Skip to content

L
linux
Switch branch/tag
  1. 22 Oct, 2016 27 commits
  3. 20 Oct, 2016 5 commits
  5. 16 Oct, 2016 8 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.8.2 · cb5d016a
      Greg Kroah-Hartman authored
      cb5d016a
    • Jarkko Sakkinen's avatar
      tpm_crb: fix crb_req_canceled behavior · 87d6616d
      Jarkko Sakkinen authored 
      commit 72fd50e1 upstream.

The req_canceled() callback is used by tpm_transmit() periodically to
check whether the request has been canceled while it is receiving a
response from the TPM.

The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel
callback, which has two consequences:

* Cancel might not happen.
* req_canceled() always returns zero.

A better place to clear the register is when starting to send a new
command. The behavior of TPM_CRB_CTRL_CANCEL is described in the
section 5.5.3.6 of the PTP specification.

Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: default avatarJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      87d6616d
    • Jarkko Sakkinen's avatar
      tpm: fix a race condition in tpm2_unseal_trusted() · 17b6c49b
      Jarkko Sakkinen authored 
      commit d4816edf upstream.

Unseal and load operations should be done as an atomic operation. This
commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted()
can do the locking by itself.

Fixes: 0fe54803 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Signed-off-by: default avatarJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: default avatarJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      17b6c49b
    • Miklos Szeredi's avatar
      ima: use file_dentry() · a8284cff
      Miklos Szeredi authored 
      commit e71b9dff upstream.

Ima tries to call ->setxattr() on overlayfs dentry after having locked
underlying inode, which results in a deadlock.
Reported-by: default avatarKrisztian Litkey <kli@iki.fi>
Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a8284cff
    • Dmitry Tunin's avatar
      Bluetooth: Add a new 04ca:3011 QCA_ROME device · 8af6ecc2
      Dmitry Tunin authored 
      commit 1144a4ee upstream.

BugLink: https://bugs.launchpad.net/bugs/1535802

T:  Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3011 Rev=00.01
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: default avatarDmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8af6ecc2
    • Christophe Jaillet's avatar
      ARM: cpuidle: Fix error return code · ec07719b
      Christophe Jaillet authored 
      commit af48d7bc upstream.

We know that 'ret = 0' because it has been tested a few lines above.
So, if 'kzalloc' fails, 0 will be returned instead of an error code.
Return -ENOMEM instead.

Fixes: a0d46a3d ("ARM: cpuidle: Register per cpuidle device")
Signed-off-by: default avatarChristophe Jaillet <christophe.jaillet@wanadoo.fr>
Acked-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ec07719b
    • Linus Walleij's avatar
      ARM: dts: MSM8660 remove flags from SPMI/MPP IRQs · 88277ac7
      Linus Walleij authored 
      commit dcf5907e upstream.

The Qualcomm SPMI GPIO and MPP lines are problematic: the
are fetched from the main MFD driver with platform_get_irq()
which means that at this point they will all be assigned the
flags set up for the interrupts in the device tree.

That is problematic since these are flagged as rising edge
and an this point the interrupt descriptor is assigned a
rising edge, while the only thing the GPIO/MPP drivers really
do is issue irq_get_irqchip_state() on the line to read it
out and to provide a .to_irq() helper for *other* IRQ
consumers.

If another device tree node tries to flag the same IRQ
for use as something else than rising edge, the kernel
irqdomain core will protest like this:

  type mismatch, failed to map hwirq-NN for <FOO>!

Which is what happens when the device tree defines two
contradictory flags for the same interrupt line.

To work around this and alleviate the problem, assign 0
as flag for the interrupts taken by the PM GPIO and MPP
drivers. This will lead to the flag being unset, and a
second consumer requesting rising, falling, both or level
interrupts will be respected. This is what the qcom-pm*.dtsi
files already do.

Switched to using the symbolic name IRQ_TYPE_NONE so that
we get this more readable.

This misconfiguration was caused by a copy/pasting the
APQ8064 set-up, the latter has been fixed in a separate
patch.

Tested with one of the SPMI GPIOs: after this I can
successfully request one of these GPIOs as falling edge
from the device tree.

Fixes: 0840ea9e ("ARM: dts: add GPIO and MPP to MSM8660 PMIC")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Björn Andersson <bjorn.andersson@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarAndy Gross <andy.gross@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      88277ac7
    • Linus Walleij's avatar
      ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs · 150b065d
      Linus Walleij authored 
      commit ca88696e upstream.

The Qualcomm PMIC GPIO and MPP lines are problematic: the
are fetched from the main MFD driver with platform_get_irq()
which means that at this point they will all be assigned the
flags set up for the interrupts in the device tree.

That is problematic since these are flagged as rising edge
and an this point the interrupt descriptor is assigned a
rising edge, while the only thing the GPIO/MPP drivers really
do is issue irq_get_irqchip_state() on the line to read it
out and to provide a .to_irq() helper for *other* IRQ
consumers.

If another device tree node tries to flag the same IRQ
for use as something else than rising edge, the kernel
irqdomain core will protest like this:

  type mismatch, failed to map hwirq-NN for <FOO>!

Which is what happens when the device tree defines two
contradictory flags for the same interrupt line.

To work around this and alleviate the problem, assign 0
as flag for the interrupts taken by the PM GPIO and MPP
drivers. This will lead to the flag being unset, and a
second consumer requesting rising, falling, both or level
interrupts will be respected. This is what the qcom-pm*.dtsi
files already do.

Switched to using the symbolic name IRQ_TYPE_NONE so that
we get this more readable.

Fixes: bce36046 ("ARM: dts: apq8064: add pm8921 mpp support")
Fixes: 874443fe ("ARM: dts: apq8064: Add pm8921 mfd and its gpio node")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Björn Andersson <bjorn.andersson@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarAndy Gross <andy.gross@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      150b065d
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7