- 22 Jan, 2005 10 commits
-
-
Johannes Stezenbach authored
- [DVB] dvb-ttpci: re-added support for Fujitsu-Siemens DVB-S rev 1.6 0x13c2:0x0006 - [DVB] dvb-ttpci: finally clean up debi irq/tasklet handling to make it work on SMP - [DVB] dvb-ttpci: misc. changes to av7110_send_fw_cmd() error handling done along the way - [DVB] dvb-ttpci: budgetpatch integrated into dvb-ttpci: enables full ts option running in parallel with all previous functions of dvb-ttpci - [DVB] dvb-ttpci: fix Oops provoked by insmod/rmmod test loop, patch by Emard - [DVB] budget: Fixed start_ts_capture(): saa7146 will not issue a VPE interrupt if VPE bit is set in PSR and VPE interrupts are enabled afterwards. - [DVB] budget: enable satelco support. code was commented out, but actually it works, patch by Emard - [DVB] budget: Budget patch improved driver, fixed slight packet loss by using different trigger mode Signed-off-by:Michael Hunold <hunold@linuxtv.org> Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Johannes Stezenbach authored
- [DVB] mt352: exported a mt352_read_reg-function, implemented a single byte write_register function (needed for dibusb) - [DVB] nxt2002: patch by Taylor Jacob to add support for ATSC/VSB frontends and the B2C2/BBTI Air2PC-ATSC card - [DVB] stv0297: fix tuning problems and compile time warnings, patch by Markus Breitenberger - [DVB] fix spelling errors in various frontend drivers Signed-off-by: -
Johannes Stezenbach authored
- [DVB] dib3000: driver refactoring, makes it easier to support device clones Signed-off-by:
-
Johannes Stezenbach authored
- [DVB] dvb-core: vfree() checking cleanups, patch by Domen Puncer - [DVB] dvb-core: fix handling of discontinuity indicator in section filter, bug reported by Frank Rosengart - [DVB] dvb-core: handle PUSI in section filter correctly, patch by Emard, bug reported by Patrick Valsecchi - [DVB] dvb-core: add support for ATSC/VSB frontends, patch by Taylor Jacob - [DVB] dvb-core: removed semi-colon from a very wrong place; FE_ENABLE_HIGH_LNB_VOLTAGE kernel oops; thanks to Christophe Massiot - [DVB] dvb-core: Fixed slow tuning problems, remove frequeny bending support from frontend code, code simplification Signed-off-by: -
Johannes Stezenbach authored
- [DVB] nxt2002: add support for nxt2002 frontend (firmware extraction, Kconfig, driver) - [DVB] skystar2: misc cleanup, remove unneeded casts, remove unreachable code, patches by Francois Romieu - [DVB] skystar2: fix mt352 clock setting for VHF (6 and 7 MHz bw channels), patch by Thomas Martin and Dieter Zander: - [DVB] b2c2-usb-core: fix file permissions to be octal, ISO C90 compile fix, temporally repaired the request_types - [DVB] remove remains of dibusb driver after splitup Signed-off-by: -
Johannes Stezenbach authored
- [DVB] dvb-dibusb: refactoring of the dibusb driver, support for device clones from Yakumo/HAMA/Typhoon/HanfTek, update the documentation Signed-off-by: -
Johannes Stezenbach authored
- [DVB] dvb-bt8xx: add support for pinnacle pctv-sat, patch by Peter Hettkamp and Adam Szalkowski - [DVB] dvb-bt8xx: minor code cleanups, patch by Arne Ahrend - [DVB] dvb-bt8xx: make sure to compile all necessary frontend modules, remove misleading comment Signed-off-by:
-
Johannes Stezenbach authored
- [DVB] saa7146: explicitely disable RPS tasks in saa7146_init_one() Signed-off-by:
-
Roland McGrath authored
The PPC64 ABI specifies that the stack should be kept aligned to 16 bytes. However, signal handlers on PPC64 are getting run with the stack misaligned (sp % 16 == 8). This patch fixes that by ensuring that the signal frame allocated is a multiple of 16 bytes. In addition to the PPC64 signal frame itself being of misaligned size, the explicit alignment of the starting stack pointer is also to 8 instead of 16. I've corrected this as well, so signal frames are aligned even if the interrupted registers contained a misaligned stack pointer. Signed-off-by:
Roland McGrath <roland@redhat.com> [ Paul Mackerras <paulus@samba.org> acked the original patch (which also did it for the 32-bit cases), and pointed out that the 32-bit cases all already did the alignment elsewhere and didn't need this. Patch edited down accordingly. ] Signed-off-by:
-
Zou Nanhai authored
There is a bug in copy_page_range with 4 level page table change. copy_page_range do a continue without adding pgds and addr when pgd_none(*src_pgd) or pgd_bad(*src_pgd). Signed-off-by:
Zou Nan hai <nanhai.zou@intel.com> Acked-by:
Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
- 21 Jan, 2005 30 commits
-
-
Linus Torvalds authored
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Richard Purdie authored
Patch from Richard Purdie Add USB Device Controller support to the corgi machines (Sharp SL-C7xx series). Signed-off-by: Richard Purdie Signed-off-by: Russell King
-
Richard Purdie authored
Patch from Richard Purdie Make sure the PXA Corgi ssp driver flushes the ssp port before suspending. Signed-off-by: Richard Purdie Signed-off-by: Russell King
-
Ben Dooks authored
Patch from Ben Dooks Add overview of the HP iPAQ rx3715, as well as listing Shannon Holland in the contributors. Signed-off-by: Ben Dooks Signed-off-by: Russell King
-
Nicolas Pitre authored
Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre Signed-off-by: Russell King
-
bk://bk.arm.linux.org.uk/linux-2.6-mmcLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Pierre Ossman authored
Patch from Pierre Ossman This patch includes the latest changes to the wbsd driver. * Proper usage of kunmap. * Comment about hw bugs. * Waits for data transfers to finish properly. * Added module version info. * FIFO bug fix for small reads. * Optimised FIFO loop. * DMA demand mode. * IRQ race condition when sending commands fixed.
-
bk://kernel.bkbits.net/vojtech/inputLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Roland McGrath authored
The RLIMIT_CPU limit is in seconds, not in jiffies. Signed-off-by:
-
Roland McGrath authored
There's 1000 msecs in a second. No relation to HZ, which just happens to be 1000 in some cases. Signed-off-by: -
Petr Vandrovec authored
The x86-64 kernel incorrectly marks the 32-bit vsyscall page mapping at virtual address 0xffffe000 as a global one, even though that mapping does not exist globally. As such, task switches do not correctly invalidate the mapping, and strange behaviour ensues if a 64-bit program happens to use that same virtual address for something else. Signed-off-by: -
Jens Axboe authored
If md resides on top of a driver using bio_clone() (such as dm), it will oops the kernel due to md submitting a botched bio that has a veclist but doesn't have bio->bi_max_vecs set. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Andrew Morton authored
Make the declaration match the definition.. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
Thomas Gleixner authored
Use the new lock initializers DEFINE_SPIN_LOCK and DEFINE_RW_LOCK Signed-off-by:
-
