- 09 May, 2012 37 commits
-
-
Philipp Reisner authored
I.e. in C_WF_REPORT_PARAMS or in C_WF_CONNECTION. Sending may already work in these cstates, but the peer still expects the HandShake / ConnectionFeatures packet. Actually triggered by the Testuite on kugel. Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com>
-
Lars Ellenberg authored
If the asender thread, or request_timer_fn(), or some other part of the code, decided to drop the connection (because of timeout or other), but the receiver just now was processing a P_STATE packet, there was a chance that receive_state() would do a hard state change "re-establishing" an already failed connection without additional handshake. Log excerpt: Remote failed to finish a request within ko-count * timeout peer( Secondary -> Unknown ) conn( Connected -> Timeout ) pdsk( UpToDate -> DUnknown ) asender terminated ... peer( Unknown -> Secondary ) conn( Timeout -> Connected ) pdsk( DUnknown -> UpToDate ) peer_isp( 0 -> 1 ) ... Connection closed peer( Secondary -> Unknown ) conn( Connected -> Unconnected ) pdsk( UpToDate -> DUnknown ) peer_isp( 1 -> 0 ) receiver terminated Impact: while the connection state is erroneously "Connected", requests may be queued and even sent, which would never be acknowledged, and may have been missed by the cleanup. These requests would never be completed. The next drbd_suspend_io() will then lock up, waiting forever for these requests to complete. Fixed in several code paths: Make sure the connection state is NetworkFailure or worse before starting the cleanup in drbd_disconnect(). This should make sure the cleanup won't miss any requests. Disallow receive_state() to "upgrade" the connection state from an error state. This will make sure the "illegal" state transition won't happen. For all connection failure states, relax the safe-guard in sanitize_state() again to silently mask out those state changes (e.g. Timeout -> Connected becomes Timeout -> Timeout). Signed-off-by:
-
Lars Ellenberg authored
drbd_try_clear_on_disk_bm() has a sanity check for the number of blocks left to be resynced (rs_left) in the current resync extent. If it detects a mismatch, it complains, and forces a disconnect using drbd_force_state(mdev, NS(conn, C_DISCONNECTING)); Unfortunately, this may be called while holding the req_lock, and drbd_force_state() want's to aquire that lock itself. Deadlock. Don't force a disconnect, but fix up rs_left by recounting and reassigning the number of dirty blocks in that extent. Signed-off-by:
-
Philipp Reisner authored
This bug might have caused troubles if disk-barriers and the ahead-behind more are enabled at the same time. Signed-off-by:
-
Lars Ellenberg authored
DRBD state changes schedule after_state_ch() actions to a worker thread, which decides on the old and new states of that change, whether to send an informational state update packet (P_STATE) to the peer. If it decides to drbd_send_state(), it would however always send the _curent_ state, which, if a second state change happens before the after_state_ch() of the first ran, may "fast-forward" the peer's view about this node. In most cases that is harmless, but sometimes this can confuse DRBD, for example into not actually starting a necessary resync if you do a very tight detach/attach loop on a Connected Secondary. Fix this by always sending the "new" state of the respective state transition which scheduled this after_state_ch() work. Signed-off-by:
-
Lars Ellenberg authored
When detaching, even cleanly detaching due to administrator request, we always go through D_FAILED before we become D_DISKLESS. Don't let that state change race with an in-flight meta data IO, or that one might think it actually experienced an IO error. Signed-off-by:
-
Philipp Reisner authored
drbd_state_lock() is only there to serialize cluster wide state changes. Testing the local disk state needs to happen while holding the global_state_lock. Otherwise you might see something like this (Oct 6 on kugel) 14:20:24 drbd0: conn( WFSyncUUID -> Connected ) disk( Inconsistent -> Failed ) 14:20:24 drbd0: helper command: /sbin/drbdadm before-resync-target minor-0 exit code 0 (0x0) 14:20:24 drbd0: conn( Connected -> SyncTarget ) disk( Failed -> Inconsistent ) Signed-off-by:
-
Lars Ellenberg authored
We have one pre-allocated page to do certain synchronous meta data IO with, using it is serialized like so: drbd_md_get_buffer(); drbd_md_sync_page_io(); drbd_md_sync_page_io(); ... drbd_md_put_buffer(); In drbd_md_sync_page_io() there is an ASSERT(atomic_read(&mdev->md_io_in_use) == 1); We want to be able to timeout on unresponsive lower level devices, so we can "detach" in that case. Inside drbd_md_sync_page_io() we grab an extra reference, to not have a dangling pointer in case a delayed IO eventually does still complete, even after we "detached" already. We need to put the extra reference before we signal completion from the completion handler, or the second drbd_md_sync_page_io() above may trigger the assert (reference count still 2). Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Andreas Gruenbacher authored
Signed-off-by:
-
Lars Ellenberg authored
With sync-after dependencies, given "lucky" timing of pause/unpause events, and the end of an empty (0 bits set) resync was sometimes not detected on the SyncTarget, leading to a "stalled" SyncSource state. Fixed this by expecting not only "Inconsistent -> UpToDate" but also "Consistent -> UpToDate" transitions for the peer disk state to end a resync. Signed-off-by:
-
Philipp Reisner authored
If we get into the C_BROKEN_PIPE cstate once, the state engine set the thi->t_state of the receiver thread to restarting. But with the while loop in drbdd_init() a new connection gets established. After the call into drbdd() returns immediately since the thi->t_state is not RUNNING. The restart of drbd_init() then resets thi->t_state to RUNNING. I.e. after entering C_BROKEN_PIPE once, the next successful established connection gets wasted. The two parts of the fix: * Do not cause the thread to restart if we detect the issue with the sockets while we are in C_WF_CONNECTION. * Make sure that all actions that would have set us to C_BROKEN_PIPE happen before the state change to C_WF_REPORT_PARAMS. Signed-off-by: -
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Cherry picked form 8.4 Signed-off-by:
-
Philipp Reisner authored
...when the peer has inconsistent data. In that case we failed to clear the susp_nod flag. When the local disk was attached again Signed-off-by:
-
Philipp Reisner authored
Now, the new edition of the clause only fires if a diskless peer gets promoted. This is a fixup for "drbd: Delayed creation of current-UUID". Signed-off-by:
-
Lars Ellenberg authored
Bitmap IO may happend in the context of an application write, in the generic block IO path. We need to use GFP_NOIO. Signed-off-by:
-
Philipp Reisner authored
When the disk-timeout is active, and it expires for a single request, we consider the local disk as D_FAILED. Note: With this change, I made both timeout based state transitions HARD state transitions. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
The last bunch of commits prepared the 'detach from tar pit' feature. With that we can be for long time in disk state FAILED. We need to accept new IO requests during that time. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
The new function drbd_md_get_buffer() aborts waiting for the buffer in case the disk failes in the meantime. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
Philipp Reisner authored
Regression introduced with 8.3.11 commit: drbd: Take a more conservative approach when deciding max_bio_size Never ever tell an older drbd, that we support more than 32KiB in a single data request (packet). Never believe an older drbd, that is supports more than 32KiB in a single data request (packet) Signed-off-by:
-
Philipp Reisner authored
The reason for this change is that, with when doing 'drbdadm invalidate' on a disconnected resource caused an "implicitly set pdsk from UpToDate to DUnknown" message, which was missleading. Signed-off-by:
-
Lars Ellenberg authored
Signed-off-by:
-
Lars Ellenberg authored
Allow up to 300 centi-seconds to be configured for the "ping timeout". There may be setups where heavy congestion, huge buffers, and asymmetric bandwidth limitations may need a "huge" ping-timeout as work-around for "spurious connection loss" problems. Signed-off-by:
-
David Howells authored
Fix warnings of the following nature in the drbd header: In file included from drivers/block/drbd/drbd_bitmap.c:32: drivers/block/drbd/drbd_int.h: In function 'drbd_get_syncer_progress': drivers/block/drbd/drbd_int.h:2234: warning: comparison is always false due to limited range of data where mdev->rs_total (an unsigned long) is being compared to 1ULL << 32, which is always false on a 32-bit machine. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Lars Ellenberg authored
It is not "to small", but "too small". Signed-off-by:
-
Lars Ellenberg authored
For large resync rates, seq_printf_with_thousands_grouping() accidentally only produced Y,000,00Y, instead of the real numbers. Signed-off-by:
-
Philipp Reisner authored
Signed-off-by:
-
- 01 May, 2012 1 commit
-
-
Jens Axboe authored
The core branch is behind driver commits that we want to build on for 3.5, hence I'm pulling in a later -rc. Linux 3.4-rc5 Conflicts: Documentation/feature-removal-schedule.txt Signed-off-by:Jens Axboe <axboe@kernel.dk>
-
- 29 Apr, 2012 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael J. Wysocki: "Fix for an issue causing hibernation to hang on systems with highmem (that practically means i386) due to broken memory management (bug introduced in 3.2, so -stable material) and PM documentation update making the freezer documentation follow the code again after some recent updates." * tag 'pm-for-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Freezer / Docs: Update documentation about freezing of tasks PM / Hibernate: fix the number of pages used for hibernate/thaw buffering
-
