- 22 May, 2020 33 commits
-
-
Lyude Paul authored
Right now, we make the mistake of allowing interlacing on all connectors. Nvidia hardware does not always support interlacing with DP though, so we need to make sure that we don't allow interlaced modes to be set in such situations as otherwise we'll end up accidentally hanging the display HW. This fixes some hangs with Turing, which would be caused by attempting to set an interlaced mode on hardware that doesn't support it. This patch likely fixes other hardware hanging in the same way as well. Note that we say we probe PIOR caps, but they don't actually have any interlacing caps. So, the get_caps() function for PIORs just sets interlacing support to true. Changes since v1: * Actually probe caps correctly this time, both on EVO and NVDisplay. Changes since v2: * Fix probing for < GF119 * Use vfunc table, in prep for adding more caps in the future. Signed-off-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com>
-
Lyude Paul authored
We'll need the core channel initialized and ready by the time that we start creating modesetting objects, so that we can call the NV507D_GET_CAPABILITIES method to make the hardware expose it's modesetting capabilities for later probing. So, when loading the driver prepare the core channel from within nouveau_display_create(). Everywhere else, we initialize the core channel during resume. Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Register has moved on GV100. Signed-off-by: -
Ben Skeggs authored
We're going to use the bound head to select HDA device entry. Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Takashi Iwai authored
Since the commit 742db30c ("drm/nouveau: Add HD-audio component notifier support"), the nouveau driver notifies and pokes the HD-audio HPD and ELD via audio component, but this seems broken. The culprit is the naive assumption that crtc->index corresponds to the HDA pin. Actually this rather corresponds to the MST dev_id (alias "pipe" in the audio component framework) while the actual port number is given from the output ior id number. This patch corrects the assignment of port and dev_id arguments in the audio component ops to recover from the HDMI/DP audio regression. Fixes: 742db30c ("drm/nouveau: Add HD-audio component notifier support") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207223 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Karol Herbst authored
Using ENODEV as this prevents probe failed errors in dmesg. v2: move check further down Signed-off-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Karol Herbst authored
v2: relax the checks a little Signed-off-by:
-
Karol Herbst authored
Fixes warnings on GPUs with smaller a smaller mmio region like vGPUs. Signed-off-by:
-
Zheng Bin authored
Fixes coccicheck warning: drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.h:307:2-3: Unneeded semicolon drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c:583:2-3: Unneeded semicolon Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Signed-off-by:
-
Kai-Heng Feng authored
Replace nouveau_pr3_present() in favor of a more generic one, pci_pr3_present(). Also the presence of upstream bridge _PR3 doesn't need to go hand in hand with device's _DSM, so check _PR3 before _DSM. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Zou Wei authored
Fixes coccicheck warning: drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c:103:23-30: WARNING opportunity for kmemdup drivers/gpu/drm/nouveau/nvkm/subdev/acr/hsfw.c:113:22-29: WARNING opportunity for kmemdup Fixes: 22dcda45 ("drm/nouveau/acr: implement new subdev to replace "secure boot"") Reported-by:
Zou Wei <zou_wei@huawei.com> Signed-off-by:
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Ralph Campbell authored
When memory is migrated to the GPU, it is likely to be accessed by GPU code soon afterwards. Instead of waiting for a GPU fault, map the migrated memory into the GPU page tables with the same access permissions as the source CPU page table entries. This preserves copy on write semantics. Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
Ben Skeggs authored
Signed-off-by: -
James Jones authored
Allow setting the block layout of a nouveau FB object using DRM format modifiers. When specified, the format modifier block layout and kind overrides the GEM buffer's implicit layout and kind. The specified format modifier is validated against the list of modifiers supported by the target display hardware. v2: Used Tesla family instead of NV50 chipset compare v4: Do not cache kind, tile_mode in nouveau_framebuffer v5: Resolved against nouveau_framebuffer cleanup Signed-off-by:
James Jones <jajones@nvidia.com> Signed-off-by:
-
James Jones authored
Make sure framebuffer dimensions and tiling parameters will not result in accesses beyond the end of the GEM buffer they are bound to. v3: Return EINVAL when creating FB against BO with unsupported tiling v5: Resolved against nouveau_framebuffer cleanup Signed-off-by: -
James Jones authored
Advertise support for the full list of format modifiers supported by each class of NVIDIA desktop GPU display hardware. Stash the array of modifiers in the nouveau_display struct for use when validating userspace framebuffer creation requests, which will be supportd in a subsequent change. Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Thomas Zimmermann authored
After its cleanup, struct nouveau_framebuffer is only a wrapper around struct drm_framebuffer. Use the latter directly. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Thomas Zimmermann authored
The buffer object stored in nvbo is also available GEM object in obj[0] of struct drm_framebuffer. Therefore remove nvbo in favor obj[0] and replace all references accordingly. This may require an additional cast. With this change we can already replace nouveau_user_framebuffer_destroy() and nouveau_user_framebuffer_create_handle() with generic GEM helpers. Calls to nouveau_framebuffer_new() receive a GEM object. Signed-off-by:
-
Thomas Zimmermann authored
The vma field of struct nouveau_framebuffer is a special field for the the accelerated fbdev console. Hence there's at most one single instance for the active console. Moving it into struct nouveau_fbdev makes struct nouveau_framebuffer slightly smaller and brings it closer to struct drm_framebuffer. Signed-off-by:
-
Thomas Zimmermann authored
Signed-off-by:
-
Ben Skeggs authored
The $(srctree) addition a while back busted building the out-of-tree version of the module, and I've been hacking it up ever since. This allows us to work around the issue. Signed-off-by: -
James Jones authored
Builds upon the existing NVIDIA 16Bx2 block linear format modifiers by adding more "fields" to the existing parameterized DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK format modifier macro that allow fully defining a unique-across- all-NVIDIA-hardware bit layout using a minimal set of fields and values. The new modifier macro DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D is effectively backwards compatible with the existing macro, introducing a superset of the previously definable format modifiers. Backwards compatibility has two quirks. First, the zero value for the "kind" field, which is implied by the DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK macro, must be special cased in drivers and assumed to map to the pre-Turing generic kind of 0xfe, since a kind of "zero" is reserved for linear buffer layouts on all GPUs. Second, it is assumed backwards compatibility is only needed when running on Tegra GPUs, and specifically Tegra GPUs prior to Xavier. This is based on two assertions: -Tegra GPUs prior to Xavier used a slightly different raw bit layout than desktop GPUs, making it impossible to directly share block linear buffers between the two. -Support for the existing block linear modifiers was incomplete, making them useful only for exporting buffers created by nouveau and importing them to Tegra DRM as framebuffers for scan out. There was no support for adding framebuffers using format modifiers in nouveau, nor importing dma-buf/PRIME GEM objects into nouveau userspace drivers with modifiers in Mesa. Hence it is assumed the prior modifiers were not intended for use on desktop GPUs, and as a corollary, were not intended to support sharing block linear buffers across two different NVIDIA GPUs. v2: - Added canonicalize helper function v3: - Added additional bit to compression field to support Tesla (NV5x,G8x,G9x,GT1xx,GT2xx) class chips. Signed-off-by:
-
- 21 May, 2020 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2020-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Fix for TypeC power domain toggling on resets (Cc: stable). Two compile time warning fixes. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200520123227.GA21104@jlahtine-desk.ger.corp.intel.com
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Check imported buffer mapping in generic way - This patch reworks exynos_drm_gem_prime_import_sg_table function, which checks if the imported buffer has been mapped as contiguous or not in generic way, and flag a exynos gem buffer type properly according to the mapped way. Fixups - Drop a reference count to in_bridge_node correctly. - Enable the runtime power management correctly. . The runtime pm should be enabled before calling compont_add(). Cleanups - Do not register "by hand" a sysfs file, and use dev_groups instead. - Drop internal 'pages' array which aren't needed. - Remove dead-code. - Correct type casting. - Drop unnecessary error messages. Signed-off-by:
-
- 20 May, 2020 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - drm/i915: Show per-engine default property values in sysfs By providing the default values configured into the kernel via sysfs, it is much more convenient for userspace to restore those sane defaults, or at least know what are considered good baseline. This is useful, for example, to cleanup after any failed userspace prior to commencing new jobs. Cross-subsystem Changes: - video/hdmi: Add Unpack only function for DRM infoframe - Includes pull request gvt-next-2020-05-12 Driver Changes: - Restore Cherryview back to full-ppgtt (Chris, Mika) - Document locking guidelines for i915 (Chris, Daniel, Joonas) - Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris) - Display WA #1105: Require linear fb stride to be multiple of 512 bytes on gen9/glk (Ville) - Add Wa_14010685332 for ICP/ICL (Matt R) - Restrict w/a 1607087056 for EHL/JSL (Swathi) - Fix interrupt handling for DP AUX transactions on Tigerlake (Imre) - Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika) - Fix HDC pipeline flush hardware bit on Gen12 (Mika) - Flush L3 when flushing render on Gen12 (Mika) - Invalidate aux table entries forcibly between BB on Gen12 (Mika) - Add aux table invalidate for all engines on Gen12 (Mika) - Force pte cacheline to main memory Gen8+ (Mika) - Add and enable TGL+ SAGV support (Stanislav) - Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian) - Replace zero-length array with flexible-array (Gustavo) - Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris) - Remove wait priority boosting (Chris) - Keep driver module referenced when PMU is active (Chris) - Sanitize RPS interrupts upon resume (Chris) - Extend pcode read timeout to 20 ms (Chris) - Wait for ACT sent before enabling MST pipe (Ville) - Extend support to async relocations to SNB (Chris) - Remove CNL pre-prod workarounds (Ville) - Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan) - Record the active CCID from before reset (Chris) - Mark concurrent submissions with a weak-dependency (Chris) - Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel) - Prevent using semaphores to chain up to external fences (Chris) - Fix GLK watermark calculations (Ville) - Emit await(batch) before MI_BB_START (Chris) - Reset execlists registers before HWSP (Chris) - Drop no-semaphore boosting in favor of fast timeslicing (Chris) - Fix enabled infoframe states of lspcon (Gwan-gyeong) - Program DP SDPs on pipe updates (Gwan-gyeong) - Stop sending DP SDPs on ddi disable (Gwan-gyeong) - Store CS timestamp frequency in Hz (Ville) - Remove unused HAS_FWTABLE macro (Pascal) - Use batchbuffer chaining for relocations to save ring space (Chris) - Try different engines for relocs if MI ops not supported (Chris, Tvrtko) - Lazily acquire the device wakeref for freeing objects (Chris) - Streamline display code arithmetics around rounding etc. (Ville) - Use bw state for per crtc SAGV evaluation (Stanislav) - Track active_pipes in bw_state (Stanislav) - Nuke mode.vrefresh usage (Ville) - Warn if the FBC is still writing to stolen on removal (Chris) - Added new PCode commands prepping for QGV rescricting (Stansilav) - Stop holding onto the pinned_default_state (Chris) - Propagate error from completed fences (Chris) - Ignore submit-fences on the same timeline (Chris) - Pull waiting on an external dma-fence into its routine (Chris) - Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris) - Mark up the racy read of execlists->context_tag (Chris) - Tidy up the return handling for completed dma-fences (Chris) - Introduce skl_plane_wm_level accessor (Stanislav) - Extract SKL SAGV checking (Stanislav) - Make active_pipes check skl specific (Stanislav) - Suspend tasklets before resume sanitization (Chris) - Remove redundant exec_fence (Chris) - Mark the addition of the initial-breadcrumb in the request (Chris) - Transfer old virtual breadcrumbs to irq_worker (Chris) - Read the DP SDPs from the video DIP (Gwan-gyeong) - Program DP SDPs with computed configs (Gwan-gyeong) - Add state readout for DP VSC and DP HDR Metadata Infoframe SDP (Gwan-gyeong) - Add compute routine for DP PSR VSC SDP (Gwan-gyeong) - Use new DP VSC SDP compute routine on PSR (Gwan-gyeong) - Restrict qgv points which don't have enough bandwidth. (Stanislav) - Nuke pointless div by 64bit (Ville) - Static checker code fixes (Nathan, Mika, Chris) - Add logging function for DP VSC SDP (Gwan-gyeong) - Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the crtc state dump (Gwan-gyeong) - Make timeslicing explicit engine property (Chris, Tvrtko) - Selftest and debugging improvements (Chris) - Align variable names with BSpec (Ville) - Tidy up gen8+ breadcrumb emission code (Chris) - Turn intel_digital_port_connected() in a vfunc (Ville) - Use stashed away hpd isr bits in intel_digital_port_connected() (Ville) - Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville) Signed-off-by: -
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.8-2020-05-19: amdgpu: - Improved handling for CTF (Critical Thermal Fault) situations - Clarify AC/DC mode switches - SR-IOV fixes - XGMI fixes for RAS - Misc cleanups - Add autodump debugfs node to aid in GPU hang debugging UAPI: - Add a MEM_SYNC IB flag for handling proper acquire memory semantics if UMDs expect the kernel to handle this Used by AMDVLK: https://github.com/GPUOpen-Drivers/pal/blob/dev/src/core/os/amdgpu/amdgpuQueue.cpp#L1262Signed-off-by:
-
- 19 May, 2020 3 commits
-
-
Imre Deak authored
Make sure to select the port's AUX power domain while holding the TC port lock. The domain depends on the port's current TC mode, which may get changed under us if we're not holding the lock. This was left out from commit 8c10e226 ("drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers") Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200514204553.27193-1-imre.deak@intel.com (cherry picked from commit ae9b6cfe) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Nathan Chancellor authored
When CONFIG_DRM_I915_DEBUG_GEM is not set, clang warns: drivers/gpu/drm/i915/gvt/scheduler.c:884:1: warning: function 'check_shadow_context_ppgtt' is not needed and will not be emitted [-Wunneeded-internal-declaration] check_shadow_context_ppgtt(struct execlist_ring_context *c, struct intel_vgpu_mm *m) ^ 1 warning generated. This warning is similar to -Wunused-function but rather than warning that the function is completely unused, it warns that it is used in some expression within the file but that expression will be evaluated to a constant or be optimized away in the final assembly, essentially making it appeared used but really isn't. Usually, this happens when a function or variable is only used in sizeof, where it will appear to be used but will be evaluated at compile time and not be required to be emitted. In this case, the function is only used in GEM_BUG_ON, which is defined as BUILD_BUG_ON_INVALID, which intentionally follows this pattern. To fix this warning, add __maybe_unused to make it clear that this is intentional depending on the configuration. Fixes: bec3df93 ("drm/i915/gvt: Support PPGTT table load command") Link: https://github.com/ClangBuiltLinux/linux/issues/1027Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Arnd Bergmann authored
After the function is no longer marked 'inline', there is now a new warning pointing out that the only caller is inside of an #ifdef: drivers/gpu/drm/i915/display/intel_panel.c:493:12: warning: 'scale_user_to_hw' defined but not used [-Wunused-function] 493 | static u32 scale_user_to_hw(struct intel_connector *connector, | ^~~~~~~~~~~~~~~~ Move the function itself into that #ifdef as well. Fixes: 81b55ef1 ("drm/i915: drop a bunch of superfluous inlines") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
