- 10 Jan, 2007 37 commits
-
-
Jan Andersson authored
Add sg->offset to sg->dvma_address in pci_map_sg() on sparc32. Without the offset, transfers to buffers that do not begin on a page boundary will not work as expected. Signed-off-by:
Jan Andersson <jan.andersson@ieee.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: William Lee Irwin III <wli@holomorphy.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org> Signed-off-by:
Chris Wright <chrisw@sous-sol.org>
-
David Woodhouse authored
Don't add it there please; add it lower down inside the existing #ifdef __KERNEL__. You just made the _userspace_ net.h include random.h, which then fails to compile unless <asm/types.h> was already included. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
David Miller authored
And this points out that the return value from isa_dev_get_resource() and the 'pregs' arg to isa_dev_get_irq() are totally unused. Based upon a patch from Richard Mortimer <richm@oldelvet.org.uk> Signed-off-by:
-
David Miller authored
We were not being careful enough. When we trim the physical memory areas, we have to make sure we don't remove the kernel image or initial ramdisk image ranges. Signed-off-by:
-
Robert Olsson authored
Signed-off-by:
-
Eric Sandeen authored
This one was pointed out on the MOKB site: http://kernelfun.blogspot.com/2006/11/mokb-09-11-2006-linux-26x-ext2checkpage.html If a directory's i_size is corrupted, ext2_find_entry() will keep processing pages until the i_size is reached, even if there are no more blocks associated with the directory inode. This patch puts in some minimal sanity-checking so that we don't keep checking pages (and issuing errors) if we know there can be no more data to read, based on the block count of the directory inode. This is somewhat similar in approach to the ext3 patch I sent earlier this year. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Phillip Lougher authored
Steve Grubb's fzfuzzer tool (http://people.redhat.com/sgrubb/files/ fsfuzzer-0.6.tar.gz) generates corrupt Cramfs filesystems which cause Cramfs to kernel oops in cramfs_uncompress_block(). The cause of the oops is an unchecked corrupted block length field read by cramfs_readpage(). This patch adds a sanity check to cramfs_readpage() which checks that the block length field is sensible. The (PAGE_CACHE_SIZE << 1) size check is intentional, even though the uncompressed data is not going to be larger than PAGE_CACHE_SIZE, gzip sometimes generates compressed data larger than the original source data. Mkcramfs checks that the compressed size is always less than or equal to PAGE_CACHE_SIZE << 1. Of course Cramfs could use the original uncompressed data in this case, but it doesn't. Signed-off-by:
Phillip Lougher <phillip@lougher.org.uk> Signed-off-by:
-
Eric Sandeen authored
I've been using Steve Grubb's purely evil "fsfuzzer" tool, at http://people.redhat.com/sgrubb/files/fsfuzzer-0.4.tar.gz Basically it makes a filesystem, splats some random bits over it, then tries to mount it and do some simple filesystem actions. At best, the filesystem catches the corruption gracefully. At worst, things spin out of control. As you might guess, we found a couple places in ext3 where things spin out of control :) First, we had a corrupted directory that was never checked for consistency... it was corrupt, and pointed to another bad "entry" of length 0. The for() loop looped forever, since the length of ext3_next_entry(de) was 0, and we kept looking at the same pointer over and over and over and over... I modeled this check and subsequent action on what is done for other directory types in ext3_readdir... (adding this check adds some computational expense; I am testing a followup patch to reduce the number of times we check and re-check these directory entries, in all cases. Thanks for the idea, Andreas). Next we had a root directory inode which had a corrupted size, claimed to be > 200M on a 4M filesystem. There was only really 1 block in the directory, but because the size was so large, readdir kept coming back for more, spewing thousands of printk's along the way. Per Andreas' suggestion, if we're in this read error condition and we're trying to read an offset which is greater than i_blocks worth of bytes, stop trying, and break out of the loop. With these two changes fsfuzz test survives quite well on ext3. Signed-off-by:
-
Ulrich Kunitz authored
The driver called ieee80211_rx in hardware interrupt context. This has been against the intention of the ieee80211_rx function. It caused a bug in the crypto routines used by WPA. This patch calls ieee80211_rx in a tasklet. Signed-off-by:
Ulrich Kunitz <kune@deine-taler.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Ulrich Kunitz authored
In 2.6.19 a deauthentication from the AP doesn't start a reassociation by the softmac code. It appears that mac->associnfo.associating must be set and the ieee80211softmac_assoc_work function must be scheduled. This patch fixes that. Signed-off-by:
-
Shantanu Goel authored
Fix a rather obvious buglet. Noticed while instrumenting the VM using /proc/vmstat. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by:
-
Dimitri Gorokhovik authored
ramfs doesn't provide the .set_dirty_page a_op, and when the BLOCK layer is not configured in, 'set_page_dirty' makes a call via a NULL pointer. Signed-off-by:
Dimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: <stable@kernel.org> Signed-off-by:
-
Shaohua Li authored
In VMSPLIT mode, kernel PGD might have more entries than user space Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Signed-off-by:
-
Mike Miller authored
This patch fixes a stupid bug. Sometime during the 2tb enhancement I ended up replacing the macros XFER_READ and XFER_WRITE with h->cciss_read and h->cciss_write respectively. It seemed to work somehow at least on x86_64 and ia64. I don't know how. But people started complaining about command timeouts on older controllers like the 64xx series and only on ia32. This resolves the issue reproduced in our lab. Please consider this for inclusion. Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
-
David Miller authored
When this code was converted to use sk_for_each() the logic for the "best hash chain length" code was reversed, breaking everything. The original code was of the form: size = 0; do { if (++size >= best_size_so_far) goto next; } while ((sk = sk->next) != NULL); best_size_so_far = size; best = result; next:; and this got converted into: sk_for_each(sk2, node, head) if (++size < best_size_so_far) { best_size_so_far = size; best = result; } Which does something very very different from the original. Signed-off-by: -
Ed L Cashin authored
Fix a bug that only appears when AoE goes over a network card that does not support scatter-gather. The headers in the linear part of the skb appeared to be larger than they really were, resulting in data that was offset by 24 bytes. This patch eliminates the offset data on cards that don't support scatter-gather or have had scatter-gather turned off. There remains an unrelated issue that I'll address in a separate email. Fixes bugzilla #7662 Signed-off-by:
"Ed L. Cashin" <ecashin@coraid.com> Cc: <stable@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: <boddingt@optusnet.com.au> Signed-off-by:
-
Vitaly Wool authored
Fix the compilation failure for smc911x.c when NET_POLL_CONTROLLER is set. Signed-off-by:
Vitaly Wool <vitalywool@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by:
-
Badari Pulavarty authored
Ran into BUG() while doing madvise(REMOVE) testing. If we are punching a hole into shared memory segment using madvise(REMOVE) and the entire hole is below the indirect blocks, we hit following assert. BUG_ON(limit <= SHMEM_NR_DIRECT); Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: <stable@kernel.org> Signed-off-by:
-
Ingo Molnar authored
Fernando Lopez-Lezcano reported frequent scheduling latencies and audio xruns starting at the 2.6.18-rt kernel, and those problems persisted all until current -rt kernels. The latencies were serious and unjustified by system load, often in the milliseconds range. After a patient and heroic multi-month effort of Fernando, where he tested dozens of kernels, tried various configs, boot options, test-patches of mine and provided latency traces of those incidents, the following 'smoking gun' trace was captured by him: _------=> CPU# / _-----=> irqs-off | / _----=> need-resched || / _---=> hardirq/softirq ||| / _--=> preempt-depth |||| / ||||| delay cmd pid ||||| time | caller \ / ||||| \ | / IRQ_19-1479 1D..1 0us : __trace_start_sched_wakeup (try_to_wake_up) IRQ_19-1479 1D..1 0us : __trace_start_sched_wakeup <<...>-5856> (37 0) IRQ_19-1479 1D..1 0us : __trace_start_sched_wakeup (c01262ba 0 0) IRQ_19-1479 1D..1 0us : resched_task (try_to_wake_up) IRQ_19-1479 1D..1 0us : __spin_unlock_irqrestore (try_to_wake_up) ... <idle>-0 1...1 11us!: default_idle (cpu_idle) ... <idle>-0 0Dn.1 602us : smp_apic_timer_interrupt (c0103baf 1 0) ... <...>-5856 0D..2 618us : __switch_to (__schedule) <...>-5856 0D..2 618us : __schedule <<idle>-0> (20 162) <...>-5856 0D..2 619us : __spin_unlock_irq (__schedule) <...>-5856 0...1 619us : trace_stop_sched_switched (__schedule) <...>-5856 0D..1 619us : trace_stop_sched_switched <<...>-5856> (37 0) what is visible in this trace is that CPU#1 ran try_to_wake_up() for PID:5856, it placed PID:5856 on CPU#0's runqueue and ran resched_task() for CPU#0. But it decided to not send an IPI that no CPU - due to TS_POLLING. But CPU#0 never woke up after its NEED_RESCHED bit was set, and only rescheduled to PID:5856 upon the next lapic timer IRQ. The result was a 600+ usecs latency and a missed wakeup! the bug turned out to be an idle-wakeup bug introduced into the mainline kernel this summer via an optimization in the x86_64 tree: commit 495ab9c0 Author: Andi Kleen <ak@suse.de> Date: Mon Jun 26 13:59:11 2006 +0200 [PATCH] i386/x86-64/ia64: Move polling flag into thread_info_status During some profiling I noticed that default_idle causes a lot of memory traffic. I think that is caused by the atomic operations to clear/set the polling flag in thread_info. There is actually no reason to make this atomic - only the idle thread does it to itself, other CPUs only read it. So I moved it into ti->status. the problem is this type of change: if (!hlt_counter && boot_cpu_data.hlt_works_ok) { - clear_thread_flag(TIF_POLLING_NRFLAG); + current_thread_info()->status &= ~TS_POLLING; smp_mb__after_clear_bit(); while (!need_resched()) { local_irq_disable(); this changes clear_thread_flag() to an explicit clearing of TS_POLLING. clear_thread_flag() is defined as: clear_bit(flag, &ti->flags); and clear_bit() is a LOCK-ed atomic instruction on all x86 platforms: static inline void clear_bit(int nr, volatile unsigned long * addr) { __asm__ __volatile__( LOCK_PREFIX "btrl %1,%0" hence smp_mb__after_clear_bit() is defined as a simple compile barrier: #define smp_mb__after_clear_bit() barrier() but the explicit TS_POLLING clearing introduced by the patch: + current_thread_info()->status &= ~TS_POLLING; is not an atomic op! So the clearing of the TS_POLLING bit is freely reorderable with the reading of the NEED_RESCHED bit - and both now reside in different memory addresses. CPU idle wakeup very much depends on ordered memory ops, the clearing of the TS_POLLING flag must always be done before we test need_resched() and hit the idle instruction(s). [Symmetrically, the wakeup code needs to set NEED_RESCHED before it tests the TS_POLLING flag, so memory ordering is paramount.] Fernando's dual-core Athlon64 system has a sufficiently advanced memory ordering model so that it triggered this scenario very often. ( And it also turned out that the reason why these latencies never triggered on my testsystems is that i routinely use idle=poll, which was the only idle variant not affected by this bug. ) The fix is to change the smp_mb__after_clear_bit() to an smp_mb(), to act as an absolute barrier between the TS_POLLING write and the NEED_RESCHED read. This affects almost all idling methods (default, ACPI, APM), on all 3 x86 architectures: i386, x86_64, ia64. Signed-off-by:Ingo Molnar <mingo@elte.hu> Tested-by:
Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU> [chrisw: backport to 2.6.19.1] Signed-off-by:
-
Dirk Eibach authored
On a custom board with ds1337 RTC I found that upgrade from 2.6.15 to 2.6.18 broke RTC support. The main problem are changes to ds1337_init_client(). When a ds1337 recognizes a problem (e.g. power or clock failure) bit 7 in status register is set. This has to be reset by writing 0 to status register. But since there are only 16 byte written to the chip and the first byte is interpreted as an address, the status register (which is the 16th) is never written. The other problem is, that initializing all registers to zero is not valid for day, date and month register. Funny enough this is checked by ds1337_detect(), which depends on this values not being zero. So then treated by ds1337_init_client() the ds1337 is not detected anymore, whereas the failure bit in the status register is still set. Broken by commit f9e89579 (2.6.16-rc1, 2006-01-06). This fix is in Linus' tree since 2.6.20-rc1 (commit 763d9c04). Signed-off-by:
Dirk Stieler <stieler@gdsys.de> Signed-off-by:
Dirk Eibach <eibach@gdsys.de> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Marcel Holtmann authored
With malformed packets it might be possible to overwrite internal CMTP and CAPI data structures. This patch adds additional length checks to prevent these kinds of remote attacks. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Tejun Heo authored
Clear-garbage-after-CDB patch missed scsi_execute() and it causes some ODDs (HL-DT-ST DVD-RAM GSA-H30N) choke during SCSI scan. Note that this patch is only for -stable. There is another more reliable fix for this problem proposed for devel tree. http://thread.gmane.org/gmane.linux.ide/14605/focus=14605Signed-off-by:
Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
Roland Dreier authored
struct srp_device.fmr_page_mask was unsigned long, which means that the top part of addresses above 4G was being chopped off on 32-bit architectures. Of course nothing good happens when data from SRP targets is DMAed to the wrong place. Fix this by changing fmr_page_mask to u64, to match the addresses actually used by IB devices. Thanks to Brian Cain <Brian.Cain@ge.com> and David McMillen <davem@systemfabricworks.com> for help diagnosing the bug and testing the fix. Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Tim Chen authored
The structure cpu_isolated_map is used not only during initialization. Multi-core scheduler configuration changes and exclusive cpusets use this during run time. During setting of sched_mc_power_savings policy, this structure is accessed to update sched_domains. Signed-off-by:
Tim Chen <tim.c.chen@intel.com> Acked-by:
Suresh Siddha <suresh.b.siddha@intel.com> Acked-by:
-
Russell King authored
Later glibc requires the *at syscalls. Add them. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Roman Zippel authored
The as-instr/ld-option need to create temporary files, but create them in the output directory, when compiling external modules. Reformat them a bit and use $(CC) instead of $(AS) as the former is used by kbuild to assemble files. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Cc: Andi Kleen <ak@suse.de> Cc: Jan Beulich <jbeulich@novell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: <jpdenheijer@gmail.com> Cc: Horst Schirmeier <horst@schirmeier.com> Cc: Daniel Drake <dsd@gentoo.org> Signed-off-by:
-
Stefan Richter authored
Fixes http://bugzilla.kernel.org/show_bug.cgi?id=7431 iBook G3 threw a machine check exception and put the display backlight to full brightness after ohci1394 was unloaded and reloaded. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> [dsd@gentoo.org: also added missing if condition, commit 63cca59e] Signed-off-by:
Daniel Drake <dsd@gentoo.org> Acked-by:
-
Tejun Heo authored
libata waits for !BSY even when the status register reports 0xff. This causes long boot delays when D8 isn't pulled down properly. This patch does the followings. * don't wait if status register is 0xff in all wait functions * make ata_busy_sleep() return 0 on success and -errno on failure. -ENODEV is returned on 0xff status and -EBUSY on other failures. * make ata_bus_softreset() succeed on 0xff status. 0xff status is not reset failure. It indicates no device. This removes unnecessary retries on such ports. Note that the code change assumes unoccupied port reporting 0xff status does not produce valid device signature. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
John W. Linville authored
This reverts commit 4e1bbd84. Quoth Daniel Drake <dsd@gentoo.org>: "A user reported that commit 4e1bbd84 (Remove unneeded packed attributes) breaks the zd1211rw driver on ARM." Signed-off-by:
-
Hans Verkuil authored
The TUNER_LG_NTSC_TAPE is identical in all respects to the TUNER_PHILIPS_FM1236_MK3. So use the params struct for the Philips tuner. Also add this LG_NTSC_TAPE tuner to the switches where radio specific parameters are set so it behaves like a TUNER_PHILIPS_FM1236_MK3. This change fixes the radio support for this tuner (the wrong bandswitch byte was used). Thanks to Andy Walls <cwalls@radix.net> for finding this bug. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
In some cases when using VSB, the AGC status register has been known to falsely report "no signal" when in fact there is a carrier lock. The datasheet labels these status flags as QAM only, yet the lgdt330x module is using these flags for both QAM and VSB. This patch allows for the carrier recovery lock status register to be tested, even if the agc signal status register falsely reports no signal. Thanks to jcrews from #linuxtv in irc, for initially reporting this bug. Signed-off-by:
-
Andy Gospodarek authored
This is a small fix-up to finish out the work done by Jay Vosburgh to add carrier-state support for bonding devices. The output in /proc/net/bonding/bondX was correct, but when collecting the same info via an iotcl it could still be incorrect. Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Arjan van de Ven authored
On the Core2 cpus, the rdtsc instruction is not serializing (as defined in the architecture reference since rdtsc exists) and due to the deep speculation of these cores, it's possible that you can observe time go backwards between cores due to this speculation. Since the kernel already deals with this with the SYNC_RDTSC flag, the solution is simple, only assume that the instruction is serializing on family 15... The price one pays for this is a slightly slower gettimeofday (by a dozen or two cycles), but that increase is quite small to pay for a really-going-forward tsc counter. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Ulrich Kunitz authored
ieee80211softmac_wx_get_genie locks the associnfo mutex at function exit. This patch fixes it. The patch is against Linus' tree (commit af1713e0). Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Hugh Dickins authored
Ramiro Voicu hits the BUG_ON(!pte_none(*pte)) in zeromap_pte_range: kernel bugzilla 7645. Right: read_zero_pagealigned uses down_read of mmap_sem, but another thread's racing read of /dev/zero, or a normal fault, can easily set that pte again, in between zap_page_range and zeromap_page_range getting there. It's been wrong ever since 2.4.3. The simple fix is to use down_write instead, but that would serialize reads of /dev/zero more than at present: perhaps some app would be badly affected. So instead let zeromap_page_range return the error instead of BUG_ON, and read_zero_pagealigned break to the slower clear_user loop in that case - there's no need to optimize for it. Use -EEXIST for when a pte is found: BUG_ON in mmap_zero (the other user of zeromap_page_range), though it really isn't interesting there. And since mmap_zero wants -EAGAIN for out-of-memory, the zeromaps better return that than -ENOMEM. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: Ramiro Voicu: <Ramiro.Voicu@cern.ch> Cc: <stable@kernel.org> Signed-off-by:
-
Herbert Xu authored
The SHA384 block size should be 128 bytes, not 96 bytes. This was spotted by Andrew Donofrio. This breaks HMAC which uses the block size during setup and the final calculation. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
As CBC is the default chaining method for cryptoloop, we should select it from cryptoloop to ease the transition. Spotted by Rene Herman. Signed-off-by:
-
- 11 Dec, 2006 3 commits
-
-
Chris Wright authored
-
David Miller authored
GLIBC uses them etc. They are guarded by ifndef __KERNEL__ so nobody will start accidently using them in the kernel again, it's just for userspace. Signed-off-by:
-
Daniel Barkalow authored
At least some nforce cards continue to send legacy interrupts when MSI is enabled, and these interrupts are treated as unhandled by the kernel. This patch disables legacy interrupts explicitly when enabling MSI mode. The correct fix is to change the MSI infrastructure to disable legacy interrupts when enabling MSI, but this is potentially risky if the device isn't PCI-2.3 or is quirky, so the correct fix is going into mainline, while patches like this one go into -stable. Legend has it that it is most correct to disable legacy interrupts before enabling MSI, but the mainline patch does it in the other order, and this patch is "obviously" the same as mainline. Signed-off-by:
Daniel Barkalow <barkalow@iabervon.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Greg KH <gregkh@suse.de> Signed-off-by:
-
