- 06 Aug, 2012 8 commits
-
-
Jaganath Kanakkassery authored
If l2cap_chan_create() fails then it will return from l2cap_sock_kill since zapped flag of sk is reset. Signed-off-by:
Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Andrei Emeltchenko authored
smp_chan_create might return NULL so we need to check before dereferencing smp. Signed-off-by:
Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by:
-
Ram Malovany authored
When the name of the given entry is empty , the state needs to be updated accordingly. Cc: stable@vger.kernel.org Signed-off-by:
Ram Malovany <ramm@ti.com> Signed-off-by:
-
Ram Malovany authored
If the device was not found in a list of found devices names of which are pending.This may happen in a case when HCI Remote Name Request was sent as a part of incoming connection establishment procedure. Hence there is no need to continue resolving a next name as it will be done upon receiving another Remote Name Request Complete Event. This will fix a kernel crash when trying to use this entry to resolve the next name. Cc: stable@vger.kernel.org Signed-off-by:
-
Ram Malovany authored
If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not resolve the name.This will fix a kernel crash when trying to use NULL pointer. Cc: stable@vger.kernel.org Signed-off-by:
-
Szymon Janc authored
Some devices e.g. some Android based phones don't do SDP search before pairing and cancel legacy pairing when ACL is disconnected. PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT is only received after remote user entered PIN. In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT (2 seconds) is being used to timeout ACL connection. This results in problems with legacy pairing as remote user has only few seconds to enter PIN before ACL is disconnected. Increase disconnect timeout for incomming connection to HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists. To avoid keeping ACL alive for too long after SDP search set ACL timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected. 2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8 status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01 Role: Slave 2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00 2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 42 2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:02:72:D6:6A:3F mode 0 2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3 handle 42 slots 5 2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0 2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 1 2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 42 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 42 page 1 2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 42 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000 2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0' 2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 42 2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3 status 0x13 handle 42 Error: Remote User Terminated Connection 2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 42 reason 0x13 Reason: Remote User Terminated Connection Cc: stable@vger.kernel.org Signed-off-by:Szymon Janc <szymon.janc@tieto.com> Acked-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Gustavo Padovan authored
sco_chan_del() only has conn != NULL when called from sco_conn_del() so just move the code from it that deal with conn to sco_conn_del(). [ 120.765529] [ 120.765529] ====================================================== [ 120.766529] [ INFO: possible circular locking dependency detected ] [ 120.766529] 3.5.0-rc1-10292-g3701f944-dirty #70 Tainted: G W [ 120.766529] ------------------------------------------------------- [ 120.766529] kworker/u:3/1497 is trying to acquire lock: [ 120.766529] (&(&conn->lock)->rlock#2){+.+...}, at: [<ffffffffa00b7ecc>] sco_chan_del+0x4c/0x170 [bluetooth] [ 120.766529] [ 120.766529] but task is already holding lock: [ 120.766529] (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}, at: [<ffffffffa00b8401>] sco_conn_del+0x61/0xe0 [bluetooth] [ 120.766529] [ 120.766529] which lock already depends on the new lock. [ 120.766529] [ 120.766529] [ 120.766529] the existing dependency chain (in reverse order) is: [ 120.766529] [ 120.766529] -> #1 (slock-AF_BLUETOOTH-BTPROTO_SCO){+.+...}: [ 120.766529] [<ffffffff8107980e>] lock_acquire+0x8e/0xb0 [ 120.766529] [<ffffffff813c19e0>] _raw_spin_lock+0x40/0x80 [ 120.766529] [<ffffffffa00b85e9>] sco_connect_cfm+0x79/0x300 [bluetooth] [ 120.766529] [<ffffffffa0094b13>] hci_sync_conn_complete_evt.isra.90+0x343/0x400 [bluetooth] [ 120.766529] [<ffffffffa009d447>] hci_event_packet+0x317/0xfb0 [bluetooth] [ 120.766529] [<ffffffffa008aa68>] hci_rx_work+0x2c8/0x890 [bluetooth] [ 120.766529] [<ffffffff81047db7>] process_one_work+0x197/0x460 [ 120.766529] [<ffffffff810489d6>] worker_thread+0x126/0x2d0 [ 120.766529] [<ffffffff8104ee4d>] kthread+0x9d/0xb0 [ 120.766529] [<ffffffff813c4294>] kernel_thread_helper+0x4/0x10 [ 120.766529] [ 120.766529] -> #0 (&(&conn->lock)->rlock#2){+.+...}: [ 120.766529] [<ffffffff81078a8a>] __lock_acquire+0x154a/0x1d30 [ 120.766529] [<ffffffff8107980e>] lock_acquire+0x8e/0xb0 [ 120.766529] [<ffffffff813c19e0>] _raw_spin_lock+0x40/0x80 [ 120.766529] [<ffffffffa00b7ecc>] sco_chan_del+0x4c/0x170 [bluetooth] [ 120.766529] [<ffffffffa00b8414>] sco_conn_del+0x74/0xe0 [bluetooth] [ 120.766529] [<ffffffffa00b88a2>] sco_disconn_cfm+0x32/0x60 [bluetooth] [ 120.766529] [<ffffffffa0093a82>] hci_disconn_complete_evt.isra.53+0x242/0x390 [bluetooth] [ 120.766529] [<ffffffffa009d747>] hci_event_packet+0x617/0xfb0 [bluetooth] [ 120.766529] [<ffffffffa008aa68>] hci_rx_work+0x2c8/0x890 [bluetooth] [ 120.766529] [<ffffffff81047db7>] process_one_work+0x197/0x460 [ 120.766529] [<ffffffff810489d6>] worker_thread+0x126/0x2d0 [ 120.766529] [<ffffffff8104ee4d>] kthread+0x9d/0xb0 [ 120.766529] [<ffffffff813c4294>] kernel_thread_helper+0x4/0x10 [ 120.766529] [ 120.766529] other info that might help us debug this: [ 120.766529] [ 120.766529] Possible unsafe locking scenario: [ 120.766529] [ 120.766529] CPU0 CPU1 [ 120.766529] ---- ---- [ 120.766529] lock(slock-AF_BLUETOOTH-BTPROTO_SCO); [ 120.766529] lock(&(&conn->lock)->rlock#2); [ 120.766529] lock(slock-AF_BLUETOOTH-BTPROTO_SCO); [ 120.766529] lock(&(&conn->lock)->rlock#2); [ 120.766529] [ 120.766529] *** DEADLOCK *** Signed-off-by:
-
Manoj Iyer authored
Patch adds support for BCM20702A0 device id (0a5c:21f4). usb-devices after patch was applied: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f4 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DF154D6 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) usb-devices before patch was applied: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21f4 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DF154D6 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Manoj Iyer <manoj.iyer@canonical.com> Tested-by:
Chris Gagnon <chris.gagnon@canonical.com> Signed-off-by:
-
- 03 Aug, 2012 1 commit
-
-
Mohammed Shafi Shajakhan authored
AR1111 is same as AR9485. The h/w difference between them is quite insignificant, Felix suggests only very few baseband features may not be available in AR1111. The h/w code for AR9485 is already present, so AR1111 should work fine with the addition of its PID/VID. Cc: stable@vger.kernel.org [2.6.39+] Cc: Felix Bitterli <felixb@qca.qualcomm.com> Reported-by:
Tim Bentley <Tim.Bentley@Gmail.com> Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Tested-by:
John W. Linville <linville@tuxdriver.com>
-
- 02 Aug, 2012 15 commits
-
-
Seth Forshee authored
brcmsmac cannot call freq_reg_info() during channel changes as it does not hold cfg80211_lock, and as a result it generates a lockdep warning. freq_reg_info() is being used to determine whether OFDM is allowed on the current channel, so we can avoid the errant call by using the new IEEE80211_CHAN_NO_OFDM for this purpose instead. Reported-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Daniel Drake authored
The if_sdio_card structure was never being freed, and neither was the command structure used for association. Signed-off-by:
Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Woody Hung authored
This patch is going to fix the resuming failed from S3/S4 for rt3290 chip. Signed-off-by:
Woody Hung <Woody.Hung@mediatek.com> Cc: Kevin Chou <kevin.chou@mediatek.com> Signed-off-by:
Chen, Chien-Chia <machen@suse.com> Reviewed-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Daniel Drake authored
On an OLPC XO-1.5 we have seen the following situation: - the system starts going into suspend - no wake params are set, so the mmc layer removes the card - during remove, we send a command to the card - that command fails, causing if_sdio's reset method to try and remove the mmc card in attempt to reset it - the mmc layer is not happy about being asked to remove a card that it is already removing, and the kernel crashes While the MMC layer could possibly be taught to behave better here, it also seems sensible for libertas not to try and reset a card if we're in the process of removing it anyway. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Rafał Miłecki authored
Add some comments by the way Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
-
Paul Stewart authored
Restore the default state to the "beacon_found" flag when the channel flags are restored. Otherwise, we can end up with a channel that we can no longer transmit on even when we can see beacons on that channel. Signed-off-by:
Paul Stewart <pstew@chromium.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Seth Forshee authored
Currently the only way for wireless drivers to tell whether or not OFDM is allowed on the current channel is to check the regulatory information. However, this requires hodling cfg80211_mutex, which is not visible to the drivers. Other regulatory restrictions are provided as flags in the channel definition, so let's do similarly with OFDM. This patch adds a new flag, IEEE80211_CHAN_NO_OFDM, to tell drivers that OFDM on a channel is not allowed. This flag is set on any channels for which regulatory indicates that OFDM is prohibited. Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
Remove unused includes after IP cache removal Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesper Juhl authored
In bnx2x_mcast_enqueue_cmd() we'll leak the memory allocated to 'new_cmd' if we hit the deafault case of the 'switch (cmd)'. Add a 'kfree(new_cmd)' to that case to avoid the leak. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
-
Fan Du authored
After SA is setup, one timer is armed to detect soft/hard expiration, however the timer handler uses xtime to do the math. This makes hard expiration occurs first before soft expiration after setting new date with big interval. As a result new child SA is deleted before rekeying the new one. Signed-off-by:
Fan Du <fdu@windriver.com> Signed-off-by:
-
Ben Hutchings authored
Cache the device gso_max_segs in sock::sk_gso_max_segs and use it to limit the size of TSO skbs. This avoids the need to fall back to software GSO for local TCP senders. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Ben Hutchings authored
Currently an skb requiring TSO may not fit within a minimum-size TX queue. The TX queue selected for the skb may stall and trigger the TX watchdog repeatedly (since the problem skb will be retried after the TX reset). This issue is designated as CVE-2012-3412. Set the maximum number of TSO segments for our devices to 100. This should make no difference to behaviour unless the actual MSS is less than about 700. Increase the minimum TX queue size accordingly to allow for 2 worst-case skbs, so that there will definitely be space to add an skb after we wake a queue. To avoid invalidating existing configurations, change efx_ethtool_set_ringparam() to fix up values that are too small rather than returning -EINVAL. Signed-off-by:
-
Ben Hutchings authored
A peer (or local user) may cause TCP to use a nominal MSS of as little as 88 (actual MSS of 76 with timestamps). Given that we have a sufficiently prodigious local sender and the peer ACKs quickly enough, it is nevertheless possible to grow the window for such a connection to the point that we will try to send just under 64K at once. This results in a single skb that expands to 861 segments. In some drivers with TSO support, such an skb will require hundreds of DMA descriptors; a substantial fraction of a TX ring or even more than a full ring. The TX queue selected for the skb may stall and trigger the TX watchdog repeatedly (since the problem skb will be retried after the TX reset). This particularly affects sfc, for which the issue is designated as CVE-2012-3412. Therefore: 1. Add the field net_device::gso_max_segs holding the device-specific limit. 2. In netif_skb_features(), if the number of segments is too high then mask out GSO features to force fall back to software GSO. Signed-off-by:
-
- 01 Aug, 2012 16 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "The lion share of this pull request are fixes for clk-related breakage caused by other changes during this merge window. For some platforms the fix was as simple as selecting HAVE_CLK, for others like the Loongson 2 significant restructuring was required. The remainder are changes required to get the Lantiq code to work again." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Loongson 2: Sort out clock managment. MIPS: Loongson 1: more clk support and add select HAVE_CLK MIPS: txx9: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: BCM63xx: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: AR7: Fix redefinition of clk_* by adding select HAVE_CLK MIPS: Lantiq: Platform specific CLK fixup MIPS: Lantiq: Add device_tree_init function MIPS: Lantiq: Fix interface clock and PCI control register offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML fixes from Richard Weinberger: "This patch set contains mostly fixes and cleanups. The UML tty driver uses now tty_port and is no longer broken like hell :-)" * 'for-linus-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add arch/x86/um to MAINTAINERS um: pass siginfo to guest process um: fix ubd_file_size for read-only files um: pull interrupt_end() into userspace() um: split syscall_trace(), pass pt_regs to it um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs um: set BLK_CGROUP=y in defconfig um: remove count_lock um: fully use tty_port um: Remove dead code um: remove line_ioctl() TTY: um/line, use tty from tty_port TTY: um/line, add tty_port
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ... -
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM audit/signal updates from Russell King: "ARM audit/signal handling updates from Al and Will. This improves on the work Viro did last merge window, and sorts out some of the issues found with that work." * 'audit' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7475/1: sys_trace: allow all syscall arguments to be updated via ptrace ARM: 7474/1: get rid of TIF_SYSCALL_RESTARTSYS ARM: 7473/1: deal with handlerless restarts without leaving the kernel ARM: 7472/1: pull all work_pending logics into C function ARM: 7471/1: Revert "7442/1: Revert "remove unused restart trampoline"" ARM: 7470/1: Revert "7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK""
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "This fixes various issues found during July" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7479/1: mm: avoid NULL dereference when flushing gate_vma with VIVT caches ARM: Fix undefined instruction exception handling ARM: 7480/1: only call smp_send_stop() on SMP ARM: 7478/1: errata: extend workaround for erratum #720789 ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UP ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspend ARM: 7468/1: ftrace: Trace function entry before updating index ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+ ARM: 7466/1: disable interrupt before spinning endlessly ARM: 7465/1: Handle >4GB memory sizes in device tree and mem=size@start option
-
Richard Weinberger authored
Signed-off-by:Richard Weinberger <richard@nod.at>
-
Martin Pärtel authored
UML guest processes now get correct siginfo_t for SIGTRAP, SIGFPE, SIGILL and SIGBUS. Specifically, si_addr and si_code are now correct where previously they were si_addr = NULL and si_code = 128. Signed-off-by:
Martin Pärtel <martin.partel@gmail.com> Signed-off-by:
-
Martin Pärtel authored
Made ubd_file_size not request write access. Fixes use of read-only images. Signed-off-by:
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Johannes Berg authored
The mesh path timer needs to be canceled when leaving the mesh as otherwise it could fire after the interface has been removed already. Cc: stable@vger.kernel.org Signed-off-by: -
Johannes Berg authored
There's a corner case that can happen when we suspend with a timer running, then resume and disconnect. If we connect again, suspend and resume we might start timers that shouldn't be running. Reset the timer flags to avoid this. This affects both mesh and managed modes. Signed-off-by: -
git://github.com/schandinat/linux-2.6Linus Torvalds authored
Pull fbdev updates from Florian Tobias Schandinat: - large updates for OMAP - support for LCD3 overlay manager (omap5) - omapdss output cleanup - removal of passive matrix LCD support as there are no drivers for such panels for DSS or DSS2 and nobody complained (cleanup) - large updates for SH Mobile - overlay support - separating MERAM (cache) from framebuffer driver - some updates for Exynos and da8xx-fb - various other small patches * tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6: (78 commits) da8xx-fb: fix compile issue due to missing include fbdev: Make pixel_to_pat() failure mode more friendly da8xx-fb: do not turn ON LCD backlight unless LCDC is enabled fbdev: sh_mobile_lcdc: Fix vertical panning step video: exynos mipi dsi: Fix mipi dsi regulators handling issue video: da8xx-fb: do clock reset of revision 2 LCDC before enabling arm: da850: configure LCDC fifo threshold video: da8xx-fb: configure FIFO threshold to reduce underflow errors video: da8xx-fb: fix flicker due to 1 frame delay in updated frame video: da8xx-fb rev2: fix disabling of palette completion interrupt da8xx-fb: add missing FB_BLANK operations video: exynos_dp: use usleep_range instead of delay video: exynos_dp: check the only INTERLANE_ALIGN_DONE bit during Link Training fb: epson1355fb: Fix section mismatch video: exynos_dp: fix wrong DPCD address during Link Training video/smscufx: fix line counting in fb_write aty128fb: Fix coding style issues fbdev: sh_mobile_lcdc: Fix pan offset computation in YUV mode fbdev: sh_mobile_lcdc: Fix overlay registers update during pan operation fbdev: sh_mobile_lcdc: Support horizontal panning ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes that have been found recently. Most of the commits are regression fixes in HD-audio and some other random drivers." * tag 'sound-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: snd-usb: fix clock source validity index ALSA: hda - Fix mute-LED GPIO initialization for IDT codecs ALSA: hda - Add descriptions for missing IDT 92HD83x models ALSA: hda - Fix polarity of mute LED on HP Mini 210 ALSA: es1688 - freeup resources on init failure ALSA: hda - Workaround for silent output on VAIO Z with ALC889 ALSA: hda - Fix WARNING from HDMI/DP parser ALSA: hda - Detach from converter at closing in patch_hdmi.c ALSA: hda - Fix mute-LED GPIO setup for HP Mini 210 ALSA: mpu401: Fix missing initialization of irq field ALSA: hda - Fix invalid D3 of headphone DAC on VT202x codecs
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull second vfs pile from Al Viro: "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the deadlock reproduced by xfstests 068), symlink and hardlink restriction patches, plus assorted cleanups and fixes. Note that another fsfreeze deadlock (emergency thaw one) is *not* dealt with - the series by Fernando conflicts a lot with Jan's, breaks userland ABI (FIFREEZE semantics gets changed) and trades the deadlock for massive vfsmount leak; this is going to be handled next cycle. There probably will be another pull request, but that stuff won't be in it." Fix up trivial conflicts due to unrelated changes next to each other in drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c} * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits) delousing target_core_file a bit Documentation: Correct s_umount state for freeze_fs/unfreeze_fs fs: Remove old freezing mechanism ext2: Implement freezing btrfs: Convert to new freezing mechanism nilfs2: Convert to new freezing mechanism ntfs: Convert to new freezing mechanism fuse: Convert to new freezing mechanism gfs2: Convert to new freezing mechanism ocfs2: Convert to new freezing mechanism xfs: Convert to new freezing code ext4: Convert to new freezing mechanism fs: Protect write paths by sb_start_write - sb_end_write fs: Skip atime update on frozen filesystem fs: Add freezing handling to mnt_want_write() / mnt_drop_write() fs: Improve filesystem freezing handling switch the protection of percpu_counter list to spinlock nfsd: Push mnt_want_write() outside of i_mutex btrfs: Push mnt_want_write() outside of i_mutex fat: Push mnt_want_write() outside of i_mutex ...
-
