- 08 Oct, 2018 1 commit
-
-
Christian Borntraeger authored
no functional change, just hygiene. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com>
-
- 05 Oct, 2018 3 commits
-
-
Pierre Morel authored
We replace the vfio_ap_mdev_copy_masks() by the new kvm_arch_crypto_set_masks() to be able to use the standard KVM tracing system. Signed-off-by:
Pierre Morel <pmorel@linux.ibm.com> Message-Id: <1538728270-10340-3-git-send-email-pmorel@linux.ibm.com> Reviewed-by:
-
Pierre Morel authored
kvm_arch_crypto_set_masks is a new function to centralize the setup the APCB masks inside the CRYCB SIE satellite. To trace APCB mask changes, we add KVM_EVENT() tracing to both kvm_arch_crypto_set_masks and kvm_arch_crypto_clear_masks. Signed-off-by:
-
Christian Borntraeger authored
We need to unlock the kvm->lock mutex in the error case. Reported-by: smatch Fixes: 37940fb0 ("KVM: s390: device attrs to enable/disable AP interpretation") Signed-off-by:
Janosch Frank <frankja@linux.ibm.com> Reviewed-by:
-
- 28 Sep, 2018 16 commits
-
-
Tony Krowiak authored
This patch provides documentation describing the AP architecture and design concepts behind the virtualization of AP devices. It also includes an example of how to configure AP devices for exclusive use of KVM guests. Signed-off-by:
Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by:
Halil Pasic <pasic@linux.ibm.com> Message-Id: <20180925231641.4954-27-akrowiak@linux.vnet.ibm.com> Signed-off-by:
-
Tony Krowiak authored
Introduces two new CPU model facilities to support AP virtualization for KVM guests: 1. AP Query Configuration Information (QCI) facility is installed. This is indicated by setting facilities bit 12 for the guest. The kernel will not enable this facility for the guest if it is not set on the host. If this facility is not set for the KVM guest, then only APQNs with an APQI less than 16 will be used by a Linux guest regardless of the matrix configuration for the virtual machine. This is a limitation of the Linux AP bus. 2. AP Facilities Test facility (APFT) is installed. This is indicated by setting facilities bit 15 for the guest. The kernel will not enable this facility for the guest if it is not set on the host. If this facility is not set for the KVM guest, then no AP devices will be available to the guest regardless of the guest's matrix configuration for the virtual machine. This is a limitation of the Linux AP bus. Signed-off-by:
Michael Mueller <mimu@linux.ibm.com> Tested-by:
Farhan Ali <alifm@linux.ibm.com> Acked-by:
-
Tony Krowiak authored
Introduces two new VM crypto device attributes (KVM_S390_VM_CRYPTO) to enable or disable AP instruction interpretation from userspace via the KVM_SET_DEVICE_ATTR ioctl: * The KVM_S390_VM_CRYPTO_ENABLE_APIE attribute enables hardware interpretation of AP instructions executed on the guest. * The KVM_S390_VM_CRYPTO_DISABLE_APIE attribute disables hardware interpretation of AP instructions executed on the guest. In this case the instructions will be intercepted and pass through to the guest. Signed-off-by:
-
Pierre Morel authored
When the guest schedules a SIE with a FORMAT-0 CRYCB, we are able to schedule it in the host with a FORMAT-2 CRYCB if the host uses FORMAT-2 Signed-off-by:
-
Pierre Morel authored
When the guest schedules a SIE with a CRYCB FORMAT-1 CRYCB, we are able to schedule it in the host with a FORMAT-2 CRYCB if the host uses FORMAT-2. Signed-off-by:
-
Pierre Morel authored
When the guest schedules a SIE with a FORMAT-0 CRYCB, we are able to schedule it in the host with a FORMAT-1 CRYCB if the host uses FORMAT-1 or FORMAT-0. Signed-off-by:
-
Pierre Morel authored
When the host and the guest both use a FORMAT-0 CRYCB, we copy the guest's FORMAT-0 APCB to a shadow CRYCB for use by vSIE. Signed-off-by:
-
Pierre Morel authored
When the host and guest both use a FORMAT-1 CRYCB, we copy the guest's FORMAT-0 APCB to a shadow CRYCB for use by vSIE. Signed-off-by:
-
Pierre Morel authored
When the guest and the host both use CRYCB FORMAT-2, we copy the guest's FORMAT-1 APCB to a FORMAT-1 shadow APCB. This patch also cleans up the shadow_crycb() function. Signed-off-by:
-
Pierre Morel authored
The comment preceding the shadow_crycb function is misleading, we effectively accept FORMAT2 CRYCB in the guest. When using FORMAT2 in the host we do not need to or with FORMAT1. Signed-off-by:
-
Pierre Morel authored
We need to handle the validity checks for the crycb, no matter what the settings for the keywrappings are. So lets move the keywrapping checks after we have done the validy checks. Signed-off-by:
-
Pierre Morel authored
When we clear the Crypto Control Block (CRYCB) used by a guest level 2, the vSIE shadow CRYCB for guest level 3 must be updated before the guest uses it. We achieve this by using the KVM_REQ_VSIE_RESTART synchronous request for each vCPU belonging to the guest to force the reload of the shadow CRYCB before rerunning the guest level 3. Signed-off-by:
-
Tony Krowiak authored
Implements the VFIO_DEVICE_RESET ioctl. This ioctl zeroizes all of the AP queues assigned to the guest. Signed-off-by:
-
Tony Krowiak authored
Let's call PAPQ(ZAPQ) to zeroize a queue for each queue configured for a mediated matrix device when it is released. Zeroizing a queue resets the queue, clears all pending messages for the queue entries and disables adapter interruptions associated with the queue. Signed-off-by:
-
Tony Krowiak authored
Adds support for the VFIO_DEVICE_GET_INFO ioctl to the VFIO AP Matrix device driver. This is a minimal implementation, as vfio-ap does not use I/O regions. Signed-off-by:
-
Tony Krowiak authored
Implements the open callback on the mediated matrix device. The function registers a group notifier to receive notification of the VFIO_GROUP_NOTIFY_SET_KVM event. When notified, the vfio_ap device driver will get access to the guest's kvm structure. The open callback must ensure that only one mediated device shall be opened per guest. Signed-off-by:
-
- 26 Sep, 2018 10 commits
-
-
Tony Krowiak authored
Introduces a new KVM function to clear the APCB0 and APCB1 in the guest's CRYCB. This effectively clears all bits of the APM, AQM and ADM masks configured for the guest. The VCPUs are taken out of SIE to ensure the VCPUs do not get out of sync. Signed-off-by:
-
Tony Krowiak authored
Provides a sysfs interface to view the AP matrix configured for the mediated matrix device. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. matrix To view the matrix configured for the mediated matrix device, print the matrix file: cat matrix Below are examples of the output from the above command: Example 1: Adapters and domains assigned Assignments: Adapters 5 and 6 Domains 4 and 71 (0x47) Output 05.0004 05.0047 06.0004 06.0047 Examples 2: Only adapters assigned Assignments: Adapters 5 and 6 Output: 05. 06. Examples 3: Only domains assigned Assignments: Domains 4 and 71 (0x47) Output: .0004 .0047 Signed-off-by:
-
Tony Krowiak authored
Provides the sysfs interfaces for: 1. Assigning AP control domains to the mediated matrix device 2. Unassigning AP control domains from a mediated matrix device 3. Displaying the control domains assigned to a mediated matrix device The IDs of the AP control domains assigned to the mediated matrix device are stored in an AP domain mask (ADM). The bits in the ADM, from most significant to least significant bit, correspond to AP domain numbers 0 to 255. On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a control domain is assigned, the bit corresponding its domain ID will be set in the ADM. Likewise, when a domain is unassigned, the bit corresponding to its domain ID will be cleared in the ADM. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_control_domain .................. unassign_control_domain To assign a control domain to the $uuid mediated matrix device's ADM, write its domain number to the assign_control_domain file. To unassign a domain, write its domain number to the unassign_control_domain file. The domain number is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it is parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign control domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_control_domain or echo 0255 > assign_control_domain or echo 0xad > assign_control_domain To unassign control domain 173 (0xad): echo 173 > unassign_control_domain or echo 0255 > unassign_control_domain or echo 0xad > unassign_control_domain The assignment will be rejected if the APQI exceeds the maximum value for an AP domain: * If the AP Extended Addressing (APXA) facility is installed, the max value is 255 * Else the max value is 15 Signed-off-by: -
Tony Krowiak authored
Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP domains to and unassigning AP domains from a mediated matrix device. The IDs of the AP domains assigned to the mediated matrix device will be stored in an AP queue mask (AQM). The bits in the AQM, from most significant to least significant bit, correspond to AP queue index (APQI) 0 to 255 (note that an APQI is synonymous with with a domain ID). On some systems, the maximum allowable domain number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input domain ID exceeds the limit. When a domain is assigned, the bit corresponding to the APQI will be set in the AQM. Likewise, when a domain is unassigned, the bit corresponding to the APQI will be cleared from the AQM. In order to successfully assign a domain, the APQNs derived from the domain ID being assigned and the adapter numbers of all adapters previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device. If there are no adapters assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the domain ID (i.e., APQI), otherwise all adapters subsequently assigned will fail because there will be no AP queues bound with an APQN containing the APQI. Assigning or un-assigning an AP domain will also be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_domain .................. unassign_domain To assign a domain to the $uuid mediated matrix device, write the domain's ID to the assign_domain file. To unassign a domain, write the domain's ID to the unassign_domain file. The ID is specified using conventional semantics: If it begins with 0x, the number will be parsed as a hexadecimal (case insensitive) number; if it begins with 0, it will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign domain 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_domain or echo 0255 > assign_domain or echo 0xad > assign_domain To unassign domain 173 (0xad): echo 173 > unassign_domain or echo 0255 > unassign_domain or echo 0xad > unassign_domain Signed-off-by:
-
Tony Krowiak authored
Introduces two new sysfs attributes for the VFIO mediated matrix device for assigning AP adapters to and unassigning AP adapters from a mediated matrix device. The IDs of the AP adapters assigned to the mediated matrix device will be stored in an AP mask (APM). The bits in the APM, from most significant to least significant bit, correspond to AP adapter IDs (APID) 0 to 255. On some systems, the maximum allowable adapter number may be less than 255 - depending upon the host's AP configuration - and assignment may be rejected if the input adapter ID exceeds the limit. When an adapter is assigned, the bit corresponding to the APID will be set in the APM. Likewise, when an adapter is unassigned, the bit corresponding to the APID will be cleared from the APM. In order to successfully assign an adapter, the APQNs derived from the adapter ID being assigned and the queue indexes of all domains previously assigned: 1. Must be bound to the vfio_ap device driver. 2. Must not be assigned to any other mediated matrix device If there are no domains assigned to the mdev, then there must be an AP queue bound to the vfio_ap device driver with an APQN containing the APID, otherwise all domains subsequently assigned will fail because there will be no AP queues bound with an APQN containing the adapter ID. Assigning or un-assigning an AP adapter will be rejected if a guest using the mediated matrix device is running. The relevant sysfs structures are: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ...............[$uuid] .................. assign_adapter .................. unassign_adapter To assign an adapter to the $uuid mediated matrix device's APM, write the APID to the assign_adapter file. To unassign an adapter, write the APID to the unassign_adapter file. The APID is specified using conventional semantics: If it begins with 0x the number will be parsed as a hexadecimal number; if it begins with a 0 the number will be parsed as an octal number; otherwise, it will be parsed as a decimal number. For example, to assign adapter 173 (0xad) to the mediated matrix device $uuid: echo 173 > assign_adapter or echo 0xad > assign_adapter or echo 0255 > assign_adapter To unassign adapter 173 (0xad): echo 173 > unassign_adapter or echo 0xad > unassign_adapter or echo 0255 > unassign_adapter Signed-off-by:
-
Tony Krowiak authored
Registers the matrix device created by the VFIO AP device driver with the VFIO mediated device framework. Registering the matrix device will create the sysfs structures needed to create mediated matrix devices each of which will be used to configure the AP matrix for a guest and connect it to the VFIO AP device driver. Registering the matrix device with the VFIO mediated device framework will create the following sysfs structures: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ create To create a mediated device for the AP matrix device, write a UUID to the create file: uuidgen > create A symbolic link to the mediated device's directory will be created in the devices subdirectory named after the generated $uuid: /sys/devices/vfio_ap/matrix/ ...... [mdev_supported_types] ......... [vfio_ap-passthrough] ............ [devices] ............... [$uuid] A symbolic link to the mediated device will also be created in the vfio_ap matrix's directory: /sys/devices/vfio_ap/matrix/[$uuid] Signed-off-by:
-
Tony Krowiak authored
Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: -
Tony Krowiak authored
This patch refactors the code that initializes and sets up the crypto configuration for a guest. The following changes are implemented via this patch: 1. Introduces a flag indicating AP instructions executed on the guest shall be interpreted by the firmware. This flag is used to set a bit in the guest's state description indicating AP instructions are to be interpreted. 2. Replace code implementing AP interfaces with code supplied by the AP bus to query the AP configuration. Signed-off-by:
-
David Hildenbrand authored
When we change the crycb (or execution controls), we also have to make sure that the vSIE shadow datastructures properly consider the changed values before rerunning the vSIE. We can achieve that by simply using a VCPU request now. This has to be a synchronous request (== handled before entering the (v)SIE again). The request will make sure that the vSIE handler is left, and that the request will be processed (NOP), therefore forcing a reload of all vSIE data (including rebuilding the crycb) when re-entering the vSIE interception handler the next time. Signed-off-by:
-
David Hildenbrand authored
VCPU requests and VCPU blocking right now don't take care of the vSIE (as it was not necessary until now). But we want to have synchronous VCPU requests that will also be handled before running the vSIE again. So let's simulate a SIE entry of the VCPU when calling the sie during vSIE handling and check for PROG_ flags. The existing infrastructure (e.g. exit_sie()) will then detect that the SIE (in form of the vSIE) is running and properly kick the vSIE CPU, resulting in it leaving the vSIE loop and therefore the vSIE interception handler, allowing it to handle VCPU requests. E.g. if we want to modify the crycb of the VCPU and make sure that any masks also get applied to the VSIE crycb shadow (which uses masks from the VCPU crycb), we will need a way to hinder the vSIE from running and make sure to process the updated crycb before reentering the vSIE again. Signed-off-by:
-
- 16 Sep, 2018 2 commits
-
-
Linus Torvalds authored
-
Greg Kroah-Hartman authored
The Code of Conflict is not achieving its implicit goal of fostering civility and the spirit of 'be excellent to each other'. Explicit guidelines have demonstrated success in other projects and other areas of the kernel. Here is a Code of Conduct statement for the wider kernel. It is based on the Contributor Covenant as described at www.contributor-covenant.org From this point forward, we should abide by these rules in order to help make the kernel community a welcoming environment to participate in. Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Olof Johansson <olof@lxom.net> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 15 Sep, 2018 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingol Molnar: "Misc fixes: - EFI crash fix - Xen PV fixes - do not allow PTI on 2-level 32-bit kernels for now - documentation fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/APM: Fix build warning when PROC_FS is not enabled Revert "x86/mm/legacy: Populate the user page-table with user pgd's" x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3 x86/xen: Disable CPU0 hotplug for Xen PV x86/EISA: Don't probe EISA bus for Xen PV guests x86/doc: Fix Documentation/x86/earlyprintk.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Misc fixes: various scheduler metrics corner case fixes, a sched_features deadlock fix, and a topology fix for certain NUMA systems" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix kernel-doc notation warning sched/fair: Fix load_balance redo for !imbalance sched/fair: Fix scale_rt_capacity() for SMT sched/fair: Fix vruntime_normalized() for remote non-migration wakeup sched/pelt: Fix update_blocked_averages() for RT and DL classes sched/topology: Set correct NUMA topology type sched/debug: Fix potential deadlock when writing to sched_features
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also breakpoint and x86 PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) perf tools: Fix maps__find_symbol_by_name() tools headers uapi: Update tools's copy of linux/if_link.h tools headers uapi: Update tools's copy of linux/vhost.h tools headers uapi: Update tools's copies of kvm headers tools headers uapi: Update tools's copy of drm/drm.h tools headers uapi: Update tools's copy of asm-generic/unistd.h tools headers uapi: Update tools's copy of linux/perf_event.h perf/core: Force USER_DS when recording user stack data perf/UAPI: Clearly mark __PERF_SAMPLE_CALLCHAIN_EARLY as internal use perf/x86/intel: Add support/quirk for the MISPREDICT bit on Knights Landing CPUs perf annotate: Fix parsing aarch64 branch instructions after objdump update perf probe powerpc: Ignore SyS symbols irrespective of endianness perf event-parse: Use fixed size string for comms perf util: Fix bad memory access in trace info. perf tools: Streamline bpf examples and headers installation perf evsel: Fix potential null pointer dereference in perf_evsel__new_idx() perf arm64: Fix include path for asm-generic/unistd.h perf/hw_breakpoint: Simplify breakpoint enable in perf_event_modify_breakpoint perf/hw_breakpoint: Enable breakpoint in modify_user_hw_breakpoint perf/hw_breakpoint: Remove superfluous bp->attr.disabled = 0 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Misc fixes: liblockdep fixes and ww_mutex fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/ww_mutex: Fix spelling mistake "cylic" -> "cyclic" locking/lockdep: Delete unnecessary #include tools/lib/lockdep: Add dummy task_struct state member tools/lib/lockdep: Add empty nmi.h tools/lib/lockdep: Update Sasha Levin email to MSFT jump_label: Fix typo in warning message locking/mutex: Fix mutex debug call and ww_mutex documentation
-
Randy Dunlap authored
Fix build warning in apm_32.c when CONFIG_PROC_FS is not enabled: ../arch/x86/kernel/apm_32.c:1643:12: warning: 'proc_apm_show' defined but not used [-Wunused-function] static int proc_apm_show(struct seq_file *m, void *v) Fixes: 3f3942ac ("proc: introduce proc_create_single{,_data}") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Jiri Kosina <jikos@kernel.org> Link: https://lkml.kernel.org/r/be39ac12-44c2-4715-247f-4dcc3c525b8b@infradead.org
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Fixes for four CIFS/SMB3 potential pointer overflow issues, one minor build fix, and a build warning cleanup" * tag '4.19-rc3-smb3-cifs' of git://git.samba.org/sfrench/cifs-2.6: cifs: read overflow in is_valid_oplock_break() cifs: integer overflow in in SMB2_ioctl() CIFS: fix wrapping bugs in num_entries() cifs: prevent integer overflow in nxt_dir_entry() fs/cifs: require sha512 fs/cifs: suppress a string overflow warning
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Anna Schumaker: "These are a handful of fixes for problems that Trond found. Patch #1 and #3 have the same name, a second issue was found after applying the first patch. Stable bugfixes: - v4.17+: Fix tracepoint Oops in initiate_file_draining() - v4.11+: Fix an infinite loop on I/O Other fixes: - Return errors if a waiting layoutget is killed - Don't open code clearing of delegation state" * tag 'nfs-for-4.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Don't open code clearing of delegation state NFSv4.1 fix infinite loop on I/O. NFSv4: Fix a tracepoint Oops in initiate_file_draining() pNFS: Ensure we return the error if someone kills a waiting layoutget NFSv4: Fix a tracepoint Oops in initiate_file_draining()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "This fixes an issue with the build system caused by a change that modifies CC_FLAGS_FTRACE. The issue is that it breaks the dependencies and causes "make targz-pkg" to rebuild the entire world" * tag 'trace-v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/Makefile: Fix handling redefinition of CC_FLAGS_FTRACE
-
