- 11 Jul, 2012 40 commits
-
-
Li RongQing authored
mld->mld_maxdelay is net endian, so we should use ntohs, not htons CC: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
commit 6d29b1ef introduces a bug, ntohs is __be16_to_cpu, not cpu_to_be16. We always use htons on IP_OFFSET and IP_MF, then compare with network package. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
ETH_P_IP is host Endian, skb->protocol is big Endian, when compare them, Using htons on skb->protocol is wrong. And fix two code style issues: indentation and remove unnecessary parentheses. CC: Tristram Ha <Tristram.Ha@micrel.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Joe Perches <joe@perches.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: net/batman-adv/bridge_loop_avoidance.c net/batman-adv/bridge_loop_avoidance.h net/batman-adv/soft-interface.c net/mac80211/mlme.c With merge help from Antonio Quartulli (batman-adv) and Stephen Rothwell (drivers/net/usb/qmi_wwan.c). The net/mac80211/mlme.c conflict seemed easy enough, accounting for a conversion to some new tracing macros. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
In rare cases, bnx2x_free_tx_skbs() can unmap the wrong DMA address when it gets to the last entry of the tx ring. We were not using the proper macro to skip the last entry when advancing the tx index. Reported-by: Zongyun Lai <zlai@vmware.com> Reviewed-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Or Gerlitz reported triggering of WARN_ON_ONCE(delta < len); in skb_try_coalesce() This warning tracks drivers that incorrectly set skb->truesize IPoIB indeed allocates a full page to store a fragment, but only accounts in skb->truesize the used part of the page (frame length) This patch fixes skb truesize underestimation, and also fixes a performance issue, because RX skbs have not enough tailroom to allow IP and TCP stacks to pull their header in skb linear part without an expensive call to pskb_expand_head() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Shlomo Pongartz <shlomop@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Hanania authored
In driver reload test there is a memory leak. The structure vlan_info was not freed when the driver was removed. It was not released since the nr_vids var is one after last vlan was removed. The nr_vids is one, since vlan zero is added to the interface when the interface is being set, but the vlan zero is not deleted at unregister. Fix - delete vlan zero when we unregister the device. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - fix a bug generated by the wrong interaction between the GW feature and the Bridge Loop Avoidance
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Missing case was causing ethtool self test to print garbage value in extra info section. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
TX queue was being stopped at beginning of send path instead of at the end when last descriptor is used. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Enabling RX cut-thru mode yields better performance as received frames start getting written to memory before a whole frame is received. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Increase the number of outstanding read and write AXI transactions from 1 to 8 for better performance. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Fix intermittent hangs in xgmac_rx_refill. If a ring buffer entry already had an skb allocated, then xgmac_rx_refill would get stuck in a loop. This can happen on a rx error when we just leave the skb allocated to the entry. [ 7884.510000] INFO: rcu_preempt detected stall on CPU 0 (t=727315 jiffies) [ 7884.510000] [<c0010a59>] (unwind_backtrace+0x1/0x98) from [<c006fd93>] (__rcu_pending+0x11b/0x2c4) [ 7884.510000] [<c006fd93>] (__rcu_pending+0x11b/0x2c4) from [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) [ 7884.510000] [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) from [<c0036abb>] (update_process_times+0x2b/0x48) [ 7884.510000] [<c0036abb>] (update_process_times+0x2b/0x48) from [<c004e8fd>] (tick_sched_timer+0x51/0x94) [ 7884.510000] [<c004e8fd>] (tick_sched_timer+0x51/0x94) from [<c0045527>] (__run_hrtimer+0x4f/0x1e8) [ 7884.510000] [<c0045527>] (__run_hrtimer+0x4f/0x1e8) from [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) [ 7884.510000] [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) from [<c00101d3>] (twd_handler+0x17/0x24) [ 7884.510000] [<c00101d3>] (twd_handler+0x17/0x24) from [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) [ 7884.510000] [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) from [<c0069aab>] (generic_handle_irq+0x17/0x2c) [ 7884.510000] [<c0069aab>] (generic_handle_irq+0x17/0x2c) from [<c000cc8d>] (handle_IRQ+0x35/0x7c) [ 7884.510000] [<c000cc8d>] (handle_IRQ+0x35/0x7c) from [<c033b153>] (__irq_svc+0x33/0xb8) [ 7884.510000] [<c033b153>] (__irq_svc+0x33/0xb8) from [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) [ 7884.510000] [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) from [<c02458ed>] (xgmac_poll+0x265/0x3bc) [ 7884.510000] [<c02458ed>] (xgmac_poll+0x265/0x3bc) from [<c029fcbf>] (net_rx_action+0xc3/0x200) [ 7884.510000] [<c029fcbf>] (net_rx_action+0xc3/0x200) from [<c0030cab>] (__do_softirq+0xa3/0x1bc) Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rob Herring authored
Fix net tx watchdog timeout recovery. The descriptor ring was reset, but the DMA engine was not reset to the beginning of the ring. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set by the driver's skb alloc routine (which is called in init and during rx). It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set during ring init and skb alloc in rx. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set before calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set during ring init. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set before calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set after calling eth_type_trans. eth_type_trans already sets skb->dev to the proper value, thus making this unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Christian Benvenuti <benve@cisco.com> Cc: Roopa Prabhu <roprabhu@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
skb->dev is being unnecessarily set during ring init. It is already being set to the proper value when eth_type_trans is called on packet receive, and the skb->dev is not referenced anywhere else in the code. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
URLs to neterion.com and s2io.com no longer resolve. Remove all references to these URLs in the driver source and documentation. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
On 64 bit arches having efficient unaligned accesses (eg x86_64) we can use long words to reduce number of instructions for free. Joe Perches suggested to change ipv6_masked_addr_cmp() to return a bool instead of 'int', to make sure ipv6_masked_addr_cmp() cannot be used in a sorting function. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Convert doxygen (or similar) formatted comments to kernel-doc or unformatted comment. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ben Hutchings authored
Defining a function with no parameters as 'T foo()' is the deprecated K&R style, and is not strictly equivalent to defining it as 'T foo(void)'. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-