The variable retval is assigned constant values twice, and can therefore
be replaced by its values.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl error "space prohibited before/after that
parenthesis".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl error "space required after that ','".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl warning "spaces preferred around that <op>".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl error "else should follow close brace '}'" and
"trailing statements should be on next line".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl error "space required before the open brace '{'".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use tabs instead of spaces for indentation.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix below warning reported by checkpatch

CHECK: Comparison to NULL could be written
"!precvpriv->pallocated_frame_buf"
CHECK: Comparison to NULL could be written "padapter"
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
-----
changes in v2:
		Corected few erorrs like (!*psta == NULL) pointed in
		review
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/kpc2000/kpc2000_i2c.c:652:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Fixes: 43ad3819 ("staging: kpc2000: kpc_i2c: add static qual to local symbols in kpc_i2c.c")
CC: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As per below information

GFP_KERNEL  FLAG

This is a normal allocation and might block. This is the flag to use in
process context code when it is safe to sleep.

GFP_ATOMIC FLAG

The allocation is high-priority and does not sleep. This is the flag to
use in interrupt handlers, bottom halves and other situations where you
cannot sleep

And we can take advantage of GFP_KERNEL , as when system is in low
memory chances of getting success is high compared to GFP_ATOMIC.

As visornic_probe is in  process context we can use GPF_KERNEL.
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kpc_i2c.c declares:
  - two functions
    - pi2c_probe()
    - pi2c_remove()
  - one struct
    - i2c_plat_driver_i
which are local to the file, yet missing the static qualifier. Add the
static qualifier to these symbols.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Many of the functions in kpc_i2c log debug-level messages to the
kernel log message buffer upon invocation. This is unnecessary, as
debugging tools like kgdb, kdb, etc. or the tracing tool ftrace
should be able to provide this same information. Therefore, remove
these print statements.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rather than include asm/io.h, include linux/io.h. Issue reported
by the script checkpatch.pl.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The linux coding style document states:

  1) That braces should not be used where a single single statement
     will do. Therefore all instances of single block statements
     wrapped in braces that do not meet the qualifications of any
     of the exceptions to the rule should be fixed up.

  2) That the declaration of variables local to a given function
     should be immediately followed by a blank newline. Therefore,
     the single instance of this in kpc2000_i2c.c should be fixed
     up.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The module parameter 'disable_features' is currently unused. Therefore,
it should be removed.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clang warns:

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:2663:47: warning:
address of array 'param->u.wpa_ie.data' will always evaluate to 'true'
[-Wpointer-bool-conversion]
            (param->u.wpa_ie.len && !param->u.wpa_ie.data))
                                    ~~~~~~~~~~~~~~~~~^~~~

This was exposed by commit deabe035 ("Staging: rtl8192u: ieee80211:
Use !x in place of NULL comparisons") because we disable the warning
that would have pointed out the comparison against NULL is also false:

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:2663:46: warning:
comparison of array 'param->u.wpa_ie.data' equal to a null pointer is
always false [-Wtautological-pointer-compare]
            (param->u.wpa_ie.len && param->u.wpa_ie.data == NULL))
                                    ~~~~~~~~~~~~~~~~^~~~    ~~~~

Remove it so clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/487Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the attribute show call-backs check whether pcard is NULL.  However,
pci_set_drvdata(pdev, pcard) is called before the sysfs files are
created during probe, and pci_set_drvdata(pdev, NULL) is not called
until after they are destroyed during remove; therefore, pcard will not
be NULL, and we can drop the checks.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the call-backs used the same formula to retrieve the pcard from dev:

  struct pci_dev *pdev = to_pci_dev(dev);
  struct kp2000_device *pcard;

  if (!pdev)
    return NULL;

  pcard = pci_get_drvdata(pdev);

Since to_pci_dev is a wrapper for container_of, it will not return NULL,
and since pci_get_drvdata just calls dev_get_drvdata on the dev member
of pdev, this is equivalent to:

  struct kp2000_device *pcard = dev_get_drvdata(&(container_of(dev, struct pci_dev, dev)->dev));

and we can simplify it to:

  struct kp2000_device *pcard = dev_get_drvdata(dev);
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Previously the next card number was assigned from a static int local
variable.  Replaced it with an IDA.  Avoids the assignment of ever-
increasing card-numbers by allowing them to be reused.

Updated TODO.

Corrected format-specifier for unsigned pcard->card_num.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: kpc2000: added separate show functions for readable kp device attributes, defined them as read-only, and declared them static.

Defined separate simple show functions for each attribute instead of
having a one big one containing a chain of conditionals.

Replaced calls to scnprintf with sprintf since all the outputs are
single integers.

All the readable device attributes are read-only, so used DEVICE_ATTR_RO
to define them.

The definitions are only used to populate the kp_attr_list attribute
array, so declared them as static.

Fixes the following sparse warnings:

  drivers/staging/kpc2000/kpc2000/core.c:152:1: warning: symbol 'dev_attr_ssid' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/core.c:153:1: warning: symbol 'dev_attr_ddna' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/core.c:154:1: warning: symbol 'dev_attr_card_id' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/core.c:155:1: warning: symbol 'dev_attr_hw_rev' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/core.c:156:1: warning: symbol 'dev_attr_build' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/core.c:157:1: warning: symbol 'dev_attr_build_date' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/core.c:158:1: warning: symbol 'dev_attr_build_time' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/core.c:159:1: warning: symbol 'dev_attr_cpld_reg' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/core.c:161:1: warning: symbol 'dev_attr_cpld_reconfigure' was not declared. Should it be static?
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The attribute call-backs all use the same formula to get the pcard from
dev:

  struct pci_dev *pdev = to_pci_dev(dev);
  struct kp2000_device *pcard;

  if (!pdev)
    return -ENXIO;
  pcard = pci_get_drvdata(pdev);
  if (!pcard)
    return -ENXIO;

Added a function to reduce the duplicated code.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

  * Indented with tabs.
  * Broke lines over 80 columns where possible.
  * Removed braces from one-statement blocks.
  * Tidied up some comments.
  * Removed multiple blank lines.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following Coverity warning:

File: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c in function
rtw_dbg_port():

CID 18480: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
dead_error_condition: The condition (extra_arg & 7U) > 7U cannot be true.

        if ((extra_arg & 0x07) > 0x07)
                padapter->driver_ampdu_spacing = 0xFF;
        else
                padapter->driver_ampdu_spacing = extra_arg;
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The masking update of pkg_offset is redundant as the updated
value is never read and pkg_offset is re-assigned on the next
iteration of the loop.  Clean this up by removing the redundant
assignment.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The arcx-anybus's registers are accessed via a memory-mapped
IO region. A regmap associated with this region is created
using custom reg_read() / reg_write() callbacks.

However, an abstraction which creates a memory-mapped IO
region backed regmap already exists: devm_regmap_init_mmio().

Replace the custom regmap with the existing kernel abstraction.
As a pleasant side-effect, sparse warnings now disappear.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change (x == NULL) to !x and (x != NULL) to x, to fix
following checkpatch.pl warnings:
CHECK: Comparison to NULL could be written "!x".
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change comparison to zero to !x.
Replace (x == 0) to !x.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use "%s", __func__ in place of strings which contain function names.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove functions which just print the name of function and return 0,
These functions fake the network core to say that they support these
options.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The show functions of two attributes output nothing and they are unused.
Removed them.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Reported-by: Matt Sickler <matt.sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: kpc2000: added separate show functions for kpc_uio_class device attributes, defined them as read-only and declared them static.

Defined separate simple show functions for each attribute instead of
having a one big one containing a chain of conditionals.

Replaced scnprintf calls with sprintf since all the outputs are short
bounded strings or single integers.

All of the device attributes are read-only, so used DEVICE_ATTR_RO to
define them.

The definitions are only used to populate the kpc_uio_class_attrs
attribute array, so declared them as static.

Fixes the following sparse warnings:

  drivers/staging/kpc2000/kpc2000/cell_probe.c:220:1: warning: symbol 'dev_attr_offset' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/cell_probe.c:221:1: warning: symbol 'dev_attr_size' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/cell_probe.c:222:1: warning: symbol 'dev_attr_type' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/cell_probe.c:223:1: warning: symbol 'dev_attr_s2c_dma' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/cell_probe.c:224:1: warning: symbol 'dev_attr_c2s_dma' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/cell_probe.c:225:1: warning: symbol 'dev_attr_irq_count' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/cell_probe.c:226:1: warning: symbol 'dev_attr_irq_base_num' was not declared. Should it be static?
  drivers/staging/kpc2000/kpc2000/cell_probe.c:227:1: warning: symbol 'dev_attr_core_num' was not declared. Should it be static?
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove local variable psdio which is declared but not used (or returned)
in its function.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishka.dasgupta@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Check for error during device initialization callback and return a
meaningful error code or zero on success.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid discarding function's return code during register initialization.
Handle it instead and return 0 on success or a negative errno value on
error.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Check on called function's returned value for error and return 0 on
success or a negative errno value on error instead of a boolean value.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid discarding return value of functions called during firmware
management process. Handle such return value and return 0 on success or
a negative errno value on error.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change some of the driver's functions in order to handle error codes
instead of discarding them. These function now returns 0 on success and
a negative errno value on error.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid discarding called function's returned value. Store it instead in
order to act accordingly.

Update error path to return 0 on success and a negative errno value on
error.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vnt_free_tx_bufs() relies on priv->tx_context elements to be NULL if
they are not initialized (as vnt_free_rx_bufs() does). Add a check to
these elements in order to avoid NULL pointer dereference.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix following checkpatch.pl warning by adding braces around if
statement:
CHECK: braces {} should be used on all arms of this statement
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>