- 26 Nov, 2016 40 commits
-
-
Mark Bloch authored
commit 3c7ba576 upstream. sg_alloc_table gets unsigned int as parameter while the driver returns it as size_t. Check npages isn't greater than maximum unsigned int. Fixes: eeb8461e ("IB: Refactor umem to use linear SG table") Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eli Cohen authored
commit a1ab8402 upstream. For XRC QP CQs may not exist. Check before attempting dereference. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Eli Cohen <eli@mellanox.com> Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Eli Cohen authored
commit dbaaff2a upstream. When an internal error condition is detected, make sure to set the device inactive after dispatching the event so ULPs can get a notification of this event. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by:
-
Majd Dibbiny authored
commit 90be7c8a upstream. We need to free dev->port when we fail to enable RoCE or initialize node data. Fixes: 0837e86a ('IB/mlx5: Add per port counters') Signed-off-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Daniel Jurgens authored
commit 16b0e069 upstream. When creating kernel CQs use 128B CQE stride if the cache line size is 128B, 64B otherwise. This prevents multiple CQEs from residing in a 128B cache line, which can cause retries when there are concurrent read and writes in one cache line. Tested with IPoIB on PPC64, saw ~5% throughput improvement. Fixes: e126ba97 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
commit efd7f400 upstream. Validate that the requested size of RQT is supported by firmware. Fixes: c5f90929 ('IB/mlx5: Add Receive Work Queue Indirection table operations') Signed-off-by:
-
Matan Barak authored
commit 593ff73b upstream. Currently, if ib_copy_to_udata fails, the CQ won't be deleted from the radix tree and the HW (HW2SW). Fixes: 225c7b1f ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters') Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Daniel Jurgens authored
commit 37995116 upstream. Check the returned GID index value and return an error if it is invalid. Fixes: 5070cd22 ('IB/mlx4: Replace mechanism for RoCE GID management') Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
Yonatan Cohen authored
commit aa75b07b upstream. RXE resets the send-q only once in rxe_qp_init_req() when QP is created, but when the QP is reused after QP reset, the send-q holds previous garbage data. This garbage data wrongly fails CQEs that otherwise should have completed successfully. Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Yonatan Cohen authored
commit 002e062e upstream. To correctly handle a erroneous WR this fix does the following 1. Make sure the bad WQE causes a user completion event. 2. Call rxe_completer to handle the erred WQE. Before the fix, when rxe_requester found a bad WQE, it changed its status to IB_WC_LOC_PROT_ERR and exit with 0 for non RC QPs. If this was the 1st WQE then there would be no ACK to invoke the completer and this bad WQE would be stuck in the QP's send-q. On top of that the requester exiting with 0 caused rxe_do_task to endlessly invoke rxe_requester, resulting in a soft-lockup attached below. In case the WQE was not the 1st and rxe_completer did get a chance to handle the bad WQE, it did not cause a complete event since the WQE's IB_SEND_SIGNALED flag was not set. Setting WQE status to IB_SEND_SIGNALED is subject to IBA spec version 1.2.1, section 10.7.3.1 Signaled Completions. NMI watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [<ffffffffa0590145>] ? rxe_pool_get_index+0x35/0xb0 [rdma_rxe] [<ffffffffa05952ec>] lookup_mem+0x3c/0xc0 [rdma_rxe] [<ffffffffa0595534>] copy_data+0x1c4/0x230 [rdma_rxe] [<ffffffffa058c180>] rxe_requester+0x9d0/0x1100 [rdma_rxe] [<ffffffff8158e98a>] ? kfree_skbmem+0x5a/0x60 [<ffffffffa05962c9>] rxe_do_task+0x89/0xf0 [rdma_rxe] [<ffffffffa05963e2>] rxe_run_task+0x12/0x30 [rdma_rxe] [<ffffffffa059110a>] rxe_post_send+0x41a/0x550 [rdma_rxe] [<ffffffff811ef922>] ? __kmalloc+0x182/0x200 [<ffffffff816ba512>] ? down_read+0x12/0x40 [<ffffffffa054bd32>] ib_uverbs_post_send+0x532/0x540 [ib_uverbs] [<ffffffff815f8722>] ? tcp_sendmsg+0x402/0xb80 [<ffffffffa05453dc>] ib_uverbs_write+0x18c/0x3f0 [ib_uverbs] [<ffffffff81623c2e>] ? inet_recvmsg+0x7e/0xb0 [<ffffffff8158764d>] ? sock_recvmsg+0x3d/0x50 [<ffffffff81215b87>] __vfs_write+0x37/0x140 [<ffffffff81216892>] vfs_write+0xb2/0x1b0 [<ffffffff81217ce5>] SyS_write+0x55/0xc0 [<ffffffff816bc672>] entry_SYSCALL_64_fastpath+0x1a/0xa Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
-
Yonatan Cohen authored
commit 1454ca3a upstream. Missing initialization of udp_tunnel_sock_cfg causes to following kernel panic, while kernel tries to execute gro_receive(). While being there, we converted udp_port_cfg to use the same initialization scheme as udp_tunnel_sock_cfg. ------------[ cut here ]------------ kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle kernel paging request at ffffffffa0588c50 IP: [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe] PGD 1c09067 PUD 1c0a063 PMD bb394067 PTE 80000000ad5e8163 Oops: 0011 [#1] SMP Modules linked in: ib_rxe ip6_udp_tunnel udp_tunnel CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.7.0-rc3+ #2 Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 task: ffff880235e4e680 ti: ffff880235e68000 task.ti: ffff880235e68000 RIP: 0010:[<ffffffffa0588c50>] [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe] RSP: 0018:ffff880237343c80 EFLAGS: 00010282 RAX: 00000000dffe482d RBX: ffff8800ae330900 RCX: 000000002001b712 RDX: ffff8800ae330900 RSI: ffff8800ae102578 RDI: ffff880235589c00 RBP: ffff880237343cb0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ae33e262 R13: ffff880235589c00 R14: 0000000000000014 R15: ffff8800ae102578 FS: 0000000000000000(0000) GS:ffff880237340000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0588c50 CR3: 0000000001c06000 CR4: 00000000000006e0 Stack: ffffffff8160860e ffff8800ae330900 ffff8800ae102578 0000000000000014 000000000000004e ffff8800ae102578 ffff880237343ce0 ffffffff816088fb 0000000000000000 ffff8800ae330900 0000000000000000 00000000ffad0000 Call Trace: <IRQ> [<ffffffff8160860e>] ? udp_gro_receive+0xde/0x130 [<ffffffff816088fb>] udp4_gro_receive+0x10b/0x2d0 [<ffffffff81611373>] inet_gro_receive+0x1d3/0x270 [<ffffffff81594e29>] dev_gro_receive+0x269/0x3b0 [<ffffffff81595188>] napi_gro_receive+0x38/0x120 [<ffffffffa011caee>] mlx5e_handle_rx_cqe+0x27e/0x340 [mlx5_core] [<ffffffffa011d076>] mlx5e_poll_rx_cq+0x66/0x6d0 [mlx5_core] [<ffffffffa011d7ae>] mlx5e_napi_poll+0x8e/0x400 [mlx5_core] [<ffffffff815949a0>] net_rx_action+0x160/0x380 [<ffffffff816a9197>] __do_softirq+0xd7/0x2c5 [<ffffffff81085c35>] irq_exit+0xf5/0x100 [<ffffffff816a8f16>] do_IRQ+0x56/0xd0 [<ffffffff816a6dcc>] common_interrupt+0x8c/0x8c <EOI> [<ffffffff81061f96>] ? native_safe_halt+0x6/0x10 [<ffffffff81037ade>] default_idle+0x1e/0xd0 [<ffffffff8103828f>] arch_cpu_idle+0xf/0x20 [<ffffffff810c37dc>] default_idle_call+0x3c/0x50 [<ffffffff810c3b13>] cpu_startup_entry+0x323/0x3c0 [<ffffffff81050d8c>] start_secondary+0x15c/0x1a0 RIP [<ffffffffa0588c50>] __this_module+0x50/0xffffffffffff8400 [ib_rxe] RSP <ffff880237343c80> CR2: ffffffffa0588c50 ---[ end trace 489ee31fa7614ac5 ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception in interrupt ------------[ cut here ]------------ Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
-
Yonatan Cohen authored
commit 6d931308 upstream. The method rxe_qp_error() transitions QP to error state and make sure the QP is drained. It did not though update the QP state for user's query. This patch fixes this. Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
-
Namhyung Kim authored
commit c72ab446 upstream. Markus reported that there's a weird behavior on perf top --hierarchy regarding the column length. Looking at the code, I found a dubious code which affects the symptoms. When --hierarchy option is used, the last column length might be inaccurate since it skips to update the length on leaf entries. I cannot remember why it did and looks like a leftover from previous version during the development. Anyway, updating the column length often is not harmful. So let's move the code out. Reported-and-Tested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 1a3906a7 ("perf hists: Resort hist entries with hierarchy") Link: http://lkml.kernel.org/r/20161108130833.9263-5-namhyung@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Brian Norris authored
commit 6f75c3fd upstream. Consider two devices, A and B, where B is a child of A, and B utilizes asynchronous suspend (it does not matter whether A is sync or async). If B fails to suspend_noirq() or suspend_late(), or is interrupted by a wakeup (pm_wakeup_pending()), then it aborts and sets the async_error variable. However, device A does not (immediately) check the async_error variable; it may continue to run its own suspend_noirq()/suspend_late() callback. This is bad. We can resolve this problem by doing our error and wakeup checking (particularly, for the async_error flag) after waiting for children to suspend, instead of before. This also helps align the logic for the noirq and late suspend cases with the logic in __device_suspend(). It's easy to observe this erroneous behavior by, for example, forcing a device to sleep a bit in its suspend_noirq() (to ensure the parent is waiting for the child to complete), then return an error, and watch the parent suspend_noirq() still get called. (Or similarly, fake a wakeup event at the right (or is it wrong?) time.) Fixes: de377b39 (PM / sleep: Asynchronous threads for suspend_late) Fixes: 28b6fd6e (PM / sleep: Asynchronous threads for suspend_noirq) Reported-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Johan Hovold authored
commit ceb75787 upstream. Make sure to drop the reference taken by class_find_device() after opening the RTC device. Fixes: 77437fd4 (pm: boot time suspend selftest) Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit d6124b40 upstream. This subsystem consistently fails to drop the device reference taken by class_find_device(). Note that some of these lookup functions already take a reference to the returned data, while others claim no reference is needed (or does not seem need one). Fixes: 183b9b59 ("uwb: add the UWB stack (core files)") Signed-off-by:
-
Scott Mayhew authored
commit ea08e392 upstream. This fixes the following panic that can occur with NFSoRDMA. general protection fault: 0000 [#1] SMP Modules linked in: rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx5_ib ib_core intel_powerclamp coretemp kvm_intel kvm sg ioatdma ipmi_devintf ipmi_ssif dcdbas iTCO_wdt iTCO_vendor_support pcspkr irqbypass sb_edac shpchp dca crc32_pclmul ghash_clmulni_intel edac_core lpc_ich aesni_intel lrw gf128mul glue_helper ablk_helper mei_me mei ipmi_si cryptd wmi ipmi_msghandler acpi_pad acpi_power_meter nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt ahci fb_sys_fops ttm libahci mlx5_core tg3 crct10dif_pclmul drm crct10dif_common ptp i2c_core libata crc32c_intel pps_core fjes dm_mirror dm_region_hash dm_log dm_mod CPU: 1 PID: 120 Comm: kworker/1:1 Not tainted 3.10.0-514.el7.x86_64 #1 Hardware name: Dell Inc. PowerEdge R320/0KM5PX, BIOS 2.4.2 01/29/2015 Workqueue: events check_lifetime task: ffff88031f506dd0 ti: ffff88031f584000 task.ti: ffff88031f584000 RIP: 0010:[<ffffffff8168d847>] [<ffffffff8168d847>] _raw_spin_lock_bh+0x17/0x50 RSP: 0018:ffff88031f587ba8 EFLAGS: 00010206 RAX: 0000000000020000 RBX: 20041fac02080072 RCX: ffff88031f587fd8 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 20041fac02080072 RBP: ffff88031f587bb0 R08: 0000000000000008 R09: ffffffff8155be77 R10: ffff880322a59b00 R11: ffffea000bf39f00 R12: 20041fac02080072 R13: 000000000000000d R14: ffff8800c4fbd800 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff880322a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3c52d4547e CR3: 00000000019ba000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: 20041fac02080002 ffff88031f587bd0 ffffffff81557830 20041fac02080002 ffff88031f587c78 ffff88031f587c40 ffffffff8155ae08 000000010157df32 0000000800000001 ffff88031f587c20 ffffffff81096acb ffffffff81aa37d0 Call Trace: [<ffffffff81557830>] lock_sock_nested+0x20/0x50 [<ffffffff8155ae08>] sock_setsockopt+0x78/0x940 [<ffffffff81096acb>] ? lock_timer_base.isra.33+0x2b/0x50 [<ffffffff8155397d>] kernel_setsockopt+0x4d/0x50 [<ffffffffa0386284>] svc_age_temp_xprts_now+0x174/0x1e0 [sunrpc] [<ffffffffa03b681d>] nfsd_inetaddr_event+0x9d/0xd0 [nfsd] [<ffffffff81691ebc>] notifier_call_chain+0x4c/0x70 [<ffffffff810b687d>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810b68b6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff815e8538>] __inet_del_ifa+0x168/0x2d0 [<ffffffff815e8cef>] check_lifetime+0x25f/0x270 [<ffffffff810a7f3b>] process_one_work+0x17b/0x470 [<ffffffff810a8d76>] worker_thread+0x126/0x410 [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460 [<ffffffff810b052f>] kthread+0xcf/0xe0 [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 [<ffffffff81696418>] ret_from_fork+0x58/0x90 [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 Code: ca 75 f1 5d c3 0f 1f 80 00 00 00 00 eb d9 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 7e 04 a0 ff b8 00 00 02 00 <f0> 0f c1 03 89 c2 c1 ea 10 66 39 c2 75 03 5b 5d c3 83 e2 fe 0f RIP [<ffffffff8168d847>] _raw_spin_lock_bh+0x17/0x50 RSP <ffff88031f587ba8> Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Fixes: c3d4879e ("sunrpc: Add a function to close temporary transports immediately") Reviewed-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Johan Hovold authored
commit 722f1910 upstream. Make sure to drop the reference taken by bus_find_device_by_name() before returning from mfd_clone_cell(). Fixes: a9bbba99 ("mfd: add platform_device sharing support for mfd") Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Sara Sharon authored
commit 3a732c65 upstream. When we sync the RX queues the driver waits to receive echo notification on all the RX queues. The wait queue is set with timeout until all queues have received the notification. However, iwl_mvm_rx_queue_notif() never woke up the wait queue, with the result of the counter value being checked only when the timeout expired. This may cause a latency of up to 1 second. Fixes: 0636b938 ("iwlwifi: mvm: implement driver RX queues sync command") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Luca Coelho authored
commit 85cd69b8 upstream. When a unified D0/D3 image is used, we don't restart the FW in the D0->D3->D0 transitions. Therefore, the d3_test functionality should not call ieee8021_restart_hw() when the resuming either. Fixes: commit 23ae6128 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by:
-
Luca Coelho authored
commit 5a143db8 upstream. With unified images, we need to make sure the net-detect scan is stopped after resuming, since we don't restart the FW. Also, we need to make sure we check if there are enough scan slots available to run it, as we do with other scans. Fixes: commit 23ae6128 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by:
-
Johannes Berg authored
commit faead41c upstream. Emmanuel reports that when CMD_WANT_ASYNC_CALLBACK is used by mvm, the callback will be called with the command queue lock held, and mvm will try to stop all (other) TX queues, which acquires their locks - this caused a false lockdep recursive locking report. Suppress this report by marking the command queue lock with a new, separate, lock class so lockdep can tell the difference between the two types of queues. Fixes: 156f92f2 ("iwlwifi: block the queues when we send ADD_STA for uAPSD") Reported-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Luca Coelho authored
commit e0d9727c upstream. The SPLC data parsing is too restrictive and was not trying find the correct element for WiFi. This causes problems with some BIOSes where the SPLC method exists, but doesn't have a WiFi entry on the first element of the list. The domain type values are also incorrect according to the specification. Fix this by complying with the actual specification. Additionally, replace all occurrences of SPLX to SPLC, since SPLX is only a structure internal to the ACPI tables, and may not even exist. Fixes: bcb079a1 ("iwlwifi: pcie: retrieve and parse ACPI power limitations") Reported-by:
Chris Rorvick <chris@rorvick.com> Tested-by:
Paul Bolle <pebolle@tiscali.nl> Tested-by:
-
Lokesh Vutla authored
commit 3984903a upstream. RTC can be clocked from an external 32KHz oscillator, or from the Peripheral PLL. The RTC has an internal oscillator buffer to support direct operation with a crystal. ---------------------------------------- | Device --------- | | | | | | | RTCSS | | | --------- | | | OSC |<------| RTC | | | | |------>| OSC |--- | | | | -------- | | | | | ----|clk | | | -------- | | | | | | PRCM |--- | | | | -------- -------- | ---------------------------------------- The RTC functional clock is sourced by default from the clock derived from the Peripheral PLL. In order to select source as external osc clk the following changes needs to be done: - Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0) - Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1) - Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1) Fixes: 399cf0f6 ("rtc: omap: Add external clock enabling support") Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Emil Lundmark authored
commit 5c2f117a upstream. Since 'parent_rate * mfn' may overflow 32 bits, the result should be stored using 64 bits. The problem was discovered when trying to set the rate of the audio PLL (pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but the actual rate returned was 192.000570 MHz. The round rate function should have been able to return 196.608 MHz, i.e., the desired rate. Fixes: ba7f4f55 ("clk: imx: correct AV PLL rate formula") Cc: Anson Huang <b20788@freescale.com> Signed-off-by:
Emil Lundmark <emil@limesaudio.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Wei Yongjun authored
commit a29e52a6 upstream. Fix the retrn value check which testing the wrong variable in mmp2_clk_init(). Fixes: 1ec770d9 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Yongjun authored
commit deab0726 upstream. Fix the retrn value check which testing the wrong variable in pxa168_clk_init(). Fixes: ab08aefc ("clk: mmp: add pxa168 DT support for clock driver") Signed-off-by:
-
Wei Yongjun authored
commit 10f2bfb0 upstream. Fix the retrn value check which testing the wrong variable in pxa910_clk_init(). Fixes: 2bc61da9 ("clk: mmp: add pxa910 DT support for clock driver") Signed-off-by:
-
Michael S. Tsirkin authored
commit f3358507 upstream. Virtio 1.0 spec says VIRTIO_F_ANY_LAYOUT and VIRTIO_NET_F_GSO are legacy-only feature bits. Do not negotiate them in virtio 1 mode. Note this is a spec violation so we need to backport it to stable/downstream kernels. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ville Syrjälä authored
commit bc9db5ad upstream. My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT port information apparently didn't survive the reality of buggy VBTs. In this particular case we have a machine with a natice HDMI port, but the VBT tells us it's a DP++ port based on its capabilities. The dvo_port information in VBT does claim that we're dealing with a HDMI port though, but we have other machines which do the same even when they actually have DP++ ports. So that piece of information alone isn't sufficient to tell the two apart. After staring at a bunch of VBTs from various machines, I have to conclude that the only other semi-reliable clue we can use is the presence of the AUX channel in the VBT. On this particular machine AUX channel is specified as zero, whereas on some of the other machines which listed the DP++ port as HDMI have a non-zero AUX channel. I've also seen VBTs which have dvo_port a DP but have a zero AUX channel. I believe those we need to treat as DP ports, so we'll limit the AUX channel check to just the cases where dvo_port is HDMI. If we encounter any more serious failures with this heuristic I think we'll have to have to throw it out entirely. But that could mean that there is a risk of type 1 DVI dongle users getting greeted by a black screen, so I'd rather not go there unless absolutely necessary. v2: Remove the duplicate PORT_A check (Daniel) Fix some typos in the commit message Cc: Daniel Otero <daniel.otero@outlook.com> Tested-by:
Daniel Otero <daniel.otero@outlook.com> Fixes: d6199256 ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit 7a17995a) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit fc22b787 upstream. Once we've determined that the sink is MST capable we never end up running through the full detect cycle again, despite getting HPDs. Fix tht by ripping out the incorrect piece of code responsible. This got broken when I moved the long HPD handling to the ->detect() hook, but failed to remove the leftover code. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: drm-intel-fixes@lists.freedesktop.org Cc: Rui Tiago Matos <tiagomatos@gmail.com> Tested-by:
Rui Tiago Matos <tiagomatos@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323 Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> References: https://bugs.freedesktop.org/show_bug.cgi?id=98306 Fixes: 10158116 ("drm/i915: Move long hpd handling into the hotplug work") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit 1aab956c) Signed-off-by:
-
Mario Kleiner authored
commit 8e94a46c upstream. External clients which import our bo's wait only for exclusive dmabuf-fences, not on shared ones, ditto for bo's which we import from external providers and write to. Therefore attach exclusive fences on prime shared buffers if our exported buffer gets imported by an external client, or if we import a buffer from an external exporter. See discussion in thread: https://lists.freedesktop.org/archives/dri-devel/2016-October/122370.html Prime export tested on Intel iGPU + AMD Tonga dGPU as DRI3/Present Prime render offload, and with the Tonga standalone as primary gpu. v2: Add a wait for all shared fences before prime export, as suggested by Christian Koenig. v3: - Mark buffer prime_exported in amdgpu_gem_prime_pin, so we only use the exclusive fence when exporting a bo to external clients like a separate iGPU, but not when exporting/importing from/to ourselves as part of regular DRI3 fd passing. - Propagate failure of reservation_object_wait_rcu back to caller. v4: - Switch to a prime_shared_count counter instead of a flag, which gets in/decremented on prime_pin/unpin, so we can switch back to shared fences if all clients detach from our exported bo. - Also switch to exclusive fence for prime imported bo's. v5: - Drop lret, instead use int ret -> long ret, as proposed by Christian. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95472 Tested-by: Mike Lothian <mike@fireburn.co.uk> (v1) Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Cc: Christian König <christian.koenig@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit c0a36013 upstream. Commit d3cbff1b "powerpc: Put exception configuration in a common place" broke the setting of the AIL bit (which enables taking exceptions with the MMU still on) on all processors, moving it incorrectly to a function called only on the boot CPU. This was correct for the guest case but not when running in hypervisor mode. This fixes it by partially reverting that commit, putting the setting back in cpu_ready_for_interrupts() Fixes: d3cbff1b ("powerpc: Put exception configuration in a common place") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Sven Ebenfeld authored
commit 83d2c9a9 upstream. When using AES-XTS on a Wandboard, we receive a Mode error: caam_jr 2102000.jr1: 20001311: CCB: desc idx 19: AES: Mode error. According to the Security Reference Manual, the Low Power AES units of the i.MX6 do not support the XTS mode. Therefore we must not register XTS implementations in the Crypto API. Signed-off-by:
Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Fabio Estevam authored
commit e3c9d9d6 upstream. Since commit fa93fd4e ("regulator: core: Ensure we are at least in bounds for our constraints") the imx53-qsb board populated with a Dialog DA9053 PMIC fails to boot: LDO3: Bringing 3300000uV into 1800000-1800000uV The LDO3 voltage constraints passed in the device tree do not match the valid range according to the datasheet, so fix this accordingly to allow the board booting again. While at it, fix the other voltage constraints as well. Signed-off-by:
-
Theodore Ts'o authored
commit 8cdf3372 upstream. If the block size or cluster size is insane, reject the mount. This is important for security reasons (although we shouldn't be just depending on this check). Ref: http://www.securityfocus.com/archive/1/539661 Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506Reported-by:
Borislav Petkov <bp@alien8.de> Reported-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Borislav Petkov authored
commit c6a38553 upstream. So Sebastian turned off the PIE for kernel builds but that was too late - Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc options with, say cc-disable-warning, fails: gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs ... -Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp /dev/null:1:0: error: code model kernel does not support PIC mode because that returns an error and we can't disable the warning. For example in this case: KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) which leads to gcc issuing all those warnings again. So let's turn off PIE/PIC at the earliest possible moment, when we declare KBUILD_CFLAGS so that cc-disable-warning picks it up too. Also, we need the $(call cc-option ...) because -fno-PIE is supported since gcc v3.4 and our lowest supported gcc version is 3.2 right now. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 90944e40 upstream. If the gcc is configured to do -fPIE by default then the build aborts later with: | Unsupported relocation type: unknown type rel type name (29) Tagging it stable so it is possible to compile recent stable kernels as well. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 82031ea2 upstream. Adding -no-PIE to the fstack protector check. -no-PIE was introduced before -fstack-protector so there is no need for a runtime check. Without it the build stops: |Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong available but compiler is broken due to -mcmodel=kernel + -fPIE if -fPIE is enabled by default. Tagging it stable so it is possible to compile recent stable kernels as well. Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 8ae94224 upstream. Debian started to build the gcc with -fPIE by default so the kernel build ends before it starts properly with: |kernel/bounds.c:1:0: error: code model kernel does not support PIC mode Also add to KBUILD_AFLAGS due to: |gcc -Wp,-MD,arch/x86/entry/vdso/vdso32/.note.o.d … -mfentry -DCC_USING_FENTRY … vdso/vdso32/note.S |arch/x86/entry/vdso/vdso32/note.S:1:0: sorry, unimplemented: -mfentry isn’t supported for 32-bit in combination with -fpic Tagging it stable so it is possible to compile recent stable kernels as well. Signed-off-by:
-
