- 11 Sep, 2013 40 commits
-
-
Minto Joseph authored
Fix mistake in the description of Committed_AS in kernel documentation. Signed-off-by:
Minto Joseph <mvaliyav@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andrey Vagin <avagin@openvz.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Stéphane Graber authored
Add a new %P variable to be used in core_pattern. This variable contains the global PID (PID in the init namespace) as %p contains the PID in the current namespace which isn't always what we want. The main use for this is to make it easier to handle crashes that happened within a container. With that new variables it's possible to have the crashes dumped into the container or forwarded to the host with the right PID (from the host's point of view). Signed-off-by:
Stéphane Graber <stgraber@ubuntu.com> Reported-by:
Hans Feldt <hans.feldt@ericsson.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Andy Whitcroft <apw@canonical.com> Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by:
-
Mark Grondona authored
__ptrace_may_access() checks get_dumpable/ptrace_has_cap/etc if task != current, this can can lead to surprising results. For example, a sub-thread can't readlink("/proc/self/exe") if the executable is not readable. setup_new_exec()->would_dump() notices that inode_permission(MAY_READ) fails and then it does set_dumpable(suid_dumpable). After that get_dumpable() fails. (It is not clear why proc_pid_readlink() checks get_dumpable(), perhaps we could add PTRACE_MODE_NODUMPABLE) Change __ptrace_may_access() to use same_thread_group() instead of "task == current". Any security check is pointless when the tasks share the same ->mm. Signed-off-by:Mark Grondona <mgrondona@llnl.gov> Signed-off-by:
Ben Woodard <woodard@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Vyacheslav Dubeyko authored
Integrate implemented POSIX ACLs support into hfsplus driver. Signed-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
-
Vyacheslav Dubeyko authored
Implement POSIX ACLs support in hfsplus driver. Signed-off-by:
-
Vyacheslav Dubeyko authored
This patchset implements POSIX ACLs support in hfsplus driver. Mac OS X beginning with version 10.4 ("Tiger") support NFSv4 ACLs, which are part of the NFSv4 standard. HFS+ stores ACLs in the form of specially named extended attributes (com.apple.system.Security). But this patchset doesn't use "com.apple.system.Security" extended attributes. It implements support of POSIX ACLs in the form of extended attributes with names "system.posix_acl_access" and "system.posix_acl_default". These xattrs are treated only under Linux. POSIX ACLs doesn't mean something under Mac OS X. Thereby, this patch set provides opportunity to use POSIX ACLs under Linux on HFS+ filesystem. This patch: Add CONFIG_HFSPLUS_FS_POSIX_ACL kernel configuration option, DBG_ACL_MOD debugging flag and acl.h file with declaration of essential functions for support POSIX ACLs in hfsplus driver. Signed-off-by: -
Julia Lawall authored
Convert the composition of devm_request_mem_region and devm_ioremap to a single call to devm_ioremap_resource. The associated call to platform_get_resource is also simplified and moved next to the new call to devm_ioremap_resource. This was done using a combination of the semantic patches devm_ioremap_resource.cocci and devm_request_and_ioremap.cocci, found in the scripts/coccinelle/api directory. In rtc-lpc32xx.c and rtc-mv.c, the local variable size is no longer needed. In rtc-ds1511.c the size field of the local structure is not useful any more, and is deleted. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Alexander Shiyan authored
Let RTC core decide if the retrieved time is invalid, instead of processing errors in the driver. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Alexander Shiyan authored
Private field "rtc" is not used outside "probe", so there is no reason to keep it. Signed-off-by:
-
Alexander Shiyan authored
Replace devm_request_mem_region() and devm_ioremap() with devm_ioremap_resource(). Signed-off-by:
-
Xianglong Du authored
enable_irq_wake() might fail, if so, we will see kernel warning in resume entries due to it always calls disable_irq_wake(). WARNING: at kernel/irq/manage.c:529 irq_set_irq_wake+0xc4/0xf0() Unbalanced IRQ 52 wake disable Modules linked in: ipv6 libcomposite configfs CPU: 0 PID: 1591 Comm: ash Tainted: G W 3.10.0-00854-gdbd86d4-dirty #100 (unwind_backtrace+0x0/0xf8) from (show_stack+0x10/0x14) (show_stack+0x10/0x14) from (warn_slowpath_common+0x54/0x68) (warn_slowpath_common+0x54/0x68) from (warn_slowpath_fmt+0x30/0x40) (warn_slowpath_fmt+0x30/0x40) from (irq_set_irq_wake+0xc4/0xf0) (irq_set_irq_wake+0xc4/0xf0) from (sirfsoc_rtc_restore+0x30/0x38) (sirfsoc_rtc_restore+0x30/0x38) from (platform_pm_restore+0x2c/0x50) (platform_pm_restore+0x2c/0x50) from (dpm_run_callback.clone.6+0x30/0xb0) (dpm_run_callback.clone.6+0x30/0xb0) from (device_resume+0x88/0x134) (device_resume+0x88/0x134) from (dpm_resume+0x114/0x230) (dpm_resume+0x114/0x230) from (hibernation_snapshot+0x178/0x1d0) (hibernation_snapshot+0x178/0x1d0) from (hibernate+0x130/0x1dc) (hibernate+0x130/0x1dc) from (state_store+0xb4/0xc0) (state_store+0xb4/0xc0) from (kobj_attr_store+0x14/0x20) (kobj_attr_store+0x14/0x20) from (sysfs_write_file+0xfc/0x17c) (sysfs_write_file+0xfc/0x17c) from (vfs_write+0xc8/0x194) (vfs_write+0xc8/0x194) from (SyS_write+0x40/0x6c) (SyS_write+0x40/0x6c) from (ret_fast_syscall+0x0/0x30) To avoid unbalanced "IRQ wake disable", ensure that disable_irq_wake() is called only when enable_irq_wake() have been successfully enabled. Signed-off-by:Xianglong Du <Xianglong.Du@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Signed-off-by:
-
Jingoo Han authored
check_rtc_access_enable() returns pointer, thus NULL should be used instead of 0 in order to fix the following sparse warning: drivers/rtc/rtc-nuc900.c:102:16: warning: Using plain integer as NULL pointer Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Sangjung Woo authored
Fix a read of the wrong register when checking whether the RTC timer has reached the alarm time. Signed-off-by:
Sangjung Woo <sangjung.woo@samsung.com> Signed-off-by:
Myugnjoo Ham <myungjoo.ham@samsung.com> Reviewed-by:
Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by:
-
Alexander Holler authored
Stop processing hid input when registering the RTC fails and handle a NULL returned from devm_rtc_device_register() as a failure too. Signed-off-by:
Alexander Holler <holler@ahsoftware.de> Signed-off-by:
-
Laxman Dewangan authored
Palmas series device like TPS65913, TPS80036 supports the backup battery for powering the RTC when no other energy source is available. The backup battery is optional, connected to the VBACKUP pin, and can be nonrechargeable or rechargeable. The rechargeable battery can be charged from the system supply using the backup battery charger. Add support for enabling charging of this backup battery. Also add the DT binding document and the new properties to have this support. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Acked-by:
Kumar Gala <galak@codeaurora.org> Signed-off-by:
-
Hebbar Gururaja authored
On some platforms (like AM33xx), a special register (RTC_IRQWAKEEN) is available to enable Alarm Wakeup feature. This register needs to be properly handled for the rtcwake to work properly. Platforms using such IP should set "ti,am3352-rtc" in rtc device dt compatibility node. Signed-off-by:
Hebbar Gururaja <gururaja.hebbar@ti.com> Acked-by:
Kevin Hilman <khilman@linaro.org> Acked-by:
Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Jonas Jensen authored
Add RTC driver for MOXA ART SoCs. Signed-off-by:
Jonas Jensen <jonas.jensen@gmail.com> Reviewed-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Sachin Kamat authored
The 'remove' function is empty and does not do anything. Delete it. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Alexander Holler authored
In order to get the module automatically loaded by hotplug mechanisms a MODULE_DEVICE_TABLE is needed. Therefore add one. This makes it also possible to use a module name other than HID-SENSOR-2000a0 which isn't very descriptive in kernel messages. Signed-off-by:
-
Heiko Carstens authored
With the general-instruction extension facility (z10) a couple of instructions with a pc-relative long displacement were introduced. The kprobes support for these instructions however was never implemented. In result, if anybody ever put a probe on any of these instructions the result would have been random behaviour after the instruction got executed within the insn slot. So lets add the missing handling for these instructions. Since all of the new instructions have 32 bit signed displacement the easiest solution is to allocate an insn slot that is within the same 2GB area like the original instruction and patch the displacement field. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
The current two insn slot caches both use module_alloc/module_free to allocate and free insn slot cache pages. For s390 this is not sufficient since there is the need to allocate insn slots that are either within the vmalloc module area or within dma memory. Therefore add a mechanism which allows to specify an own allocator for an own insn slot cache. Signed-off-by:
-
Heiko Carstens authored
The current kpropes insn caches allocate memory areas for insn slots with module_alloc(). The assumption is that the kernel image and module area are both within the same +/- 2GB memory area. This however is not true for s390 where the kernel image resides within the first 2GB (DMA memory area), but the module area is far away in the vmalloc area, usually somewhere close below the 4TB area. For new pc relative instructions s390 needs insn slots that are within +/- 2GB of each area. That way we can patch displacements of pc-relative instructions within the insn slots just like x86 and powerpc. The module area works already with the normal insn slot allocator, however there is currently no way to get insn slots that are within the first 2GB on s390 (aka DMA area). Therefore this patch set modifies the kprobes insn slot cache code in order to allow to specify a custom allocator for the insn slot cache pages. In addition architecure can now have private insn slot caches withhout the need to modify common code. Patch 1 unifies and simplifies the current insn and optinsn caches implementation. This is a preparation which allows to add more insn caches in a simple way. Patch 2 adds the possibility to specify a custom allocator. Patch 3 makes s390 use the new insn slot mechanisms and adds support for pc-relative instructions with long displacements. This patch (of 3): The two insn caches (insn, and optinsn) each have an own mutex and alloc/free functions (get_[opt]insn_slot() / free_[opt]insn_slot()). Since there is the need for yet another insn cache which satifies dma allocations on s390, unify and simplify the current implementation: - Move the per insn cache mutex into struct kprobe_insn_cache. - Move the alloc/free functions to kprobe.h so they are simply wrappers for the generic __get_insn_slot/__free_insn_slot functions. The implementation is done with a DEFINE_INSN_CACHE_OPS() macro which provides the alloc/free functions for each cache if needed. - move the struct kprobe_insn_cache to kprobe.h which allows to generate architecture specific insn slot caches outside of the core kprobes code. Signed-off-by: -
Jean Delvare authored
As reported by Joe Perches: OOM messages generally aren't useful. dmi_alloc is either a trivial front-end to kzalloc, and kzalloc already does a dump_stack() when OOM, or for x86, dmi_alloc uses extend_brk which BUGs when unsuccessful. So we can remove all 6 such log messages in the dmi_scan driver, to shrink the binary size (by 528 bytes on x86_64.) Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reported-by:
Joe Perches <joe@perches.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Jean Delvare authored
Add const to all DMI string pointers where this is possible. This fixes a checkpatch warning. Signed-off-by:
-
Jean Delvare authored
Fix all errors and trivial warnings reported by checkpatch for file drivers/firmware/dmi_scan.c. Signed-off-by:
-
Jean Delvare authored
This comment predates the introduction of early_ioremap. Since then the missing calls to dmi_iounmap have been added by Ingo and Yinghai in commits 0d64484f ("x86: fix DMI ioremap leak") and 3212bff3 ("x86: left over fix for leak of early_ioremp in dmi_scan") . That was over 5 years ago so it is about time to drop this now misleading comment. Signed-off-by:
-
Eric Dumazet authored
ep_free() might iterate on a huge set of epitems and hold cpu too long. Add two cond_resched() in order to yield cpu to other tasks. This is safe as we only hold mutexes in this function. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Acked-by:
Eric Wong <normalperson@yhbt.net> Signed-off-by:
-
Joe Perches authored
As discussed recently on the arm [1] and lm-sensors [2] lists, it is possible to use section markers on variables in a way which gcc doesn't understand (or at least not the way the developer intended): static struct __initdata samsung_pll_clock exynos4_plls[nr_plls] = { does NOT put exynos4_plls in the .initdata section. The __initdata marker can be virtually anywhere on the line, EXCEPT right after "struct". The preferred location is before the "=" sign if there is one, or before the trailing ";" otherwise. [1] http://permalink.gmane.org/gmane.linux.ports.arm.kernel/258149 [2] http://lists.lm-sensors.org/pipermail/lm-sensors/2013-August/039836.html So, update checkpatch to find these misuses and report an error when it's immediately after struct or union, and a warning when it's otherwise not immediately before the ; or =. A similar patch was suggested by Andi Kleen https://lkml.org/lkml/2013/8/5/648Signed-off-by:Jean Delvare <khali@linux-fr.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Joe Perches authored
A previous patch ("checkpatch: add --types option to report only specific message types") uses a perl syntax introduced in perl version 5.14. Use the backward compatible perl syntax instead. Signed-off-by: -
Joe Perches authored
There are some cases where checkpatch can take a long time to complete. Reduce the likelihood of this long run-time by adding a new test for lines with and without comments and eliminating checks on lines with only comments. This reduces the number of "ctx_statement_block" calls, and also the number of tests of $stat, which is now undefined for these blank lines. One test in particular, the "check for switch/default statements without a break", could take an extremely long time to parse as it tries to skip interleaving comments within the ctx_statement_block/$stat and that could be done multiple times unnecessarily. A small test case taken from cfg80211.h before this patch would take 1000's of seconds to run, now it's just a couple seconds. Signed-off-by:
-
Joe Perches authored
Previous attempt at fixing SPACING errors could make a hash of several defects. This patch should make --fix be a lot better at correcting these defects. Trim left and right sides of these defects appropriately instead of a somewhat random attempt at it. Trim left spaces from any following bit of the modified line when only a single space is required around an operator. Signed-off-by:
-
Joe Perches authored
The tracing subsystem uses slightly odd #defines to set path/directory locations for include files. These #defines can cause false positives for the complex macro tests so add exclusions for these specific #defines (TRACE_SYSTEM, TRACE_INCLUDE_FILE, TRACE_INCLUDE_PATH). Signed-off-by:
-
Joe Perches authored
Add a --types convenience option to show only specific message types. Combined with the --fix option, this can produce specific suggested formatting patches to files. Signed-off-by:
-
Joe Perches authored
checkpatch can generate a false positive when inserting a new kernel-doc block and function above an existing kernel-doc block. Fix it by checking that the context line is also a newly inserted line. Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Joe Perches authored
Using the extern keyword on function prototypes is superfluous visual noise so suggest removing it. Using extern can cause unnecessary line wrapping at 80 columns and unnecessarily long multi-line function prototypes. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Joe Perches authored
Emit a warning when a signature is used more than once. Signed-off-by:
-
Dave Hansen authored
I got a bug report from a couple of users who said checkpatch.pl was broken for them. It was erroring out on fairly random lines most commonly with messages like: Nested quantifiers in regex; marked by <--HERE in m/(\((?:[^\(\)]++ <-- HERE |(?-1))*\))/ at ./checkpatch.pl line 340. The bug reporter was running a version of perl 5.8 which was end-of-lifed in 2008: http://www.cpan.org/src/. Versions of perl this old are at _best_ quite untested. At worst, they are crusty and known to be completely broken. If folks have a system _that_ old, then we should have mercy on them and give them a half-decent error message rather than fail with nutty error messages. This patch enforces that checkpatch.pl is run with perl 5.10, which was end-of-lifed in 2009. The new --ignore-perl-version command-line switch will let folks override this if they want. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Joe Perches authored
$Lval is a test for complete name (ie: foo->bar.Baz[1]) If any of this is CamelCase, then the current test uses the entire $Lval. This isn't optimal because it can emit messages with foo->bar.Baz and bar.Baz when Baz is a variable specified in an include file. So instead, break the $Lval into words and check each word for CamelCase uses. Signed-off-by:
-
Joe Perches authored
Suggest a few more single-line corrections. Remove DOS line endings Simplify removing trailing whitespace Remove global/static initializations to 0/NULL Convert pr_warning to pr_warn Add space after brace Convert binary constants to hex Remove whitespace after line continuation Use inline not __inline or __inline__ Use __printf and __scanf Use a single ; for statement terminations Convert __FUNCTION__ to __func__ Signed-off-by:
-
