- 01 Feb, 2016 40 commits
-
-
Hans Verkuil authored
A driver might detect a new standard or DV timings, but it will never change to those new timings automatically. Instead it will send an event and let the application take care of it. Make this explicit in the documentation. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ulrich Hecht authored
The rcar_vin driver relies on this. Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by:
-
Mats Randgaard authored
i2c_wr() is called from ops and the interrupt service routine, while state->wr_data is shared and unprotected, and could be overwritten. This shared buffer is therefore replaced with a local array with fixed size. The array has the size of one EDID block (128 bytes) + 2 bytes i2c address, and the EDID is written block by block (up to 8 blocks). Signed-off-by:
Mats Randgaard <matrandg@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Skip validating the standards field in v4l2_valid_dv_timings() if the V4L2_DV_BT_CAP_CUSTOM capability is set, since that implies that non-standard timings are allowed. Signed-off-by:
-
Fugang Duan authored
Dead code found on below code: si476x_radio_add_new_custom(radio, SI476X_IDX_DIVERSITY_MODE); if (rval < 0) goto exit; si476x_radio_add_new_custom(radio, SI476X_IDX_INTERCHIP_LINK); if (rval < 0) ====> Dead code !!! goto exit; The piece of code miss return value check after calling .si476x_radio_add_new_custom(), the patch fix it. Signed-off-by:Fugang Duan <B38611@freescale.com> Signed-off-by:
-
Jean-Baptiste Theou authored
dma_area needs to be freed when the device is closed. Based on em23xx-audio.c Signed-off-by:
Jean-Baptiste Theou <jtheou@adeneo-embedded.us> Signed-off-by:
-
Dan Carpenter authored
The module_param() is "default_rds_buf" and the MODULE_PARM_DESC() should match. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
It "tx_mask" was intended instead of "tx_maxk". Signed-off-by:
-
Dan Carpenter authored
The intent was to return -1 on error and that's what the callers expect but the current code returns USHRT_MAX instead. Signed-off-by:
-
Philipp Zabel authored
During the recent vb2_buffer restructuring, the calculation of the buffer payload reported to userspace was accidentally broken for the first encoded frame, counting only the length of the headers. This patch re-adds the length of the actual frame data. Fixes: 2d700715 ("[media] media: videobuf2: Restructure vb2_buffer") Reported-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Tested-by:
Jan Luebbe <jlu@pengutronix.de> Cc: <stable@vger.kernel.org> # for v4.4 and up Signed-off-by:
-
Julia Lawall authored
This sp887x_config structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
The or51211_config structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
-
Julia Lawall authored
This mxl111sf_tuner_config structure is never modified, so declare it as const. There are some indentation changes to remain within 80 columns. Done with the help of Coccinelle. Signed-off-by:
Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Julia Lawall authored
This sp8870_config structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
-
Insu Yun authored
Since kzalloc can be failed, if not properly handled, NULL dereference could be happened. Signed-off-by:
Insu Yun <wuninsu@gmail.com> Signed-off-by:
-
Insu Yun authored
Since kmalloc can be failed in memory pressure, if not properly handled, NULL dereference can be happend Signed-off-by:
-
Markus Elfring authored
Let us return directly if the element "status" of the variable "buf" indicates "BUFSTAT_READY". A check repetition can be excluded for the variable "ret" at the end then. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
This issue was detected by using the Coccinelle software. 1. Let us return directly if a buffer allocation failed. 2. Delete the jump label "err" then. 3. Drop the explicit initialisation for the variable "ret" at the beginning. 4. Return zero as a constant at the end. Signed-off-by:
-
Markus Elfring authored
Return constant integer values without storing them in the local variable "err" or "rc". Signed-off-by:
-
Niklas Söderlund authored
Don't hide the error code. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Ezequiel Garcia authored
Calling vb2_set_plane_payload is enough, there's no need to set the planes[] bytesused field. Remove it. Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Geliang Tang authored
Use to_video_device() instead of open-coding it. Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Nikola Forró authored
There are many dropped fields with some sources, leading to many redundant fields without counterparts. When this redundant field is odd, a new frame is pushed containing this odd field interleaved with whatever was left in the buffer, causing video artifacts. Do not push a new frame after processing every odd field, but do it only after those which come after an even field. Signed-off-by:
Nikola Forró <nikola.forro@gmail.com> Acked-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
-
Hans Verkuil authored
Since saa7134 is now using vb2, there is no reason why we can't support dmabuf for this driver. Signed-off-by:
-
Julia Lawall authored
The go7007_hpi_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
-
Mats Randgaard authored
Prevent unnecessary kernel log spamming. Signed-off-by:
-
Wu, Xia authored
Add dma_buf_put() to decrease refcount of the dmabuf in error path if DMABUF size is smaller than the requirement. Signed-off-by:
wu xia <xia.wu@intel.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Julia Lawall authored
The as102_priv_ops_t structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
-
Julia Lawall authored
The stv6110x_devctl structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by:
-
Mauro Carvalho Chehab authored
Add the needed bits to make em28xx to create a media controller graph. Signed-off-by: -
Mauro Carvalho Chehab authored
Create a source pad and set the media controller type to the sensor. Signed-off-by: -
Mauro Carvalho Chehab authored
[ 1841.243670] divide error: 0000 [#1] SMP KASAN [ 1841.243994] Modules linked in: em28xx_rc rc_core tda18271 drxk em28xx_dvb dvb_core em28xx_alsa mt9v011 em28xx_v4l videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core em28xx tveeprom v4l2_common videodev media cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats parport_pc ppdev lp parport snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha256_ssse3 sha256_generic hmac drbg i915 snd_hda_codec_realtek snd_hda_codec_generic aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd btusb i2c_algo_bit snd_hda_intel btrtl drm_kms_helper btbcm evdev snd_hda_codec btintel psmouse bluetooth pcspkr snd_hwdep sg drm serio_raw [ 1841.244845] snd_hda_core snd_pcm mei_me rfkill snd_timer mei snd lpc_ich soundcore shpchp i2c_i801 mfd_core battery dw_dmac i2c_designware_platform i2c_designware_core dw_dmac_core video acpi_pad button tpm_tis tpm ext4 crc16 mbcache jbd2 dm_mod hid_generic usbhid sd_mod ahci libahci libata ehci_pci e1000e xhci_pci ptp scsi_mod ehci_hcd xhci_hcd pps_core fan thermal sdhci_acpi sdhci mmc_core i2c_hid hid [last unloaded: tveeprom] [ 1841.245342] CPU: 2 PID: 38 Comm: kworker/2:1 Tainted: G W 4.5.0-rc1+ #43 [ 1841.245413] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [ 1841.245503] Workqueue: events request_module_async [em28xx] [ 1841.245557] task: ffff88009df10000 ti: ffff88009df18000 task.ti: ffff88009df18000 [ 1841.245626] RIP: 0010:[<ffffffffa135a0ad>] [<ffffffffa135a0ad>] size_to_scale+0xed/0x2c0 [em28xx_v4l] [ 1841.245714] RSP: 0018:ffff88009df1faa8 EFLAGS: 00010246 [ 1841.245756] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8803bb933b38 [ 1841.245815] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8803bb933b00 [ 1841.245879] RBP: ffff88009df1fad8 R08: ffff8803bb933b3c R09: 1ffff10077726760 [ 1841.245944] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 1841.246006] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8803b391a130 [ 1841.246071] FS: 0000000000000000(0000) GS:ffff8803c6900000(0000) knlGS:0000000000000000 [ 1841.246141] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1841.246194] CR2: 0000000001d97008 CR3: 00000003bdd85000 CR4: 00000000003406e0 [ 1841.246256] Stack: [ 1841.246278] 0000000000000246 ffff8803bb9321f0 ffff8803bb932270 ffffffffa136f7a0 [ 1841.246359] 0000000000000000 ffff8803bb932130 ffff88009df1fb20 ffffffffa13646a0 [ 1841.246439] ffffffffa127f206 ffff8803bb932130 ffff8803bb932130 ffff8803b391a130 [ 1841.246517] Call Trace: [ 1841.246548] [<ffffffffa13646a0>] em28xx_set_video_format+0x140/0x1e0 [em28xx_v4l] Signed-off-by: -
Mauro Carvalho Chehab authored
There are some devices, like Terratec Cinergy HTC, where while the device supports analog TV, the driver is not capable yet of handling it, because the analog TV driver was not written. So, don't bind the em28xx-v4l drivers on such devices. Signed-off-by: -
Mauro Carvalho Chehab authored
The tuner is at address 0x60. This address is not probed by default by tuner anymore, so we need to explicitly add it. Signed-off-by: -
Mauro Carvalho Chehab authored
If something bad happens during device registration, unregister the already registered devices. Without that, it will have lots of KASAN errors when udev would try to open the devices. Signed-off-by: -
Mauro Carvalho Chehab authored
The saa7115 driver is used on several em28xx-based devices. Now that we're about to add MC support to em28xx, we need to be sure that the saa711x demod will be properly mapped at MC. Signed-off-by: -
Mauro Carvalho Chehab authored
The tvp5150 is an analog TV decoder. Identify as such at the media graph, or otherwise devices using it would fail. That avoids the following warning: [ 1546.669139] usb 2-3.3: Entity type for entity tvp5150 5-005c was not initialized! Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Add pads and set the device type when used with the media controller. Signed-off-by: -
Mauro Carvalho Chehab authored
The tvp5150 doesn't have just one pad. It has 3 ones: - IF input - Video output - VBI output Fix it and use the macros for the pad indexes. Reviewed-by:
-
Mauro Carvalho Chehab authored
We also need to standardize the PAD index macros for demods, as they all should look the same in a media graph. Signed-off-by:
-
