At present, the functions freezer_count() and freezer_do_not_count()
impose the restriction that they are effective only for userspace processes.
However, now, these functions have found more utility than originally
intended by the commit which introduced it: ba96a0c8 (freezer:
fix vfork problem). And moreover, even the vfork issue actually does not
need the above restriction in these functions.

So, modify these functions to make them work even for kernel threads, so
that they can be used at other places in the kernel, where the userspace
restriction doesn't apply.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Allow the freezer to skip wait_on_bit_killable sleeps in the sunrpc
layer. This should allow suspend and hibernate events to proceed, even
when there are RPC's pending on the wire.

Also, wrap the TASK_KILLABLE sleeps in NFS layer in freezer_do_not_count
and freezer_count calls. This allows the freezer to skip tasks that are
sleeping while looping on EJUKEBOX or NFS4ERR_DELAY sorts of errors.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

Commit 944e192db53c "freezer: rename thaw_process() to __thaw_task()
and simplify the implementation" did not create a !CONFIG_FREEZER version
of __thaw_task().
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

* 'pm-freezer' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc: (24 commits)
  freezer: fix wait_event_freezable/__thaw_task races
  freezer: kill unused set_freezable_with_signal()
  dmatest: don't use set_freezable_with_signal()
  usb_storage: don't use set_freezable_with_signal()
  freezer: remove unused @sig_only from freeze_task()
  freezer: use lock_task_sighand() in fake_signal_wake_up()
  freezer: restructure __refrigerator()
  freezer: fix set_freezable[_with_signal]() race
  freezer: remove should_send_signal() and update frozen()
  freezer: remove now unused TIF_FREEZE
  freezer: make freezing() test freeze conditions in effect instead of TIF_FREEZE
  cgroup_freezer: prepare for removal of TIF_FREEZE
  freezer: clean up freeze_processes() failure path
  freezer: kill PF_FREEZING
  freezer: test freezable conditions while holding freezer_lock
  freezer: make freezing indicate freeze condition in effect
  freezer: use dedicated lock instead of task_lock() + memory barrier
  freezer: don't distinguish nosig tasks on thaw
  freezer: remove racy clear_freeze_flag() and set PF_NOFREEZE on dead tasks
  freezer: rename thaw_process() to __thaw_task() and simplify the implementation
  ...

The hibernation core code forgets to release memory preallocated
for hibernation if there's an error in its early stages or if test
modes causing hibernation_snapshot() to return early are used.  This
causes the system to be hardly usable, because the amount of
preallocated memory is usually huge.  Fix this problem.
Reported-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Check parent options for iterated tests

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Make i2cdev_notifier_call static
  i2c: Delete ANY_I2C_BUS
  i2c: Fix device name for 10-bit slave address
  i2c-algo-bit: Generate correct i2c address sequence for 10-bit target

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: TPS65910: Fix VDD1/2 voltage selector count

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
  drm: integer overflow in drm_mode_dirtyfb_ioctl()
  drivers/gpu/vga/vgaarb.c: add missing kfree
  drm/radeon/kms/atom: unify i2c gpio table handling
  drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real
  ttm: Don't return the bo reserved on error path
  drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS
  drm/i915: Fix inconsistent backlight level during disabled
  drm, i915: Fix memory leak in i915_gem_busy_ioctl().
  drm/i915: Use DPCD value for max DP lanes.
  drm/i915: Initiate DP link training only on the lanes we'll be using
  drm/i915: Remove trailing white space
  drm/i915: Try harder during dp pattern 1 link training
  drm/i915: Make DP prepare/commit consistent with DP dpms
  drm/i915: Let panel power sequencing hardware do its job
  drm/i915: Treat PCH eDP like DP in most places
  drm/i915: Remove link_status field from intel_dp structure
  drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control
  drm/i915: Module parameters using '-1' as default must be signed type
  drm/i915: Turn on another required clock gating bit on gen6.
  drm/i915: Turn on a required 3D clock gating bit on Sandybridge.
  ...

wait_event_freezable() and friends stop the waiting if try_to_freeze()
fails. This is not right, we can race with __thaw_task() and in this
case

	- wait_event_freezable() returns the wrong ERESTARTSYS

	- wait_event_freezable_timeout() can return the positive
	  value while condition == F

Change the code to always check __retval/condition before return.

Note: with or without this patch the timeout logic looks strange,
probably we should recalc timeout if try_to_freeze() returns T.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>

There's no in-kernel user of set_freezable_with_signal() left.  Mixing
TIF_SIGPENDING with kernel threads can lead to nasty corner cases as
kernel threads never travel signal delivery path on their own.

e.g. the current implementation is buggy in the cancelation path of
__thaw_task().  It calls recalc_sigpending_and_wake() in an attempt to
clear TIF_SIGPENDING but the function never clears it regardless of
sigpending state.  This means that signallable freezable kthreads may
continue executing with !freezing() && stuck TIF_SIGPENDING, which can
be troublesome.

This patch removes set_freezable_with_signal() along with
PF_FREEZER_NOSIG and recalc_sigpending*() calls in freezer.  User
tasks get TIF_SIGPENDING, kernel tasks get woken up and the spurious
sigpending is dealt with in the usual signal delivery path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>

Commit 981ed70d (dmatest: make dmatest threads freezable) made
dmatest kthread use set_freezable_with_signal(); however, the
interface is scheduled to be removed in the next merge window.

The problem is that unlike userland tasks there's no default place
which handles signal pending state and it isn't clear who owns and/or
is responsible for clearing TIF_SIGPENDING.  For example, in the
current code, try_to_freeze() clears TIF_SIGPENDING but it isn't sure
whether it actually owns the TIF_SIGPENDING nor is it race-free -
ie. the task may continue to run with TIF_SIGPENDING set after the
freezable section.

Unfortunately, we don't have wait_for_completion_freezable_timeout().
This patch open codes it and uses wait_event_freezable_timeout()
instead and removes timeout reloading - wait_event_freezable_timeout()
won't return across freezing events (currently racy but fix scheduled)
and timer doesn't decrement while the task is in freezer.  Although
this does lose timer-reset-over-freezing, given that timeout is
supposed to be long enough and failure to finish inside is considered
irrecoverable, I don't think this is worth the complexity.

While at it, move completion to outer scope and explain that we're
ignoring dangling pointer problem after timeout.  This should give
slightly better chance at avoiding oops after timeout.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>

Count of selector voltage is required for regulator_set_voltage
to work via set_voltage_sel. VDD1/2 currently have it as zero,
so regulator_set_voltage won't work for VDD1/2.
Update count (n_voltages) for VDD1/2.

Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain

With above expr, number of voltages that can be selected is
step value count * gain count

constant for gain count will be called VDD1_2_NUM_VOLT_COARSE

existing constant for step value count is VDD1_2_NUM_VOLTS,
use VDD1_2_NUM_VOLT_FINE instead to make clear that step value
is not the only component in deciding selectable voltage count
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

The function i2cdev_notifier_call is used only in i2c-dev file
making it static.
Also removes the following sparse warning

drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call'
was not declared. Should it be static?
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Last piece of code using ANY_I2C_BUS was deleted almost 2 years ago,
so ANY_I2C_BUS can go away as well.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

10-bit addresses overlap with traditional 7-bit addresses, leading in
device name collisions. Add an arbitrary offset to 10-bit addresses to
prevent this collision. The offset was chosen so that the address is
still easily recognizable.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>

The wrong bits were put on the wire, fix that.

This fixes kernel bug #42562.
Signed-off-by: Sheng-Hui J. Chu <jeffchu@broadcom.com>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>

There is a potential integer overflow in drm_mode_dirtyfb_ioctl()
if userspace passes in a large num_clips.  The call to kmalloc would
allocate a small buffer, and the call to fb->funcs->dirty may result
in a memory corruption.
Reported-by: Haogang Chen <haogangchen@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit dc937280.

As requested by Ben Herrenschmidt:
  "This breaks some powerpc platforms at least.  The practice of having
   a node provide an explicit "interrupt-parent" property pointing to
   itself is an old trick that we've used in the past to allow a
   device-node to have interrupts routed to different controllers.

   In that case, the node also contains an interrupt-map, so the node is
   its own parent, the interrupt resolution hits the map, which then can
   route each individual interrupt to a different parent."

Grant says:
  "Ah, nuts, yes that is broken then.  Yes, please revert the commit and
   Rob & I will come up with a better solution.

   Rob, I think it can be done by explicitly checking for np ==
   desc->interrupt_parent in of_irq_init() instead of relying on
   of_irq_find_parent() returning NULL."
Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: devicetree-discuss@lists.ozlabs.org
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  mount_subtree() pointless use-after-free
  iio: fix a leak due to improper use of anon_inode_getfd()
  microblaze: bury asm/namei.h

kbuf is a buffer that is local to this function, so all of the error paths
leaving the function should release it.
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Split the quirks and i2c_rec assignment into separate
functions used by both radeon_lookup_i2c_gpio() and
radeon_atombios_i2c_init().  This avoids duplicating code
and cases where quirks were only added to one of the
functions.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fixes i2c test failures when i2c_algo_bit.bit_test=1.

The hw doesn't actually require a mask, so just set it
to the default mask bits for r1xx-r4xx radeon ddc.

I missed this part the first time through.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

An unlikely race could case a bo to be returned reserved on an error path.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (25 commits)
  drm/i915: Fix inconsistent backlight level during disabled
  drm, i915: Fix memory leak in i915_gem_busy_ioctl().
  drm/i915: Use DPCD value for max DP lanes.
  drm/i915: Initiate DP link training only on the lanes we'll be using
  drm/i915: Remove trailing white space
  drm/i915: Try harder during dp pattern 1 link training
  drm/i915: Make DP prepare/commit consistent with DP dpms
  drm/i915: Let panel power sequencing hardware do its job
  drm/i915: Treat PCH eDP like DP in most places
  drm/i915: Remove link_status field from intel_dp structure
  drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control
  drm/i915: Module parameters using '-1' as default must be signed type
  drm/i915: Turn on another required clock gating bit on gen6.
  drm/i915: Turn on a required 3D clock gating bit on Sandybridge.
  drm/i915: enable cacheable objects on Ivybridge
  drm/i915: add constants to size fence arrays and fields
  drm/i915: Ivybridge still has fences!
  drm/i915: forcewake warning fixes in debugfs
  drm/i915: Fix object refcount leak on mmappable size limit error path.
  drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work
  ...

d'oh... we'd carefully pinned mnt->mnt_sb down, dropped mnt and attempt
to grab s_umount on mnt->mnt_sb.  The trouble is, *mnt might've been
overwritten by now...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ams_delta_serio - include linux/module.h
  Input: elantech - adjust hw_version detection logic
  Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix initialisation printout in s3c2410_wdt
  watchdog: Don't overwrite error value in wm831x_wdt_set_timeout()
  watchdog: adx_wdt.c: remove driver

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Revert pnfs ugliness from the generic NFS read code path
  SUNRPC: destroy freshly allocated transport in case of sockaddr init error
  NFS: Fix a regression in the referral code
  nfs: move nfs_file_operations declaration to bottom of file.c (try #2)
  nfs: when attempting to open a directory, fall back on normal lookup (try #5)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: remove free-space-cache.c WARN during log replay
  Btrfs: sectorsize align offsets in fiemap
  Btrfs: clear pages dirty for io and set them extent mapped
  Btrfs: wait on caching if we're loading the free space cache
  Btrfs: prefix resize related printks with btrfs:
  btrfs: fix stat blocks accounting
  Btrfs: avoid unnecessary bitmap search for cluster setup
  Btrfs: fix to search one more bitmap for cluster setup
  btrfs: mirror_num should be int, not u64
  btrfs: Fix up 32/64-bit compatibility for new ioctls
  Btrfs: fix barrier flushes
  Btrfs: fix tree corruption after multi-thread snapshots and inode_cache flush

* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: remove vm_dirties and task->dirties
  writeback: hard throttle 1000+ dd on a slow USB stick
  mm: Make task in balance_dirty_pages() killable

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fix more ET131X build errors
  staging: et131x depends on NET
  staging: slicoss depends on NET
  linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabled

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits)
  USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c
  USB: option: add PID of Huawei E173s 3G modem
  OHCI: final fix for NVIDIA problems (I hope)
  USB: option: release new PID for ZTE 3G modem
  usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c
  USB: storage: ene_ub6250: fix compile warnings
  USB: option: add id for 3G dongle Model VT1000 of Viettel
  USB: serial: pl2303: rm duplicate id
  USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH
  usb-storage: Accept 8020i-protocol commands longer than 12 bytes
  USB: quirks: adding more quirky webcams to avoid squeaky audio
  powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit
  USB: at91: at91-ohci: fix set/get power
  USB: cdc-acm: Fix disconnect() vs close() race
  USB: add quirk for Logitech C600 web cam
  USB: EHCI: fix HUB TT scheduling issue with iso transfer
  USB: XHCI: resume root hubs when the controller resumes
  USB: workaround for bug in old version of GCC
  USB: ark3116 initialisation fix
  ...

* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  TTY: ldisc, wait for ldisc infinitely in hangup
  TTY: ldisc, move wait idle to caller
  TTY: ldisc, allow waiting for ldisc arbitrarily long
  Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs"
  RS485: fix inconsistencies in the meaning of some variables
  pch_uart: Fix DMA resource leak issue
  serial,mfd: Fix CMSPAR setup
  tty/serial: Prevent drop of DCD on suspend for Tegra UARTs
  pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  pch_uart: Support new device LAPIS Semiconductor ML7831 IOH
  pch_uart: Fix hw-flow control issue
  tty: hvc_dcc: Fix duplicate character inputs
  jsm: Change maintainership

Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers/base/node.c: fix compilation error with older versions of gcc
  uio: documentation fixups
  device.h: Fix struct member documentation

* 'char-misc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: ad525x_dpot: Fix AD8400 spi transfer size.
  pch_phub: Fix MAC address writing issue for LAPIS ML7831
  pch_phub: Improve ADE(Address Decode Enable) control
  pch_phub: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  pch_phub: Support new device LAPIS Semiconductor ML7831 IOH
  pcie-gadget-spear: Add "platform:" prefix for platform modalias
  MAINTAINERS: add CHAR and MISC driver maintainers

it can fail and in that case ->release() will *not* be called...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

altroot support has been gone for years, along with arch/*/asm/namei.h;
looks like a dummy survivor that sat it out in microblaze tree...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The current implementation of set_freezable_with_signal() is buggy and
tricky to get right.  usb-storage is the only user and its use can be
avoided trivially.

All usb-storage wants is to be able to sleep with timeout and get
woken up if freezing() becomes true.  This can be trivially
implemented by doing interruptible wait w/ freezing() included in the
wait condition.  There's no reason to use set_freezable_with_signal().

Perform interruptible wait on freezing() instead of using
set_freezable_with_signal(), which is scheduled for removal.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@suse.de>

After "freezer: make freezing() test freeze conditions in effect
instead of TIF_FREEZE", freezing() returns authoritative answer on
whether the current task should freeze or not and freeze_task()
doesn't need or use @sig_only.  Remove it.

While at it, rewrite function comment for freeze_task() and rename
@sig_only to @user_only in try_to_freeze_tasks().

This patch doesn't cause any functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>