- 06 Oct, 2016 33 commits
-
-
Al Viro authored
[ Upstream commit acb2505d ] ... that should zero on faults. Also remove the <censored> helpful logics wrt range truncation copied from ppc32. Where it had ever been needed only in case of copy_from_user() *and* had not been merged into the mainline until a month after the need had disappeared. A decade before openrisc went into mainline, I might add... Cc: stable@vger.kernel.org Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Al Viro authored
[ Upstream commit ae7cc577 ] Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
[ Upstream commit 43403eab ] Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
[ Upstream commit e69d7005 ] Cc: stable@vger.kernel.org Signed-off-by:
-
Vineet Gupta authored
[ Upstream commit 05d9d0b9 ] Al reported potential issue with ARC get_user() as it wasn't clearing out destination pointer in case of fault due to bad address etc. Verified using following | { | u32 bogus1 = 0xdeadbeef; | u64 bogus2 = 0xdead; | int rc1, rc2; | | pr_info("Orig values %x %llx\n", bogus1, bogus2); | rc1 = get_user(bogus1, (u32 __user *)0x40000000); | rc2 = get_user(bogus2, (u64 __user *)0x50000000); | pr_info("access %d %d, new values %x %llx\n", | rc1, rc2, bogus1, bogus2); | } | [ARCLinux]# insmod /mnt/kernel-module/qtn.ko | Orig values deadbeef dead | access -14 -14, new values 0 0 Reported-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit 8ae95ed4 ] Cc: stable@vger.kernel.org Acked-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Al Viro authored
[ Upstream commit a5e541f7 ] Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
[ Upstream commit f35c1e06 ] It's -EFAULT, not -1 (and contrary to the comment in there, __strnlen_user() can return 0 - on faults). Cc: stable@vger.kernel.org Acked-by:
Richard Kuo <rkuo@codeaurora.org> Signed-off-by:
-
Al Viro authored
[ Upstream commit 3b8767a8 ] It should check access_ok(). Otherwise a bunch of places turn into trivially exploitable rootholes. Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
[ Upstream commit 9ad18b75 ] both for access_ok() failures and for faults halfway through Cc: stable@vger.kernel.org Signed-off-by:
-
Yoshinori Sato authored
[ Upstream commit a02613a4 ] Current implemantation ptr argument evaluate 2 times. It'll be an unexpected result. Changes v5: Remove unnecessary const. Changes v4: Temporary pointer type change to const void* Changes v3: Some build error fix. Changes v2: Argument x protect. Signed-off-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit ad5987b4 ] Due to an apparent copy/paste bug, the number of counters for the beacon configuration were checked twice, instead of checking the number of probe response counters. Fix this to check the number of probe response counters before parsing those. Cc: stable@vger.kernel.org Fixes: 9a774c78 ("cfg80211: Support multiple CSA counters") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Huacai Chen authored
[ Upstream commit 3cbc6fc9 ] Commit 842dfc11 ("MIPS: Fix build with binutils 2.24.51+") missing a ".set pop" in macro fpu_restore_16even, so add it. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Acked-by:
Manuel Lauss <manuel.lauss@gmail.com> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # 3.18+ Patchwork: https://patchwork.linux-mips.org/patch/14210/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Boris Brezillon authored
[ Upstream commit ebf9ff75 ] Some irqchip drivers need to take the generic chip lock outside of the irq context. Provide the irq_gc_{lock_irqsave,unlock_irqrestore}() helpers to allow one to disable irqs while entering a critical section protected by gc->lock. Note that we do not provide optimized version of these helpers for !SMP, because they are not called from the hot-path. [ tglx: Added a comment when these helpers should be [not] used ] Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable@vger.kernel.org Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Link: http://lkml.kernel.org/r/1473775109-4192-1-git-send-email-boris.brezillon@free-electrons.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Kevin Cernekee authored
[ Upstream commit 332fd7c4 ] Pass in the irq_chip_generic struct so we can use different readl/writel settings for each irqchip driver, when appropriate. Compute (gc->reg_base + reg_offset) in the helper function because this is pretty much what all callers want to do anyway. Compile-tested using the following configurations: at91_dt_defconfig (CONFIG_ATMEL_AIC_IRQ=y) sama5_defconfig (CONFIG_ATMEL_AIC5_IRQ=y) sunxi_defconfig (CONFIG_ARCH_SUNXI=y) tb10x (ARC) is untested. Signed-off-by:
Kevin Cernekee <cernekee@gmail.com> Acked-by:
Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lkml.kernel.org/r/1415342669-30640-3-git-send-email-cernekee@gmail.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Matt Redfearn authored
[ Upstream commit 951c39cd ] If the paravirt machine is compiles without CONFIG_SMP, the following linker error occurs arch/mips/kernel/head.o: In function `kernel_entry': (.ref.text+0x10): undefined reference to `smp_bootstrap' due to the kernel entry macro always including SMP startup code. Wrap this code in CONFIG_SMP to fix the error. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 3.16+ Patchwork: https://patchwork.linux-mips.org/patch/14212/Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 2db34e78 ] The AES-CTR glue code avoids calling into the blkcipher API for the tail portion of the walk, by comparing the remainder of walk.nbytes modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight into the tail processing block if they are equal. This tail processing block checks whether nbytes != 0, and does nothing otherwise. However, in case of an allocation failure in the blkcipher layer, we may enter this code with walk.nbytes == 0, while nbytes > 0. In this case, we should not dereference the source and destination pointers, since they may be NULL. So instead of checking for nbytes != 0, check for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in non-error conditions. Fixes: 49788fe2 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Cc: stable@vger.kernel.org Reported-by:
xiakaixu <xiakaixu@huawei.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit acdb04d0 ] When we need to allocate a temporary blkcipher_walk_next and it fails, the code is supposed to take the slow path of processing the data block by block. However, due to an unrelated change we instead end up dereferencing the NULL pointer. This patch fixes it by moving the unrelated bsize setting out of the way so that we enter the slow path as inteded. Fixes: 7607bd8f ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block") Cc: stable@vger.kernel.org Reported-by:
-
Daniele Palmas authored
[ Upstream commit f190fd92 ] This patch adds support for Infineon flashloader 0x8087/0x0801. The flashloader is used in Telit LE940B modem family with Telit flashing application. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Al Viro authored
[ Upstream commit 2545e5da ] ... in all cases, including the failing access_ok() Note that some architectures using asm-generic/uaccess.h have __copy_from_user() not zeroing the tail on failure halfway through. This variant works either way. Cc: stable@vger.kernel.org Signed-off-by:
-
Will Deacon authored
[ Upstream commit 872c63fb ] smp_mb__before_spinlock() is intended to upgrade a spin_lock() operation to a full barrier, such that prior stores are ordered with respect to loads and stores occuring inside the critical section. Unfortunately, the core code defines the barrier as smp_wmb(), which is insufficient to provide the required ordering guarantees when used in conjunction with our load-acquire-based spinlock implementation. This patch overrides the arm64 definition of smp_mb__before_spinlock() to map to a full smp_mb(). Cc: <stable@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Reported-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
[ Upstream commit 293f2936 ] On arm/arm64, we depend on the kvm_unmap_hva* callbacks (via mmu_notifiers::invalidate_*) to unmap the stage2 pagetables when the userspace buffer gets unmapped. However, when the Hypervisor process exits without explicit unmap of the guest buffers, the only notifier we get is kvm_arch_flush_shadow_all() (via mmu_notifier::release ) which does nothing on arm. Later this causes us to access pages that were already released [via exit_mmap() -> unmap_vmas()] when we actually get to unmap the stage2 pagetable [via kvm_arch_destroy_vm() -> kvm_free_stage2_pgd()]. This triggers crashes with CONFIG_DEBUG_PAGEALLOC, which unmaps any free'd pages from the linear map. [ 757.644120] Unable to handle kernel paging request at virtual address ffff800661e00000 [ 757.652046] pgd = ffff20000b1a2000 [ 757.655471] [ffff800661e00000] *pgd=00000047fffe3003, *pud=00000047fcd8c003, *pmd=00000047fcc7c003, *pte=00e8004661e00712 [ 757.666492] Internal error: Oops: 96000147 [#3] PREEMPT SMP [ 757.672041] Modules linked in: [ 757.675100] CPU: 7 PID: 3630 Comm: qemu-system-aar Tainted: G D 4.8.0-rc1 #3 [ 757.683240] Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.15 Aug 19 2016 [ 757.692938] task: ffff80069cdd3580 task.stack: ffff8006adb7c000 [ 757.698840] PC is at __flush_dcache_area+0x1c/0x40 [ 757.703613] LR is at kvm_flush_dcache_pmd+0x60/0x70 [ 757.708469] pc : [<ffff20000809dbdc>] lr : [<ffff2000080b4a70>] pstate: 20000145 ... [ 758.357249] [<ffff20000809dbdc>] __flush_dcache_area+0x1c/0x40 [ 758.363059] [<ffff2000080b6748>] unmap_stage2_range+0x458/0x5f0 [ 758.368954] [<ffff2000080b708c>] kvm_free_stage2_pgd+0x34/0x60 [ 758.374761] [<ffff2000080b2280>] kvm_arch_destroy_vm+0x20/0x68 [ 758.380570] [<ffff2000080aa330>] kvm_put_kvm+0x210/0x358 [ 758.385860] [<ffff2000080aa524>] kvm_vm_release+0x2c/0x40 [ 758.391239] [<ffff2000082ad234>] __fput+0x114/0x2e8 [ 758.396096] [<ffff2000082ad46c>] ____fput+0xc/0x18 [ 758.400869] [<ffff200008104658>] task_work_run+0x108/0x138 [ 758.406332] [<ffff2000080dc8ec>] do_exit+0x48c/0x10e8 [ 758.411363] [<ffff2000080dd5fc>] do_group_exit+0x6c/0x130 [ 758.416739] [<ffff2000080ed924>] get_signal+0x284/0xa18 [ 758.421943] [<ffff20000808a098>] do_signal+0x158/0x860 [ 758.427060] [<ffff20000808aad4>] do_notify_resume+0x6c/0x88 [ 758.432608] [<ffff200008083624>] work_pending+0x10/0x14 [ 758.437812] Code: 9ac32042 8b010001 d1000443 8a230000 (d50b7e20) This patch fixes the issue by moving the kvm_free_stage2_pgd() to kvm_arch_flush_shadow_all(). Cc: <stable@vger.kernel.org> # 3.9+ Tested-by:
Itaru Kitayama <itaru.kitayama@riken.jp> Reported-by:
James Morse <james.morse@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 9f8a7658 ] When a user timer instance is continued without the explicit start beforehand, the system gets eventually zero-division error like: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88003c9b2280 task.stack: ffff880027280000 RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195 RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62 Call Trace: <IRQ> [< inline >] __run_hrtimer kernel/time/hrtimer.c:1238 [<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302 [<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336 [<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933 [<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957 [<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487 <EOI> ..... Although a similar issue was spotted and a fix patch was merged in commit [6b760bb2: ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of iceberg. In this patch, we fix the issue a bit more drastically. Basically the continue of an uninitialized timer is supposed to be a fresh start, so we do it for user timers. For the direct snd_timer_continue() call, there is no way to pass the initial tick value, so we kick out for the uninitialized case. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit f65e0d29 ] snd_timer_notify1() is called outside the spinlock and it retakes the lock after the unlock. This is rather racy, and it's safer to move snd_timer_notify() call inside the main spinlock. The patch also contains a slight refactoring / cleanup of the code. Now all start/stop/continue/pause look more symmetric and a bit better readable. Signed-off-by:
-
Mathias Nyman authored
[ Upstream commit bcf42aa6 ] The stop endpoint command has its own 5 second timeout timer. If the timeout function is triggered between USB3 and USB2 host removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd) the ->primary_hcd will be set to NULL at USB3 hcd removal. Fix this by first checking if the PCI host is being removed, and also by using only xhci_to_hcd() as it will always return the primary hcd. CC: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit f077aaf0 ] In commit c60ac569 ("powerpc: Update kernel VSID range", 2013-03-13) we lost a check on the region number (the top four bits of the effective address) for addresses below PAGE_OFFSET. That commit replaced a check that the top 18 bits were all zero with a check that bits 46 - 59 were zero (performed for all addresses, not just user addresses). This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx and we will insert a valid SLB entry for it. The VSID used will be the same as if the top 4 bits were 0, but the page size will be some random value obtained by indexing beyond the end of the mm_ctx_high_slices_psize array in the paca. If that page size is the same as would be used for region 0, then userspace just has an alias of the region 0 space. If the page size is different, then no HPTE will be found for the access, and the process will get a SIGSEGV (since hash_page_mm() will refuse to create a HPTE for the bogus address). The access beyond the end of the mm_ctx_high_slices_psize can be at most 5.5MB past the array, and so will be in RAM somewhere. Since the access is a load performed in real mode, it won't fault or crash the kernel. At most this bug could perhaps leak a little bit of information about blocks of 32 bytes of memory located at offsets of i * 512kB past the paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11. Fixes: c60ac569 ("powerpc: Update kernel VSID range") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 0bd22235 ] When calling .import() on a cryptd ahash_request, the structure members that describe the child transform in the shash_desc need to be initialized like they are when calling .init() Cc: stable@vger.kernel.org Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 751eb6b6 ] In general, when DAD detected IPv6 duplicate address, ifp->state will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a delayed work, the call tree should be like this: ndisc_recv_ns -> addrconf_dad_failure <- missing ifp put -> addrconf_mod_dad_work -> schedule addrconf_dad_work() -> addrconf_dad_stop() <- missing ifp hold before call it addrconf_dad_failure() called with ifp refcont holding but not put. addrconf_dad_work() call addrconf_dad_stop() without extra holding refcount. This will not cause any issue normally. But the race between addrconf_dad_failure() and addrconf_dad_work() may cause ifp refcount leak and netdevice can not be unregister, dmesg show the following messages: IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected! ... unregister_netdevice: waiting for eth0 to become free. Usage count = 1 Cc: stable@vger.kernel.org Fixes: c15b1cca ("ipv6: move DAD and addrconf_verify processing to workqueue") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Chris Mason authored
[ Upstream commit cbd60aa7 ] We use a btrfs_log_ctx structure to pass information into the tree log commit, and get error values out. It gets added to a per log-transaction list which we walk when things go bad. Commit d1433deb added an optimization to skip waiting for the log commit, but didn't take root_log_ctx out of the list. This patch makes sure we remove things before exiting. Signed-off-by:
Chris Mason <clm@fb.com> Fixes: d1433deb cc: stable@vger.kernel.org # 3.15+ Signed-off-by:
-
Forrest Liu authored
[ Upstream commit 3da5ab56 ] Add missing blk_finish_plug in btrfs_sync_log() Signed-off-by:
Forrest Liu <forrestl@synology.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit 519d8bd4 ] The previous driver is possible to stop the transfer wrongly. For example: 1) An interrupt happens, but not BRDY interruption. 2) Read INTSTS0. And than state->intsts0 is not set to BRDY. 3) BRDY is set to 1 here. 4) Read BRDYSTS. 5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly. Remarks: - The INTSTS0.BRDY is read only. - If any bits of BRDYSTS are set to 1, the BRDY is set to 1. - If BRDYSTS is 0, the BRDY is set to 0. So, this patch adds condition to avoid such situation. (And about NRDYSTS, this is not used for now. But, avoiding any side effects, this patch doesn't touch it.) Fixes: d5c6a1e0 ("usb: renesas_usbhs: fixup interrupt status clear method") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Balbir Singh authored
[ Upstream commit 135e8c92 ] The origin of the issue I've seen is related to a missing memory barrier between check for task->state and the check for task->on_rq. The task being woken up is already awake from a schedule() and is doing the following: do { schedule() set_current_state(TASK_(UN)INTERRUPTIBLE); } while (!cond); The waker, actually gets stuck doing the following in try_to_wake_up(): while (p->on_cpu) cpu_relax(); Analysis: The instance I've seen involves the following race: CPU1 CPU2 while () { if (cond) break; do { schedule(); set_current_state(TASK_UN..) } while (!cond); wakeup_routine() spin_lock_irqsave(wait_lock) raw_spin_lock_irqsave(wait_lock) wake_up_process() } try_to_wake_up() set_current_state(TASK_RUNNING); .. list_del(&waiter.list); CPU2 wakes up CPU1, but before it can get the wait_lock and set current state to TASK_RUNNING the following occurs: CPU3 wakeup_routine() raw_spin_lock_irqsave(wait_lock) if (!list_empty) wake_up_process() try_to_wake_up() raw_spin_lock_irqsave(p->pi_lock) .. if (p->on_rq && ttwu_wakeup()) .. while (p->on_cpu) cpu_relax() .. CPU3 tries to wake up the task on CPU1 again since it finds it on the wait_queue, CPU1 is spinning on wait_lock, but immediately after CPU2, CPU3 got it. CPU3 checks the state of p on CPU1, it is TASK_UNINTERRUPTIBLE and the task is spinning on the wait_lock. Interestingly since p->on_rq is checked under pi_lock, I've noticed that try_to_wake_up() finds p->on_rq to be 0. This was the most confusing bit of the analysis, but p->on_rq is changed under runqueue lock, rq_lock, the p->on_rq check is not reliable without this fix IMHO. The race is visible (based on the analysis) only when ttwu_queue() does a remote wakeup via ttwu_queue_remote. In which case the p->on_rq change is not done uder the pi_lock. The result is that after a while the entire system locks up on the raw_spin_irqlock_save(wait_lock) and the holder spins infintely Reproduction of the issue: The issue can be reproduced after a long run on my system with 80 threads and having to tweak available memory to very low and running memory stress-ng mmapfork test. It usually takes a long time to reproduce. I am trying to work on a test case that can reproduce the issue faster, but thats work in progress. I am still testing the changes on my still in a loop and the tests seem OK thus far. Big thanks to Benjamin and Nick for helping debug this as well. Ben helped catch the missing barrier, Nick caught every missing bit in my theory. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> [ Updated comment to clarify matching barriers. Many architectures do not have a full barrier in switch_to() so that cannot be relied upon. ] Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <nicholas.piggin@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/e02cce7b-d9ca-1ad0-7a61-ea97c7582b37@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 307fe9dd ] All the scaling of the KXSD9 involves multiplication with a fraction number < 1. However the scaling value returned from IIO_INFO_SCALE was unpredictable as only the micros of the value was assigned, and not the integer part, resulting in scaling like this: $cat in_accel_scale -1057462640.011978 Fix this by assigning zero to the integer part. Cc: stable@vger.kernel.org Tested-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 04 Oct, 2016 7 commits
-
-
Takashi Sakamoto authored
[ Upstream commit 6b1ca4bc ] In hwdep interface of fireworks driver, accessing to user space is in a critical section with disabled local interrupt. Depending on architecture, accessing to user space can cause page fault exception. Then local processor stores machine status and handles the synchronous event. A handler corresponding to the event can call task scheduler to wait for preparing pages. In a case of usage of single core processor, the state to disable local interrupt is worse because it don't handle usual interrupts from hardware. This commit fixes this bug, performing the accessing outside spinlock. This commit also gives up counting the number of queued response messages to simplify ring-buffer management. Reported-by:
Vaishali Thakkar <vaishali.thakkar@oracle.com> Cc: stable@vger.kernel.org Fixes: 555e8a8f('ALSA: fireworks: Add command/response functionality into hwdep interface') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 8aade778 ] i.MX6SX has bypass PMIC ready function, as this function is normally NOT enabled on the board design, so we need to bypass the PMIC ready pin check during DSM mode resume flow, otherwise, the internal DSM resume logic will be waiting for this signal to be ready forever and cause resume fail. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Fixes: ff843d62 ("ARM: imx: add suspend support for i.mx6sx") Cc: <stable@vger.kernel.org> Tested-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Ken Lin authored
[ Upstream commit 83d9956b ] Avoid getting sample rate on B850V3 CP2114 as it is unsupported and causes noisy "current rate is different from the runtime rate" messages when playback starts. Signed-off-by:
Ken Lin <ken.lin@advantech.com.tw> Signed-off-by:
Akshay Bhat <akshay.bhat@timesys.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit 8ddc0563 ] I hit this with syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #190 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff88011278d600 task.stack: ffff8801120c0000 RIP: 0010:[<ffffffff82c8ba07>] [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP: 0018:ffff8801120c7a60 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000007 RDX: 0000000000000009 RSI: 1ffff10023483091 RDI: 0000000000000048 RBP: ffff8801120c7a78 R08: ffff88011a5cf768 R09: ffff88011a5ba790 R10: 0000000000000002 R11: ffffed00234b9ef1 R12: ffff880114843980 R13: ffffffff84213c00 R14: ffff880114843ab0 R15: 0000000000000286 FS: 00007f72958f3700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 00000001126ab000 CR4: 00000000000006f0 Stack: ffff880114843980 ffff880111eb2dc0 ffff880114843a34 ffff8801120c7ad0 ffffffff82c81ab1 0000000000000000 ffffffff842138e0 0000000100000000 ffff880111eb2dd0 ffff880111eb2dc0 0000000000000001 ffff880111eb2dc0 Call Trace: [<ffffffff82c81ab1>] snd_timer_start1+0x331/0x670 [<ffffffff82c85bfd>] snd_timer_start+0x5d/0xa0 [<ffffffff82c8795e>] snd_timer_user_ioctl+0x88e/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff8132762f>] ? put_prev_entity+0x108f/0x21a0 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff813510af>] ? cpuacct_account_field+0x12f/0x1a0 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: c7 c7 c4 b9 c8 82 48 89 d9 4c 89 ee e8 63 88 7f fe e8 7e 46 7b fe 48 8d 7b 48 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 84 c0 7e 65 80 7b 48 00 74 0e e8 52 46 RIP [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP <ffff8801120c7a60> ---[ end trace 5955b08db7f2b029 ]--- This can happen if snd_hrtimer_open() fails to allocate memory and returns an error, which is currently not checked by snd_timer_open(): ioctl(SNDRV_TIMER_IOCTL_SELECT) - snd_timer_user_tselect() - snd_timer_close() - snd_hrtimer_close() - (struct snd_timer *) t->private_data = NULL - snd_timer_open() - snd_hrtimer_open() - kzalloc() fails; t->private_data is still NULL ioctl(SNDRV_TIMER_IOCTL_START) - snd_timer_user_start() - snd_timer_start() - snd_timer_start1() - snd_hrtimer_start() - t->private_data == NULL // boom Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit 6b760bb2 ] I got this: divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff8801120a9580 task.stack: ffff8801120b0000 RIP: 0010:[<ffffffff82c8bd9a>] [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP: 0018:ffff88011aa87da8 EFLAGS: 00010006 RAX: 0000000000004f76 RBX: ffff880112655e88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880112655ea0 RDI: 0000000000000001 RBP: ffff88011aa87e00 R08: ffff88013fff905c R09: ffff88013fff9048 R10: ffff88013fff9050 R11: 00000001050a7b8c R12: ffff880114778a00 R13: ffff880114778ab4 R14: ffff880114778b30 R15: 0000000000000000 FS: 00007f071647c700(0000) GS:ffff88011aa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 0000000112021000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff880114778ab8 ffff880112655ea0 0000000000004f76 ffff880112655ec8 ffff880112655e80 ffff880112655e88 ffff88011aa98fc0 00000000b97ccf2b dffffc0000000000 ffff88011aa98fc0 ffff88011aa87ef0 Call Trace: <IRQ> [<ffffffff813abce7>] __hrtimer_run_queues+0x347/0xa00 [<ffffffff82c8bbc0>] ? snd_hrtimer_close+0x130/0x130 [<ffffffff813ab9a0>] ? retrigger_next_event+0x1b0/0x1b0 [<ffffffff813ae1a6>] ? hrtimer_interrupt+0x136/0x4b0 [<ffffffff813ae220>] hrtimer_interrupt+0x1b0/0x4b0 [<ffffffff8120f91e>] local_apic_timer_interrupt+0x6e/0xf0 [<ffffffff81227ad3>] ? kvm_guest_apic_eoi_write+0x13/0xc0 [<ffffffff83c35086>] smp_apic_timer_interrupt+0x76/0xa0 [<ffffffff83c3416c>] apic_timer_interrupt+0x8c/0xa0 <EOI> [<ffffffff83c3239c>] ? _raw_spin_unlock_irqrestore+0x2c/0x60 [<ffffffff82c8185d>] snd_timer_start1+0xdd/0x670 [<ffffffff82c87015>] snd_timer_continue+0x45/0x80 [<ffffffff82c88100>] snd_timer_user_ioctl+0x1030/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff815aa4f8>] ? handle_mm_fault+0xbc8/0x27f0 [<ffffffff815a9930>] ? __pmd_alloc+0x370/0x370 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: e8 fc 42 7b fe 8b 0d 06 8a 50 03 49 0f af cf 48 85 c9 0f 88 7c 01 00 00 48 89 4d a8 e8 e0 42 7b fe 48 8b 45 c0 48 8b 4d a8 48 99 <48> f7 f9 49 01 c7 e8 cb 42 7b fe 48 8b 55 d0 48 b8 00 00 00 00 RIP [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP <ffff88011aa87da8> ---[ end trace 6aa380f756a21074 ]--- The problem happens when you call ioctl(SNDRV_TIMER_IOCTL_CONTINUE) on a completely new/unused timer -- it will have ->sticks == 0, which causes a divide by 0 in snd_hrtimer_callback(). Signed-off-by:
-
Simon Baatz authored
[ Upstream commit a7789378 ] Commit 148c274e ("ARM: kirkwood: ib62x0: add u-boot environment partition") split the "u-boot" partition into "u-boot" and "u-boot environment". However, instead of the size of the environment, an offset was given, resulting in overlapping partitions. Signed-off-by:
Simon Baatz <gmbnomis@gmail.com> Fixes: 148c274e ("ARM: kirkwood: ib62x0: add u-boot environment partition") Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Luka Perkov <luka@openwrt.org> Cc: stable@vger.kernel.org # 3.13+ Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Pawel Moll authored
[ Upstream commit b928466b ] The code setting XP watchpoint comparator and mask registers should, in order to be fully compliant with specification, zero one or more most significant bits of each field. In both L cases it means zeroing bit 63. The bitmask doing this was wrong, though, zeroing bit 60 instead. Fortunately, due to a lucky coincidence, this turned out to be fairly innocent with the existing hardware. Fixed now. Cc: stable@vger.kernel.org # 3.17+ Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
-
