Use the proper definitions.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fix gfx info table handling.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The IP discovery table lists is populated by the psp at power on
and includes all of the hw details on the board:
- List of IPs and MMIO offsets
- IP harvest details
- IP configuration details

v2: prefix struct and function names with 'amdgpu'
v3: read table binary from vram using mmMM_INDEX and mmMM_DATA
    update TABLE_BINARY_MAX_SIZE to 64kb (1 TMR)
    add 'instance_number' field per ip info
    consider endianness and replace uint8/16/32_t with u8/16/32
    initialize register base addresses
    initialize adev->gfx.config and adev->gfx.cu_info to replace gpu info fw
    get major and minor version using a single api
    don't expose internal data structures in amdgpu_discovery.h
v4: RCC_CONFIG_MEMSIZE is in MB units
    hold mmio_idx_lock while reading ip discovery binary
v5: pick out discovery.h as a cross-OS header
    do structure pointer cast directly
    consider endianness while using the member of structure
    convert base addresses to dword

at boot up, PSP BL copies ip discovery binary from VBIOS(SPIROM) image to the
top of the frame buffer (just below the reserved regions for PSP & SMU).

ip discovery data table includes the collection of each ip's identification
number, base addresses, version number, and harvest setting placeholder.

gc data table includes gfx info structure.
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In mcbp unit test, the test should detect the preempted job which may
be a partial execution ib and mark it as preempted; so that the gfx
block can correctly generate PM4 frame.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The MCBP unit test is used to test the functionality of MCBP.
It emualtes to send preemption request and resubmit the unfinished
jobs.

v2: squash in fixes (Alex)
v3: squash in memory leak fix (Jack)
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For new submission ib, CE/DE metadata should be programmed to 0;
for partially execution ib, CE/DE metadata should be restored.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allocate CSA for the given sdma ring.
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add ib preemption status in amdgpu_job, so that ring level function
can detect preemption and program for resuming it.

v2: squash in fix to restore job->preamble_status back to status value (Jack)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

CSA is the Context Save Area for preemption.
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add mcbp driver parameter, so that mcbp feature can be
enabled/disabled by driver parameter.
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Used to trigger preemtption
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The trailing fence for ring is used to track the
completion of preemption.
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

can preempt the ring by setting cond_exec to false
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Virtual display is a pure sw implementation of KMS for use
in virtualization and for bring up and emulation.
Signed-off-by: Le.Ma <Le.Ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not used on Navi10.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

So the dependencies are properly handled.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch loades smc ucode at first with psp while rlc auto load is supported
on navi10.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Required for production hw and vddgfx.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When autoload is enabled, there is no need to load mec jt,
RLC will handle it automatically
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

rlc autoload is supported since navi10
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RLC autoload is supported since from Navi10
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

new psp gfx cmd is introuduced for rlc autoload

v2: rebase (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since from navi10, the tmr_size should be decided by psp sos according to
toc header. Driver should issue LOAD_TOC to psp sos to get the tmr_size needed.
The allocation of tmr_size then should be done only when sos/sysdrv loading
completed

Accordingly, asd_init also move to psp_hw_start after sos fw loading to make
calling sequence consistent.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Navi10 will have toc built-in sos binary so that using header.ucode_size_bytes
minus sos_size_bytes actually is not sys_bin_size.

Using sos_offset_bytes works for both vega20 (psp_firmware_header_v1_0) and
navi10 (psp_firmware_header_v1_1)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

RLC handles firmware loading for gfx to support vddgfx feature.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for the new load TOC command.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Update the psp interface for the new commands.

v2: rebase (Alex)

FIXME:
GFX_CMD_ID_PROG_REG     = 0x0000000B,   /* program regs */
GFX_CMD_ID_LOAD_TOC     = 0x0000000B,   /* Load TOC and obtain TMR size */
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support version 1.1.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Print the psp header data if requested.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

print the psp header data like we do for other firmwares.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is to differentiate rlc backdoor autoload from rlc
frontdoor autoload
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Instead of putting toc into driver source code, the toc will
be part of psp_sos fw. Driver need to get and parse it from
psp fw
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

psp_firmware_header_v1_1 is used for psp sos with build-in toc
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Table Of Content (TOC) is used by RLC to auto load gc firmwares.
PSP need to parse the toc to calculate the tmr size needed and
load gc firmwares to tmr for RLC to auto load them finally
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add psp 11.0 code for navi10. psp 11.0 is not enabled for now.
Will enable it when psp 11.0 firmware is available.
Signed-off-by: Tao Zhou <Tao.Zhou1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For bring up.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add another firmware load type AMDGPU_FW_LOAD_RLC_AUTO to support firmware
autoloading new feature in gfx10.

This flag can be leveraged for future engines that need autoload fw.
Signed-off-by: Le.Ma <Le.Ma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Allocate a visible framebuffer to store all gfxip ucodes as the format of TOC.
Signed-off-by: Le.Ma <Le.Ma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

IH is the interrupt handler block.

v1: add initial ih support (Ray)
v2: add dummy prescreen iv function for navi10 (Hawking)
v3: squash in additional updates (Alex)
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

interrupt source packet definitions for the display block (DCN).
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>