An error occurred fetching the project authors.
- 06 Nov, 2005 8 commits
-
-
Christoph Hellwig authored
now that the abuse in qla2xxx is gone this field can be remove. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Christoph Hellwig authored
adjust comments, remove a useless cast and remove a write-only variable. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Willem Riede authored
This patch started life as a response to fedora specific ide subsystem changes that made error handling of my ATAPI tape drive fail; the specifics are in https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=160868 The insertion of the statement rq->errors = err; near the end of ide_end_drive_cmd() in drivers/ide/ide-io.c means that rq->errors does not contain what it needs to in idescsi_end_request() in drivers/scsi/ide-scsi.c anymore. Recent mainline kernels now also have this change. Signed-off-by: Willem Riede <wrlk@riede.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Stefan Richter authored
undefined symbol in Documentation/scsi/scsi_eh.txt Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Jack Hammer authored
IBM has finally agreed that the "Version Matching" between firmware and drivers ( and the resulting warning messages ) is no longer necessary. This patch will remove those functions from the ServeRAID driver. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
- Update raid class to use nested classes for raid components (this will allow us to move to a component control model now) - Make the raid level an enumeration rather than and int. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
There's an oops that sometimes shows up with SCSI transport classes in sysfs_hash_and_remove. The problem is that now, because of the class to device and vice versa symlinks, all classes have to be removed from visibility *before* the device is removed from visibility. The transport class trigger points violate this, so bring them back into conformance. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Bart Oldeman authored
my patch "x86: initialise tss->io_bitmap_owner to something" (commit ID d5cd4aad) introduced a problem with a program (DOSEMU) that called ioperm after already doing some port i/o. The problem is that a process switch return causes tss->io_bitmap_base to be set to IO_BITMAP_OFFSET so that the fault (that *really* sets the io bitmap) never triggers. This fixes that regression. Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 05 Nov, 2005 24 commits
-
-
Samuel Thibault authored
Some visually impaired people use hardware devices which directly read the vga screen. When newt for instance asks to hide the cursor for better visual aspect, the kernel puts the vga cursor out of the screen, so that the cursor position can't be read by the hardware device. This is a great loss for such people. Here is a patch which uses the same technique as CUR_NONE for hiding the cursor while still moving it. Mario, you should apply it to the speakup kernel for access floppies asap. I'll submit a 2.4 patch too. Signed-off-by: samuel.thibault@ens-lyon.org Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Matt Porter authored
Adds a phy_mask field to struct mii_bus and uses it. This field indicates each phy address to be ignored when probing the mdio bus. This support is needed for the fs_enet and ibm_emac drivers to be converted to the generic phy layer among other drivers. Many systems lock up on probing certain phy addresses or probing doesn't return 0xffff when nothing is found at the address. A new driver I'm working on also makes use of this mask. Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Don Fry authored
Some boards using the 79c976 pcnet32 chip will hang the system if the ethtool --register-dump is performed with the device operational. The request to read bcr30 is retried by the PCI device infinitely without returning data, hanging the system. Tested ia32 and ppc64. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Don Fry authored
This patch is a better fix for Allied Telesyn 2700/2701 FX boards than the change made in early January this year. It allows the user to select the speed/duplex via module_param, but if no selection is made, forces the speed to 100 FD. It fixes both Bugzilla bugs 2669 and 4551. Tested ia32 and ppc64 by myself, and by the originator of bug 2669. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Don Fry authored
Display the name eth%d or pci_name() of device which fails to allocate memory. When changing ring size via ethtool, it also releases the lock before returning on error. Added comment that the caller of pcnet32_alloc_ring must call pcnet32_free_ring on error, to avoid leak. Tested ia32 by forcing allocation errors. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ravinandan Arakali authored
Hi, This patch provides updated documentation on the Neterion(S2io) driver. Please review the patch. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ananda Raju authored
Hi, This patch provides dynamic two buffer-mode and 3 buffer-mode options. Previously 2 buffer-mode was compilation option. Now with this patch applied one can load driver in 2 buffer-mode with module-load parameter ie. #insmod s2io.ko rx_ring_mode=2 This patch also provides 3 buffer-mode which provides header separation functionality. In 3 buffer-mode skb->data will have L2/L3/L4 headers and "skb_shinfo(skb)->frag_list->data" will have have L4 payload. one can load driver in 3 buffer-mode with same above module-load parameter ie. #insmod s2io.ko rx_ring_mode=3 Please review the patch. Signed-off-by: Ananda Raju <ananda.raju@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Gabriel A. Devenyi authored
fid is declared as a u32 (unsigned int), and then a few lines later, it is checked for a value < 0, which is clearly useless. In the two locations this function is used, in one it is *explicitly* given a negative number, which would be ignored with the current definition. Thanks to LinuxICC (http://linuxicc.sf.net). Signed-off-by: Gabriel A. Devenyi <ace@staticwave.ca> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Jeff Garzik authored
-
Tejun Heo authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Alan Stern authored
Currently the driver takes a reference only for requests coming by way of the gendisk, not for requests coming by way of the struct device or struct scsi_device. Such requests can arrive in the rescan, flush, and shutdown pathways. The patch also makes the scsi_disk keep a reference to the underlying scsi_device, and it erases the scsi_device's pointer to the scsi_disk when the scsi_device is removed (since the pointer should no longer be used). This resolves Bugzilla entry #5237. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Pierre Ossman authored
The printks that aren't for debugging should use the name of the controller, not the driver name. Multiple MMC controllers aren't that common today, but this is the right way to do things. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Pierre Ossman authored
There is a broken if clause in the wbsd driver that can cause the driver to try and configure the chip even though none is found. This results in i/o on invalid ports. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
James Bottomley authored
It looks like one of the ips patches was missing a closing brace in a function Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
Conflicts in dec_esp.c (Thanks Bacchus), scsi_transport_iscsi.c and scsi_transport_fc.h Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Jeff Garzik authored
Use ata_pad_{alloc,free} in two drivers, to factor out common code. Add ata_pad_{alloc,free} to two other drivers, which needed the padding but had not been updated.
-
Jeff Garzik authored
-
Calin A. Culianu authored
This adds support for the Nvidia Geforce 7800 series of cards to the nvidiafb framebuffer driver. All it does is add the PCI device id for the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work on these cards. I also added the relevant PCI device ids to linux/pci_ids.h I tested it on my 7800 GTX here and it works like a charm. I now can get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text mode to make your eyes BLEED. ;) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
- 04 Nov, 2005 8 commits
-
-
Paul Mackerras authored
We can't currently use asm-ppc/page.h in vmlinux.lds.S, so until we have a merged page.h, define PAGE_SIZE and KERNELBASE locally. Also gets rid of some dynamic executable cruft that we had for 32-bit. With -Ttext=$(KERNELBASE) this didn't cause any problem, but when we changed to putting . = KERNELBASE in the vmlinux.lds.S this cruft caused the text to get linked at 0xa0 instead of 0xc0000000. Oops. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This also moves setup_cpu_maps to setup-common.c (calling it smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Chuck Lever authored
Fix some dprintk's so that NLM, NFS client, and RPC client compile cleanly if CONFIG_SYSCTL is disabled. Test plan: Compile kernel with CONFIG_NFS enabled and CONFIG_SYSCTL disabled. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
The sunrpc module should build properly even when CONFIG_SYSCTL is disabled. Reported by Jan-Benedict Glaw. Test plan: Compile kernel with CONFIG_NFS as a module and built-in, and CONFIG_SYSCTL enabled and disabled. Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Now that we have a method of dealing with delegation recalls, actually enable the caching of posix and BSD locks. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Delegations allow us to cache posix and BSD locks, however when the delegation is recalled, we need to "flush the cache" and send the cached LOCK requests to the server. This patch sets up the mechanism for doing so. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
I missed this one... Any form of rename will result in a delegation recall, so it is more efficient to return the one we hold before trying the rename. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-