- 21 Nov, 2014 3 commits
-
-
Steffen Klassert authored
[ Upstream commit 16a0231b ] vti6_dev_init() sets the dev->iflink via a call to vti6_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for vti6 tunnels. Fix this by using vti6_dev_init() as the ndo_init function. Then vti6_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steffen Klassert authored
[ Upstream commit 6c6151da ] ip6_tnl_dev_init() sets the dev->iflink via a call to ip6_tnl_link_config(). After that, register_netdevice() sets dev->iflink = -1. So we loose the iflink configuration for ipv6 tunnels. Fix this by using ip6_tnl_dev_init() as the ndo_init function. Then ip6_tnl_dev_init() is called after dev->iflink is set to -1 from register_netdevice(). Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 2b52d6c6 which was commit 3d0ad094 upstream. Ben writes: Please drop this patch for 3.14 and 3.17. It causes problems for migration of VMs and we're probably going to revert part of this. The following patch ("drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets") might no longer apply, in which case you can drop that as well until we have this sorted out upstream. Cc: Ben Hutchings <ben@decadent.org.uk> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 14 Nov, 2014 37 commits
-
-
Greg Kroah-Hartman authored
-
Johannes Weiner authored
commit abe5f972 upstream. The zone allocation batches can easily underflow due to higher-order allocations or spills to remote nodes. On SMP that's fine, because underflows are expected from concurrency and dealt with by returning 0. But on UP, zone_page_state will just return a wrapped unsigned long, which will get past the <= 0 check and then consider the zone eligible until its watermarks are hit. Commit 3a025760 ("mm: page_alloc: spill to remote nodes before waking kswapd") already made the counter-resetting use atomic_long_read() to accomodate underflows from remote spills, but it didn't go all the way with it. Make it clear that these batches are expected to go negative regardless of concurrency, and use atomic_long_read() everywhere. Fixes: 81c0a2bb ("mm: page_alloc: fair zone allocator policy") Reported-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Mel Gorman <mgorman@suse.de> Cc: <stable@vger.kernel.org> [3.12+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Chris Mason authored
commit 6e5aafb2 upstream. If we hit any errors in btrfs_lookup_csums_range, we'll loop through all the csums we allocate and free them. But the code was using list_entry incorrectly, and ended up trying to free the on-stack list_head instead. This bug came from commit 0678b618 btrfs: Don't BUG_ON kzalloc error in btrfs_lookup_csums_range() Signed-off-by:
Chris Mason <clm@fb.com> Reported-by:
Erik Berg <btrfs@slipsprogrammoer.no> Signed-off-by:
-
Grant Likely authored
commit a87fa1d8 upstream. The string property read helpers will run off the end of the buffer if it is handed a malformed string property. Rework the parsers to make sure that doesn't happen. At the same time add new test cases to make sure the functions behave themselves. The original implementations of of_property_read_string_index() and of_property_count_strings() both open-coded the same block of parsing code, each with it's own subtly different bugs. The fix here merges functions into a single helper and makes the original functions static inline wrappers around the helper. One non-bugfix aspect of this patch is the addition of a new wrapper, of_property_read_string_array(). The new wrapper is needed by the device_properties feature that Rafael is working on and planning to merge for v3.19. The implementation is identical both with and without the new static inline wrapper, so it just got left in to reduce the churn on the header file. Signed-off-by:
Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darren Hart <darren.hart@intel.com> Signed-off-by:
-
Yijing Wang authored
commit e4a60d13 upstream. There is a race condition when removing glue directory. It can be reproduced in following test: path 1: Add first child device device_add() get_device_parent() /*find parent from glue_dirs.list*/ list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry) if (k->parent == parent_kobj) { kobj = kobject_get(k); break; } .... class_dir_create_and_add() path2: Remove last child device under glue dir device_del() cleanup_device_parent() cleanup_glue_dir() kobject_put(glue_dir); If path2 has been called cleanup_glue_dir(), but not call kobject_put(glue_dir), the glue dir is still in parent's kset list. Meanwhile, path1 find the glue dir from the glue_dirs.list. Path2 may release glue dir before path1 call kobject_get(). So kernel will report the warning and bug_on. This is a "classic" problem we have of a kref in a list that can be found while the last instance could be removed at the same time. This patch reuse gdp_mutex to fix this race condition. The following calltrace is captured in kernel 3.4, but the latest kernel still has this bug. ----------------------------------------------------- <4>[ 3965.441471] WARNING: at ...include/linux/kref.h:41 kobject_get+0x33/0x40() <4>[ 3965.441474] Hardware name: Romley <4>[ 3965.441475] Modules linked in: isd_iop(O) isd_xda(O)... ... <4>[ 3965.441605] Call Trace: <4>[ 3965.441611] [<ffffffff8103717a>] warn_slowpath_common+0x7a/0xb0 <4>[ 3965.441615] [<ffffffff810371c5>] warn_slowpath_null+0x15/0x20 <4>[ 3965.441618] [<ffffffff81215963>] kobject_get+0x33/0x40 <4>[ 3965.441624] [<ffffffff812d1e45>] get_device_parent.isra.11+0x135/0x1f0 <4>[ 3965.441627] [<ffffffff812d22d4>] device_add+0xd4/0x6d0 <4>[ 3965.441631] [<ffffffff812d0dbc>] ? dev_set_name+0x3c/0x40 .... <2>[ 3965.441912] kernel BUG at ..../fs/sysfs/group.c:65! <4>[ 3965.441915] invalid opcode: 0000 [#1] SMP ... <4>[ 3965.686743] [<ffffffff811a677e>] sysfs_create_group+0xe/0x10 <4>[ 3965.686748] [<ffffffff810cfb04>] blk_trace_init_sysfs+0x14/0x20 <4>[ 3965.686753] [<ffffffff811fcabb>] blk_register_queue+0x3b/0x120 <4>[ 3965.686756] [<ffffffff812030bc>] add_disk+0x1cc/0x490 .... ------------------------------------------------------- Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
Weng Meiling <wengmeiling.weng@huawei.com> Signed-off-by:
-
Wolfram Sang authored
commit 11cfbfb0 upstream. iowait is for blkio [1]. I2C shouldn't use it. [1] https://lkml.org/lkml/2014/11/3/317Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit ca0c37a0 upstream. Driver allocated on stack struct regulator_config but didn't initialize it fully. Few fields (driver_data, ena_gpio) were left untouched. This lead to using random ena_gpio values as GPIOs for max77693 regulators. On occasion these values could match real GPIO numbers leading to interfering with other drivers and to unsuccessful enable/disable of regulator. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 80b022e2 ("regulator: max77693: Add max77693 regualtor driver.") Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Dan Streetman authored
commit 10ccaf17 upstream. In powerpc pseries platform dlpar operations, use device_online() and device_offline() instead of cpu_up() and cpu_down(). Calling cpu_up/down() directly does not update the cpu device offline field, which is used to online/offline a cpu from sysfs. Calling device_online/offline() instead keeps the sysfs cpu online value correct. The hotplug lock, which is required to be held when calling device_online/offline(), is already held when dlpar_online/offline_cpu() are called, since they are called only from cpu_probe|release_store(). This patch fixes errors on phyp (PowerVM) systems that have cpu(s) added/removed using dlpar operations; without this patch, the /sys/devices/system/cpu/cpuN/online nodes do not correctly show the online state of added/removed cpus. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Fixes: 0902a904 ("Driver core: Use generic offline/online for CPU offline/online") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
David Cohen authored
commit d90c3381 upstream. Even if a gpio pin is set to output, we still need to set INPUT_EN functionality (by clearing INPUT_EN bit) to be able to read the pin's level. E.g. without this change, we'll always read low level state from sysfs. Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
David Cohen <david.a.cohen@linux.intel.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Hans de Goede authored
commit 183fd8fc upstream. The acpi-video backlight interface on the Acer KAV80 is broken, and worse it causes the entire machine to slow down significantly after a suspend/resume. Blacklist it, and use the acer-wmi backlight interface instead. Note that the KAV80 is somewhat unique in that it is the only Acer model where we fall back to acer-wmi after blacklisting, rather then using the native (e.g. intel) backlight driver. This is done because there is no native backlight interface on this model. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1128309Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Jan Kara authored
commit a8d42056 upstream. When we fail to allocate page vector in rbd_obj_read_sync() we just basically ignore the problem and continue which will result in an oops later. Fix the problem by returning proper error. CC: Yehuda Sadeh <yehuda@inktank.com> CC: Sage Weil <sage@inktank.com> CC: ceph-devel@vger.kernel.org Coverity-id: 1226882 Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Ilya Dryomov <idryomov@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 8c3e4347 upstream. 0x4c6e is a secondary device id so should not be used by the driver. Noticed-by:
Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 6fa45593 upstream. Causes problems on some boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=82889Signed-off-by:
-
Sinclair Yeh authored
commit 9a72384d upstream. When screen objects are enabled, the bpp is assumed to be 32, otherwise it is set to 16. v2: * Use u32 instead of u64 for assumed_bpp. * Fixed mechanism to check for screen objects * Limit the back buffer size to VRAM. Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Kirill Tkhai authored
commit f1e3a093 upstream. Probability of use-after-free isn't zero in this place. Signed-off-by:
Kirill Tkhai <ktkhai@parallels.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140922183636.11015.83611.stgit@localhostSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Robert Baldyga authored
[ Upstream commit a3058a5d ] During FunctionFS bind, ffs_data_get() function was called twice (in functionfs_bind() and in ffs_do_functionfs_bind()), while on unbind ffs_data_put() was called once (in functionfs_unbind() function). In result refcount never reached value 0, and ffs memory resources has been never released. Since ffs_data_get() call in ffs_do_functionfs_bind() is redundant and not neccessary, we remove it to have equal number of gets ans puts, and free allocated memory after refcount reach 0. Fixes: 5920cda6 (usb: gadget: FunctionFS: convert to new function interface with backward compatibility) Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit bfa6b18c ] Currently, there's no guarantee that udc->driver will be valid when using soft_connect sysfs interface. In fact, we can very easily trigger a NULL pointer dereference by trying to disconnect when a gadget driver isn't loaded. Fix this bug: ~# echo disconnect > soft_connect [ 33.685743] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 33.694221] pgd = ed0cc000 [ 33.697174] [00000014] *pgd=ae351831, *pte=00000000, *ppte=00000000 [ 33.703766] Internal error: Oops: 17 [#1] SMP ARM [ 33.708697] Modules linked in: xhci_plat_hcd xhci_hcd snd_soc_davinci_mcasp snd_soc_tlv320aic3x snd_soc_edma snd_soc_omap snd_soc_evm snd_soc_core dwc3 snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd lis3lv02d_i2c matrix_keypad lis3lv02d dwc3_omap input_polldev soundcore [ 33.734372] CPU: 0 PID: 1457 Comm: bash Not tainted 3.17.0-09740-ga93416e-dirty #345 [ 33.742457] task: ee71ce00 ti: ee68a000 task.ti: ee68a000 [ 33.748116] PC is at usb_udc_softconn_store+0xa4/0xec [ 33.753416] LR is at mark_held_locks+0x78/0x90 [ 33.758057] pc : [<c04df128>] lr : [<c00896a4>] psr: 20000013 [ 33.758057] sp : ee68bec8 ip : c0c00008 fp : ee68bee4 [ 33.770050] r10: ee6b394c r9 : ee68bf80 r8 : ee6062c0 [ 33.775508] r7 : 00000000 r6 : ee6062c0 r5 : 0000000b r4 : ee739408 [ 33.782346] r3 : 00000000 r2 : 00000000 r1 : ee71d390 r0 : ee664170 [ 33.789168] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 33.796636] Control: 10c5387d Table: ad0cc059 DAC: 00000015 [ 33.802638] Process bash (pid: 1457, stack limit = 0xee68a248) [ 33.808740] Stack: (0xee68bec8 to 0xee68c000) [ 33.813299] bec0: 0000000b c0411284 ee6062c0 00000000 ee68bef4 ee68bee8 [ 33.821862] bee0: c04112ac c04df090 ee68bf14 ee68bef8 c01c2868 c0411290 0000000b ee6b3940 [ 33.830419] bf00: 00000000 00000000 ee68bf4c ee68bf18 c01c1a24 c01c2818 00000000 00000000 [ 33.838990] bf20: ee61b940 ee2f47c0 0000000b 000ce408 ee68bf80 c000f304 ee68a000 00000000 [ 33.847544] bf40: ee68bf7c ee68bf50 c0152dd8 c01c1960 ee68bf7c c0170af8 ee68bf7c ee2f47c0 [ 33.856099] bf60: ee2f47c0 000ce408 0000000b c000f304 ee68bfa4 ee68bf80 c0153330 c0152d34 [ 33.864653] bf80: 00000000 00000000 0000000b 000ce408 b6e7fb50 00000004 00000000 ee68bfa8 [ 33.873204] bfa0: c000f080 c01532e8 0000000b 000ce408 00000001 000ce408 0000000b 00000000 [ 33.881763] bfc0: 0000000b 000ce408 b6e7fb50 00000004 0000000b 00000000 000c5758 00000000 [ 33.890319] bfe0: 00000000 bec2c924 b6de422d b6e1d226 40000030 00000001 75716d2f 00657565 [ 33.898890] [<c04df128>] (usb_udc_softconn_store) from [<c04112ac>] (dev_attr_store+0x28/0x34) [ 33.907920] [<c04112ac>] (dev_attr_store) from [<c01c2868>] (sysfs_kf_write+0x5c/0x60) [ 33.916200] [<c01c2868>] (sysfs_kf_write) from [<c01c1a24>] (kernfs_fop_write+0xd0/0x194) [ 33.924773] [<c01c1a24>] (kernfs_fop_write) from [<c0152dd8>] (vfs_write+0xb0/0x1bc) [ 33.932874] [<c0152dd8>] (vfs_write) from [<c0153330>] (SyS_write+0x54/0xb0) [ 33.940247] [<c0153330>] (SyS_write) from [<c000f080>] (ret_fast_syscall+0x0/0x48) [ 33.948160] Code: e1a01007 e12fff33 e5140004 e5143008 (e5933014) [ 33.954625] ---[ end trace f849bead94eab7ea ]--- Fixes: 2ccea03a (usb: gadget: introduce UDC Class) Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 52ec49a5 ] During Halt Endpoint Test, our interrupt endpoint will be disabled, which will clear out ep->desc to NULL. Unless we call config_ep_by_speed() again, we will not be able to enable this endpoint which will make us fail that test. Fixes: f9c56cdd (usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep on disable) Signed-off-by:
-
Felipe Balbi authored
[ Upstream commit 7a608559 ] According to our Gadget Framework API documentation, ->set_halt() *must* return -EAGAIN if we have pending transfers (on either direction) or FIFO isn't empty (on TX endpoints). Fix this bug so that the mass storage gadget can be used without stall=0 parameter. This patch should be backported to all kernels since v3.2. Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ondrej Kozina authored
commit e2cffb5f upstream. On archs with PAGE_SIZE >= 64 KiB the function skcipher_alloc_sgl() fails with -ENOMEM no matter what user space actually requested. This is caused by the fact sock_kmalloc call inside the function tried to allocate more memory than allowed by the default kernel socket buffer size (kernel param net.core.optmem_max). Signed-off-by:
Ondrej Kozina <okozina@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jan Kara authored
commit f55fefd1 upstream. The WARN_ON checking whether i_mutex is held in pagecache_isize_extended() was wrong because some filesystems (e.g. XFS) use different locks for serialization of truncates / writes. So just remove the check. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Andy Lutomirski authored
commit b47dcbdc upstream. If the TSC is unusable or disabled, then this patch fixes: - Confusion while trying to clear old APIC interrupts. - Division by zero and incorrect programming of the TSC deadline timer. This fixes boot if the CPU has a TSC deadline timer but a missing or broken TSC. The failure to boot can be observed with qemu using -cpu qemu64,-tsc,+tsc-deadline This also happens to me in nested KVM for unknown reasons. With this patch, I can boot cleanly (although without a TSC). Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Bandan Das <bsd@redhat.com> Link: http://lkml.kernel.org/r/e2fa274e498c33988efac0ba8b7e3120f7f92d78.1413393027.git.luto@amacapital.netSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Mathias Krause authored
commit 6891c450 upstream. If userland creates a timer without specifying a sigevent info, we'll create one ourself, using a stack local variable. Particularly will we use the timer ID as sival_int. But as sigev_value is a union containing a pointer and an int, that assignment will only partially initialize sigev_value on systems where the size of a pointer is bigger than the size of an int. On such systems we'll copy the uninitialized stack bytes from the timer_create() call to userland when the timer actually fires and we're going to deliver the signal. Initialize sigev_value with 0 to plug the stack info leak. Found in the PaX patch, written by the PaX Team. Fixes: 5a9fa730 ("posix-timers: kill ->it_sigev_signo and...") Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Brad Spengler <spender@grsecurity.net> Cc: PaX Team <pageexec@freemail.hu> Link: http://lkml.kernel.org/r/1412456799-32339-1-git-send-email-minipli@googlemail.comSigned-off-by:
-
Karl Beldan authored
commit c7abf25a upstream. It affects non-(V)HT rates and can lead to selecting an rts_cts rate that is not a basic rate or way superior to the reference rate (ATM rates[0] used for the 1st attempt of the protected frame data). E.g, assuming drivers register growing (bitrate) sorted tables of ieee80211_rate-s, having : - rates[0].idx == d'2 and basic_rates == b'10100 will select rts_cts idx b'10011 & ~d'(BIT(2)-1), i.e. 1, likewise - rates[0].idx == d'2 and basic_rates == b'10001 will select rts_cts idx b'10000 The first is not a basic rate and the second is > rates[0]. Also, wrt severity of the addressed misbehavior, ATM we only have one rts_cts_rate_idx rather than one per rate table entry, so this idx might still point to bitrates > rates[1..MAX_RATES]. Fixes: 5253ffb8 ("mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates") Signed-off-by:
Karl Beldan <karl.beldan@rivierawaves.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Imre Deak authored
commit 94fb823f upstream. If a device's dev_pm_ops::freeze callback fails during the QUIESCE phase, we don't rollback things correctly calling the thaw and complete callbacks. This could leave some devices in a suspended state in case of an error during resuming from hibernation. Signed-off-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Peter Hurley authored
commit 37b16457 upstream. Kernel oops can cause the tty to be unreleaseable (for example, if n_tty_read() crashes while on the read_wait queue). This will cause tty_release() to endlessly loop without sleeping. Use a killable sleep timeout which grows by 2n+1 jiffies over the interval [0, 120 secs.) and then jumps to forever (but still killable). NB: killable just allows for the task to be rewoken manually, not to be terminated. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Eric Sandeen authored
commit 5ef828c4 upstream. The commit 83e782e1 xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD added a new function xfs_sb_quota_from_disk() which swaps on-disk XFS_OQUOTA_* flags for in-core XFS_GQUOTA_* and XFS_PQUOTA_* flags after the superblock is read. However, if log recovery is required, the superblock is read again, and the modified in-core flags are re-read from disk, so we have XFS_OQUOTA_* flags in memory again. This causes the XFS_QM_NEED_QUOTACHECK() test to be true, because the XFS_OQUOTA_CHKD is still set, and not XFS_GQUOTA_CHKD or XFS_PQUOTA_CHKD. Change xfs_sb_from_disk to call xfs_sb_quota_from disk and always convert the disk flags to in-memory flags. Add a lower-level function which can be called with "false" to not convert the flags, so that the sb verifier can verify exactly what was on disk, per Brian Foster's suggestion. Reported-by:
Cyril B. <cbay@excellency.fr> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Cc: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by:
-
Jan Kara authored
commit 474d2605 upstream. Due to a switched left and right side of an assignment, dquot_writeback_dquots() never returned error. This could result in errors during quota writeback to not be reported to userspace properly. Fix it. Coverity-id: 1226884 Signed-off-by:
-
Greg Kroah-Hartman authored
commit d8e7d53a upstream. Back in commit 5136b2da ("PCI: convert bus code to use dev_groups"), I misstyped the 'enable' sysfs filename as 'enabled', which broke the userspace API. This patch fixes that issue by renaming the file back. Fixes: 5136b2da ("PCI: convert bus code to use dev_groups") Reported-by:
Jeff Epler <jepler@unpythonic.net> Tested-by: Jeff Epler <jepler@unpythonic.net> # on v3.14-rt Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com>
-
Jan Kara authored
commit 7938db44 upstream. The check whether quota format is set even though there are no quota files with journalled quota is pointless and it actually makes it impossible to turn off journalled quotas (as there's no way to unset journalled quota format). Just remove the check. Signed-off-by:
-
Emmanuel Grumbach authored
commit 1ffde699 upstream. This reverts commit aa11bbf3. This commit was causing connection issues and is not needed if IWL_MVM_RS_RSSI_BASED_INIT_RATE is set to false by default. Regardless of the issues mentioned above, this patch added the following WARNING: WARNING: CPU: 0 PID: 3946 at drivers/net/wireless/iwlwifi/mvm/tx.c:190 iwl_mvm_set_tx_params+0x60a/0x6f0 [iwlmvm]() Got an HT rate for a non data frame 0x8 CPU: 0 PID: 3946 Comm: wpa_supplicant Tainted: G O 3.17.0+ #6 Hardware name: LENOVO 20ANCTO1WW/20ANCTO1WW, BIOS GLET71WW (2.25 ) 07/02/2014 0000000000000009 ffffffff814fa911 ffff8804288db8f8 ffffffff81064f52 0000000000001808 ffff8804288db948 ffff88040add8660 ffff8804291b5600 0000000000000000 ffffffff81064fb7 ffffffffa07b73d0 0000000000000020 Call Trace: [<ffffffff814fa911>] ? dump_stack+0x41/0x51 [<ffffffff81064f52>] ? warn_slowpath_common+0x72/0x90 [<ffffffff81064fb7>] ? warn_slowpath_fmt+0x47/0x50 [<ffffffffa07a39ea>] ? iwl_mvm_set_tx_params+0x60a/0x6f0 [iwlmvm] [<ffffffffa07a3cf8>] ? iwl_mvm_tx_skb+0x48/0x3c0 [iwlmvm] [<ffffffffa079cb9b>] ? iwl_mvm_mac_tx+0x7b/0x180 [iwlmvm] [<ffffffffa0746ce9>] ? __ieee80211_tx+0x2b9/0x3c0 [mac80211] [<ffffffffa07492f3>] ? ieee80211_tx+0xb3/0x100 [mac80211] [<ffffffffa0749c49>] ? ieee80211_subif_start_xmit+0x459/0xca0 [mac80211] [<ffffffff814116e7>] ? dev_hard_start_xmit+0x337/0x5f0 [<ffffffff81430d46>] ? sch_direct_xmit+0x96/0x1f0 [<ffffffff81411ba3>] ? __dev_queue_xmit+0x203/0x4f0 [<ffffffff8142f670>] ? ether_setup+0x70/0x70 [<ffffffff814e96a1>] ? packet_sendmsg+0xf81/0x1110 [<ffffffff8140625c>] ? skb_free_datagram+0xc/0x40 [<ffffffff813f7538>] ? sock_sendmsg+0x88/0xc0 [<ffffffff813f7274>] ? move_addr_to_kernel.part.20+0x14/0x60 [<ffffffff811c47c2>] ? __inode_wait_for_writeback+0x62/0xb0 [<ffffffff813f7a91>] ? SYSC_sendto+0xf1/0x180 [<ffffffff813f88f9>] ? __sys_recvmsg+0x39/0x70 [<ffffffff8150066d>] ? system_call_fastpath+0x1a/0x1f ---[ end trace cc19a150d311fc63 ]--- which was reported here: https://bugzilla.kernel.org/show_bug.cgi?id=85691Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
J. Bruce Fields authored
commit 51904b08 upstream. Unknown operation numbers are caught in nfsd4_decode_compound() which sets op->opnum to OP_ILLEGAL and op->status to nfserr_op_illegal. The error causes the main loop in nfsd4_proc_compound() to skip most processing. But nfsd4_proc_compound also peeks ahead at the next operation in one case and doesn't take similar precautions there. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Jason Baron authored
commit fa19ac4b upstream. Fix UE event being reported as HW_EVENT_ERR_CORRECTED. Signed-off-by:
Jason Baron <jbaron@akamai.com> Link: http://lkml.kernel.org/r/8beb13803500076fef827eab33d523e355d83759.1413405053.git.jbaron@akamai.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Jason Baron authored
commit 8030122a upstream. Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by:
-
Jason Baron authored
commit 8a3f075d upstream. Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by:
-
Jason Baron authored
commit ab0543de upstream. Fix CE event being reported as HW_EVENT_ERR_UNCORRECTED. Signed-off-by:
-
Jan Kara authored
commit 84ce0f0e upstream. When sg_scsi_ioctl() fails to prepare request to submit in blk_rq_map_kern() we jump to a label where we just end up copying (luckily zeroed-out) kernel buffer to userspace instead of reporting error. Fix the problem by jumping to the right label. CC: Jens Axboe <axboe@kernel.dk> CC: linux-scsi@vger.kernel.org Coverity-id: 1226871 Signed-off-by:
Jens Axboe <axboe@fb.com>
-
