Fix memory leak in set key.

Fixes: eb99cc95 ("mt76: mt7615: introduce mt7663u support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Reschedule runtime-pm delayed work if there is a new activity when ps
delayed work is already scheduled
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Do not schedule ps_work during hw scanning or hw scheduled frequency
scan
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

On usb device rate configuration for sampling is performed relying on a
workqueue since it is not possible to access the device in the interrupt
context. Move the configuration of the probe_rate flag in the workqueue
in order to keep probe sampling in sync with actual rate configuration

Fixes: eb99cc95 ("mt76: mt7615: introduce mt7663u support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt7615_driver_own can fail if it runs too close to mt7615_fw_own. In
order to improve mt7615_driver_own reliability, retry to get runtime-pm
ownership if mt7615_driver_own fails
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce idle-timeout knob in mt7615 debugfs in order to configure the
idle time to switch to low-power state
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to reduce number of received interrupts and power consumption,
enable hw beacon filter if runtime-pm is enabled
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce runtime-pm knob in mt7615 debugfs in order to enable/disable
runtime pm available in offload firmware
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Check MT76_STATE_PM in mt7615_driver_own/mt7615_firmware_own
in order to not requested power ownership if it is already granted
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Double-check if the device is in low-power state before accessing
registermap in mt7615_sta_rate_tbl_update() and in
mt7615_led_set_config()
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Run mt7615_pm_wake()/mt7615_pm_power_save_sched() directly in order to
wake the device from low power state in mt7615_mac_sta_{add,remove}
since they run holding mt76 mutex in common mt76 code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Queue frames pushed by mac80211 running mt7615_tx if the device is
low-power state. Run wake workqueue in order to swicth to full-power
before transmitting pending frames
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Make sure the device is in full-power before pulling frames from
mac80211 queues
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Make sure to run mt7615_mcu_set_roc() holding mt76 mutex in order to
wake the device from low power state and avoid races
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Make sure to run mt7615_mcu_set_wmm() holding mt76 mutex in order to
wake the device from low power state and avoid races
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Make sure to run mt7615_dfs_init_radar_detector in mt7615_regd_notifier
holding mt76 mutex in order to avoid races and set the device in full
power
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Set device in full power before performing hw scan or hw scheduled scan
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Make sure to wake the device in mt7615_pci_suspend in order to properly
configure device registers before suspend
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce mt7615_update_survey utility routine in order to compute
survey stats without waking up the device since it runs holding mt76 lock.
Run mt7615_pm_wake directly in mt7615_update_channel since it can run
with mt76.mutex held if called by mac80211
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce runtime-pm power_save delayed work used to enable
low-power after an inactivity period
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Make sure the device is in full-power before uploading keys to the hw
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Make sure the device is in full-power before reading regs in debugfs
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce mt7615_mutex_{acquire,release} utility routines in order to
switch in full-power/low-power before/after accessing device register-map
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce mt7615_pm_wake utility routine to wake the device from
runtime low-power state (lower-power state is currently supported by
offload firmware for pcie devices).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move mt76 workqueue from usb to common code in order to be reused adding
low-power support for mt7663 chipset
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

According to the vendor sdk, mt7663 does not need to poll register after
firmware own. Since just mt7622 polls status register, set proper
timeout value according to the vendor sdk
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Avoid memcpy in Rx hot path to slightly improve performance.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Enable support for HC-M7662BU1 module on mt76x2u driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fix the following mt7612e hw hangs during suspend/resume reported on
Dell Vostro 3360

mt76x2e 0000:01:00.0: MCU message 2 (seq 11) timed out
mt76x2e 0000:01:00.0: MCU message 30 (seq 12) timed out
mt76x2e 0000:01:00.0: MCU message 30 (seq 13) timed out
mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
mt76x2e 0000:01:00.0: Build: 1
mt76x2e 0000:01:00.0: Build Time: 201507311614____
mt76x2e 0000:01:00.0: Firmware running!
ieee80211 phy0: Hardware restart was requested
mt76x2e 0000:01:00.0: MCU message 2 (seq 1) timed out
mt76x2e 0000:01:00.0: MCU message 30 (seq 2) timed out
mt76x2e 0000:01:00.0: MCU message 30 (seq 3) timed out
mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
mt76x2e 0000:01:00.0: Build: 1
mt76x2e 0000:01:00.0: Build Time: 201507311614____
mt76x2e 0000:01:00.0: Firmware running!
ieee80211 phy0: Hardware restart was requested
mt76x2e 0000:01:00.0: MCU message 31 (seq 5) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 6) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 7) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 8) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 9) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 10) timed out
mt76x2e 0000:01:00.0: MCU message 31 (seq 11) timed out
mt76x2e 0000:01:00.0: Firmware Version: 0.0.00
mt76x2e 0000:01:00.0: Build: 1
mt76x2e 0000:01:00.0: Build Time: 201507311614____
mt76x2e 0000:01:00.0: Firmware running!
ieee80211 phy0: Hardware restart was requested
------------[ cut here ]-----------
CPU: 3 PID: 11956 Comm: kworker/3:1 Not tainted 5.7.0-pf2 #1
Hardware name: Dell Inc.          Vostro 3360/0F5DWF, BIOS A18 09/25/2013
Workqueue: events_freezable ieee80211_restart_work [mac80211]
RIP: 0010:ieee80211_reconfig+0x234/0x1700 [mac80211]
RSP: 0018:ffffb803c23ffdf0 EFLAGS: 00010286
RAX: 00000000fffffff0 RBX: ffff9595a7564900 RCX: 0000000000000008
RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000100
RBP: ffff9595a7ec07e0 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff9595a7ec18d0
R13: 00000000ffffffff R14: 0000000000000000 R15: 00000000fffffff0
FS:  0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0
Call Trace:
 ieee80211_restart_work+0xb7/0xe0 [mac80211]
 process_one_work+0x1d4/0x3c0
 worker_thread+0x228/0x470
 ? process_one_work+0x3c0/0x3c0
 kthread+0x19c/0x1c0
 ? __kthread_init_worker+0x30/0x30
 ret_from_fork+0x35/0x40
wlp1s0:  Failed check-sdata-in-driver check, flags: 0x0
CPU: 3 PID: 11956 Comm: kworker/3:1 Tainted: G        W         5.7.0-pf2 #1
Hardware name: Dell Inc.          Vostro 3360/0F5DWF, BIOS A18 09/25/2013
Workqueue: events_freezable ieee80211_restart_work [mac80211]
RIP: 0010:drv_remove_interface+0x11f/0x130 [mac80211]
RSP: 0018:ffffb803c23ffc80 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9595a7564900 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000082 RDI: 00000000ffffffff
RBP: ffff9595a7ec1930 R08: 00000000000004b6 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000006f08 R12: ffff9595a7ec1000
R13: ffff9595a75654b8 R14: ffff9595a7ec0ca0 R15: ffff9595a7ec07e0
FS:  0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0
Call Trace:
 ieee80211_do_stop+0x5af/0x8c0 [mac80211]
 ieee80211_stop+0x16/0x20 [mac80211]
 __dev_close_many+0xaa/0x120
 dev_close_many+0xa1/0x2b0
 dev_close+0x6d/0x90
 cfg80211_shutdown_all_interfaces+0x71/0xd0 [cfg80211]
 ieee80211_reconfig+0xa2/0x1700 [mac80211]
 ieee80211_restart_work+0xb7/0xe0 [mac80211]
 process_one_work+0x1d4/0x3c0
 worker_thread+0x228/0x470
 ? process_one_work+0x3c0/0x3c0
 kthread+0x19c/0x1c0
 ? __kthread_init_worker+0x30/0x30
 ret_from_fork+0x35/0x40

Fixes: 7bc04215 ("mt76: add driver code for MT76x2e")
Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Sync from SDK to update HE capabilities.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Supports sending a configurable number of packets with a specific rate
and configurable tx power levels / antenna settings, as well as displaying
rx statistics.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This can be used for calibration in the manufacturing process.
It supports sending a configurable number of packets with a specific rate
and configurable tx power levels / antenna settings.
It also supports receiving packets and showing some statistics, including
packet counters and detailed RSSI information.
It will only be compiled in if CONFIG_NL80211_TESTMODE is enabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>

All drivers use this in pretty much the same way. Moving it to core helps with
some checks for the upcoming testmode support
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Now that the bus access functions can use mapping for accessing full
register addresses, use it for WF_PHY registers to keep them constant.
Needed for follow-up work on testmode support
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Includes debugfs files for testing it.
Will be used for testmode support.
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Makes it possible to read/write them via debugfs, similar to mt7603
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Unlike on earlier chips, DMA completion on MT7615 does not imply actually
having sent out any packets.
Since AQL will prevent filling the hardware queues and will only allow more
packets to be passed to the driver after tx completion, it makes much more
sense to schedule the tx tasklet there.
This is also needed for scheduling tx in testmode support
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Rely on mt76x2e prefix in mt76x2/pci.c and align to the rest of
mt76 code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Overwrite hw queue id for non-bufferable management frames if the hw/fw
support always txq (altxq) in order to be in sync with mac txwi code
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is easy to add MU EDCA parameters in the future. This patch
also fixes a wrong cw_min assignment.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>