The tps65010.c driver in the main tree never got updated with
build fixes since the last batch of I2C driver changes; and the
genirq trigger flags were updated wierdly too.

This also includes a minor tweak to reduce the frequency used to
poll for unplug-the-AC-power on the TPS chips that don't provide
relevant IRQs.  It _would_ be nice to sense whether there's even
a battery, but that'd normally be an HDQ/1-wire interface to a
smart battery, and such APIs aren't standardized.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The callers of scsi_send_eh_cmnd are setting the cmnd buffer,
and then scsi_send_eh_cmnd is copying that updated buffer to
the old_cmnd variable. Then after the command runs, we end up
copying that old_cmnd var which has the new cmnd to the scsi
command buffer. When this command gets recent, all types of fun
things happen like getting TUR or START_STOP commands with
data and scatterlists.

This patch made against scsi-rc-fixes, has the callers of
scsi_send_eh_cmnd pass in the command so scsi_send_eh_cmnd
can do the right thing. This should go into 2.6.18 since this
fixes a regression added when we removed some of the scsi_cmnd
fields and replaced them with local variables.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Software must explicitely re-enable extended firmware tracing
after any ISP abort condition.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Original code attempts to retry PLOGIs to fcports that are
FCP_TARGETs only.  If the driver never performed a successful
PLOGI/PRLI, the port-type would never be assigned, and the
relogin logic would silently drop the request (and thus the port
would not be recognized and registered).

The fix is relatively straightforward, drop the FCP_TARGET-only
check.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

There's a problem where sg is executing a ->nopage operation on a
compound page, it actually calls get_page() on the first page in the
compound rather than the page which is being mapped.  The fix is to
select the correct page by indexing into the compound.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The check in open_exec() for inode->i_mode & 0111 has been made
redundant by the fix to permission().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 1d3741c5d991686699f100b65b9956f7ee7ae0ae commit)

The check in prepare_binfmt() for inode->i_mode & 0111 is redundant,
since open_exec() will already have done that.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 822dec482ced07af32c378cd936d77345786572b commit)

Currently, the access() call will return incorrect information on NFS if
there exists an ACL that grants execute access to the user on a regular
file. The reason the information is incorrect is that the VFS overrides
this execute access in open_exec() by checking (inode->i_mode & 0111).

This patch propagates the VFS execute bit check back into the generic
permission() call.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 64cbae98848c4c99851cb0a405f0b4982cd76c1e commit)

This is needed in order to handle any NFS4ERR_DELAY errors that might be
returned by the server. It also ensures that we map the NFSv4 errors before
they are returned to userland.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 71c12b3f0abc7501f6ed231a6d17bc9c05a238dc commit)

Check the bounds of length specifiers more thoroughly in the XDR decoding of
NFS4 readdir reply data.

Currently, if the server returns a bitmap or attr length that causes the
current decode point pointer to wrap, this could go undetected (consider a
small "negative" length on a 32-bit machine).

Also add a check into the main XDR decode handler to make sure that the amount
of data is a multiple of four bytes (as specified by RFC-1014).  This makes
sure that we can do u32* pointer subtraction in the NFS client without risking
an undefined result (the result is undefined if the pointers are not correctly
aligned with respect to one another).
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 5861fddd64a7eaf7e8b1a9997455a24e7f688092 commit)

Neil Brown observed that the current limit of 32 bytes isn't enough to hold two
ip addresses and the rest of the stuff we're putting in it, so it's often
truncated to the point where it's unlikely to be unique.  This can cause
spurious CLID_INUSE's from the server.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from fc8c17ec251e984ab3df9182ed097aa5b577c915 commit)

Some hardware uses port 664 for its hardware-based IPMI listener.  Teach
the RPC client to avoid using that port by raising the default minimum port
number to 665.

Test plan:
Find a mainboard known to use port 664 for IPMI; enable IPMI; mount NFS
servers in a tight loop.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 58e8cb3a035d22fc386e1c53a5d98c3f219530fb commit)

The problem is that we may be caching writes that would extend the file and
create a hole in the region that we are reading. In this case, we need to
detect the eof from the server, ensure that we zero out the pages that
are part of the hole and mark them as up to date.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 856b603b01b99146918c093969b6cb1b1b0f1c01 commit)

nlm_traverse_files() is not allowed to hold the nlm_file_mutex while calling
nlm_inspect file, since it may end up calling nlm_release_file() when
releaseing the blocks.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from e558d3cde986e04f68afe8c790ad68ef4b94587a commit)

rpc_unlink() and rpc_rmdir() will dput the dentry reference for you.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from a05a57effa71a1f67ccbfc52335c10c8b85f3f6a commit)

A prior call to rpc_depopulate() by rpc_rmdir() on the parent directory may
have already called simple_unlink() on this entry.
Add the same check to rpc_rmdir(). Also remove a redundant call to
rpc_close_pipes() in rpc_rmdir.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 0bbfb9d20f6437c4031aa3bf9b4d311a053e58e3 commit)

Make it take a dentry argument instead of a path
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 648d4116eb2509f010f7f34704a650150309b3e7 commit)

Signe-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 88bf6d811b01a4be7fd507d18bf5f1c527989089 commit)

I'm trying to speeding up mkdir(2) for network file systems.  A typical
mkdir(2) calls two inode_operations: lookup and mkdir.  The lookup
operation would fail with ENOENT in common case.  I think it is unnecessary
because the subsequent mkdir operation can check it.  In case of creat(2),
lookup operation is called with the LOOKUP_CREATE flag, so individual
filesystem can omit real lookup.  e.g.  nfs_lookup().

Here is a sample patch which uses LOOKUP_CREATE and O_EXCL on mkdir,
symlink and mknod.  This uses the gadget for creat(2).

And here is the result of a benchmark on NFSv3.
  mkdir(2) 10,000 times:
    original  50.5 sec
    patched   29.0 sec
Signed-off-by: ASANO Masahiro <masano@tnes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from fab7bf44449b29f9d5572a5dd8adcf7c91d5bf0f commit)

nfs_wb_page() waits on request completion and, as a result, is not safe to be
called from nfs_release_page() invoked by VM scanner as part of GFP_NOFS
allocation. Fix possible deadlock by analyzing gfp mask and refusing to
release page if __GFP_FS is not set.
Signed-off-by: Nikita Danilov <danilov@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(cherry picked from 374d969debfb290bafcb41d28918dc6f7e43ce31 commit)

The subsystem check in the PAV code is incorrect, it enables PAV
per device instead of per subsystem.
Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

vt6420 has super-fragile SCR registers which can hang the whole
machine if accessed with the wrong timings.  This patch makes sata_via
use SCR registers only during probing and with the same timings as
before (pre new EH), which is proven to work.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This patch implements force_pcs module parameter for ata_piix.  If 1,
PCS is ignored, 2 honored.  As there seem to be quite a few ICHs w/
impaired PCS, this option will be useful for cases where the default
setting doesn't work.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

There have been a number of reports regarding some ICH5s failing to
detect devices since the PCS handling update.  Analysis shows that
these problems are caused by bogus PCS values from those controllers.

Before the PCS update, the driver didn't honor PCS regs exactly and
probed them in many cases PCS reports no device.  Now that PCS is
honored exactly, these hardware problems are visible.

This patch makes ICH5 ignore PCS.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Merge branch 'upstream-greg' of gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

spectrum_cs: Fix the logic so we error when the device is *not* present!

This fixes firmware upload failures which prevent the driver from
working (the bug is also present in 2.6.17).
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

A change I made for 2.6.17 and another for 2.6.18 do not work on older
pcnet32 chips which I do not have access to.  If the chip is a 79C970 or
79C965, do not try and suspend or check the link status.
I have tested with a 79C970A, 79C971, 79C972, 79C973, 79C975, 79C976,
and 79C978.
Signed-off-by: Don Fry <brazilnut@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

I am using a Xircom CEM33 pcmcia NIC which has occasional hardware problems.
If the netdev watchdog detects a transmit timeout, do_reset is called which
msleeps - this is illegal in atomic context.

This patch schedules the timeout handling as a workqueue item.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

while playing with gcc 4.1 -Wextra warnings, I came across this one:

drivers/net/3c515.c:1027: warning: comparison of unsigned expression >= 0 is always true

Since i is unsigned the >= 0 check in the for loop is always true,
so we might spin there forever unless the if condition triggers.
Since i is only used in this loop, this patch changes it to
an integer.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

On Tue, 2006-08-15 at 08:22 -0700, Dave Hansen wrote:
> kernel BUG in cache_free_debugcheck at mm/slab.c:2748!

Alright, this one is only triggered when slab debugging is enabled.  The
slabs are assumed to be aligned on a HUGEPTE_TABLE_SIZE boundary.  The free
path makes use of this assumption and uses the lowest nibble to pass around
an index into an array of kmem_cache pointers.  With slab debugging turned
on, the slab is still aligned, but the "working" object pointer is not.
This would break the assumption above that a full nibble is available for
the PGF_CACHENUM_MASK.

The following patch reduces PGF_CACHENUM_MASK to cover only the two least
significant bits, which is enough to cover the current number of 4 pgtable
cache types.  Then use this constant to mask out the appropriate part of
the huge pte pointer.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: David S. Miller <davem@davemloft.net>