport = fc_remote_port_add() port->rport = rport; Now the rport was erroneously unblocked while the zfcp_port is blocked. This is another situation we want to avoid due to scsi_eh potential. This state would at least remain until the new recovery from the other context finished successfully, or potentially forever if it failed. In order to close this race, we take the erp_lock inside zfcp_erp_try_rport_unblock() when checking the status of zfcp_port or LUN. With that, the possible corresponding rport state sequences would be: (unblock[ERP thread],block[other context]) if the ERP thread gets erp_lock first and still sees ((port->status & ...UNBLOCK) != 0), (block[other context],NOP[ERP thread]) if the ERP thread gets erp_lock after the other context has already cleard ...UNBLOCK from port->status. Since checking fields of struct erp_action is unsafe because they could have been overwritten (re-used for new recovery) meanwhile, we only check status of zfcp_port and LUN since these are only changed under erp_lock elsewhere. Regarding the check of the proper status flags (port or port_forced are similar to the shown adapter recovery): [zfcp_erp_adapter_shutdown()] zfcp_erp_adapter_reopen() zfcp_erp_adapter_block() * clear UNBLOCK ---------------------------------------+ zfcp_scsi_schedule_rports_block() | write_lock_irqsave(&adapter->erp_lock, flags);-------+ | zfcp_erp_action_enqueue() | | zfcp_erp_setup_act() | | * set ERP_INUSE -----------------------------------|--|--+ write_unlock_irqrestore(&adapter->erp_lock, flags);--+ | | .context-switch. | | zfcp_erp_thread() | | zfcp_erp_strategy() | | write_lock_irqsave(&adapter->erp_lock, flags);------+ | | ... | | | zfcp_erp_strategy_check_target() | | | zfcp_erp_strategy_check_adapter() | | | zfcp_erp_adapter_unblock() | | | * set UNBLOCK -----------------------------------|--+ | zfcp_erp_action_dequeue() | | * clear ERP_INUSE ---------------------------------|-----+ ... | write_unlock_irqrestore(&adapter->erp_lock, flags);-+ Hence, we should check for both UNBLOCK and ERP_INUSE because they are interleaved. Also we need to explicitly check ERP_FAILED for the link down case which currently does not clear the UNBLOCK flag in zfcp_fsf_link_down_info_eval(). Signed-off-by:Steffen Maier <maier@linux.vnet.ibm.com> Fixes: 8830271c ("[SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport") Fixes: a2fa0aed ("[SCSI] zfcp: Block FC transport rports early on errors") Fixes: 5f852be9 ("[SCSI] zfcp: Fix deadlock between zfcp ERP and SCSI") Fixes: 338151e0 ("[SCSI] zfcp: make use of fc_remote_port_delete when target port is unavailable") Fixes: 3859f6a2 ("[PATCH] zfcp: add rports to enable scsi_add_device to work again") Cc: <stable@vger.kernel.org> #2.6.32+ Reviewed-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by:
-
Steffen Maier authored
Since quite a while, Linux issues enough SCSI commands per scsi_device which successfully return with FCP_RESID_UNDER, FSF_FCP_RSP_AVAILABLE, and SAM_STAT_GOOD. This floods the HBA trace area and we cannot see other and important HBA trace records long enough. Therefore, do not trace HBA response errors for pure benign residual under counts at the default trace level. This excludes benign residual under count combined with other validity bits set in FCP_RSP_IU, such as FCP_SNS_LEN_VAL. For all those other cases, we still do want to see both the HBA record and the corresponding SCSI record by default. Signed-off-by:
-
Benjamin Block authored
When SCSI EH invokes zFCP's callbacks for eh_device_reset_handler() and eh_target_reset_handler(), it expects us to relent the ownership over the given scsi_cmnd and all other scsi_cmnds within the same scope - LUN or target - when returning with SUCCESS from the callback ('release' them). SCSI EH can then reuse those commands. We did not follow this rule to release commands upon SUCCESS; and if later a reply arrived for one of those supposed to be released commands, we would still make use of the scsi_cmnd in our ingress tasklet. This will at least result in undefined behavior or a kernel panic because of a wrong kernel pointer dereference. To fix this, we NULLify all pointers to scsi_cmnds (struct zfcp_fsf_req *)->data in the matching scope if a TMF was successful. This is done under the locks (struct zfcp_adapter *)->abort_lock and (struct zfcp_reqlist *)->lock to prevent the requests from being removed from the request-hashtable, and the ingress tasklet from making use of the scsi_cmnd-pointer in zfcp_fsf_fcp_cmnd_handler(). For cases where a reply arrives during SCSI EH, but before we get a chance to NULLify the pointer - but before we return from the callback -, we assume that the code is protected from races via the CAS operation in blk_complete_request() that is called in scsi_done(). The following stacktrace shows an example for a crash resulting from the previous behavior: Unable to handle kernel pointer dereference at virtual kernel address fffffee17a672000 Oops: 0038 [#1] SMP CPU: 2 PID: 0 Comm: swapper/2 Not tainted task: 00000003f7ff5be0 ti: 00000003f3d38000 task.ti: 00000003f3d38000 Krnl PSW : 0404d00180000000 00000000001156b0 (smp_vcpu_scheduled+0x18/0x40) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 EA:3 Krnl GPRS: 000000200000007e 0000000000000000 fffffee17a671fd8 0000000300000015 ffffffff80000000 00000000005dfde8 07000003f7f80e00 000000004fa4e800 000000036ce8d8f8 000000036ce8d9c0 00000003ece8fe00 ffffffff969c9e93 00000003fffffffd 000000036ce8da10 00000000003bf134 00000003f3b07918 Krnl Code: 00000000001156a2: a7190000 lghi %r1,0 00000000001156a6: a7380015 lhi %r3,21 #00000000001156aa: e32050000008 ag %r2,0(%r5) >00000000001156b0: 482022b0 lh %r2,688(%r2) 00000000001156b4: ae123000 sigp %r1,%r2,0(%r3) 00000000001156b8: b2220020 ipm %r2 00000000001156bc: 8820001c srl %r2,28 00000000001156c0: c02700000001 xilf %r2,1 Call Trace: ([<0000000000000000>] 0x0) [<000003ff807bdb8e>] zfcp_fsf_fcp_cmnd_handler+0x3de/0x490 [zfcp] [<000003ff807be30a>] zfcp_fsf_req_complete+0x252/0x800 [zfcp] [<000003ff807c0a48>] zfcp_fsf_reqid_check+0xe8/0x190 [zfcp] [<000003ff807c194e>] zfcp_qdio_int_resp+0x66/0x188 [zfcp] [<000003ff80440c64>] qdio_kick_handler+0xdc/0x310 [qdio] [<000003ff804463d0>] __tiqdio_inbound_processing+0xf8/0xcd8 [qdio] [<0000000000141fd4>] tasklet_action+0x9c/0x170 [<0000000000141550>] __do_softirq+0xe8/0x258 [<000000000010ce0a>] do_softirq+0xba/0xc0 [<000000000014187c>] irq_exit+0xc4/0xe8 [<000000000046b526>] do_IRQ+0x146/0x1d8 [<00000000005d6a3c>] io_return+0x0/0x8 [<00000000005d6422>] vtime_stop_cpu+0x4a/0xa0 ([<0000000000000000>] 0x0) [<0000000000103d8a>] arch_cpu_idle+0xa2/0xb0 [<0000000000197f94>] cpu_startup_entry+0x13c/0x1f8 [<0000000000114782>] smp_start_secondary+0xda/0xe8 [<00000000005d6efe>] restart_int_handler+0x56/0x6c [<0000000000000000>] 0x0 Last Breaking-Event-Address: [<00000000003bf12e>] arch_spin_lock_wait+0x56/0xb0 Suggested-by: -
Varun Prakash authored
Do not post hw active open cmd if IFF_UP is not set or link is down on the interface, return -ENETDOWN in this case. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Varun Prakash authored
Add module_put() in cxgbi_sock_act_open_req_arp_failure() to release module reference in case of arp failure, also check return value of try_module_get() before posting active open hw cmd. Signed-off-by:
-
Varun Prakash authored
T6 adapters reduce number of completions to host by generating single completion for all the directly placed(DDP) iSCSI pdus in a sequence. This patch adds new structure for completion hw cmd (struct cpl_rx_iscsi_cmp) and implements T6 completion feature. Signed-off-by:
-
Varun Prakash authored
Add T6 active open cmd to open active connections on T6 adapters. Signed-off-by:
-
Varun Prakash authored
cxgb4_tp_smt_idx() is defined in cxgb4 driver, it returns smt_idx for T4,T5,T6 adapters. Signed-off-by:
-
Manish Rangankar authored
The QLogic FastLinQ Driver for iSCSI (qedi) is the iSCSI specific module for 41000 Series Converged Network Adapters by QLogic. This patch consists of following changes: - MAINTAINERS Makefile and Kconfig changes for qedi, - PCI driver registration, - iSCSI host level initialization, - Debugfs and log level infrastructure. The following indiviual changes are merged into this commit: qedi: Add LL2 iSCSI interface for offload iSCSI. qedi: Add support for iSCSI session management. qedi: Add support for data path. Signed-off-by:
Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by:
Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by:
Arun Easi <arun.easi@cavium.com> Signed-off-by:
Manish Rangankar <manish.rangankar@cavium.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper updates from Mike Snitzer: - various fixes and improvements to request-based DM and DM multipath - some locking improvements in DM bufio - add Kconfig option to disable the DM block manager's extra locking which mainly serves as a developer tool - a few bug fixes to DM's persistent-data - a couple changes to prepare for multipage biovec support in the block layer - various improvements and cleanups in the DM core, DM cache, DM raid and DM crypt - add ability to have DM crypt use keys from the kernel key retention service - add a new "error_writes" feature to the DM flakey target, reads are left unchanged in this mode * tag 'dm-4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (40 commits) dm flakey: introduce "error_writes" feature dm cache policy smq: use hash_32() instead of hash_32_generic() dm crypt: reject key strings containing whitespace chars dm space map: always set ev if sm_ll_mutate() succeeds dm space map metadata: skip useless memcpy in metadata_ll_init_index() dm space map metadata: fix 'struct sm_metadata' leak on failed create Documentation: dm raid: define data_offset status field dm raid: fix discard support regression dm raid: don't allow "write behind" with raid4/5/6 dm mpath: use hw_handler_params if attached hw_handler is same as requested dm crypt: add ability to use keys from the kernel key retention service dm array: remove a dead assignment in populate_ablock_with_values() dm ioctl: use offsetof() instead of open-coding it dm rq: simplify use_blk_mq initialization dm: use blk_set_queue_dying() in __dm_destroy() dm bufio: drop the lock when doing GFP_NOIO allocation dm bufio: don't take the lock in dm_bufio_shrink_count dm bufio: avoid sleeping while holding the dm_bufio lock dm table: simplify dm_table_determine_type() dm table: an 'all_blk_mq' table must be loaded for a blk-mq DM device ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds authored
Pull MD updates from Shaohua Li: - a raid5 writeback cache feature. The goal is to aggregate writes to make full stripe write and reduce read-modify-write. It's helpful for workload which does sequential write and follows fsync for example. This feature is experimental and off by default right now. - FAILFAST support. This fails IOs to broken raid disks quickly, so can improve latency. It's mainly for DASD storage, but some patches help normal raid array too. - support bad block for raid array with external metadata - AVX2 instruction support for raid6 parity calculation - normalize MD info output - add missing blktrace - other bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (66 commits) md: separate flags for superblock changes md: MD_RECOVERY_NEEDED is set for mddev->recovery md: takeover should clear unrelated bits md/r5cache: after recovery, increase journal seq by 10000 md/raid5-cache: fix crc in rewrite_data_only_stripes() md/raid5-cache: no recovery is required when create super-block md: fix refcount problem on mddev when stopping array. md/r5cache: do r5c_update_log_state after log recovery md/raid5-cache: adjust the write position of the empty block if no data blocks md/r5cache: run_no_space_stripes() when R5C_LOG_CRITICAL == 0 md/raid5: limit request size according to implementation limits md/raid5-cache: do not need to set STRIPE_PREREAD_ACTIVE repeatedly md/raid5-cache: remove the unnecessary next_cp_seq field from the r5l_log md/raid5-cache: release the stripe_head at the appropriate location md/raid5-cache: use ring add to prevent overflow md/raid5-cache: remove unnecessary function parameters raid5-cache: don't set STRIPE_R5C_PARTIAL_STRIPE flag while load stripe into cache raid5-cache: add another check conditon before replaying one stripe md/r5cache: enable IRQs on error path md/r5cache: handle alloc_page failure ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull another MMC update from Ulf Hansson: "Here's a second pull request for MMC for v4.10. As a matter of fact it's only one change that moves some mmc files around. I thought it was a good idea to get this into v4.10, as it gives us a nice and fresh base for v4.11. Summary: MMC core: - Move files from the card directory to the core directory to enable future clean-ups of the generic mmc header files and interfaces" * tag 'mmc-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: block: Move files to core -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, lpfc, hisi_sas, megaraid_sas, ufs, ibmvscsis, mpt3sas). There's also an assortment of minor fixes, mostly in error legs or other not very user visible stuff. The major change is the pci_alloc_irq_vectors replacement for the old pci_msix_.. calls; this effectively makes IRQ mapping generic for the drivers and allows blk_mq to use the information" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (256 commits) scsi: qla4xxx: switch to pci_alloc_irq_vectors scsi: hisi_sas: support deferred probe for v2 hw scsi: megaraid_sas: switch to pci_alloc_irq_vectors scsi: scsi_devinfo: remove synchronous ALUA for NETAPP devices scsi: be2iscsi: set errno on error path scsi: be2iscsi: set errno on error path scsi: hpsa: fallback to use legacy REPORT PHYS command scsi: scsi_dh_alua: Fix RCU annotations scsi: hpsa: use %phN for short hex dumps scsi: hisi_sas: fix free'ing in probe and remove scsi: isci: switch to pci_alloc_irq_vectors scsi: ipr: Fix runaway IRQs when falling back from MSI to LSI scsi: dpt_i2o: double free on error path scsi: cxlflash: Migrate scsi command pointer to AFU command scsi: cxlflash: Migrate IOARRIN specific routines to function pointers scsi: cxlflash: Cleanup queuecommand() scsi: cxlflash: Cleanup send_tmf() scsi: cxlflash: Remove AFU command lock scsi: cxlflash: Wait for active AFU commands to timeout upon tear down scsi: cxlflash: Remove private command pool ...
-
git://git.infradead.org/users/hch/configfsLinus Torvalds authored
Pull configfs update from Christoph Hellwig: "Just one simple change from Andrzej to drop the pointless return value from the ->drop_link method" * tag 'configfs-for-4.10' of git://git.infradead.org/users/hch/configfs: fs: configfs: don't return anything from drop_link
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 updates from Ted Ts'o: "This merge request includes the dax-4.0-iomap-pmd branch which is needed for both ext4 and xfs dax changes to use iomap for DAX. It also includes the fscrypt branch which is needed for ubifs encryption work as well as ext4 encryption and fscrypt cleanups. Lots of cleanups and bug fixes, especially making sure ext4 is robust against maliciously corrupted file systems --- especially maliciously corrupted xattr blocks and a maliciously corrupted superblock. Also fix ext4 support for 64k block sizes so it works well on ppcle. Fixed mbcache so we don't miss some common xattr blocks that can be merged" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits) dax: Fix sleep in atomic contex in grab_mapping_entry() fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FL fscrypt: Delay bounce page pool allocation until needed fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page() fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page() fscrypt: Never allocate fscrypt_ctx on in-place encryption fscrypt: Use correct index in decrypt path. fscrypt: move the policy flags and encryption mode definitions to uapi header fscrypt: move non-public structures and constants to fscrypt_private.h fscrypt: unexport fscrypt_initialize() fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info() fscrypto: move ioctl processing more fully into common code fscrypto: remove unneeded Kconfig dependencies MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patches ext4: do not perform data journaling when data is encrypted ext4: return -ENOMEM instead of success ext4: reject inodes with negative size ext4: remove another test in ext4_alloc_file_blocks() Documentation: fix description of ext4's block_validity mount option ext4: fix checks for data=ordered and journal_async_commit options ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "This patch series contains several performance tuning patches regarding to the IO submission flow, in addition to supporting new features such as a ZBC-base drive and multiple devices. It also includes some major bug fixes such as: - checkpoint version control - fdatasync-related roll-forward recovery routine - memory boundary or null-pointer access in corner cases - missing error cases It has various minor clean-up patches as well" * tag 'for-f2fs-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (66 commits) f2fs: fix a missing size change in f2fs_setattr f2fs: fix to access nullified flush_cmd_control pointer f2fs: free meta pages if sanity check for ckpt is failed f2fs: detect wrong layout f2fs: call sync_fs when f2fs is idle Revert "f2fs: use percpu_counter for # of dirty pages in inode" f2fs: return AOP_WRITEPAGE_ACTIVATE for writepage f2fs: do not activate auto_recovery for fallocated i_size f2fs: fix to determine start_cp_addr by sbi->cur_cp_pack f2fs: fix 32-bit build f2fs: set ->owner for debugfs status file's file_operations f2fs: fix incorrect free inode count in ->statfs f2fs: drop duplicate header timer.h f2fs: fix wrong AUTO_RECOVER condition f2fs: do not recover i_size if it's valid f2fs: fix fdatasync f2fs: fix to account total free nid correctly f2fs: fix an infinite loop when flush nodes in cp f2fs: don't wait writeback for datas during checkpoint f2fs: fix wrong written_valid_blocks counting ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlmLinus Torvalds authored
Pull dlm fixes from David Teigland: "This set fixes error reporting for dlm sockets, removes the unbound property on the dlm callback workqueue to improve performance, and includes a couple trivial changes" * tag 'dlm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix error return code in sctp_accept_from_sock() dlm: don't specify WQ_UNBOUND for the ast callback workqueue dlm: remove lock_sock to avoid scheduling while atomic dlm: don't save callbacks after accept dlm: audit and remove any unnecessary uses of module.h dlm: make genl_ops const
-
git://github.com/kleikamp/linux-shaggyLinus Torvalds authored
Pull jfs update from David Kleikamp: "The jfs piece of the current_time() series" * tag 'jfs-4.10' of git://github.com/kleikamp/linux-shaggy: fs: jfs: Replace CURRENT_TIME_SEC by current_time()
-
