1. 21 Apr, 2004 9 commits
    • Andrew Morton's avatar
      [PATCH] lockfs - xfs bits · 46f76939
      Andrew Morton authored
      From: Christoph Hellwig <hch@lst.de>
      
      Remove all the code now in the VFS, make XFS's freeze ioctls use the new
      infastructure and reorganize some code.
      
      This code needs some work so the source files shared with 2.4 aren't
      exposed to the new VFS interfaces directly.  You'll get an update once this
      has been discussed with the other XFS developers and is implemented.  Note
      that the current patch works fine and I wouldn't complain if it gets into
      Linus' tree as-is.
      46f76939
    • Andrew Morton's avatar
      [PATCH] lockfs: reiserfs fix · 472336a4
      Andrew Morton authored
      From: Chris Mason <mason@suse.com>
      
      reiserfs_write_super_lockfs() is supposed to wait for the transaction to
      commit.
      472336a4
    • Andrew Morton's avatar
      [PATCH] lockfs - vfs bits · 137718ec
      Andrew Morton authored
      From: Christoph Hellwig <hch@lst.de>
      
      These are the generic lockfs bits.  Basically it takes the XFS freezing
      statemachine into the VFS.  It's all behind the kernel-doc documented
      freeze_bdev and thaw_bdev interfaces.
      
      Based on an older patch from Chris Mason.
      137718ec
    • Andrew Morton's avatar
      [PATCH] remove amd7xx_tco · 4aa3ba95
      Andrew Morton authored
      From: Zwane Mwaikambo <zwane@linuxpower.ca>
      
      We've had trouble with this driver, it appears to work but the hardware
      never does the final reboot.  I have yet to come across someone with a
      board which works and don't have personal access to one.  So how about
      scrapping the whole thing.
      4aa3ba95
    • Andrew Morton's avatar
      [PATCH] Call populate_rootfs later in boot · d8d03c0f
      Andrew Morton authored
      populate_rootfs() is called rather early - before we've called init_idle().
      
      But populate_rootfs() does file I/O, which involves calls to cond_resched(),
      and downing of semaphores, etc.  If it scheules, the scheduler emits
      scheduling-while-atomic warnings and sometimes oopses.
      
      So run populate_rootfs() later, after the scheduler is all set up.
      d8d03c0f
    • Andrew Morton's avatar
      [PATCH] ext3 avoid writing kernel memory to disk · c13b1e72
      Andrew Morton authored
      From: Marc-Christian Petersen <m.c.p@kernel.linux-systeme.com>
      
      Solar Designer discovered an information leak in the ext3 code of Linux.
      In a worst case an attacker could read sensitive data such as cryptographic
      keys which would otherwise never hit disk media.  Theodore Ts'o developed a
      correction for this.
      c13b1e72
    • Andrew Morton's avatar
      [PATCH] compute_creds race · b7fbe52c
      Andrew Morton authored
      From: Andy Lutomirski <luto@myrealbox.com>
      
      Fixes from me, Olaf Dietsche <olaf+list.linux-kernel@olafdietsche.de>
      
      In fs/exec.c, compute_creds does:
      
      	task_lock(current);
      	if (bprm->e_uid != current->uid || bprm->e_gid != current->gid) {
                       current->mm->dumpable = 0;
      
      		if (must_not_trace_exec(current)
      		    || atomic_read(&current->fs->count) > 1
      		    || atomic_read(&current->files->count) > 1
      		    || atomic_read(&current->sighand->count) > 1) {
      			if(!capable(CAP_SETUID)) {
      				bprm->e_uid = current->uid;
      				bprm->e_gid = current->gid;
      			}
      		}
      	}
      
               current->suid = current->euid = current->fsuid = bprm->e_uid;
               current->sgid = current->egid = current->fsgid = bprm->e_gid;
      
      	task_unlock(current);
      
      	security_bprm_compute_creds(bprm);
      
      I assume the task_lock is to prevent another process (on SMP or preempt)
      from ptracing the execing process between the check and the assignment.  If
      that's the concern then the fact that the lock is dropped before the call
      to security_brpm_compute_creds means that, if security_bprm_compute_creds
      does anything interesting, there's a race.
      
      For my (nearly complete) caps patch, I obviously need to fix this.  But I
      think it may be exploitable now.  Suppose there are two processes, A (the
      malicious code) and B (which uses exec).  B starts out unprivileged (A and
      B have, e.g., uid and euid = 500).
      
      1. A ptraces B.
      
      2. B calls exec on some setuid-root program.
      
      3. in cap_bprm_set_security, B sets bprm->cap_permitted to the full
         set.
      
      4. B gets to compute_creds in exec.c, calls task_lock, and does not
         change its uid.
      
      5. B calls task_unlock.
      
      6. A detaches from B (on preempt or SMP).
      
      7. B gets to task_lock in cap_bprm_compute_creds, changes its
         capabilities, and returns from compute_creds into load_elf_binary.
      
      8. load_elf_binary calls create_elf_tables (line 852 in 2.6.5-mm1),
         which calls cap_bprm_secureexec (through LSM), which returns false (!).
      
      9. exec finishes.
      
      The setuid program is now running with uid=euid=500 but full permitted
      capabilities.  There are two (or three) ways to effectively get local root
      now:
      
      1.  IIRC, linux 2.4 doesn't check capabilities in ptrace, so A could
         just ptrace B again.
      
      2. LD_PRELOAD.
      
      3.  There are probably programs that will misbehave on their own under
         these circumstances.
      
      Is there some reason why this is not doable?
      
      The patch renames bprm_compute_creds to bprm_apply_creds and moves all uid
      logic into the hook, where the test and the resulting modification can both
      happen under task_lock().
      
      This way, out-of-tree LSMs will fail to compile instead of malfunctioning. 
      It should also make life easier for LSMs and will certainly make it easier
      for me to finish the cap patch.
      b7fbe52c
    • Andrew Morton's avatar
      [PATCH] Fix nfsroot option handling · ce0cbde1
      Andrew Morton authored
      From: Trond Myklebust <trond.myklebust@fys.uio.no>
      
      The following patch fixes up a number of bugs in the NFSroot parser
      rewrite from patchset
      trond.myklebust@fys.uio.no|ChangeSet|20040411182341|00938
      
      It also ensures that NFSroot mount options are consistent with the userland
      "mount" program.
      ce0cbde1
    • Ulrich Drepper's avatar
      [PATCH] Add missing __initdata · e7086e68
      Ulrich Drepper authored
      One of the stack size optimizations introduced a new static variable in
      a function marked with __init.  But the variable is not marked
      appropriately and so 1k of data is never freed.
      e7086e68
  2. 20 Apr, 2004 13 commits
    • Linus Torvalds's avatar
      Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk · 171e0205
      Linus Torvalds authored
      into ppc970.osdl.org:/home/torvalds/v2.6/linux
      171e0205
    • Russell King's avatar
      [ARM] Add find_first_bit and find_next_bit. · 7a928ead
      Russell King authored
      7a928ead
    • Linus Torvalds's avatar
      Linux 2.6.6-rc2 · 347f6162
      Linus Torvalds authored
      347f6162
    • Jens Axboe's avatar
      [PATCH] Fix CFQ elevator problem · 28f95425
      Jens Axboe authored
      Remove bogus assert in CFQ and remove merge hints.
      28f95425
    • Andrew Morton's avatar
      [PATCH] MIPS update · 70e2d422
      Andrew Morton authored
      From: Ralf Baechle <ralf@linux-mips.org>
      
      - more work on resurrecting AMD Alchemy platforms
      - cleanup of unnecessary <asm/pgalloc.h> inclusions
      - update default config files
      - cleanup 32-bit compat ioctl code
      - support for Montum Jaguar ATX
      - workarounds for early revs of the RM9000
      - fixes for RM5000 and RM7000 cache handling
      - add support for PMC-Sierra Yosemite eval board
      - further cleanup and bugfixes for SGI IP27
      - make LASAT and VR41xx build and work in 2.6
      - improved SGI IP32 support
      - plenty of small fixes
      70e2d422
    • Andrew Morton's avatar
      [PATCH] MIPS: update documentation files · fb4e0779
      Andrew Morton authored
      From: Ralf Baechle <ralf@linux-mips.org>
      
      The pending changes to the MIPS doc files, more changes needed...
      fb4e0779
    • Andrew Morton's avatar
      [PATCH] MIPS: don't offer SERIAL_DZ on 64-bit DEC · c93def0b
      Andrew Morton authored
      From: Ralf Baechle <ralf@linux-mips.org>
      
      Limit the DZ driver to MIPS32 as the supported hardware is only present in
      R2k/R3k-based systems (unless someone sends Maciej a PMAC-A board for driver
      development).
      c93def0b
    • Andrew Morton's avatar
      [PATCH] remove duplicated COPYING file in fs/hfs/ · d4047c3f
      Andrew Morton authored
      From: Christoph Hellwig <hch@lst.de>
      
      We don't need a copy of COPYING down in fs/hfs.  Roman said he didn't mind,
      so..
      d4047c3f
    • Andrew Morton's avatar
      [PATCH] hlist_add_after() fix · 83de2fa5
      Andrew Morton authored
      From: "Pedro Emanuel M. D. Pinto" <pepinto@student.dei.uc.pt>
      
      This currently-unused function is incorrectly implemented.  Fix.
      83de2fa5
    • Andrew Morton's avatar
      [PATCH] pcnet32.c build fix · 717a2c9c
      Andrew Morton authored
      Remove a duplicated case which recently snuck in there.
      717a2c9c
    • Andrew Morton's avatar
      [PATCH] fix madvise(MADV_DONTNEED) for nonlinear vmas · d614d315
      Andrew Morton authored
      From: Hugh Dickins <hugh@veritas.com>
      
      Jamie points out that madvise(MADV_DONTNEED) should unmap pages from a
      nonlinear area in such a way that the nonlinear offsets are preserved if the
      pages do turn out to be needed later after all, instead of reverting them to
      linearity: needs to pass down a zap_details block.
      
      (But this still leaves mincore unaware of nonlinear vmas: bigger job.)
      d614d315
    • Andrew Morton's avatar
      [PATCH] reiserfs use-after-free fix · e8b338d6
      Andrew Morton authored
      From: Chris Mason <mason@suse.com>
      
      reiserfs-delayed-work started using queue_delayed_work, but did not make sure
      the timer was finished before it freed the work queue structs during unmount. 
      This leads to timer oopsen if you unmount at just the right time.
      e8b338d6
    • Roland McGrath's avatar
      [PATCH] fix for potential deadlock after posix-timers change · f3276a18
      Roland McGrath authored
      Ulrich has been working on the glibc code using posix-timers and
      stressing it more now than it has before.  He ran into an SMP deadlock
      on process exit in the case there are pending queued signals from a
      timer.
      
      The deadlock arises because in the path through exit_itimers, the
      tasklist_lock is already held (for writing).  When a timer is being
      deleted, sigqueue_free will try to take it (for reading) in the case
      where that timer has a pending signal queued on somebody's queue.  This
      patch avoids the problem by making sure the queues are flushed before
      calling exit_itimers, thus ensuring its code path won't try to take
      tasklist_lock.
      f3276a18
  3. 19 Apr, 2004 18 commits
    • Benjamin Herrenschmidt's avatar
      [PATCH] ppc64: siginfo conversion fix · b4389817
      Benjamin Herrenschmidt authored
      My message queue patch fixes the 64 bits -> 32 bits conversion of
      siginfo, but didn't change the 32 -> 64 bits conversion done in
      sys32_rt_sigqueueinfo() which was apparently bogus as well.
      
      After much discussion & debate on the right way of converting that
      structure, I decided to go the sparc64 / s390 way, and not the x86_64
      way, that is to copy the various unions data "as is". This guarantees
      that whatever a 32 bist app passes there, another 32 bits app will
      understand it. Crossover between 32 and 64 bits apps on such things
      as home-made userland siginfo isn't something we can help with anyway.
      
      The x86_64 choice of converting as if it was an RT signal, thus
      converting the sigval, cannot easily be applied to big endian archs
      since the sigval is a union of a ptr and an int, on BE, the int
      happens to be on the wrong half of the 64 bits ptr, thus  we can't
      do a simple conversion.
      b4389817
    • Bartlomiej Zolnierkiewicz's avatar
      [PATCH] generic ide_init_hwif_ports() · 38fc4e8b
      Bartlomiej Zolnierkiewicz authored
      Add generic ide_init_hwif_ports() to <linux/ide.h> and remove arch specific
      versions except arm26, arm, h8300, i386-pc9800, m68k and m68knommu ones.
      38fc4e8b
    • Bartlomiej Zolnierkiewicz's avatar
      [PATCH] ide_init_default_hwifs() -> ide_init_default_irq() · c407acc1
      Bartlomiej Zolnierkiewicz authored
      init_ide_data() initializes default IDE interfaces but without default IRQ
      (hwif->irq and hwif->hw.irq fields) so introduce ide_init_default_irq() and
      remove redundant ide_init_default_hwifs() (except arm26 and arm ones).
      
      As a side-effect it fixes:
      - CONFIG_BLK_DEV_HD_IDE if !CONFIG_BLK_DEV_IDEPCI (i386)
      - hwif->noprobe shouldn't be 0 if !hwif->io_ports[IDE_DATA_OFFSET]
        (alpha, i386, ia64, mips, sh, x86_64)
      c407acc1
    • Bartlomiej Zolnierkiewicz's avatar
    • Linus Torvalds's avatar
    • Linus Torvalds's avatar
      b35a6769
    • Linus Torvalds's avatar
      Merge master.kernel.org:/home/davem/BK/net-2.6 · dfb9c436
      Linus Torvalds authored
      into ppc970.osdl.org:/home/torvalds/v2.6/linux
      dfb9c436
    • Linus Torvalds's avatar
      Merge bk://gkernel.bkbits.net/misc-2.6 · 299b664a
      Linus Torvalds authored
      into ppc970.osdl.org:/home/torvalds/v2.6/linux
      299b664a
    • Bjorn Helgaas's avatar
      [PATCH] Fix hw_random build on ia64 · 36377f61
      Bjorn Helgaas authored
      The following patch allows hw_random.c to build on ia64.  (The problem
      was just that the VIA stuff has i386 assembly in it.  The current code
      only probes for VIA on i386 anyway, so this patch just adds more ifdefs
      so the VIA code is only built for i386.)
      36377f61
    • Linus Torvalds's avatar
      Merge bk://gkernel.bkbits.net/net-drivers-2.6 · 1e6ad211
      Linus Torvalds authored
      into ppc970.osdl.org:/home/torvalds/v2.6/linux
      1e6ad211
    • Pavel Roskin's avatar
      [PATCH] Tulip endianess fix · d86d6aaa
      Pavel Roskin authored
      My tulip ethernet card doesn't work on Blue&White G3 PowerMac with Linux
      2.6.5-rc2.  The card is shown by lspci as
      
      01:03.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet
      10/100 model NC100 (rev 11)
      
      The kernel detects it as "ADMtek Comet rev 17".
      
      The MAC address reported by the kernel looked obviously wrong.  Also, I
      could only ping the system successfully if the interface was in promiscuous
      mode (running Ethereal).
      
      Those two symptoms indicated two different problems - one for reading the
      MAC address from the card on module load (tulip_init_one), and the other
      for writing the address to the card when the interface was brought up
      (tulip_up).  I have fixed both, and here's the explanation:
      
      tulip_init_one:
      
      When reading the first 4 bytes of the address, inl() returns the same data
      to the CPU on all platforms, interpreting the data from the lowest port
      address as the least significant byte.  In other words, I/O is little
      endian on all platforms; it's the memory that differs across platforms.
      We want to write the data to memory preserving little-endianness of the
      PCI bus.  To force little endian write to the memory, the data should be
      converted to the little endian format.
      
      When reading the remaining 2 bytes, the CPU gets them in 2 least
      significant bytes.  To write those 2 bytes to the memory in a 16-bit
      operation, they should be byte-swapped for the 16-bit operation.
      
      tulip_up:
      
      The first 4 bytes are processed correctly, but the code is confusing.
      Reading from memory needs conversion to CPU format, while writing to I/O
      ports doesn't.  So I replaced cpu_to_le32() to le32_to_cpu().
      
      The second 2 bytes are read in a 16-bit memory operation, so they should
      be passed to le16_to_cpu() rather than cpu_to_le32() to make them CPU
      independent and suitable for outl().
      
      
      All those conversions do nothing on little-endian machines, so they should
      not be affected.
      
      The patch has been tested.  The driver is working fine.  ping is OK, ssh
      is OK, X11 over ssh is OK.  Even netconsole is working fine.
      d86d6aaa
    • Daniel Ritz's avatar
      [PATCH] missing s/dev->priv/netdev_priv(dev) in drivers/net/pcmcia/ · 0d61de3f
      Daniel Ritz authored
      On Wednesday 24 March 2004 23:25, Jeff Garzik wrote:
      > Daniel Ritz wrote:
      > > clean up the last two instances of dev->priv in drivers/net/pcmcia.
      > > against 2.6.5-rc2-bk.
      > >
      > > --- 1.27/drivers/net/pcmcia/3c589_cs.c	Wed Mar  3 01:03:51 2004
      > > +++ edited/drivers/net/pcmcia/3c589_cs.c	Wed Mar 24 22:29:35 2004
      > > @@ -716,7 +716,7 @@
      > >  	  "status %4.4x.\n", dev->name, (long)skb->len,
      > >  	  inw(ioaddr + EL3_STATUS));
      > >
      > > -    ((struct el3_private *)dev->priv)->stats.tx_bytes += skb->len;
      > > +    ((struct el3_private *)netdev_priv(dev))->stats.tx_bytes += skb->len;
      > >
      > >      /* Put out the doubleword header... */
      > >      outw(skb->len, ioaddr + TX_FIFO);
      > > --- 1.24/drivers/net/pcmcia/ibmtr_cs.c	Wed Mar  3 01:06:03 2004
      > > +++ edited/drivers/net/pcmcia/ibmtr_cs.c	Wed Mar 24 22:29:51 2004
      > > @@ -444,7 +444,7 @@
      > >          link->state &= ~DEV_PRESENT;
      > >          if (link->state & DEV_CONFIG) {
      > >  	    /* set flag to bypass normal interrupt code */
      > > -	    ((struct tok_info *)dev->priv)->sram_virt |= 1;
      > > +	    ((struct tok_info *)netdev_priv(dev))->sram_virt |= 1;
      > >  	    netif_device_detach(dev);
      > >  	    ibmtr_release(link);
      >
      >
      > although the patch is OK, the code itself is a bit yucky.
      >
      > Can you please create a temporary variable, of struct el3_private or
      > tok_info type, and eliminate that cast?
      >
      > struct el3_private *priv = netdev_priv(dev);
      > priv->stats.tx_bytes += skb->len;
      >
      > Much nicer :)
      >
      
      agreed. here we go...
      0d61de3f
    • Andrew Morton's avatar
      [PATCH] Call SET_NETDEV_DEV() in a bunch of net drivers · 513f042e
      Andrew Morton authored
      Used for sysfs support.
      513f042e
    • Don Fry's avatar
      [PATCH] pcnet32.c add support for 79C976 · ece91eb2
      Don Fry authored
      Please apply the following patch to 2.6.5-rc2-bk9 and 2.4.26-rc1 to
      include support for the 79C976. Tested on IA32.
      ece91eb2
    • Stephen Hemminger's avatar
      [PATCH] remove 8139too ring size option. · 4e21d3f5
      Stephen Hemminger authored
      On Wed, 31 Mar 2004 15:05:16 -0500
      Jeff Garzik <jgarzik@pobox.com> wrote:
      
      > I really should remove the ability to configure 8139_RXBUF_IDX=3.
      4e21d3f5
    • Javier Achirica's avatar
      [PATCH] airo: Fix suspend support · d54bf49a
      Javier Achirica authored
      d54bf49a
    • Russell King's avatar
      [PATCH] fix arm/etherh.c · eb659532
      Russell King authored
      On Tue, Apr 13, 2004 at 02:35:40PM -0400, Jeff Garzik wrote:
      > Russell,
      >
      > Would you be willing to provide an updated diff of this?
      
      I didn't particularly like the PRIV() method implemented previously -
      gcc appears to want to avoid some optimisations it if its an inline
      function rather than a macro.
      
      Also, 'ei_local' may look unused in some functions, but it's your
      typical hidden-use-in-a-macro crap which 8390 likes.
      eb659532
    • Stephen Hemminger's avatar
      [PATCH] Mixed PCI/ISA device name conflicts · 66dbee35
      Stephen Hemminger authored
      In systems with mixed network cards, and all drivers compiled into
      the kernel; the PCI device (eth0) will get probed first, before the ISA.
      
      The problem is that the ISA device can mistakenly try to probe
      for eth0.  The problem is that the ISA driver will not detect the failure
      until it goes to call register_netdevice, and not all drivers have
      perfect error unwind code.
      
      This patch short circuits the device probe, so it won't bother
      looking for devices that already are registered.
      66dbee35