- 19 Mar, 2018 40 commits
-
-
Marc Zyngier authored
Although the idmap section of KVM can only be at most 4kB and must be aligned on a 4kB boundary, the rest of the code expects it to be page aligned. Things get messy when tearing down the HYP page tables when PAGE_SIZE is 64K, and the idmap section isn't 64K aligned. Let's fix this by computing aligned boundaries that the HYP code will use. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
James Morse <james.morse@arm.com> Reviewed-by:
James Morse <james.morse@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
As we're about to change the way we map devices at HYP, we need to move away from kern_hyp_va on an IO address. One way of achieving this is to store the VAs in kvm_vgic_global_state, and use that directly from the HYP code. This requires a small change to create_hyp_io_mappings so that it can also return a HYP VA. We take this opportunity to nuke the vctrl_base field in the emulated distributor, as it is not used anymore. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
Both HYP io mappings call ioremap, followed by create_hyp_io_mappings. Let's move the ioremap call into create_hyp_io_mappings itself, which simplifies the code a bit and allows for further refactoring. Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
Displaying the HYP VA information is slightly counterproductive when using VA randomization. Turn it into a debug feature only, and adjust the last displayed value to reflect the top of RAM instead of ~0. Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
kvm_vgic_global_state is part of the read-only section, and is usually accessed using a PC-relative address generation (adrp + add). It is thus useless to use kern_hyp_va() on it, and actively problematic if kern_hyp_va() becomes non-idempotent. On the other hand, there is no way that the compiler is going to guarantee that such access is always PC relative. So let's bite the bullet and provide our own accessor. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
James Morse <james.morse@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
Now that we can dynamically compute the kernek/hyp VA mask, there is no need for a feature flag to trigger the alternative patching. Let's drop the flag and everything that depends on it. Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
So far, we're using a complicated sequence of alternatives to patch the kernel/hyp VA mask on non-VHE, and NOP out the masking altogether when on VHE. The newly introduced dynamic patching gives us the opportunity to simplify that code by patching a single instruction with the correct mask (instead of the mind bending cumulative masking we have at the moment) or even a single NOP on VHE. This also adds some initial code that will allow the patching callback to switch to a more complex patching. Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
James Morse <james.morse@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
We lack a way to encode operations such as AND, ORR, EOR that take an immediate value. Doing so is quite involved, and is all about reverse engineering the decoding algorithm described in the pseudocode function DecodeBitMasks(). This has been tested by feeding it all the possible literal values and comparing the output with that of GAS. Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
We're missing the a way to generate the encoding of the N immediate, which is only a single bit used in a number of instruction that take an immediate. Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
We've so far relied on a patching infrastructure that only gave us a single alternative, without any way to provide a range of potential replacement instructions. For a single feature, this is an all or nothing thing. It would be interesting to have a more flexible grained way of patching the kernel though, where we could dynamically tune the code that gets injected. In order to achive this, let's introduce a new form of dynamic patching, assiciating a callback to a patching site. This callback gets source and target locations of the patching request, as well as the number of instructions to be patched. Dynamic patching is declared with the new ALTERNATIVE_CB and alternative_cb directives: asm volatile(ALTERNATIVE_CB("mov %0, #0\n", callback) : "r" (v)); or alternative_cb callback mov x0, #0 alternative_cb_end where callback is the C function computing the alternative. Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
We can finally get completely rid of any calls to the VGICv3 save/restore functions when the AP lists are empty on VHE systems. This requires carefully factoring out trap configuration from saving and restoring state, and carefully choosing what to do on the VHE and non-VHE path. One of the challenges is that we cannot save/restore the VMCR lazily because we can only write the VMCR when ICC_SRE_EL1.SRE is cleared when emulating a GICv2-on-GICv3, since otherwise all Group-0 interrupts end up being delivered as FIQ. To solve this problem, and still provide fast performance in the fast path of exiting a VM when no interrupts are pending (which also optimized the latency for actually delivering virtual interrupts coming from physical interrupts), we orchestrate a dance of only doing the activate/deactivate traps in vgic load/put for VHE systems (which can have ICC_SRE_EL1.SRE cleared when running in the host), and doing the configuration on every round-trip on non-VHE systems. Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
The APRs can only have bits set when the guest acknowledges an interrupt in the LR and can only have a bit cleared when the guest EOIs an interrupt in the LR. Therefore, if we have no LRs with any pending/active interrupts, the APR cannot change value and there is no need to clear it on every exit from the VM (hint: it will have already been cleared when we exited the guest the last time with the LRs all EOIed). The only case we need to take care of is when we migrate the VCPU away from a CPU or migrate a new VCPU onto a CPU, or when we return to userspace to capture the state of the VCPU for migration. To make sure this works, factor out the APR save/restore functionality into separate functions called from the VCPU (and by extension VGIC) put/load hooks. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
Just like we can program the GICv2 hypervisor control interface directly from the core vgic code, we can do the same for the GICv3 hypervisor control interface on VHE systems. We do this by simply calling the save/restore functions when we have VHE and we can then get rid of the save/restore function calls from the VHE world switch function. One caveat is that we now write GICv3 system register state before the potential early exit path in the run loop, and because we sync back state in the early exit path, we have to ensure that we read a consistent GIC state from the sync path, even though we have never actually run the guest with the newly written GIC state. We solve this by inserting an ISB in the early exit path. Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
The vgic-v2-sr.c file now only contains the logic to replay unaligned accesses to the virtual CPU interface on 16K and 64K page systems, which is only relevant on 64-bit platforms. Therefore move this file to the arm64 KVM tree, remove the compile directive from the 32-bit side makefile, and remove the ifdef in the C file. Since this file also no longer saves/restores anything, rename the file to vgic-v2-cpuif-proxy.c to more accurately describe the logic in this file. Reviewed-by:
Andre Przywara <andre.przywara@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
We can program the GICv2 hypervisor control interface logic directly from the core vgic code and can instead do the save/restore directly from the flush/sync functions, which can lead to a number of future optimizations. Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
There is really no need to store the vgic_elrsr on the VGIC data structures as the only need we have for the elrsr is to figure out if an LR is inactive when we save the VGIC state upon returning from the guest. We can might as well store this in a temporary local variable. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
To make the code more readable and to avoid the overhead of a function call, let's get rid of a pair of the alternative function selectors and explicitly call the VHE and non-VHE functions using the has_vhe() static key based selector instead, telling the compiler to try to inline the static function if it can. Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
We do not have to change the c15 trap setting on each switch to/from the guest on VHE systems, because this setting only affects guest EL1/EL0 (and therefore not the VHE host). The PMU and debug trap configuration can also be done on vcpu load/put instead, because they don't affect how the VHE host kernel can access the debug registers while executing KVM kernel code. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
There is no longer a need for an alternative to choose the right function to tell us whether or not FPSIMD was enabled for the VM, because we can simply can the appropriate functions directly from within the _vhe and _nvhe run functions. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
As we are about to be more lazy with some of the trap configuration register read/writes for VHE systems, move the logic that is currently shared between VHE and non-VHE into a separate function which can be called from either the world-switch path or from vcpu_load/vcpu_put. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
When running a 32-bit VM (EL1 in AArch32), the AArch32 system registers can be deferred to vcpu load/put on VHE systems because neither the host kernel nor host userspace uses these registers. Note that we can't save DBGVCR32_EL2 conditionally based on the state of the debug dirty flag on VHE after this change, because during vcpu_load() we haven't calculated a valid debug flag yet, and when we've restored the register during vcpu_load() we also have to save it during vcpu_put(). This means that we'll always restore/save the register for VHE on load/put, but luckily vcpu load/put are called rarely, so saving an extra register unconditionally shouldn't significantly hurt performance. We can also not defer saving FPEXC32_32 because this register only holds a guest-valid value for 32-bit guests during the exit path when the guest has used FPSIMD registers and restored the register in the early assembly handler from taking the EL2 fault, and therefore we have to check if fpsimd is enabled for the guest in the exit path and save the register then, for both VHE and non-VHE guests. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
32-bit registers are not used by a 64-bit host kernel and can be deferred, but we need to rework the accesses to these register to access the latest values depending on whether or not guest system registers are loaded on the CPU or only reside in memory. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
Some system registers do not affect the host kernel's execution and can therefore be loaded when we are about to run a VCPU and we don't have to restore the host state to the hardware before the time when we are actually about to return to userspace or schedule out the VCPU thread. The EL1 system registers and the userspace state registers only affecting EL0 execution do not need to be saved and restored on every switch between the VM and the host, because they don't affect the host kernel's execution. We mark all registers which are now deffered as such in the vcpu_{read,write}_sys_reg accessors in sys-regs.c to ensure the most up-to-date copy is always accessed. Note MPIDR_EL1 (controlled via VMPIDR_EL2) is accessed from other vcpu threads, for example via the GIC emulation, and therefore must be declared as immediate, which is fine as the guest cannot modify this value. The 32-bit sysregs can also be deferred but we do this in a separate patch as it requires a bit more infrastructure. Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
ELR_EL1 is not used by a VHE host kernel and can be deferred, but we need to rework the accesses to this register to access the latest value depending on whether or not guest system registers are loaded on the CPU or only reside in memory. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
SPSR_EL1 is not used by a VHE host kernel and can be deferred, but we need to rework the accesses to this register to access the latest value depending on whether or not guest system registers are loaded on the CPU or only reside in memory. The handling of accessing the various banked SPSRs for 32-bit VMs is a bit clunky, but this will be improved in following patches which will first prepare and subsequently implement deferred save/restore of the 32-bit registers, including the 32-bit SPSRs. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
We are about to defer saving and restoring some groups of system registers to vcpu_put and vcpu_load on supported systems. This means that we need some infrastructure to access system registes which supports either accessing the memory backing of the register or directly accessing the system registers, depending on the state of the system when we access the register. We do this by defining read/write accessor functions, which can handle both "immediate" and "deferrable" system registers. Immediate registers are always saved/restored in the world-switch path, but deferrable registers are only saved/restored in vcpu_put/vcpu_load when supported and sysregs_loaded_on_cpu will be set in that case. Note that we don't use the deferred mechanism yet in this patch, but only introduce infrastructure. This is to improve convenience of review in the subsequent patches where it is clear which registers become deferred. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
Currently we access the system registers array via the vcpu_sys_reg() macro. However, we are about to change the behavior to some times modify the register file directly, so let's change this to two primitives: * Accessor macros vcpu_write_sys_reg() and vcpu_read_sys_reg() * Direct array access macro __vcpu_sys_reg() The accessor macros should be used in places where the code needs to access the currently loaded VCPU's state as observed by the guest. For example, when trapping on cache related registers, a write to a system register should go directly to the VCPU version of the register. The direct array access macro can be used in places where the VCPU is known to never be running (for example userspace access) or for registers which are never context switched (for example all the PMU system registers). This rewrites all users of vcpu_sys_regs to one of the macros described above. No functional change. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
We currently handle 32-bit accesses to trapped VM system registers using the 32-bit index into the coproc array on the vcpu structure, which is a union of the coproc array and the sysreg array. Since all the 32-bit coproc indices are created to correspond to the architectural mapping between 64-bit system registers and 32-bit coprocessor registers, and because the AArch64 system registers are the double in size of the AArch32 coprocessor registers, we can always find the system register entry that we must update by dividing the 32-bit coproc index by 2. This is going to make our lives much easier when we have to start accessing system registers that use deferred save/restore and might have to be read directly from the physical CPU. Reviewed-by:
Andrew Jones <drjones@redhat.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
On non-VHE systems we need to save the ELR_EL2 and SPSR_EL2 so that we can return to the host in EL1 in the same state and location where we issued a hypercall to EL2, but on VHE ELR_EL2 and SPSR_EL2 are not useful because we never enter a guest as a result of an exception entry that would be directly handled by KVM. The kernel entry code already saves ELR_EL1/SPSR_EL1 on exception entry, which is enough. Therefore, factor out these registers into separate save/restore functions, making it easy to exclude them from the VHE world-switch path later on. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
There is no need to have multiple identical functions with different names for saving host and guest state. When saving and restoring state for the host and guest, the state is the same for both contexts, and that's why we have the kvm_cpu_context structure. Delete one version and rename the other into simply save/restore. Reviewed-by:
Andrew Jones <drjones@redhat.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
The comment only applied to SPE on non-VHE systems, so we simply remove it. Suggested-by:
Andrew Jones <drjones@redhat.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
As we are about to handle system registers quite differently between VHE and non-VHE systems. In preparation for that, we need to split some of the handling functions between VHE and non-VHE functionality. For now, we simply copy the non-VHE functions, but we do change the use of static keys for VHE and non-VHE functionality now that we have separate functions. Reviewed-by:
Andrew Jones <drjones@redhat.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
As we are about to move calls around in the sysreg save/restore logic, let's first rewrite the alternative function callers, because it is going to make the next patches much easier to read. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
There's a semantic difference between the EL1 registers that control operation of a kernel running in EL1 and EL1 registers that only control userspace execution in EL0. Since we can defer saving/restoring the latter, move them into their own function. The ARMv8 ARM (ARM DDI 0487C.a) Section D10.2.1 recommends that ACTLR_EL1 has no effect on the processor when running the VHE host, and we can therefore move this register into the EL1 state which is only saved/restored on vcpu_put/load for a VHE host. We also take this chance to rename the function saving/restoring the remaining system register to make it clear this function deals with the EL1 system registers. Reviewed-by:
Andrew Jones <drjones@redhat.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
The VHE switch function calls __timer_enable_traps and __timer_disable_traps which don't do anything on VHE systems. Therefore, simply remove these calls from the VHE switch function and make the functions non-conditional as they are now only called from the non-VHE switch path. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
There is no need to reset the VTTBR to zero when exiting the guest on VHE systems. VHE systems don't use stage 2 translations for the EL2&0 translation regime used by the host. Reviewed-by:
Andrew Jones <drjones@redhat.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
VHE kernels run completely in EL2 and therefore don't have a notion of kernel and hyp addresses, they are all just kernel addresses. Therefore don't call kern_hyp_va() in the VHE switch function. Reviewed-by:
Andrew Jones <drjones@redhat.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
So far this is mostly (see below) a copy of the legacy non-VHE switch function, but we will start reworking these functions in separate directions to work on VHE and non-VHE in the most optimal way in later patches. The only difference after this patch between the VHE and non-VHE run functions is that we omit the branch-predictor variant-2 hardening for QC Falkor CPUs, because this workaround is specific to a series of non-VHE ARMv8.0 CPUs. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
The current world-switch function has functionality to detect a number of cases where we need to fixup some part of the exit condition and possibly run the guest again, before having restored the host state. This includes populating missing fault info, emulating GICv2 CPU interface accesses when mapped at unaligned addresses, and emulating the GICv3 CPU interface on systems that need it. As we are about to have an alternative switch function for VHE systems, but VHE systems still need the same early fixup logic, factor out this logic into a separate function that can be shared by both switch functions. No functional change. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-
Christoffer Dall authored
Instead of having multiple calls from the world switch path to the debug logic, each figuring out if the dirty bit is set and if we should save/restore the debug registers, let's just provide two hooks to the debug save/restore functionality, one for switching to the guest context, and one for switching to the host context, and we get the benefit of only having to evaluate the dirty flag once on each path, plus we give the compiler some more room to inline some of this functionality. Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com>
-