- 12 Jan, 2016 8 commits
-
-
Dan Carpenter authored
It used to be that bus->irq was a pointer but after e7f4dc35 ('mdio: Move allocation of interrupts into core') it's an array inside the mdio struct, so it can never be NULL. Let's remove the check. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
It used to be that mdio->irq was a pointer but after e7f4dc35 ('mdio: Move allocation of interrupts into core') it's an array inside the mdio struct so it can never be NULL. Reviewed-by:
-
Dan Carpenter authored
If bus = kzalloc() fails then we end up dereferencing bus when we do "bus->irq[i] = PHY_POLL;". The code is a little simpler if we reverse the NULL check and return directly on failure. Fixes: e7f4dc35 ('mdio: Move allocation of interrupts into core') Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/bonding/bond_main.c drivers/net/ethernet/mellanox/mlxsw/spectrum.h drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c The bond_main.c and mellanox switch conflicts were cases of overlapping changes. Signed-off-by: -
Tom Herbert authored
Obviously need to 'or in NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. Fixes: c8cd0989 ("net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUM") Reported-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== More mdio device build failure fixes These patches fix two build errors reported by Guenter Roeck ==================== Signed-off-by: -
Andrew Lunn authored
dev has moved inside the new mdio structure. Signed-off-by:
-
Andrew Lunn authored
dev has moved inside the new mdio structure. Signed-off-by:
-
- 11 Jan, 2016 32 commits
-
-
Karl Heiss authored
Commit 1f718f0f ("bonding: populate neighbour's private on enslave") undoes the fix provided by commit c2edacf8 ("bonding / ipv6: no addrconf for slaves separately from master") by effectively setting the slave flag after the slave has been opened. If the slave comes up quickly enough, it will go through the IPv6 addrconf before the slave flag has been set and will get a link local IPv6 address. In order to ensure that addrconf knows to ignore the slave devices on state change, set IFF_SLAVE before dev_open() during bonding enslavement. Fixes: 1f718f0f ("bonding: populate neighbour's private on enslave") Signed-off-by:
Karl Heiss <kheiss@gmail.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== net/mlx5_core: Enhance flow steering support v0 --> v1 changes: - fixed improperly formatted comments. - compare value of ib_spec->eth.mask.ether_type in network byte order in ('IB/mlx5: Add flow steering utilities'). v1 --> v2 changes: - made sure that service functions added in the IB driver are only static-fied on the last commit, to make sure bisection with -Werror works fine. v2 --> v3 changes: - squashed patches 11 and 12 into one patch, s.t Dave's comment on unused static functions gcc complaints during bisection is correctly addressed. v3 has been generated against net-next commit c9c99311 "Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge" The series is signed by Matan who was revently assigned to a maintainer for the mlx5_core and IB drivers (this is a 4.5-rc1 change to the maintainers file coming from the rdma tree) -- as such I didn't see a neeed to add my signature (Or). This series adds three new functionalists to the driver flow-steering infrastructure: auto-grouped flow tables, chaining of flow tables and updates for the root flow table. 1. Auto-grouped flow tables - Flow table with auto grouping management. When a flow table is created, hints regarding the number of rule types and the number of rules are given in advance. Thus, a flow table is divided into #NUM_TYPES+1 groups each contains (#NUM_RULES)/(#NUM_TYPES+1) rules. The first #NUM_TYPES parts are groups which are filled if the added rule matches the group specification or the group is empty. The last part is filled by rules that can't fit any of the former groups. 2. Chaining flow tables - Flow tables from different priorities are chained together, if there is no match in flow table of priority i we continue searching for a match in priority i+1. This is both true if priorities i and i+1 belongs to the same namespace or not. 3. Updating the root flow table - the root flow table is the flow table with the lowest level. The hardware start searching for a match in the root flow table and continue according to the matches it find along the way. The first usage for the new functionality is flow steering for user-space ConnectX-4 offloaded HW Eth RX queues done through the mlx5 IB driver. When the mlx5 core driver is loaded, it opens three flow namespaces: 1. By-pass namespace (used by mlx5 IB driver). 2. Kernel namespace (used in order to get packets to the networking stack through mlx5 EN driver). 3. Leftovers namespace (used by mlx5 IB and future sniffer) The series is built as follows: Patch #1 introduces auto-grouped flow tables support. Patch #2 add utility functions for finding the next and the previous flow tables in different priorities. This is used in order to chain the flow tables in a downstream patch. Patch #3 introduces a firmware command for updating the root flow table. Patch #4 introduces modify flow table firmware command, this command is used when we want to change the next flow table of an existing flow table. This is used for chaining flow tables as well. Patch #5 connect/disconnect flow tables. This is actually the chaining process when we want to link flow tables. This means that if we couldn't find a match in the first flow table, we'll continue in the chained flow table. Patch #6 updates priority's attributes that is required for flow table level allocation. We update both the max_fts (the number of allowed FTs in the sub-tree of this priority) and the start_level (which is the first level we'll assign to the flow-tables created inside the priority). Patch #7 adds checking of required device capabilities. Some namespaces could be only created if the hardware supports certain attributes. This is especially true for the Bypass and leftovers namespaces. This adds a generic mechanism to check these required attributes. Patch #8 creates two additional namespaces: a. Bypass flow rules(has nine priorities) b. Leftovers packets(have one priority) - for unmatched packets. Patch #9 re-factors ipv4/ipv6 match fields in the mlx5 firmware interface header to be more clear. Patch #10 exports the flow steering API for mlx5_ib usage Patch #11 implements the required support in mlx5_ib in order to support the RDMA flow steering verbs. ==================== Signed-off-by: -
Maor Gottlieb authored
Adding flow steering support by creating a flow-table per priority (if rules exist in the priority). mlx5_ib uses autogrouping and thus only creates the required destinations. Also includes adding of these flow steering utilities 1. Parsing verbs flow attributes hardware steering specs. 2. Check if flow is multicast - this is required in order to decide to which flow table will we add the steering rule. 3. Set outer headers in flow match criteria to zeros. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
Add exports to flow steering API for mlx5_ib usage. The following functions are exported: 1. mlx5_create_auto_grouped_flow_table - used to create flow table with auto flow grouping management (create and destroy flow groups). In auto-grouped flow tables, we create groups automatically if needed (if we don't find an existing flow group with same match criteria when we add new rule). 2. mlx5_destroy_flow_table - used to destroy a flow table. 3. mlx5_add_flow_rule - used to add flow rule into a flow table. 4. mlx5_del_flow_rule - used to delete flow rule from its flow table. 5. mlx5_get_flow_namespace - used to get a handle to the required namespace sub-tree. Signed-off-by:
-
Maor Gottlieb authored
Change the mlx5 firmware interface header to make it more clear which bytes should be used by IPv4 or IPv6 addresses. Signed-off-by:
-
Maor Gottlieb authored
When the driver is loaded, we create flow steering namespace for kernel bypass with nine priorities and another namespace for leftovers(in order to catch packets that weren't matched). Verbs applications will use these priorities. we found nine as a number that balances the requirements from the user and retains performance. The bypass namespace is used by verbs applications that want to bypass the kernel networking stack. The leftovers namespace is used by verbs applications and the sniffer in order to catch packets that weren't handled by any preceding rules. Signed-off-by:
-
Maor Gottlieb authored
Before we create the sub tree of a steering namespaces(kernel, bypass, leftovers) we check that the device has the required capabilities in order to create this subtree. Signed-off-by:
-
Maor Gottlieb authored
Each priority has two attributes: 1. max_ft - maximum allowed flow tables under this priority. 2. start_level - start level range of the flow tables in the priority. These attributes are set by traversing the tree nodes by DFS and set start level and max flow tables to each priority. Start level depends on the max flow tables of the prior priorities in the tree. The leaves of the trees have max_ft set in them. Each node accumulates the max_ft of its children and set it accordingly. Signed-off-by:
-
Maor Gottlieb authored
Flow tables from different priorities should be chained together. When a packet arrives we search for a match in the by-pass flow tables (first we search for a match in priority 0 and if we don't find a match we move to the next priority). If we can't find a match in any of the bypass flow-tables, we continue searching in the flow-tables of the next priority, which are the kernel's flow tables. Setting the miss flow table in a new flow table to be the next one in the list is performed via create flow table API. If we want to change an existing flow table, for example in order to point from an existing flow table to the new next-in-list flow table, we use the modify flow table API. Signed-off-by:
-
Maor Gottlieb authored
Introduce the modify flow table command. This command is used when we want to change the next flow table of an existing flow table. The next flow table is defined as the table we search (in order to find a match), if we couldn't find a match in any of the flow table entries in the current flow table. Signed-off-by:
-
Maor Gottlieb authored
The root Flow Table for each Flow Table Type is defined, by default, as the Flow Table with level 0. In order not to use an empty flow tables and introduce new hops, but still preserve space for flow-tables that have a priority greater(lower number) than the current flow table, we introduce this new set root flow table command. This command tells the HW to start matching packets from the assigned root flow table. This command is used when we create new flow table with level lower than the current lowest flow table or it is the first flow table. Signed-off-by:
-
Maor Gottlieb authored
Add two utility functions for find next and prev flow table. Find next flow table function gets priority and return the first flow table of the next priority in the tree. Find prev flow table return the last flow table of the previous priority in the tree. These utility functions are used for chaining flow table from different priorities. Signed-off-by:
-
Maor Gottlieb authored
When user add rule to autogrouped flow table, we search for flow group with the same match criteria, if we don't find such group then we create new flow group with the required match criteria and insert the rule to this group. We divide the flow table into required_groups + 1, in order to reserve a part of the flow table for rules which don't match any existing group. Signed-off-by:
-
Michal Kubeček authored
Commit acf8dd0a ("udp: only allow UFO for packets from SOCK_DGRAM sockets") disallows UFO for packets sent from raw sockets. We need to do the same also for SOCK_DGRAM sockets with SO_NO_CHECK options, even if for a bit different reason: while such socket would override the CHECKSUM_PARTIAL set by ip_ufo_append_data(), gso_size is still set and bad offloading flags warning is triggered in __skb_gso_segment(). In the IPv6 case, SO_NO_CHECK option is ignored but we need to disallow UFO for packets sent by sockets with UDP_NO_CHECK6_TX option. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Tested-by:
Shannon Nelson <shannon.nelson@intel.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
John Fastabend authored
Fix possible null pointer dereference that may occur when calling skb_reserve() on a null skb. Fixes: 879c7220 ("net: pktgen: Observe needed_headroom of the device") Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF update This set adds IPv6 support for bpf_skb_{set,get}_tunnel_key() helper. It also exports flags to user space that are being used in helpers and weren't exported thus far. For more details, please see the individual patches. ==================== Signed-off-by: -
Daniel Borkmann authored
After IPv6 support has recently been added to metadata dst and related encaps, add support for populating/reading it from an eBPF program. Commit d3aa45ce ("bpf: add helpers to access tunnel metadata") started with initial IPv4-only support back then (due to IPv6 metadata support not being available yet). To stay compatible with older programs, we need to test for the passed structure size. Also TOS and TTL support from the ip_tunnel_info key has been added. Tested with vxlan devs in collect meta data mode with IPv4, IPv6 and in compat mode over different network namespaces. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Daniel Borkmann authored
Export flags used by eBPF helper functions through UAPI, so they can be used by programs (instead of them redefining all flags each time or just using the hard-coded values). It also gives a better overview what flags are used where and we can further get rid of the extra macros defined in filter.c. Moreover, reject invalid flags. Signed-off-by:
-
David S. Miller authored
Sergei Shtylyov says: ==================== Fix some dubious code in the Renesas Ethernet drivers Here's a set of 2 patches against DaveM's 'net.git' repo. While initializing EMAC the code tries to respect the duplex mode both programmed into ECMR and stored in its own private data -- this just can't be right. [1/2] ravb: stop reading ECMR in ravb_emac_init() [2/2] sh_eth: stop reading ECMR in sh_eth_dev_init() ==================== Signed-off-by: -
Sergei Shtylyov authored
The code in sh_eth_dev_init() twiddling the ECMR bits always looked a bit strange to me: if one intends to respect 'mdp->duplex', why save old value of the ECMR.DM bit? As all the other bits are zeroed anyway, we don't really need to read ECMR before writing to it. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
The code in ravb_emac_init() twiddling the ECMR bits always looked a bit strange to me: if one intends to respect 'priv->duplex', why save old value of the ECMR.DM bit? As all the other bits are zeroed anyway, we don't really need to read ECMR before writing to it. Signed-off-by:
-
Jamal Hadi Salim authored
only when user space passes the addresses should we consider their presence Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Neal Cardwell authored
For tcp_yeah, use an ssthresh floor of 2, the same floor used by Reno and CUBIC, per RFC 5681 (equation 4). tcp_yeah_ssthresh() was sometimes returning a 0 or negative ssthresh value if the intended reduction is as big or bigger than the current cwnd. Congestion control modules should never return a zero or negative ssthresh. A zero ssthresh generally results in a zero cwnd, causing the connection to stall. A negative ssthresh value will be interpreted as a u32 and will set a target cwnd for PRR near 4 billion. Oleksandr Natalenko reported that a system using tcp_yeah with ECN could see a warning about a prior_cwnd of 0 in tcp_cwnd_reduction(). Testing verified that this was due to tcp_yeah_ssthresh() misbehaving in this way. Reported-by:
Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jarod Wilson authored
The spew in /proc/net/bonding/bond0 uses netif_carrier_ok() to determine mii_status, while /sys/class/net/bond0/bonding/mii_status looks at curr_active_slave, which doesn't actually seem to be set sometimes when the bond actually is up. A mode 4 bond configured via ifcfg-foo files on a Red Hat Enterprise Linux system, after boot, comes up clean and functional, but the sysfs node shows mii_status of down, while proc shows up. A simple enough fix here seems to be to use the same method for determining up or down in both places, and I'd opt for the one that seems to match reality. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: netdev@vger.kernel.org Signed-off-by:
-
Marcelo Ricardo Leitner authored
Dmitry Vyukov reported a use-after-free in the code expanded by the macro debug_post_sfx, which is caused by the use of the asoc pointer after it was freed within sctp_side_effect() scope. This patch fixes it by allowing sctp_side_effect to clear that asoc pointer when the TCB is freed. As Vlad explained, we also have to cover the SCTP_DISPOSITION_ABORT case because it will trigger DELETE_TCB too on that same loop. Also, there were places issuing SCTP_CMD_INIT_FAILED and ASSOC_FAILED but returning SCTP_DISPOSITION_CONSUME, which would fool the scheme above. Fix it by returning SCTP_DISPOSITION_ABORT instead. The macro is already prepared to handle such NULL pointer. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Alexander Kuleshov authored
The sz_idx variable is defined in the rtnetlink_rcv_msg(), but not used anywhere. Let's remove it. Signed-off-by:
Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by:
-
Ido Schimmel authored
Dumping the FDB (invoked with a process context) or handling FDB notifications (polled periodicly in delayed work) might each entail multiple EMAD transcations due to the number of entries. While we only allow one EMAD transaction at a time, there is nothing stopping the dump and notification processing sessions from interleaving. However, this is forbidden by the hardware, so we need to make sure only one of these sessions can run at a time. Solve this by adding a mutex ('fdb_lock'), as both kernel threads can sleep while waiting for the response EMAD. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
willy tarreau authored
It is possible for a process to allocate and accumulate far more FDs than the process' limit by sending them over a unix socket then closing them to keep the process' fd count low. This change addresses this problem by keeping track of the number of FDs in flight per user and preventing non-privileged processes from having more FDs in flight than their configured FD limit. Reported-by: socketpair@gmail.com Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Mitigates: CVE-2013-4312 (Linux 2.0+) Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Guenter Roeck authored
Use phy_find_first() to find the first phy device instead of open-coding it. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
David S. Miller authored
Jean Sacren says: ==================== Trivial fix-ups for openvswitch This series does trivial fix-ups for openvswitch as follows: 1) Clean up the leftover of the unused function. 2) Fix up the twisted struct geneve_port member name. 3) Update the kernel doc to reflect the changes in struct vport. ==================== Signed-off-by: -
Jean Sacren authored
commit be4ace6e ("openvswitch: Move dev pointer into vport itself") The commit above added @dev and moved @rcu to the bottom of struct vport, but the change was not reflected in the kernel doc. So let's update the kernel doc as well. Signed-off-by:
Jean Sacren <sakiwit@gmail.com> Cc: Thomas Graf <tgraf@suug.ch> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Jean Sacren authored
commit 6b001e68 ("openvswitch: Use Geneve device.") The commit above introduced 'port_no' as the name for the member of struct geneve_port. The correct name should be 'dst_port' as described in the kernel doc. Let's fix that member name and all the pertinent instances so that both doc and code would be consistent. Signed-off-by:
-
