- 21 Oct, 2010 31 commits
-
-
Julia Lawall authored
In cx23885/cx23885-video.c, cx88/cx88-video.c, davinci/vpif_capture.c, and davinci/vpif_display.c, group the aligned code into a single if branch. In saa7134/saa7134-video.c, outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
"sd" and "err" are too common names to be used in macros for local variables. Prefix them with an underscore to avoid name clashing. [mchehab@redhat.com: whitespace cleanups] Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by:
Andy Walls <awalls@md.metrocast.net> Signed-off-by:
-
Jarod Wilson authored
This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/gspca/konica.c: In function ‘sd_start’: drivers/media/video/gspca/konica.c:322: error: implicit declaration of function ‘usb_buffer_alloc’ drivers/media/video/gspca/konica.c:325: warning: assignment makes pointer from integer without a cast make[3]: ** [drivers/media/video/gspca/konica.o] Erro 1 Signed-off-by: -
Hans de Goede authored
gspca_xirlink_cit: adjust ibm netcam pro framerate for available bandwidth Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
This new driver replaces the (known to not work / crash) usbvideo konicawc driver. Signed-off-by:
-
Hans de Goede authored
gspca_*: correct typo in my email address in various subdrivers Signed-off-by:
-
Hans de Goede authored
Mark usbvideo ibmcam driver as deprecated, it is replaced by the new gscpa xirlink_cit driver. Signed-off-by:
-
Hans de Goede authored
Some xirlink_cit models have only 1 alt setting, but the actual used bandwidth can be programmed through a register use this to allow streaming while other isoc streams (for example sound) are active at the same time. Signed-off-by:
-
Hans de Goede authored
gspca_xirlink_cit: Use alt setting -> fps formula for model 1 cams too Signed-off-by:
-
Hans de Goede authored
Add support for camera with a bcd version of 0.01, I've dupped these Model0 cams. Signed-off-by:
-
Hans de Goede authored
Note this is untested as I don't have hardware to test, but all initsequences were taken over 1 on 1 from the old ibmcam driver so things should work. Signed-off-by:
-
Hans de Goede authored
The old usbvideo ibmcam driver needs to be replaced with a v4l2 driver preferably using the gspca webcam framework rather then the old usbvideo framework. This new gspca sub driver sets a first step in that direction. The ibmcam driver supports 4 different model webcams. This new driver (for now) only supports Model 3 cameras, as my test cam is a Model 3 cam, or so I thought. Upon reading: http://www.linux-usb.org/ibmcam/ I learned that the IBM Netcamera Pro I have even though having the same usb id and the same bcd version is different from the Model 3 cameras supported by the ibmcam driver. So this new gscpa subdriver supports Model 3 cameras (untested), and the IBM Netcamera Pro. Currently use with the IBM Netcamera Pro requires a module parameter. I hope to be able to autodetect which is which in the future. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Hans Verkuil authored
These have now all been replaced by enum/try/s/g_mbus_fmt. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
These are needed for the ov7670 driver. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Needed for tvp7002 and tvp514x drivers. Signed-off-by:
-
- 20 Oct, 2010 5 commits
-
-
Linus Torvalds authored
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: O32 compat/N32: Fix to use compat syscall wrappers for AIO syscalls. MAINTAINERS: Change list for ioc_serial to linux-serial. SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failure MIPS: jz4740: Fix Kbuild Platform file. MIPS: Repair Kbuild make clean breakage.
-
Amit Shah authored
If the host is slow in reading data or doesn't read data at all, blocking write calls not only blocked the program that called write() but the entire guest itself. To overcome this, let's not block till the host signals it has given back the virtio ring element we passed it. Instead, send the buffer to the host and return to userspace. This operation then becomes similar to how non-blocking writes work, so let's use the existing code for this path as well. This code change also ensures blocking write calls do get blocked if there's not enough room in the virtio ring as well as they don't return -EAGAIN to userspace. Signed-off-by:
Amit Shah <amit.shah@redhat.com> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bsg: fix incorrect device_status value [SCSI] Fix VPD inquiry page wrapper
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Fix fs/gs reload oops with invalid ldt
-
- 19 Oct, 2010 4 commits
-
-
Michel Thebeau authored
[Ralf: Michel's original patch only fixed N32; I replicated the same fix for O32.] Signed-off-by:
Michel Thebeau <michel.thebeau@windriver.com> Cc: paul.gortmaker@windriver.com Cc: bruce.ashfield@windriver.com Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
IOC3 is also being used on SGI MIPS systems but this particular driver is only being used on IA64 systems so linux-mips made no sense as a list. Pat also thinks linux-serial@vger.kernel.org is the better list. Signed-off-by: -
Julia Lawall authored
In this code, 0 is returned on memory allocation failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by:
-
David Daney authored
The platform specific files should be included via the platform-y variable. Signed-off-by:
David Daney <ddaney@caviumnetworks.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Patchwork: https://patchwork.linux-mips.org/patch/1719/Signed-off-by:
-
