- 20 Aug, 2016 40 commits
-
-
Alex Deucher authored
commit 7f555c8e upstream. Looks like this got missed when we ported the code from radeon. Reviewed-by:
Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit a8a04c99 upstream. Some of the checks didn't handle frev 2 tables properly. amdgpu doesn't support any tables pre-frev 2, so drop the checks. Signed-off-by:
-
Lyude authored
commit 23a1a9e5 upstream. Just about all of amdgpu's connector probing functions try to acquire runtime PM refs. If we try to do this in the context of amdgpu_resume_kms by calling drm_helper_hpd_irq_event(), we end up deadlocking the system. Since we're guaranteed to be holding the spinlock for RPM in amdgpu_resume_kms, and we already know the GPU is in working order, we need to prevent the RPM helpers from trying to run during the initial connector reprobe on resume. There's a couple of solutions I've explored for fixing this, but this one by far seems to be the simplest and most reliable (plus I'm pretty sure that's what disable_depth is there for anyway). Reproduction recipe: - Get any laptop dual GPUs using PRIME - Make sure runtime PM is enabled for amdgpu - Boot the machine - If the machine managed to boot without hanging, switch out of X to another VT. This should definitely cause X to hang infinitely. Changes since v1: - add appropriate #ifdef checks for CONFIG_PM. This is not very useful, but it appears some kernel test suites test compiling amdgpu with CONFIG_PM disabled, which results in this patch breaking the builds if we don't include this #ifdef Cc: Alex Deucher <alexdeucher@gmail.com> Reviewed-by:
Lyude <cpaul@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit dba6c4fa upstream. Same interface as other UNIPHY blocks Signed-off-by:
-
Lyude authored
commit b636a1b3 upstream. DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not disconnections. Because of this, we end up losing hotplug polling for analog connectors once they get connected. Easy way to reproduce: - Grab a machine with an AMD GPU and a VGA port - Plug a monitor into the VGA port, wait for it to update the connector from disconnected to connected - Disconnect the monitor on VGA, a hotplug event is never sent for the removal of the connector. Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good idea since doing VGA polling can sometimes result in having to mess with the DAC voltages to figure out whether or not there's actually something there since VGA doesn't have HPD. Doing this would have the potential of showing visible artifacts on the screen every time we ran a poll while a VGA display was connected. Luckily, amdgpu_vga_detect() only resorts to this sort of polling if the poll is forced, and DRM's polling helper doesn't force it's polls. Additionally, this removes some assignments to connector->polled that weren't actually doing anything. Signed-off-by:
-
Alex Deucher authored
commit f81eb1a3 upstream. ATPX dGPU power control requires a 200ms delay between power off and on. This should fix dGPU failures on resume from power off. Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
H. Nikolaus Schaller authored
commit ecfaf0c4 upstream. Commit e93762bb ("w1: masters: omap_hdq: add support for 1-wire mode") added a statement to clear the hdq_irqstatus flags in hdq_read_byte(). If the hdq reading process is scheduled slowly or interrupts are disabled for a while the hardware read activity might already be finished on entry of hdq_read_byte(). And hdq_isr() already has set the hdq_irqstatus to 0x6 (can be seen in debug mode) denoting that both, the TXCOMPLETE and RXCOMPLETE interrupts occurred in parallel. This means there is no need to wait and the hdq_read_byte() can just read the byte from the hdq controller. By resetting hdq_irqstatus to 0 the read process is forced to be always waiting again (because the if statement always succeeds) but the hardware will not issue another RXCOMPLETE interrupt. This results in a false timeout. After such a situation the hdq bus hangs. Link: http://lkml.kernel.org/r/b724765f87ad276a69625bc19806c8c8844c4590.1469513669.git.hns@goldelico.comSigned-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Paul Moore authored
commit 0e0e3677 upstream. It seems risky to always rely on the caller to ensure the socket's address family is correct before passing it to the NetLabel kAPI, especially since we see at least one LSM which didn't. Add address family checks to the *_delattr() functions to help prevent future problems. Reported-by:
Maninder Singh <maninder1.s@samsung.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Hans de Goede authored
commit fc51b632 upstream. It seems that recent kernels have a shorter timeout when scanning for ethernet phys causing us to hit a timeout on boards where the phy's regulator gets enabled just before scanning, which leads to non working ethernet. A 10ms startup delay seems to be enough to fix it, this commit adds a 20ms startup delay just to be safe. This has been tested on a sun4i-a10-a1000 and sun5i-a10s-wobo-i5 board, both of which have non-working ethernet on recent kernels without this fix. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Paul Moore authored
commit 43761473 upstream. There is a double fetch problem in audit_log_single_execve_arg() where we first check the execve(2) argumnets for any "bad" characters which would require hex encoding and then re-fetch the arguments for logging in the audit record[1]. Of course this leaves a window of opportunity for an unsavory application to munge with the data. This patch reworks things by only fetching the argument data once[2] into a buffer where it is scanned and logged into the audit records(s). In addition to fixing the double fetch, this patch improves on the original code in a few other ways: better handling of large arguments which require encoding, stricter record length checking, and some performance improvements (completely unverified, but we got rid of some strlen() calls, that's got to be a good thing). As part of the development of this patch, I've also created a basic regression test for the audit-testsuite, the test can be tracked on GitHub at the following link: * https://github.com/linux-audit/audit-testsuite/issues/25 [1] If you pay careful attention, there is actually a triple fetch problem due to a strnlen_user() call at the top of the function. [2] This is a tiny white lie, we do make a call to strnlen_user() prior to fetching the argument data. I don't like it, but due to the way the audit record is structured we really have no choice unless we copy the entire argument at once (which would require a rather wasteful allocation). The good news is that with this patch the kernel no longer relies on this strnlen_user() value for anything beyond recording it in the log, we also update it with a trustworthy value whenever possible. Reported-by:
Pengfei Wang <wpengfeinudt@gmail.com> Signed-off-by:
-
Joerg Roedel authored
commit 3254de6b upstream. Not doing so might cause IO-Page-Faults when a device uses an alias request-id and the alias-dte is left in a lower page-mode which does not cover the address allocated from the iova-allocator. Fixes: 492667da ('x86/amd-iommu: Remove amd_iommu_pd_table') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Joerg Roedel authored
commit b548e786 upstream. The default domain for a device might also be identity-mapped. In this case the kernel would crash when unity mappings are defined for the device. Fix that by making sure the domain is a dma_ops domain. Fixes: 0bb6e243 ('iommu/amd: Support IOMMU_DOMAIN_DMA type allocation') Signed-off-by:
-
Joerg Roedel authored
commit cda7005b upstream. This domain type is not yet handled in the iommu_ops->domain_free() call-back. Fix that. Fixes: 0bb6e243 ('iommu/amd: Support IOMMU_DOMAIN_DMA type allocation') Signed-off-by:
-
Wei Yang authored
commit 5c365d18 upstream. In 'commit <55d94043> ("iommu/vt-d: Get rid of domain->iommu_lock")', the error handling path is changed a little, which makes the function always return 0. This path fixes this. Signed-off-by:
Wei Yang <richard.weiyang@gmail.com> Fixes: 55d94043 ('iommu/vt-d: Get rid of domain->iommu_lock') Signed-off-by:
-
Marek Szyprowski authored
commit b54b874f upstream. Removal of IOMMU driver cannot be done reliably, so Exynos IOMMU driver doesn't support this operation. It is essential for system operation, so it makes sense to prevent unbinding by disabling bind/unbind sysfs feature for SYSMMU controller driver to avoid kernel ops or trashing memory caused by such operation. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Daniel Vetter authored
commit 78c3d5fa upstream. Another CI fail we have for no reason. Totally unjustified since nothing fails at all. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1445590806-23886-1-git-send-email-daniel.vetter@ffwll.chAcked-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Jeff Layton authored
commit dd257933 upstream. nfsd4_lock will take the st_mutex before working with the stateid it gets, but between the time when we drop the cl_lock and take the mutex, the stateid could become unhashed (a'la FREE_STATEID). If that happens the lock stateid returned to the client will be forgotten. Fix this by first moving the st_mutex acquisition into lookup_or_create_lock_state. Then, have it check to see if the lock stateid is still hashed after taking the mutex. If it's not, then put the stateid and try the find/create again. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Tested-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Chuck Lever authored
commit 42691398 upstream. When running LTP's nfslock01 test, the Linux client can send a LOCK and a FREE_STATEID request at the same time. The outcome is: Frame 324 R OPEN stateid [2,O] Frame 115004 C LOCK lockowner_is_new stateid [2,O] offset 672000 len 64 Frame 115008 R LOCK stateid [1,L] Frame 115012 C WRITE stateid [0,L] offset 672000 len 64 Frame 115016 R WRITE NFS4_OK Frame 115019 C LOCKU stateid [1,L] offset 672000 len 64 Frame 115022 R LOCKU NFS4_OK Frame 115025 C FREE_STATEID stateid [2,L] Frame 115026 C LOCK lockowner_is_new stateid [2,O] offset 672128 len 64 Frame 115029 R FREE_STATEID NFS4_OK Frame 115030 R LOCK stateid [3,L] Frame 115034 C WRITE stateid [0,L] offset 672128 len 64 Frame 115038 R WRITE NFS4ERR_BAD_STATEID In other words, the server returns stateid L in a successful LOCK reply, but it has already released it. Subsequent uses of stateid L fail. To address this, protect the generation check in nfsd4_free_stateid with the st_mutex. This should guarantee that only one of two outcomes occurs: either LOCK returns a fresh valid stateid, or FREE_STATEID returns NFS4ERR_LOCKS_HELD. Reported-by:
Chuck Lever <chuck.lever@oracle.com> Tested-by:
-
Benjamin Coddington authored
commit 149a4fdd upstream. NFS doesn't expect requests with wb_bytes set to zero and may make unexpected decisions about how to handle that request at the page IO layer. Skip request creation if we won't have any wb_bytes in the request. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
James Hogan authored
commit 9b731bcf upstream. Propagate errors from kvm_mips_handle_kseg0_tlb_fault() and kvm_mips_handle_mapped_seg_tlb_fault(), usually triggering an internal error since they normally indicate the guest accessed bad physical memory or the commpage in an unexpected way. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> [james.hogan@imgtec.com: Backport to v3.17.y - v4.4.y] Signed-off-by:
-
James Hogan authored
commit 0741f52d upstream. Two consecutive gfns are loaded into host TLB, so ensure the range check isn't off by one if guest_pmap_npages is odd. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
-
James Hogan authored
commit 8985d503 upstream. kvm_mips_handle_mapped_seg_tlb_fault() calculates the guest frame number based on the guest TLB EntryLo values, however it is not range checked to ensure it lies within the guest_pmap. If the physical memory the guest refers to is out of range then dump the guest TLB and emit an internal error. Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
-
James Hogan authored
commit c604cffa upstream. kvm_mips_handle_mapped_seg_tlb_fault() appears to map the guest page at virtual address 0 to PFN 0 if the guest has created its own mapping there. The intention is unclear, but it may have been an attempt to protect the zero page from being mapped to anything but the comm page in code paths you wouldn't expect from genuine commpage accesses (guest kernel mode cache instructions on that address, hitting trapping instructions when executing from that address with a coincidental TLB eviction during the KVM handling, and guest user mode accesses to that address). Fix this to check for mappings exactly at KVM_GUEST_COMMPAGE_ADDR (it may not be at address 0 since commit 42aa12e7 ("MIPS: KVM: Move commpage so 0x0 is unmapped")), and set the corresponding EntryLo to be interpreted as 0 (invalid). Fixes: 858dd5d4 ("KVM/MIPS32: MMU/TLB operations for the Guest.") Signed-off-by:
-
Stephan Mueller authored
commit 4b44f2d1 upstream. The Hyper-V Linux Integration Services use the VMBus implementation for communication with the Hypervisor. VMBus registers its own interrupt handler that completely bypasses the common Linux interrupt handling. This implies that the interrupt entropy collector is not triggered. This patch adds the interrupt entropy collection callback into the VMBus interrupt handler function. Signed-off-by:
Stephan Mueller <stephan.mueller@atsec.com> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
commit 9b4d0087 upstream. Since systemd is consistently using /dev/urandom before it is initialized, we can't see the other potentially dangerous users of /dev/urandom immediately after boot. So print the first ten such complaints instead. Signed-off-by:
-
Theodore Ts'o authored
commit 3371f3da upstream. If we have a hardware RNG and are using the in-kernel rngd, we should use this to initialize the non-blocking pool so that getrandom(2) doesn't block unnecessarily. Signed-off-by:
-
Pavel Shilovsky authored
commit 7893242e upstream. During following a symbolic link we received err_buf from SMB2_open(). While the validity of SMB2 error response is checked previously in smb2_check_message() a symbolic link payload is not checked at all. Fix it by adding such checks. Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Rabin Vincent authored
commit bd975d1e upstream. The secmech hmac(md5) structures are present in the TCP_Server_Info struct and can be shared among multiple CIFS sessions. However, the server mutex is not currently held when these structures are allocated and used, which can lead to a kernel crashes, as in the scenario below: mount.cifs(8) #1 mount.cifs(8) #2 Is secmech.sdeschmaccmd5 allocated? // false Is secmech.sdeschmaccmd5 allocated? // false secmech.hmacmd = crypto_alloc_shash.. secmech.sdeschmaccmd5 = kzalloc.. sdeschmaccmd5->shash.tfm = &secmec.hmacmd; secmech.sdeschmaccmd5 = kzalloc // sdeschmaccmd5->shash.tfm // not yet assigned crypto_shash_update() deref NULL sdeschmaccmd5->shash.tfm Unable to handle kernel paging request at virtual address 00000030 epc : 8027ba34 crypto_shash_update+0x38/0x158 ra : 8020f2e8 setup_ntlmv2_rsp+0x4bc/0xa84 Call Trace: crypto_shash_update+0x38/0x158 setup_ntlmv2_rsp+0x4bc/0xa84 build_ntlmssp_auth_blob+0xbc/0x34c sess_auth_rawntlmssp_authenticate+0xac/0x248 CIFS_SessSetup+0xf0/0x178 cifs_setup_session+0x4c/0x84 cifs_get_smb_ses+0x2c8/0x314 cifs_mount+0x38c/0x76c cifs_do_mount+0x98/0x440 mount_fs+0x20/0xc0 vfs_kern_mount+0x58/0x138 do_mount+0x1e8/0xccc SyS_mount+0x88/0xd4 syscall_common+0x30/0x54 Fix this by locking the srv_mutex around the code which uses these hmac(md5) structures. All the other secmech algos already have similar locking. Fixes: 95dc8dd1 ("Limit allocation of crypto mechanisms to dialect which requires") Signed-off-by:
Rabin Vincent <rabinv@axis.com> Acked-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
-
Sachin Prabhu authored
commit 8d9535b6 upstream. When opening a file with O_CREAT flag, check to see if the file opened is an existing directory. This prevents the directory from being opened which subsequently causes a crash when the close function for directories cifs_closedir() is called which frees up the file->private_data memory while the file is still listed on the open file list for the tcon. Signed-off-by:
Xiaoli Feng <xifeng@redhat.com> Signed-off-by:
-
Aurelien Aptel authored
commit a6b5058f upstream. if, when mounting //HOST/share/sub/dir/foo we can query /sub/dir/foo but not any of the path components above: - store the /sub/dir/foo prefix in the cifs super_block info - in the superblock, set root dentry to the subpath dentry (instead of the share root) - set a flag in the superblock to remember it - use prefixpath when building path from a dentry fixes bso#8950 Signed-off-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
-
Arnd Bergmann authored
commit abcfb5d9 upstream. The jbd2 journal stores the commit time in 64-bit seconds and 32-bit nanoseconds, which avoids an overflow in 2038, but it gets the numbers from current_kernel_time(), which uses 'long' seconds on 32-bit architectures. This simply changes the code to call current_kernel_time64() so we use 64-bit seconds consistently. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Vineet Gupta authored
commit 3925a16a upstream. LTP madvise05 was generating mm splat | [ARCLinux]# /sd/ltp/testcases/bin/madvise05 | BUG: Bad page map in process madvise05 pte:80e08211 pmd:9f7d4000 | page:9fdcfc90 count:1 mapcount:-1 mapping: (null) index:0x0 flags: 0x404(referenced|reserved) | page dumped because: bad pte | addr:200b8000 vm_flags:00000070 anon_vma: (null) mapping: (null) index:1005c | file: (null) fault: (null) mmap: (null) readpage: (null) | CPU: 2 PID: 6707 Comm: madvise05 And for newer kernels, the system was rendered unusable afterwards. The problem was mprotect->pte_modify() clearing PTE_SPECIAL (which is set to identify the special zero page wired to the pte). When pte was finally unmapped, special casing for zero page was not done, and instead it was treated as a "normal" page, tripping on the map counts etc. This fixes ARC STAR 9001053308 Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Dave Gerlach authored
commit d2e12e66 upstream. rproc_add adds the newly created remoteproc to a list for use by rproc_get_by_phandle and then does some additional processing to finish adding the remoteproc. This leaves a small window of time in which the rproc is available in the list but not yet fully initialized, so if another driver comes along and gets a handle to the rproc, it will be invalid. Rearrange the code in rproc_add to make sure the rproc is added to the list only after it has been successfuly initialized. Fixes: fec47d86 ("remoteproc: introduce rproc_get_by_phandle API") Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Miklos Szeredi authored
commit 76bc8e28 upstream. This does not work and does not make sense. So instead of fixing it (probably not hard) just disallow. Reported-by:
Andrei Vagin <avagin@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Roderick Colenbrander authored
commit 67f8ecc5 upstream. Many devices use userspace bluetooth stacks like BlueZ or Bluedroid in combination with uhid. If any of these stacks is used with a HID device for which the driver performs a HID request as part .probe (or technically another HID operation), this results in a deadlock situation. The deadlock results in a 5 second timeout for I/O operations in HID drivers, so isn't fatal, but none of the I/O operations have a chance of succeeding. The root cause for the problem is that uhid only allows for one request to be processed at a time per uhid instance and locks out other operations. This means that if a user space is creating a new HID device through 'UHID_CREATE', which ultimately triggers '.probe' through the HID layer. Then any HID request e.g. a read for calibration data would trigger a HID operation on uhid again, but it won't go out to userspace, because it is still stuck in UHID_CREATE. In addition bluetooth stacks are typically single threaded, so they wouldn't be able to handle any requests while waiting on uhid. Lucikly the UHID spec is somewhat flexible and allows for fixing the issue, without breaking user space. The idea which the patch implements as discussed with David Herrmann is to decouple adding of a hid device (which triggers .probe) from UHID_CREATE. The work will kick off roughly once UHID_CREATE completed (or else will wait a tiny bit of time in .probe for a lock). A HID driver has to call HID to call 'hid_hw_start()' as part of .probe once it is ready for I/O, which triggers UHID_START to user space. Any HID operations should function now within .probe and won't deadlock because userspace is stuck on UHID_CREATE. We verified this patch on Bluedroid with Android 6.0 and on desktop Linux with BlueZ stacks. Prior to the patch they had the deadlock issue. [jkosina@suse.cz: reword subject] Signed-off-by:
Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Borislav Petkov authored
commit bba14295 upstream. c44696ff ("EDAC: Remove arbitrary limit on number of channels") lifted the arbitrary limit on memory controller channels in EDAC. However, the dynamic channel attributes dynamic_csrow_dimm_attr and dynamic_csrow_ce_count_attr remained 6. This wasn't a problem except channels 6 and 7 weren't visible in sysfs on machines with more than 6 channels after the conversion to static attr groups with 2c1946b6 ("EDAC: Use static attribute groups for managing sysfs entries") [ without that, we're exploding in edac_create_sysfs_mci_device() because we're dereferencing out of the bounds of the dynamic_csrow_dimm_attr array. ] Add attributes for channels 6 and 7 along with a guard for the future, should more channels be required and/or to sanity check for misconfigured machines. We still need to check against the number of channels present on the MC first, as Thor reported. Signed-off-by:
Borislav Petkov <bp@suse.de> Reported-by:
Hironobu Ishii <ishii.hironobu@jp.fujitsu.com> Tested-by:
Thor Thayer <tthayer@opensource.altera.com> Signed-off-by:
-
Amadeusz Sławiński authored
commit 23bc6ab0 upstream. When we retrieve imtu value from userspace we should use 16 bit pointer cast instead of 32 as it's defined that way in headers. Fixes setsockopt calls on big-endian platforms. Signed-off-by:
Amadeusz Sławiński <amadeusz.slawinski@tieto.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Andy Shevchenko authored
commit 152bc19e upstream. It seems the commit e5262d05 ("spi: spi-pxa2xx: SPI support for Intel Quark X1000") misses one place to be adapted for Intel Quark, i.e. in reset_sccr1(). Clear all RFT bits when call reset_sccr1() on Intel Quark. Fixes: e5262d05 ("spi: spi-pxa2xx: SPI support for Intel Quark X1000") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Alexey Khoroshilov authored
commit 7dd91d52 upstream. There is the only failure path in efm32_i2c_probe(), where clk_disable_unprepare() is missed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Fixes: 1b5b2371 ("i2c: efm32: new bus driver") Signed-off-by:
-
Javier Martinez Canillas authored
commit 6311f126 upstream. When s5p_mfc_remove() calls put_device() for the reserved memory region devs, the driver core warns that the dev doesn't have a release callback: WARNING: CPU: 0 PID: 591 at drivers/base/core.c:251 device_release+0x8c/0x90 Device 's5p-mfc-l' does not have a release() function, it is broken and must be fixed. Also, the declared DMA memory using dma_declare_coherent_memory() isn't relased so add a dev .release that calls dma_release_declared_memory(). Fixes: 6e83e6e2 ("[media] s5p-mfc: Fix kernel warning on memory init") Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
