- 21 Oct, 2010 40 commits
-
-
Maxim Levitsky authored
Add new event types for timeout & carrier report Move timeout handling from ir_raw_event_store_with_filter to ir-lirc-codec, where it is really needed. Now lirc bridge ensures proper gap handling. Extend lirc bridge for carrier & timeout reports Note: all new ir_raw_event variables now should be initialized like that: DEFINE_IR_RAW_EVENT(ev); To clean an existing event, use init_ir_raw_event(&ev); Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Acked-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Derek Kelly authored
This patches adjusts the tuner delay to be longer in response to several users experiencing tuner timeouts. This change fixes that problem and allows those users to be able to tune. Signed-off-by:
Derek Kelly <user.vdr@gmail.com> Signed-off-by:
-
Derek Kelly authored
This patch updates the name of the dvb-usb-gp8psk driver from "Genpix 8psk-to-USB2 DVB-S" to "Genpix DVB-S". The old name doesn't reflect newer devices such as the Skywalker line which also user this driver. Signed-off-by:
-
Sven Barth authored
This adds support for the AUX_PLL in cx2583x chips which is available in those although the audio part of the chip is not. The AUX_PLL is used at least by Terratec in their Grabster AV400 device. Signed-off-by:
Sven Barth <pascaldragon@googlemail.com> Acked-by:
Mike Isely <isely@pobox.com> Reviewed-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Stephen Rothwell authored
Fixes these build errors and warnings: drivers/media/video/cx231xx/cx231xx-417.c: In function 'cx231xx_load_firmware': drivers/media/video/cx231xx/cx231xx-417.c:943: error: implicit declaration of function 'vmalloc' drivers/media/video/cx231xx/cx231xx-417.c:943: warning: cast to pointer from integer of different size drivers/media/video/cx231xx/cx231xx-417.c:950: warning: cast to pointer from integer of different size drivers/media/video/cx231xx/cx231xx-417.c:1039: error: implicit declaration of function 'vfree' Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au>
-
Hans Verkuil authored
The switch to the new control framework caused a regression where the audio was no longer unmuted after the carrier scan finished. The original code attempted to set the volume control to its current value in order to have the set-volume control code to be called that handles the volume and muting. However, the framework will not call that code unless the new volume value is different from the old. Instead we now call msp_s_ctrl directly. It is a bit of a hack: we really need a v4l2_ctrl_refresh_ctrl function for this (or something along those lines). Thanks to Andy Walls for bisecting this and to Shane Shrybman for reporting it! Reported-by:
Shane Shrybman <shrybman@teksavvy.com> Thanks-to: Andy Walls <awalls@md.metrocast.net> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Jean-François Moine authored
When audio is present, some alternate settings were skipped. This prevented some webcams to work, especially when bulk transfer was used. This patch permits to use the last or only alternate setting. Reported-by:
Antonio Ospite <ospite@studenti.unina.it> Tested-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Hans Verkuil authored
Siliconfile SR030PC30 VGA camera fails to compile with this error: drivers/media/video/sr030pc30.c: In function ‘sr030pc30_probe’: drivers/media/video/sr030pc30.c:834: error: implicit declaration of function ‘kzalloc’ drivers/media/video/sr030pc30.c:834: warning: assignment makes pointer from integer without a cast drivers/media/video/sr030pc30.c: In function ‘sr030pc30_remove’: drivers/media/video/sr030pc30.c:858: error: implicit declaration of function ‘kfree’ Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
-
Alan Young authored
Based on USB traces of the windows driver. Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
Janne Grunau authored
refine the firmware version test and print the version only once Signed-off-by:
-
Alan Young authored
Hauppauge released different firmwares using the same version number. The firmware date can be used to identify the exact driver/firmware combination. Signed-off-by:
-
Alan Young authored
Signed-off-by:
-
Alan Young authored
Signed-off-by:
-
James M McLaren authored
Necessary on arm. Signed-off-by:
-
Matti Aaltonen authored
Add spacing field to v4l2_hw_freq_seek. Add V4L2_TUNER_CAP_RDS_BLOCK_IO, which indicates that the tuner/ transmitter if capable of transmitting/receiving RDS blocks. Add V4L2_TUNER_CAP_RDS_CONTROLS capability, which indicates that the RDS data is handled as values of predefined controls like radio text, program ID and so on. Signed-off-by:
Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by:
-
Malcolm Priestley authored
Fixed problem with DiSEqC communication. The message was wrongly modulated, so the DiSEqC switch was not work. This patch fixes DiSEqC messages, simple tone burst and tone on/off. I verified it with osciloscope against the DiSEqC documentation. Interface: PCI DVB-S TV tuner TeVii S420 Kernel: 2.6.32-24-generic (UBUNTU 10.4) Signed-off-by:
Josef Pavlik <josef@pavlik.it> Tested-by:
Malcolm Priestley <tvboxspy@gmail.com> Cc: Igor M. Liplianin <liplianin@me.by> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Pawel Osciak authored
Remove unused is_userptr variable from videobuf-dma-contig. Signed-off-by:
Pawel Osciak <p.osciak@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Sergey Ivanov authored
Patch add support of TwinHan 1027 DVB-S card. Refreshed version of https://patchwork.kernel.org/patch/79753/ patch. (adapted for the new IR system), still works. DVB-S support come from a patch originally authored by Manu Abraham (abraham.manu@gmail.com). IR Port support were added by Sergey. Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
This patch also sets to 0 the sequence of the first frame. Signed-off-by:
-
Sylwester Nawrocki authored
Add an I2C/v4l2-subdev driver for Siliconfile SR030PC30 VGA camera sensor with Image Signal Processor. SR030PC30 is the low resolution camera sensor on Samsung Aquila boards. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Enable FIMC operation on S5PC210 (S5PV310) SoCs. This a minimal adaptation to obtain functionality of older FIMC IP revisions (S5PC100, S5PC110) on S5PC210 SOcs. Signed-off-by:
-
Sylwester Nawrocki authored
Add a video device driver per each FIMC entity to support the camera capture input mode. Video capture node is registered only if CCD sensor data is provided through driver's platfrom data and board setup code. Signed-off-by:
-
Sylwester Nawrocki authored
It is not necessary to lock both capture and output buffer queue while setting format for single queue. Signed-off-by:
-
Sylwester Nawrocki authored
Due to errorneous swapping of image dimensions the rotation control was not handled properly in subsequent calls. Signed-off-by:
-
Sylwester Nawrocki authored
Register access functions refactored for camera capture interface control. Removed the workqueue since it was only useful for FIFO output mode which is not supported at this time. Fixed errors on module unload. Comments and whitespace cleanup. Signed-off-by:
-
Sylwester Nawrocki authored
Add MIPI CSI format definitions, prepare DMA address definitions for interlaced input frame mode. Signed-off-by:
-
Guennadi Liakhovetski authored
No need to duplicate default .get_parm() and .set_parm() operations. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
This patch adds an initial driver for the IMXъ74 image sensor from Sony. Lacking documentation, only very basic functionality in one specific image format has been implemented and tested. Signed-off-by:
-
Guennadi Liakhovetski authored
Chip identification register contains the value 0x74. Signed-off-by:
-
Janusz Krzysztofik authored
This patch adds support for g_parm / s_parm operations to the SoC Camera framework. It is usefull for checking/setting camera frame rate. Example usage can be found in the previous patch from this series, "SoC Camera: add driver for OV6650 sensor". Created and tested against linux-2.6.36-rc3 on Amstrad Delta. Signed-off-by:
Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by:
-
Janusz Krzysztofik authored
This patch provides a V4L2 SoC Camera driver for OV6650 camera sensor, found on OMAP1 SoC based Amstrad Delta videophone. Since I have no experience with camera sensors, and the sensor documentation I was able to find was not very comprehensive, I left most settings at their default (reset) values, except for: - those required for proper mediabus parameters and picture geometry and format setup, - those used by controls. Resulting picture quality may be far from perfect, but better than nothing. In order to be able to get / set the sensor frame rate from userspace, I decided to provide two not yet SoC camera supported operations, g_parm and s_parm. These can be used after applying patch 4/6 from this series, "SoC Camera: add support for g_parm / s_parm operations". Created and tested against linux-2.6.36-rc5 on Amstrad Delta. Signed-off-by:
-
Janusz Krzysztofik authored
This is a V4L2 driver for TI OMAP1 SoC camera interface. Both videobuf-dma versions are supported, contig and sg, selectable with a module option. The former uses less processing power, but often fails to allocate contignuous buffer memory. The latter is free of this problem, but generates tens of DMA interrupts per frame. If contig memory allocation ever fails, the driver falls back to sg automatically on next open, but still can be switched back to contig manually. Both paths work stable for me, even under heavy load, on my OMAP1510 based Amstrad Delta videophone, that is the oldest, least powerfull OMAP1 implementation. The interface generally works in pass-through mode. Since input data byte endianess can be swapped, it provides up to two v4l2 pixel formats per each of several soc_mbus formats that have their swapped endian counterparts. Boards using this driver can provide it with the following platform data: - if and what freqency clock is expected by an on-board camera sensor, - what is the maximum pixel clock that should be accepted from the sensor, - what is the polarity of the sensor provided pixel clock, - if the interface GPIO line is connected to a sensor reset/powerdown input and what is the input polarity. Created and tested against linux-2.6.36-rc5 on Amstrad Delta. Signed-off-by:
-
Sascha Hauer authored
Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
