Add documentation for Chrome EC codec driver.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Linux 5.0-rc4

Signed-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds audio routing for both playback and capture.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds required dapm widgets for capture path.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds required dapm widgets for playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds basic controls found in wcd9335 codec.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

CLASS-H controller/Amplifier is common accorss Qualcomm WCD codec series.
This patchset adds basic CLASS-H controller apis for WCD codecs after
wcd9335 to use.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC,
It supports both I2S/I2C and SLIMbus audio interfaces.
On slimbus interface it supports two data lanes; 16 Tx ports
and 8 Rx ports. It has Seven DACs and nine dedicated interpolators,
Seven (six audio ADCs, and one VBAT ADC), Multibutton headset
control (MBHC), Active noise cancellation and Sidetone paths
and processing.

This patchset adds very basic support for playback and capture
via the 9 interpolators and ADC respectively.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch updates wcd9335 bindings with recommended properties.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add helper to override dailink platform name, if passed as parameter
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

To reuse the same machine drivers with Atom/SST, Skylake and SOF, we
need to change the default platform_name (or platforms->name in the
"modern" representation).

So far, this override was done with an automatic override, which was
broken by a set of changes for DT platforms related to deferred probe
handling.

This automatic override is actually not really needed, the machine
driver can already receive the platform name as a platform_data
parameter. This is used e.g. for HDaudio support where we have
different PCI aliases used for different platforms. We can reuse the
same mechanism and modify the machine drivers to override the dailinks
prior to registrating the card.

This will require additional work for SOF, but with this helper it'll
be just two lines of additional code per machine driver which is
reused, not the end of the world.

This helper can be simplified when all drivers have transitioned to
the "modern" representation of dailinks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

In function rt5651_i2c_probe(), local variable "ret" could
be uninitialized if function regmap_read() returns -EINVAL.
However, this value is used in if statement. This is
potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fix compilation issues reported by 0day-Kbuild with sparc64 w/ SOF.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The rationale behind the current calculation is somewhat obscure [1]
and can yield slightly wrong dividers in certain cases, which the
machine drivers for some boards (like the HiFiBerry DAC+ Pro)
seemingly try to circumvent, by updating the rate fraction so as to
suit this calculation.

The updated calculation should correctly yield the smallest bit clock
rate that would fit the frame.

[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2019-January/144219.htmlSigned-off-by: Dimitris Papavasiliou <dpapavas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Some boards, such as the HiFiBerry DAC+ Pro, use a pair of external
oscillators, to generate 44.1 or 48kHz multiples and are forced to
resort to hacks [1] in order to support 24-bit data without ending up
with fractional dividers.  This patch allows the machine driver to use
32-bit frames for 24-bit data to avoid such issues.

Although the datasheet (p. 15) seems to suggest that only a handful
of ratios are supported, it's not very explicit about it, so we allow
the full range of values supported by the underlying register in the
callback, to avoid needlessly rejecting potentially usable
configurations.

[1] http://mailman.alsa-project.org/pipermail/alsa-devel/2018-December/143442.htmlSigned-off-by: Dimitris Papavasiliou <dpapavas@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

We can use for_each_link_codecs() without waiting
for_each_rtd_codec_dai() on soc_bind_dai_link().
Let's use for_each macro.

Fixes: 50acc7e49 ("ASoC: core: Fix multi-CODEC setups")
Fixes: 10dff9b0 ("ASoC: soc-core: use for_each_link_codecs() for dai_link codecs")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch fixup build error for
commit 6a8d4198 ("ASoC: mediatek: mt6358: add codec driver")

Fixes: commit 6a8d4198 ("ASoC: mediatek: mt6358: add codec driver")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the swapped outb() parameters in the KASLR code

   - Fix the PKEY handling at fork which missed to preserve the pkey
     state for the child. Comes with a test case to validate that.

   - Fix the entry stack handling for XEN PV to respect that XEN PV
     systems enter the function already on the current thread stack and
     not on the trampoline.

   - Fix kexec load failure caused by using a stale value when the
     kexec_buf structure is reused for subsequent allocations.

   - Fix a bogus sizeof() in the memory encryption code

   - Enforce PCI dependency for the Intel Low Power Subsystem

   - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
  x86/entry/64/compat: Fix stack switching for XEN PV
  x86/kexec: Fix a kexec_file_load() failure
  x86/mm/mem_encrypt: Fix erroneous sizeof()
  x86/selftests/pkeys: Fork() to check for state being preserved
  x86/pkeys: Properly copy pkey state at fork()
  x86/kaslr: Fix incorrect i8254 outb() parameters
  x86/intel/lpss: Make PCI dependency explicit

Pull x86 timer fixes from Thomas Gleixner:
 "Two commits which were missed to be sent during the merge window.

   - The TSC calibration fix turns out to be more urgent as recent
     Skylake-X systems seem to have massive trouble with calibration
     disturbance. This should go back into stable for that reason and it
     the risk of breakage is rather low.

   - Drop an unused define"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hpet: Remove unused FSEC_PER_NSEC define
  x86/tsc: Make calibration refinement more robust

Pull timer fix from Thomas Glexiner:
 "A single regression fix to address the unintended breakage of posix
  cpu timers.

  This is caused by a new sanity check in the common code, which fails
  for posix cpu timers under certain conditions because the posix cpu
  timer code never updates the variable which is checked"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Unbreak timer rearming

Pull locking fixes from Thomas Gleixner:
 "A small series of fixes which all address possible missed wakeups:

   - Document and fix the wakeup ordering of wake_q

   - Add the missing barrier in rcuwait_wake_up(), which was documented
     in the comment but missing in the code

   - Fix the possible missed wakeups in the rwsem and futex code"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Fix (possible) missed wakeup
  futex: Fix (possible) missed wakeup
  sched/wake_q: Fix wakeup ordering for wake_q
  sched/wake_q: Document wake_q_add()
  sched/wait: Fix rcuwait_wake_up() ordering

Pull irq fixes from Thomas Gleixner:
 "A small set of fixes for the interrupt subsystem:

   - Fix a double increment in the irq descriptor allocator which
     resulted in a sanity check only being done for every second
     affinity mask

   - Add a missing device tree translation in the stm32-exti driver.
     Without that the interrupt association is completely wrong.

   - Initialize the mutex in the GIC-V3 MBI driver

   - Fix the alignment for aliasing devices in the GIC-V3-ITS driver so
     multi MSI allocations work correctly

   - Ensure that the initial affinity of a interrupt is not empty at
     startup time.

   - Drop bogus include in the madera irq chip driver

   - Fix KernelDoc regression"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size
  genirq/irqdesc: Fix double increment in alloc_descs()
  genirq: Fix the kerneldoc comment for struct irq_affinity_desc
  irqchip/madera: Drop GPIO includes
  irqchip/gic-v3-mbi: Fix uninitialized mbi_lock
  irqchip/stm32-exti: Add domain translate function
  genirq: Make sure the initial affinity is not empty

Pull EDAC fix from Borislav Petkov:
 "Fix persistent register offsets of altera_edac, from Thor Thayer"

* tag 'edac_fix_for_5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, altera: Fix S10 persistent register offset

Pull block revert from Jens Axboe:
 "Silly error snuck into a patch from the last series, let's do a revert
  to avoid a potential use-after-free"

* tag 'for-linus-20190127' of git://git.kernel.dk/linux-block:
  Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"