- 19 Feb, 2016 27 commits
-
-
Andrey Konovalov authored
commit 07d86ca9 upstream. The 'umidi' object will be free'd on the error path by snd_usbmidi_free() when tearing down the rawmidi interface. So we shouldn't try to free it in snd_usbmidi_create() after having registered the rawmidi interface. Found by KASAN. Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Guillaume Fougnies authored
commit 5a4ff9ec upstream. TEAC UD-501/UD-503/NT-503 fail to switch properly between different rate/format. Similar to 'Playback Design', this patch corrects the invalid clock source error for TEAC products and avoids complete freeze of the usb interface of 503 series. Signed-off-by: Guillaume Fougnies <guillaume@eulerian.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit 0ebf7f10 upstream. The thing got broken back in 2002 - sysvfs does *not* have inline symlinks; even short ones have bodies stored in the first block of file. sysv_symlink() handles that correctly; unfortunately, attempting to look an existing symlink up will end up confusing them for inline symlinks, and interpret the block number containing the body as the body itself. Nobody has noticed until now, which says something about the level of testing sysvfs gets ;-/ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tiffany Lin authored
commit d9a98588 upstream. In videobuf2 dma-contig memory type the prepare and finish ops, instead of passing the number of entries in the original scatterlist as the "nents" parameter to dma_sync_sg_for_device() and dma_sync_sg_for_cpu(), the value returned by dma_map_sg() was used. Albeit this has been suggested in comments of some implementations (which have since been corrected), this is wrong. Fixes: 199d101e ("v4l: vb2-dma-contig: add prepare/finish to dma-contig allocator") Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrzej Hajda authored
commit 655e9780 upstream. Alignment/padding rules on AMD64 and ARM64 differs. To allow properly match compatible ioctls on ARM64 kernels without breaking AMD64 some fields should be aligned using compat_s64 type and in one case struct should be unpacked. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> [hans.verkuil@cisco.com: use compat_u64 instead of compat_s64 in v4l2_input32] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Helge Deller authored
commit e60fc5aa upstream. On a 64bit kernel build the compiler aligns the _sifields union in the struct siginfo_t on a 64bit address. The __ARCH_SI_PREAMBLE_SIZE define compensates for this alignment and thus fixes the wait testcase of the strace package. The symptoms of a wrong __ARCH_SI_PREAMBLE_SIZE value is that _sigchld.si_stime variable is missed to be copied and thus after a copy_siginfo() will have uninitialized values. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 71a71fb5 upstream. On parisc syscalls which are interrupted by signals sometimes failed to restart and instead returned -ENOSYS which in the worst case lead to userspace crashes. A similiar problem existed on MIPS and was fixed by commit e967ef02 ("MIPS: Fix restart of indirect syscalls"). On parisc the current syscall restart code assumes that all syscall callers load the syscall number in the delay slot of the ble instruction. That's how it is e.g. done in the unistd.h header file: ble 0x100(%sr2, %r0) ldi #syscall_nr, %r20 Because of that assumption the current code never restored %r20 before returning to userspace. This assumption is at least not true for code which uses the glibc syscall() function, which instead uses this syntax: ble 0x100(%sr2, %r0) copy regX, %r20 where regX depend on how the compiler optimizes the code and register usage. This patch fixes this problem by adding code to analyze how the syscall number is loaded in the delay branch and - if needed - copy the syscall number to regX prior returning to userspace for the syscall restart. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit dcbf0d29 upstream. Drop the MADV_xxK_PAGES flags, which were never used and were from a proposed API which was never integrated into the generic Linux kernel code. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Leiserson authored
commit 904dad47 upstream. "group" is the group where the backup will be placed, and is initialized to zero in the declaration. This meant that backups for meta_bg descriptors were erroneously written to the backup block group descriptors in groups 1 and (desc_per_block-1). Reproduction information: mke2fs -Fq -t ext4 -b 1024 -O ^resize_inode /tmp/foo.img 16G truncate -s 24G /tmp/foo.img losetup /dev/loop0 /tmp/foo.img mount /dev/loop0 /mnt resize2fs /dev/loop0 umount /dev/loop0 dd if=/dev/zero of=/dev/loop0 bs=1024 count=2 e2fsck -fy /dev/loop0 losetup -d /dev/loop0 Signed-off-by: Andy Leiserson <andy@leiserson.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit bc23f0c8 upstream. Ted and Namjae have reported that truncated pages don't get timely reclaimed after being truncated in data=journal mode. The following test triggers the issue easily: for (i = 0; i < 1000; i++) { pwrite(fd, buf, 1024*1024, 0); fsync(fd); fsync(fd); ftruncate(fd, 0); } The reason is that journal_unmap_buffer() finds that truncated buffers are not journalled (jh->b_transaction == NULL), they are part of checkpoint list of a transaction (jh->b_cp_transaction != NULL) and have been already written out (!buffer_dirty(bh)). We clean such buffers but we leave them in the checkpoint list. Since checkpoint transaction holds a reference to the journal head, these buffers cannot be released until the checkpoint transaction is cleaned up. And at that point we don't call release_buffer_page() anymore so pages detached from mapping are lingering in the system waiting for reclaim to find them and free them. Fix the problem by removing buffers from transaction checkpoint lists when journal_unmap_buffer() finds out they don't have to be there anymore. Reported-and-tested-by: Namjae Jeon <namjae.jeon@samsung.com> Fixes: de1b7941Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boris BREZILLON authored
commit e5bae867 upstream. If we fail to allocate a partition structure in the middle of the partition creation process, the already allocated partitions are never removed, which means they are still present in the partition list and their resources are never freed. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hon Ching \(Vicky\) Lo authored
commit 60ecd86c upstream. At ibm vtpm initialzation, tpm_ibmvtpm_probe() registers its interrupt handler, ibmvtpm_interrupt, which calls ibmvtpm_crq_process to allocate memory for rtce buffer. The current code uses 'GFP_KERNEL' as the type of kernel memory allocation, which resulted a warning at kernel/lockdep.c. This patch uses 'GFP_ATOMIC' instead so that the allocation is high-priority and does not sleep. Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uri Mashiach authored
commit e47301b0 upstream. Fix the below Oops when trying to modprobe wlcore_spi. The oops occurs because the wl1271_power_{off,on}() function doesn't check the power() function pointer. [ 23.401447] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 23.409954] pgd = c0004000 [ 23.412922] [00000000] *pgd=00000000 [ 23.416693] Internal error: Oops: 80000007 [#1] SMP ARM [ 23.422168] Modules linked in: wl12xx wlcore mac80211 cfg80211 musb_dsps musb_hdrc usbcore usb_common snd_soc_simple_card evdev joydev omap_rng wlcore_spi snd_soc_tlv320aic23_i2c rng_core snd_soc_tlv320aic23 c_can_platform c_can can_dev snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap omap_wdt musb_am335x cpufreq_dt thermal_sys hwmon [ 23.453253] CPU: 0 PID: 36 Comm: kworker/0:2 Not tainted 4.2.0-00002-g951efee-dirty #233 [ 23.461720] Hardware name: Generic AM33XX (Flattened Device Tree) [ 23.468123] Workqueue: events request_firmware_work_func [ 23.473690] task: de32efc0 ti: de4ee000 task.ti: de4ee000 [ 23.479341] PC is at 0x0 [ 23.482112] LR is at wl12xx_set_power_on+0x28/0x124 [wlcore] [ 23.488074] pc : [<00000000>] lr : [<bf2581f0>] psr: 60000013 [ 23.488074] sp : de4efe50 ip : 00000002 fp : 00000000 [ 23.500162] r10: de7cdd00 r9 : dc848800 r8 : bf27af00 [ 23.505663] r7 : bf27a1a8 r6 : dcbd8a80 r5 : dce0e2e0 r4 : dce0d2e0 [ 23.512536] r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : dc848810 [ 23.519412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 23.527109] Control: 10c5387d Table: 9cb78019 DAC: 00000015 [ 23.533160] Process kworker/0:2 (pid: 36, stack limit = 0xde4ee218) [ 23.539760] Stack: (0xde4efe50 to 0xde4f0000) [...] [ 23.665030] [<bf2581f0>] (wl12xx_set_power_on [wlcore]) from [<bf25f7ac>] (wlcore_nvs_cb+0x118/0xa4c [wlcore]) [ 23.675604] [<bf25f7ac>] (wlcore_nvs_cb [wlcore]) from [<c04387ec>] (request_firmware_work_func+0x30/0x58) [ 23.685784] [<c04387ec>] (request_firmware_work_func) from [<c0058e2c>] (process_one_work+0x1b4/0x4b4) [ 23.695591] [<c0058e2c>] (process_one_work) from [<c0059168>] (worker_thread+0x3c/0x4a4) [ 23.704124] [<c0059168>] (worker_thread) from [<c005ee68>] (kthread+0xd4/0xf0) [ 23.711747] [<c005ee68>] (kthread) from [<c000f598>] (ret_from_fork+0x14/0x3c) [ 23.719357] Code: bad PC value [ 23.722760] ---[ end trace 981be8510db9b3a9 ]--- Prevent oops by validationg power() pointer value before calling the function. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uri Mashiach authored
commit 9b2761cb upstream. The maximum chunks used by the function is (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE + 1). The original commands array had space for (SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) commands. When the last chunk is used (len > 4 * WSPI_MAX_CHUNK_SIZE), the last command is stored outside the bounds of the commands array. Oops 5 (page fault) is generated during current wl1271 firmware load attempt: root@debian-armhf:~# ifconfig wlan0 up [ 294.312399] Unable to handle kernel paging request at virtual address 00203fc4 [ 294.320173] pgd = de528000 [ 294.323028] [00203fc4] *pgd=00000000 [ 294.326916] Internal error: Oops: 5 [#1] SMP ARM [ 294.331789] Modules linked in: bnep rfcomm bluetooth ipv6 arc4 wl12xx wlcore mac80211 musb_dsps cfg80211 musb_hdrc usbcore usb_common wlcore_spi omap_rng rng_core musb_am335x omap_wdt cpufreq_dt thermal_sys hwmon [ 294.351838] CPU: 0 PID: 1827 Comm: ifconfig Not tainted 4.2.0-00002-g3e9ad27-dirty #78 [ 294.360154] Hardware name: Generic AM33XX (Flattened Device Tree) [ 294.366557] task: dc9d6d40 ti: de550000 task.ti: de550000 [ 294.372236] PC is at __spi_validate+0xa8/0x2ac [ 294.376902] LR is at __spi_sync+0x78/0x210 [ 294.381200] pc : [<c049c760>] lr : [<c049ebe0>] psr: 60000013 [ 294.381200] sp : de551998 ip : de5519d8 fp : 00200000 [ 294.393242] r10: de551c8c r9 : de5519d8 r8 : de3a9000 [ 294.398730] r7 : de3a9258 r6 : de3a9400 r5 : de551a48 r4 : 00203fbc [ 294.405577] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : de3a9000 [ 294.412420] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 294.419918] Control: 10c5387d Table: 9e528019 DAC: 00000015 [ 294.425954] Process ifconfig (pid: 1827, stack limit = 0xde550218) [ 294.432437] Stack: (0xde551998 to 0xde552000) ... [ 294.883613] [<c049c760>] (__spi_validate) from [<c049ebe0>] (__spi_sync+0x78/0x210) [ 294.891670] [<c049ebe0>] (__spi_sync) from [<bf036598>] (wl12xx_spi_raw_write+0xfc/0x148 [wlcore_spi]) [ 294.901661] [<bf036598>] (wl12xx_spi_raw_write [wlcore_spi]) from [<bf21c694>] (wlcore_boot_upload_firmware+0x1ec/0x458 [wlcore]) [ 294.914038] [<bf21c694>] (wlcore_boot_upload_firmware [wlcore]) from [<bf24532c>] (wl12xx_boot+0xc10/0xfac [wl12xx]) [ 294.925161] [<bf24532c>] (wl12xx_boot [wl12xx]) from [<bf20d5cc>] (wl1271_op_add_interface+0x5b0/0x910 [wlcore]) [ 294.936364] [<bf20d5cc>] (wl1271_op_add_interface [wlcore]) from [<bf15c4ac>] (ieee80211_do_open+0x44c/0xf7c [mac80211]) [ 294.947963] [<bf15c4ac>] (ieee80211_do_open [mac80211]) from [<c0537978>] (__dev_open+0xa8/0x110) [ 294.957307] [<c0537978>] (__dev_open) from [<c0537bf8>] (__dev_change_flags+0x88/0x148) [ 294.965713] [<c0537bf8>] (__dev_change_flags) from [<c0537cd0>] (dev_change_flags+0x18/0x48) [ 294.974576] [<c0537cd0>] (dev_change_flags) from [<c05a55a0>] (devinet_ioctl+0x6b4/0x7d0) [ 294.983191] [<c05a55a0>] (devinet_ioctl) from [<c0517040>] (sock_ioctl+0x1e4/0x2bc) [ 294.991244] [<c0517040>] (sock_ioctl) from [<c017d378>] (do_vfs_ioctl+0x420/0x6b0) [ 294.999208] [<c017d378>] (do_vfs_ioctl) from [<c017d674>] (SyS_ioctl+0x6c/0x7c) [ 295.006880] [<c017d674>] (SyS_ioctl) from [<c000f4c0>] (ret_fast_syscall+0x0/0x54) [ 295.014835] Code: e1550004 e2444034 0a00007d e5953018 (e5942008) [ 295.021544] ---[ end trace 66ed188198f4e24e ]--- Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 157f38f9 upstream. Fix parent-device reference leak due to SPI-core taking an unnecessary reference to the parent when allocating the master structure, a reference that was never released. Note that driver core takes its own reference to the parent when the master device is registered. Fixes: 49dce689 ("spi doesn't need class_device") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Mosberger-Tang authored
commit 06515f83 upstream. The DMA-slave configuration depends on the whether <= 8 or > 8 bits are transferred per word, so we need to call atmel_spi_dma_slave_config() with the correct value. Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mauricio Faria de Oliveira authored
commit 47796938 upstream. This reverts commit a1989b33. That commit introduced a regression at least for the case of the SG_IO ioctl() running without CAP_SYS_RAWIO capability (e.g., unprivileged users) when there are no active paths: the ioctl() fails with the ENOTTY errno immediately rather than blocking due to queue_if_no_path until a path becomes active, for example. That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices (qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]) from multipath devices; which leads to SCSI/filesystem errors in such a guest. More general scenarios can hit that regression too. The following demonstration employs a SG_IO ioctl() with a standard SCSI INQUIRY command for this objective (some output & user changes omitted for brevity and comments added for clarity). Reverting that commit restores normal operation (queueing) in failing scenarios; tested on linux-next (next-20151022). 1) Test-case is based on sg_simple0 [3] (just SG_IO; remove SG_GET_VERSION_NUM) $ cat sg_simple0.c ... see [3] ... $ sed '/SG_GET_VERSION_NUM/,/}/d' sg_simple0.c > sgio_inquiry.c $ gcc sgio_inquiry.c -o sgio_inquiry 2) The ioctl() works fine with active paths present. # multipath -l 85ag56 85ag56 (...) dm-19 IBM ,2145 size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=0 status=active | |- 8:0:11:0 sdz 65:144 active undef running | `- 9:0:9:0 sdbf 67:144 active undef running `-+- policy='service-time 0' prio=0 status=enabled |- 8:0:12:0 sdae 65:224 active undef running `- 9:0:12:0 sdbo 68:32 active undef running $ ./sgio_inquiry /dev/mapper/85ag56 Some of the INQUIRY command's response: IBM 2145 0000 INQUIRY duration=0 millisecs, resid=0 3) The ioctl() fails with ENOTTY errno with _no_ active paths present, for unprivileged users (rather than blocking due to queue_if_no_path). # for path in $(multipath -l 85ag56 | grep -o 'sd[a-z]\+'); \ do multipathd -k"fail path $path"; done # multipath -l 85ag56 85ag56 (...) dm-19 IBM ,2145 size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=0 status=enabled | |- 8:0:11:0 sdz 65:144 failed undef running | `- 9:0:9:0 sdbf 67:144 failed undef running `-+- policy='service-time 0' prio=0 status=enabled |- 8:0:12:0 sdae 65:224 failed undef running `- 9:0:12:0 sdbo 68:32 failed undef running $ ./sgio_inquiry /dev/mapper/85ag56 sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device 4) dmesg shows that scsi_verify_blk_ioctl() failed for SG_IO (0x2285); it returns -ENOIOCTLCMD, later replaced with -ENOTTY in vfs_ioctl(). $ dmesg <...> [] device-mapper: multipath: Failing path 65:144. [] device-mapper: multipath: Failing path 67:144. [] device-mapper: multipath: Failing path 65:224. [] device-mapper: multipath: Failing path 68:32. [] sgio_inquiry: sending ioctl 2285 to a partition! 5) The ioctl() only works if the SYS_CAP_RAWIO capability is present (then queueing happens -- in this example, queue_if_no_path is set); this is due to a conditional check in scsi_verify_blk_ioctl(). # capsh --drop=cap_sys_rawio -- -c './sgio_inquiry /dev/mapper/85ag56' sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device # ./sgio_inquiry /dev/mapper/85ag56 & [1] 72830 # cat /proc/72830/stack [<c00000171c0df700>] 0xc00000171c0df700 [<c000000000015934>] __switch_to+0x204/0x350 [<c000000000152d4c>] msleep+0x5c/0x80 [<c00000000077dfb0>] dm_blk_ioctl+0x70/0x170 [<c000000000487c40>] blkdev_ioctl+0x2b0/0x9b0 [<c0000000003128e4>] block_ioctl+0x64/0xd0 [<c0000000002dd3b0>] do_vfs_ioctl+0x490/0x780 [<c0000000002dd774>] SyS_ioctl+0xd4/0xf0 [<c000000000009358>] system_call+0x38/0xd0 6) This is the function call chain exercised in this analysis: SYSCALL_DEFINE3(ioctl, <...>) @ fs/ioctl.c -> do_vfs_ioctl() -> vfs_ioctl() ... error = filp->f_op->unlocked_ioctl(filp, cmd, arg); ... -> dm_blk_ioctl() @ drivers/md/dm.c -> multipath_ioctl() @ drivers/md/dm-mpath.c ... (bdev = NULL, due to no active paths) ... if (!bdev || <...>) { int err = scsi_verify_blk_ioctl(NULL, cmd); if (err) r = err; } ... -> scsi_verify_blk_ioctl() @ block/scsi_ioctl.c ... if (bd && bd == bd->bd_contains) // not taken (bd = NULL) return 0; ... if (capable(CAP_SYS_RAWIO)) // not taken (unprivileged user) return 0; ... printk_ratelimited(KERN_WARNING "%s: sending ioctl %x to a partition!\n" <...>); return -ENOIOCTLCMD; <- ... return r ? : <...> <- ... if (error == -ENOIOCTLCMD) error = -ENOTTY; out: return error; ... Links: [1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52 [2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device') [3] http://tldp.org/HOWTO/SCSI-Generic-HOWTO/pexample.html (Revision 1.2, 2002-05-03) Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry V. Levin authored
commit 2d33fa10 upstream. According to arch/sh/kernel/syscalls_64.S and common sense, __NR_fgetxattr has to be defined to 259, but it doesn't. Instead, it's defined to 269, which is of course used by another syscall, __NR_sched_setaffinity in this case. This bug was found by strace test suite. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
xuejiufei authored
commit c95a5180 upstream. When recovery master down, dlm_do_local_recovery_cleanup() only remove the $RECOVERY lock owned by dead node, but do not clear the refmap bit. Which will make umount thread falling in dead loop migrating $RECOVERY to the dead node. Signed-off-by: xuejiufei <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
xuejiufei authored
commit bef5502d upstream. We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by: Jiufei Xue <xuejiufei@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Weinberger authored
commit 9d8a7652 upstream. sigsuspend() is nowhere used except in signal.c itself, so we can mark it static do not pollute the global namespace. But this patch is more than a boring cleanup patch, it fixes a real issue on UserModeLinux. UML has a special console driver to display ttys using xterm, or other terminal emulators, on the host side. Vegard reported that sometimes UML is unable to spawn a xterm and he's facing the following warning: WARNING: CPU: 0 PID: 908 at include/linux/thread_info.h:128 sigsuspend+0xab/0xc0() It turned out that this warning makes absolutely no sense as the UML xterm code calls sigsuspend() on the host side, at least it tries. But as the kernel itself offers a sigsuspend() symbol the linker choose this one instead of the glibc wrapper. Interestingly this code used to work since ever but always blocked signals on the wrong side. Some recent kernel change made the WARN_ON() trigger and uncovered the bug. It is a wonderful example of how much works by chance on computers. :-) Fixes: 68f3f16d ("new helper: sigsuspend()") Signed-off-by: Richard Weinberger <richard@nod.at> Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 92792e48 upstream. Recent gcc versions warn about reading from a negative offset of an on-stack array: drivers/remoteproc/remoteproc_debugfs.c: In function 'rproc_recovery_write': drivers/remoteproc/remoteproc_debugfs.c:167:9: warning: 'buf[4294967295u]' may be used uninitialized in this function [-Wmaybe-uninitialized] I don't see anything in sys_write() that prevents us from being called with a zero 'count' argument, so we should add an extra check in rproc_recovery_write() to prevent the access and avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 2e37abb8 ("remoteproc: create a 'recovery' debugfs entry") Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ioan-Adrian Ratiu authored
commit e470127e upstream. The critical section protected by usbhid->lock in hid_ctrl() is too big and because of this it causes a recursive deadlock. "Too big" means the case statement and the call to hid_input_report() do not need to be protected by the spinlock (no URB operations are done inside them). The deadlock happens because in certain rare cases drivers try to grab the lock while handling the ctrl irq which grabs the lock before them as described above. For example newer wacom tablets like 056a:033c try to reschedule proximity reads from wacom_intuos_schedule_prox_event() calling hid_hw_request() -> usbhid_request() -> usbhid_submit_report() which tries to grab the usbhid lock already held by hid_ctrl(). There are two ways to get out of this deadlock: 1. Make the drivers work "around" the ctrl critical region, in the wacom case for ex. by delaying the scheduling of the proximity read request itself to a workqueue. 2. Shrink the critical region so the usbhid lock protects only the instructions which modify usbhid state, calling hid_input_report() with the spinlock unlocked, allowing the device driver to grab the lock first, finish and then grab the lock afterwards in hid_ctrl(). This patch implements the 2nd solution. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Snitzer authored
commit 30ce6e1c upstream. The block allocated at the start of btree_split_sibling() is never released if later insert_at() fails. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Herbert Xu authored
commit 4afa5f96 upstream. The hash_accept call fails to work on sockets that have not received any data. For some algorithm implementations it may cause crashes. This patch fixes this by ensuring that we only export and import on sockets that have received data. Reported-by: Harsh Jain <harshjain.prof@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
In the backport of 1eaf35e4, the call to usb_disabled() was too late, after we had already done some allocation. Move that call to the top of the function instead, making the logic match what is intended and is in the original patch. Reported-by: Luis Henriques <luis.henriques@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
libin authored
commit c84da8b9 upstream. In nop_mcount, shdr->sh_offset and welp->r_offset should handle endianness properly, otherwise it will trigger Segmentation fault if the recordmcount main and file.o have different endianness. Link: http://lkml.kernel.org/r/563806C7.7070606@huawei.comSigned-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 29 Jan, 2016 13 commits
-
-
Greg Kroah-Hartman authored
-
Guenter Roeck authored
commit c86576ea upstream. mn10300 builds fail with fs/stat.c: In function 'cp_old_stat': fs/stat.c:163:2: error: 'old_uid_t' undeclared ipc/util.c: In function 'ipc64_perm_to_ipc_perm': ipc/util.c:540:2: error: 'old_uid_t' undeclared Select CONFIG_HAVE_UID16 and remove local definition of CONFIG_UID16 to fix the problem. Fixes: fbc416ff ("arm64: fix building without CONFIG_UID16") Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Morton authored
commit 04ea1e91 upstream. openrisc-allnoconfig: kernel/uid16.c: In function 'SYSC_setgroups16': kernel/uid16.c:184:2: error: implicit declaration of function 'groups_alloc' kernel/uid16.c:184:13: warning: assignment makes pointer from integer without a cast openrisc shouldn't be setting CONFIG_UID16 when CONFIG_MULTIUSER=n. Fixes: 2813893f ("kernel: conditionally support non-root users, groups and capabilities") Reported-by: Fengguang Wu <fengguang.wu@gmail.com> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Richard Purdie authored
commit 79b568b9 upstream. hid_connect adds various strings to the buffer but they're all conditional. You can find circumstances where nothing would be written to it but the kernel will still print the supposedly empty buffer with printk. This leads to corruption on the console/in the logs. Ensure buf is initialized to an empty string. Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org> [dvhart: Initialize string to "" rather than assign buf[0] = NULL;] Cc: Jiri Kosina <jikos@kernel.org> Cc: linux-input@vger.kernel.org Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit e46e31a3 upstream. When using the Promise TX2+ SATA controller on PA-RISC, the system often crashes with kernel panic, for example just writing data with the dd utility will make it crash. Kernel panic - not syncing: drivers/parisc/sba_iommu.c: I/O MMU @ 000000000000a000 is out of mapping resources CPU: 0 PID: 18442 Comm: mkspadfs Not tainted 4.4.0-rc2 #2 Backtrace: [<000000004021497c>] show_stack+0x14/0x20 [<0000000040410bf0>] dump_stack+0x88/0x100 [<000000004023978c>] panic+0x124/0x360 [<0000000040452c18>] sba_alloc_range+0x698/0x6a0 [<0000000040453150>] sba_map_sg+0x260/0x5b8 [<000000000c18dbb4>] ata_qc_issue+0x264/0x4a8 [libata] [<000000000c19535c>] ata_scsi_translate+0xe4/0x220 [libata] [<000000000c19a93c>] ata_scsi_queuecmd+0xbc/0x320 [libata] [<0000000040499bbc>] scsi_dispatch_cmd+0xfc/0x130 [<000000004049da34>] scsi_request_fn+0x6e4/0x970 [<00000000403e95a8>] __blk_run_queue+0x40/0x60 [<00000000403e9d8c>] blk_run_queue+0x3c/0x68 [<000000004049a534>] scsi_run_queue+0x2a4/0x360 [<000000004049be68>] scsi_end_request+0x1a8/0x238 [<000000004049de84>] scsi_io_completion+0xfc/0x688 [<0000000040493c74>] scsi_finish_command+0x17c/0x1d0 The cause of the crash is not exhaustion of the IOMMU space, there is plenty of free pages. The function sba_alloc_range is called with size 0x11000, thus the pages_needed variable is 0x11. The function sba_search_bitmap is called with bits_wanted 0x11 and boundary size is 0x10 (because dma_get_seg_boundary(dev) returns 0xffff). The function sba_search_bitmap attempts to allocate 17 pages that must not cross 16-page boundary - it can't satisfy this requirement (iommu_is_span_boundary always returns true) and fails even if there are many free entries in the IOMMU space. How did it happen that we try to allocate 17 pages that don't cross 16-page boundary? The cause is in the function iommu_coalesce_chunks. This function tries to coalesce adjacent entries in the scatterlist. The function does several checks if it may coalesce one entry with the next, one of those checks is this: if (startsg->length + dma_len > max_seg_size) break; When it finishes coalescing adjacent entries, it allocates the mapping: sg_dma_len(contig_sg) = dma_len; dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); sg_dma_address(contig_sg) = PIDE_FLAG | (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT) | dma_offset; It is possible that (startsg->length + dma_len > max_seg_size) is false (we are just near the 0x10000 max_seg_size boundary), so the funcion decides to coalesce this entry with the next entry. When the coalescing succeeds, the function performs dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE); And now, because of non-zero dma_offset, dma_len is greater than 0x10000. iommu_alloc_range (a pointer to sba_alloc_range) is called and it attempts to allocate 17 pages for a device that must not cross 16-page boundary. To fix the bug, we must make sure that dma_len after addition of dma_offset and alignment doesn't cross the segment boundary. I.e. change if (startsg->length + dma_len > max_seg_size) break; to if (ALIGN(dma_len + dma_offset + startsg->length, IOVP_SIZE) > max_seg_size) break; This patch makes this change (it precalculates max_seg_boundary at the beginning of the function iommu_coalesce_chunks). I also added a check that the mapping length doesn't exceed dma_get_seg_boundary(dev) (it is not needed for Promise TX2+ SATA, but it may be needed for other devices that have dma_get_seg_boundary lower than dma_get_max_seg_size). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Will Deacon authored
commit 32d63978 upstream. In paging_init, we allocate the zero page, memset it to zero and then point TTBR0 to it in order to avoid speculative fetches through the identity mapping. In order to guarantee that the freshly zeroed page is indeed visible to the page table walker, we need to execute a dsb instruction prior to writing the TTBR. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Blackwood authored
commit 5db4fd8c upstream. Make sure to clear out any ptrace singlestep state when a ptrace(2) PTRACE_DETACH call is made on arm64 systems. Otherwise, the previously ptraced task will die off with a SIGTRAP signal if the debugger just previously singlestepped the ptraced task. Signed-off-by: John Blackwood <john.blackwood@ccur.com> [will: added comment to justify why this is in the arch code] Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit fbc416ff upstream. As reported by Michal Simek, building an ARM64 kernel with CONFIG_UID16 disabled currently fails because the system call table still needs to reference the individual function entry points that are provided by kernel/sys_ni.c in this case, and the declarations are hidden inside of #ifdef CONFIG_UID16: arch/arm64/include/asm/unistd32.h:57:8: error: 'sys_lchown16' undeclared here (not in a function) __SYSCALL(__NR_lchown, sys_lchown16) I believe this problem only exists on ARM64, because older architectures tend to not need declarations when their system call table is built in assembly code, while newer architectures tend to not need UID16 support. ARM64 only uses these system calls for compatibility with 32-bit ARM binaries. This changes the CONFIG_UID16 check into CONFIG_HAVE_UID16, which is set unconditionally on ARM64 with CONFIG_COMPAT, so we see the declarations whenever we need them, but otherwise the behavior is unchanged. Fixes: af1839eb ("Kconfig: clean up the long arch list for the UID16 config option") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ulrich Weigand authored
commit 2e50c4be upstream. If a text section starts out with a data blob before the first function start label, disassembly parsing doing in recordmcount.pl gets confused on powerpc, leading to creation of corrupted module objects. This was not a problem so far since the compiler would never create such text sections. However, this has changed with a recent change in GCC 6 to support distances of > 2GB between a function and its assoicated TOC in the ELFv2 ABI, exposing this problem. There is already code in recordmcount.pl to handle such data blobs on the sparc64 platform. This patch uses the same method to handle those on powerpc as well. Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boqun Feng authored
commit 81d7a329 upstream. According to memory-barriers.txt, xchg*, cmpxchg* and their atomic_ versions all need to be fully ordered, however they are now just RELEASE+ACQUIRE, which are not fully ordered. So also replace PPC_RELEASE_BARRIER and PPC_ACQUIRE_BARRIER with PPC_ATOMIC_ENTRY_BARRIER and PPC_ATOMIC_EXIT_BARRIER in __{cmp,}xchg_{u32,u64} respectively to guarantee fully ordered semantics of atomic{,64}_{cmp,}xchg() and {cmp,}xchg(), as a complement of commit b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics") This patch depends on patch "powerpc: Make value-returning atomics fully ordered" for PPC_ATOMIC_ENTRY_BARRIER definition. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Boqun Feng authored
commit 49e9cf3f upstream. According to memory-barriers.txt: > Any atomic operation that modifies some state in memory and returns > information about the state (old or new) implies an SMP-conditional > general memory barrier (smp_mb()) on each side of the actual > operation ... Which mean these operations should be fully ordered. However on PPC, PPC_ATOMIC_ENTRY_BARRIER is the barrier before the actual operation, which is currently "lwsync" if SMP=y. The leading "lwsync" can not guarantee fully ordered atomics, according to Paul Mckenney: https://lkml.org/lkml/2015/10/14/970 To fix this, we define PPC_ATOMIC_ENTRY_BARRIER as "sync" to guarantee the fully-ordered semantics. This also makes futex atomics fully ordered, which can avoid possible memory ordering problems if userspace code relies on futex system call for fully ordered semantics. Fixes: b97021f8 ("powerpc: Fix atomic_xxx_return barrier semantics") Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Neuling authored
commit d2b9d2a5 upstream. Currently we allow both the MSR T and S bits to be set by userspace on a signal return. Unfortunately this is a reserved configuration and will cause a TM Bad Thing exception if attempted (via rfid). This patch checks for this case in both the 32 and 64 bit signals code. If both T and S are set, we mark the context as invalid. Found using a syscall fuzzer. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ido Schimmel authored
[ Upstream commit 60a6531b ] We can't be within an RCU read-side critical section when deleting VLANs, as underlying drivers might sleep during the hardware operation. Therefore, replace the RCU critical section with a mutex. This is consistent with team_vlan_rx_add_vid. Fixes: 3d249d4c ("net: introduce ethernet teaming device") Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-