Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

This patch will truncate and/or ignore memory banks if their kernel
direct mappings would (partially) overlap with the vmalloc area or
the mappings between the vmalloc area and the address space top, to
prevent crashing during early boot if there happens to be more RAM
installed than we are expecting.

Since the start of the vmalloc area is not at a fixed address (but
the vmalloc end address is, via the per-platform VMALLOC_END define),
a default area of 128M is reserved for vmalloc mappings, which can
be shrunk or enlarged by passing an appropriate vmalloc= command line
option as it is done on x86.

On a board with a 3:1 user:kernel split, VMALLOC_END at 0xfe000000,
two 512M RAM banks and vmalloc=128M (the default), this patch gives:

	Truncating RAM at 20000000-3fffffff to -35ffffff (vmalloc region overlap).
	Memory: 512MB 352MB = 864MB total

On a board with a 3:1 user:kernel split, VMALLOC_END at 0xfe800000,
two 256M RAM banks and vmalloc=768M, this patch gives:

	Truncating RAM at 00000000-0fffffff to -0e7fffff (vmalloc region overlap).
	Ignoring RAM at 10000000-1fffffff (vmalloc region overlap).
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Riku Voipio <riku.voipio@iki.fi>

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

The QNAP TS-109/TS-209 and TS-409 devices need RTC_DRV_S35390A.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Enable RTC_DRV_PCF8563 in the Orion defconfig since this driver is
needed by the HP mv2120.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Enable KEYBOARD_GPIO in the Orion defconfig because a number of Orion
devices, such as the HP mv2120, define gpio-keys buttons.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

The reset button on the QNAP TS-409 is available through gpio.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Use key codes for the buttons on the TS-209/TS-409 that make more
sense than the current values.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Byron Bradley <byron.bbradley@gmail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

Export the four red SATA LEDs on the QNAP TS-409 that are connected
through gpio.  Since the boot loader apparently sets the SATA LEDs 2-4
to red and the SATA LED can only be red or green (but not both),
exporting the red SATA LEDs (which automatically turns them off upon
boot) makes the green SATA presence/activity indication visible.
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Sylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

On D0 5281 SoCs, we need to disable the wait-for-interrupt
instruction due to an erratum.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Martin Michlmayr <tbm@cyrius.com>

Update the status of the S3C24XX GPIO now we have
moved to supporting GPIOLIB
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Update SD/MMC status now that the driver is merged.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Update supported and in-progress cpu list.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Update documentation in arch/arm/plat-s3c24xx
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

s3c_lookup_cpu is only used at init time, so make
it __init.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

The cats_map_irq() function in the Simtec CATS support
code is mapping IRQ 255 (invalid IRQ) into what is a
supposedly valid interrupt numner which can cause problems
with other devices then seeing an interrupt they cannot
claim.

If the IRQ number if >= 255, then return -1 as this is not
something we can map.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Removed duplicated include file <linux/mtd/mtd.h> and <linux/mtd/partitions.h>
in arch/arm/mach-s3c2412/mach-jive.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This patch fixes compilation error if no s3c2410 processor is selected
but the s3c244x is selected. The function s3c2410_baseclk_add() is now
available for all Samsung cpus.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
[ben-linux@fluff.org: Whitespace and description fixups]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

This patch performs the equivalent include directory shuffle for
plat-orion, and fixes up all users.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ][2/2] preregister support for powernow-k8
  [CPUFREQ][1/2] whitespace fix for powernow-k8
  [CPUFREQ] Update MAINTAINERS to reflect new mailing list.
  [CPUFREQ] Fix warning in elanfreq
  [CPUFREQ] Fix -Wshadow warning in conservative governor.
  [CPUFREQ] Remove EXPERIMENTAL annotation from VIA C7 powersaver kconfig.

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] list entry can not return null
  turn cifs_setattr into a multiplexor that calls the correct function
  move file time and dos attribute setting logic into new function
  spin off cifs_setattr with unix extensions to its own function
  [CIFS] Code cleanup in old sessionsetup code
  [CIFS] cifs_mkdir and cifs_create should respect the setgid bit on parent dir
  Rename CIFSSMBSetFileTimes to CIFSSMBSetFileInfo and add PID arg
  change CIFSSMBSetTimes to CIFSSMBSetPathInfo
  [CIFS] fix trailing whitespace
  bundle up Unix SET_PATH_INFO args into a struct and change name
  Fix missing braces in cifs_revalidate()
  remove locking around tcpSesAllocCount atomic variable
  [CIFS] properly account for new user= field in SPNEGO upcall string allocation
  [CIFS] remove level of indentation from decode_negTokenInit
  [CIFS] cifs send2 not retrying enough in some cases on full socket
  [CIFS] oid should also be checked against class in cifs asn

Fix fatal multi-line kernel-doc error in list.h:
function short description must be on one line.

Error(linux-2.6.27-rc2-git3//include/linux/list.h:318): duplicate section name 'Description'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Steve French <sfrench@us.ibm.com>

This patch provides support for the _PSD ACPI object in the Powernow-k8
driver.  Although it looks like an invasive patch, most of it is
simply the consequence of turning the static acpi_performance_data
structure into a pointer.

AMD has tested it on several machines over the past few days without issue.

[trivial checkpatch warnings fixed up by davej]
[X86_POWERNOW_K8_ACPI=n buildfix from Randy Dunlap]
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Tested-by: Frank Arnold <frank.arnold@amd.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Jones <davej@redhat.com>

Trivial whitespace fix for powernow-k8.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>

Mailing list moved to vger.
Signed-off-by: Dave Jones <davej@redhat.com>

arch/x86/kernel/cpu/cpufreq/elanfreq.c:47:26: warning: symbol 'elan_multiplier' was not declared. Should it be static?

Yes, yes it should.
Signed-off-by: Dave Jones <davej@redhat.com>

drivers/cpufreq/cpufreq_conservative.c:336:15: warning: symbol 'freq_step' shadows an earlier one

Just rename the local variable.
Signed-off-by: Dave Jones <davej@redhat.com>

This has been pretty solid, and doesn't see much change at all.

Noticed by Harald Welte.
Signed-off-by: Dave Jones <davej@redhat.com>

* 'for-linus-merged' of master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5177/1: arm/mach-sa1100/Makefile: remove CONFIG_SA1100_USB
  [ARM] 5166/1: magician: add MAINTAINERS entry
  [ARM] fix pnx4008 build errors
  [ARM] Fix SMP booting with non-zero PHYS_OFFSET
  [ARM] 5185/1: Fix spi num_chipselect for lubbock
  [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
  [ARM] Add support for arch/arm/mach-*/include and arch/arm/plat-*/include
  [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
  [ARM] Eliminate useless includes of asm/mach-types.h
  [ARM] Fix circular include dependency with IRQ headers
  avr32: Use <mach/foo.h> instead of <asm/arch/foo.h>
  avr32: Introduce arch/avr32/mach-*/include/mach
  avr32: Move include/asm-avr32 to arch/avr32/include/asm
  [ARM] sa1100_wdt: use reset_status to remember watchdog reset status
  [ARM] pxa: introduce reset_status and clear_reset_status for driver's usage
  [ARM] pxa: introduce reset.h for reset specific header information

There doesn't seem to be a compelling reason why nfsd4_op_name() is
marked as "inline":

It's only used in a dprintk(), and as long as it has only one caller
non-ancient gcc versions anyway inline it automatically.

This patch fixes the following compile error with gcc 3.4:

  ...
    CC      fs/nfsd/nfs4proc.o
  nfs4proc.c: In function `nfsd4_proc_compound':
  nfs4proc.c:854: sorry, unimplemented: inlining failed in call to
  nfs4proc.c:897: sorry, unimplemented: called from here
  make[3]: *** [fs/nfsd/nfs4proc.o] Error 1
Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
[ Also made it "const char *"  - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Conflicts:

	drivers/watchdog/at91rm9200_wdt.c
	drivers/watchdog/davinci_wdt.c
	drivers/watchdog/ep93xx_wdt.c
	drivers/watchdog/ixp2000_wdt.c
	drivers/watchdog/ixp4xx_wdt.c
	drivers/watchdog/ks8695_wdt.c
	drivers/watchdog/omap_wdt.c
	drivers/watchdog/pnx4008_wdt.c
	drivers/watchdog/sa1100_wdt.c
	drivers/watchdog/wdt285.c

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (99 commits)
  pkt_sched: Fix actions referencing
  bnx2x: fix logical op
  tcp: (whitespace only) fix confusing indentation
  pkt_sched: Fix qdisc config when link is down.
  [Bluetooth] Add full quirk implementation for btusb driver
  [Bluetooth] Removal of unnecessary ignore module parameter
  [Bluetooth] Add parameters to control BNEP header compression
  ath9k: Revamp wireless mode usage
  ath9k: More unused macros
  ath9k: Remove a few unused macros and fix indentation
  ath9k: Use mac80211's band macros and remove enum hal_freq_band
  ath9k: Remove redundant data structure ath9k_txq_info
  ath9k: Cleanup data structures related to HW capabilities
  ath9k: work around gcc ICEs
  ath9k: Add new Atheros IEEE 802.11n driver
  ath5k: remove Atheros 11n devices from supported list
  list.h: add list_cut_position()
  list.h: Add list_splice_tail() and list_splice_tail_init()
  p54: swap short slot time dcf values
  rt2x00: Block all unsupported modes
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix end-of-stack checking in save_stack_trace().
  sparc: don't use asm/of_device.h
  sparc64: Use kernel/uid16.c helpers instead of own copy.
  of/sparc: remove include of linux/of_platform.h from asm/of_platform.h
  sparc: i8042-sparcio.h: fix warning

Back when .gitignore file was added to arch/powerpc/ in 06f2138e ([POWERPC]
Add files build to .gitignore, 2006-11-26), there indeed was nothing
tracked in the ignored hierarchy and ignoring everything made sense.  But
we have very many tracked files there these days, and having a higher
level .gitignore that ignores everything is asking for future troubles..

This should have been part of b8b572e1 (powerpc: Move include files to
arch/powerpc/include/asm, 2008-08-01).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch removes the commented out line for the not available
CONFIG_SA1100_USB option.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>