If two threads call bitmap_unplug at the same time, then
one might schedule all the writes, and the other might
decide that it doesn't need to wait.  But really it does.

It rarely hurts to wait when it isn't absolutely necessary,
and the current code doesn't really focus on 'absolutely necessary'
anyway.  So just wait always.

This can potentially lead to data corruption if a crash happens
at an awkward time and data was written before the bitmap was
updated.  It is very unlikely, but this should go to -stable
just to be safe.  Appropriate for any -stable.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@vger.kernel.org (please delay until 3.18 is released)

It has come to my attention (thanks Martin) that 'discard_zeroes_data'
is only a hint.  Some devices in some cases don't do what it
says on the label.

The use of DISCARD in RAID5 depends on reads from discarded regions
being predictably zero.  If a write to a previously discarded region
performs a read-modify-write cycle it assumes that the parity block
was consistent with the data blocks.  If all were zero, this would
be the case.  If some are and some aren't this would not be the case.
This could lead to data corruption after a device failure when
data needs to be reconstructed from the parity.

As we cannot trust 'discard_zeroes_data', ignore it by default
and so disallow DISCARD on all raid4/5/6 arrays.

As many devices are trustworthy, and as there are benefits to using
DISCARD, add a module parameter to over-ride this caution and cause
DISCARD to work if discard_zeroes_data is set.

If a site want to enable DISCARD on some arrays but not on others they
should select DISCARD support at the filesystem level, and set the
raid456 module parameter.
    raid456.devices_handle_discard_safely=Y

As this is a data-safety issue, I believe this patch is suitable for
-stable.
DISCARD support for RAID456 was added in 3.7

Cc: Shaohua Li <shli@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Heinz Mauelshagen <heinzm@redhat.com>
Cc: stable@vger.kernel.org (3.7+)
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Fixes: 620125f2Signed-off-by: NeilBrown <neilb@suse.de>

Pull slave-dmaengine fixes from Vinod Koul:
 "Two small fixes for omap dmaengine driver which fixes cyclic suspend
  and resume"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: omap-dma: Restore the CLINK_CTRL in resume path
  dmaengine: omap-dma: Add memory barrier to dma_resume path

Pull vfs fixes from Al Viro:
 "Assorted fixes + unifying __d_move() and __d_materialise_dentry() +
  minimal regression fix for d_path() of victims of overwriting rename()
  ported on top of that"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: Don't exchange "short" filenames unconditionally.
  fold swapping ->d_name.hash into switch_names()
  fold unlocking the children into dentry_unlock_parents_for_move()
  kill __d_materialise_dentry()
  __d_materialise_dentry(): flip the order of arguments
  __d_move(): fold manipulations with ->d_child/->d_subdirs
  don't open-code d_rehash() in d_materialise_unique()
  pull rehashing and unlocking the target dentry into __d_materialise_dentry()
  ufs: deal with nfsd/iget races
  fuse: honour max_read and max_write in direct_io mode
  shmem: fix nlink for rename overwrite directory

Pull cgroup fixes from Tejun Heo:
 "This is quite late but these need to be backported anyway.

  This is the fix for a long-standing cpuset bug which existed from
  2009.  cpuset makes use of PF_SPREAD_{PAGE|SLAB} flags to modify the
  task's memory allocation behavior according to the settings of the
  cpuset it belongs to; unfortunately, when those flags have to be
  changed, cpuset did so directly even whlie the target task is running,
  which is obviously racy as task->flags may be modified by the task
  itself at any time.  This obscure bug manifested as corrupt
  PF_USED_MATH flag leading to a weird crash.

  The bug is fixed by moving the flag to task->atomic_flags.  The first
  two are prepatory ones to help defining atomic_flags accessors and the
  third one is the actual fix"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: PF_SPREAD_PAGE and PF_SPREAD_SLAB should be atomic flags
  sched: add macros to define bitops for task atomic flags
  sched: fix confusing PFA_NO_NEW_PRIVS constant

Pull ARM SoC fixes from Olof Johansson:
 "Here's our last set of fixes for 3.17.  Most of these are for TI
  platforms, fixing some noisy Kconfig issues, runtime clock and power
  issues on several platforms and NAND timings on DRA7.

  There are also a couple of bug fixes for i.MX, one for QCOM and a
 small fix to avoid section mismatch noise on PXA.

  Diffstat looks large, partially due to some tables being updated and
  thus touching many lines.  The qcom gsbi change also restructures
  clock management a bit and thus touches a bunch of lines.

  All in all, a bit more changes than we'd like at this point, but
  nothing stands out as risky either so it seems like the right thing to
  send it up now instead of holding it to the merge window"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  drivers/soc: qcom: do not disable the iface clock in probe
  ARM: imx: fix .is_enabled() of shared gate clock
  ARM: OMAP3: Fix I/O chain clock line assertion timed out error
  ARM: keystone: dts: fix bindings for pcie and usb clock nodes
  bus: omap_l3_noc: Fix connID for OMAP4
  ARM: DT: imx53: fix lvds channel 1 port
  ARM: dts: cm-t54: fix serial console power supply.
  ARM: dts: dra7-evm: Fix NAND GPMC timings
  ARM: pxa: fix section mismatch warning for pxa_timer_nodt_init
  ARM: OMAP: Fix Kconfig warning for omap1

Pull MIPS fixes from Ralf Baechle:
 "The final round of fixes.  One corner case in the math emulator and
  another one in the mcount function for ftrace"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: mcount: Adjust stack pointer for static trace in MIPS32
  MIPS: Fix MFC1 & MFHC1 emulation for 64-bit MIPS systems

Pull x86 fixes from Ingo Molnar:
 "This has:

   - EFI revert to fix a boot regression
   - early_ioremap() fix for boot failure
   - KASLR fix for possible boot failures
   - EFI fix for corrupted string printing
   - remove a misleading EFI bootup 'failed!' error message

  Unfortunately it's all rather close to the merge window"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Truncate 64-bit values when calling 32-bit OutputString()
  x86/efi: Delete misleading efi_printk() error message
  Revert "efi/x86: efistub: Move shared dependencies to <asm/efi.h>"
  x86/kaslr: Avoid the setup_data area when picking location
  x86 early_ioremap: Increase FIX_BTMAPS_SLOTS to 8

Only exchange source and destination filenames
if flags contain RENAME_EXCHANGE.
In case if executable file was running and replaced by
other file /proc/PID/exe should still show correct file name,
not the old name of the file by which it was replaced.

The scenario when this bug manifests itself was like this:
* ALT Linux uses rpm and start-stop-daemon;
* during a package upgrade rpm creates a temporary file
  for an executable to rename it upon successful unpacking;
* start-stop-daemon is run subsequently and it obtains
  the (nonexistant) temporary filename via /proc/PID/exe
  thus failing to identify the running process.

Note that "long" filenames (> DNAiME_INLINE_LEN) are still
exchanged without RENAME_EXCHANGE and this behaviour exists
long enough (should be fixed too apparently).
So this patch is just an interim workaround that restores
behavior for "short" names as it was before changes
introduced by commit da1ce067 ("vfs: add cross-rename").

See https://lkml.org/lkml/2014/9/7/6 for details.

AV: the comments about being more careful with ->d_name.hash
than with ->d_name.name are from back in 2.3.40s; they
became obsolete by 2.3.60s, when we started to unhash the
target instead of swapping hash chain positions followed
by d_delete() as we used to do when dcache was first
introduced.
Acked-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: da1ce067 "vfs: add cross-rename"
Signed-off-by: Mikhail Efremov <sem@altlinux.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

and do it along with ->d_name.len there
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... renaming it into dentry_unlock_for_move() and making it more
symmetric with dentry_lock_for_move().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

it folds into __d_move() now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... thus making it much closer to (now unreachable, BTW) IS_ROOT(dentry)
case in __d_move().  A bit more and it'll fold in.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

list_del() + list_add() is a slightly pessimised list_move()
list_del() + INIT_LIST_HEAD() is a slightly pessimised list_del_init()

Interleaving those makes the resulting code even worse.  And harder to follow...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

... and get rid of duplicate BUG_ON() there
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The third argument of fuse_get_user_pages() "nbytesp" refers to the number of
bytes a caller asked to pack into fuse request. This value may be lesser
than capacity of fuse request or iov_iter.  So fuse_get_user_pages() must
ensure that *nbytesp won't grow.

Now, when helper iov_iter_get_pages() performs all hard work of extracting
pages from iov_iter, it can be done by passing properly calculated
"maxsize" to the helper.

The other caller of iov_iter_get_pages() (dio_refill_pages()) doesn't need
this capability, so pass LONG_MAX as the maxsize argument here.

Fixes: c9c37e2e ("fuse: switch to iov_iter_get_pages()")
Reported-by: Werner Baumann <werner.baumann@onlinehome.de>
Tested-by: Maxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If overwriting an empty directory with rename, then need to drop the extra
nlink.

Test prog:

#include <stdio.h>
#include <fcntl.h>
#include <err.h>
#include <sys/stat.h>

int main(void)
{
	const char *test_dir1 = "test-dir1";
	const char *test_dir2 = "test-dir2";
	int res;
	int fd;
	struct stat statbuf;

	res = mkdir(test_dir1, 0777);
	if (res == -1)
		err(1, "mkdir(\"%s\")", test_dir1);

	res = mkdir(test_dir2, 0777);
	if (res == -1)
		err(1, "mkdir(\"%s\")", test_dir2);

	fd = open(test_dir2, O_RDONLY);
	if (fd == -1)
		err(1, "open(\"%s\")", test_dir2);

	res = rename(test_dir1, test_dir2);
	if (res == -1)
		err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2);

	res = fstat(fd, &statbuf);
	if (res == -1)
		err(1, "fstat(%i)", fd);

	if (statbuf.st_nlink != 0) {
		fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink);
		return 1;
	}

	return 0;
}
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull input fix from Dmitry Torokhov:
 "A small fixup to i8042 adding Asus X450LCP to the nomux list"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - fix Asus X450LCP touchpad detection

Pull scheduler fixes from Ingo Molnar:
 "A CONFIG_STACK_GROWSUP=y fix, and a hotplug llc CPU mask fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix unreleased llc_shared_mask bit during CPU hotplug
  sched: Fix end_of_stack() and location of stack canary for architectures using CONFIG_STACK_GROWSUP

Merge fixes from Andrew Morton:
 "9 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: softdirty: keep bit when zapping file pte
  fs/cachefiles: add missing \n to kerror conversions
  genalloc: fix device node resource counter
  drivers/rtc/rtc-efi.c: add missing module alias
  mm, slab: initialize object alignment on cache creation
  mm: softdirty: addresses before VMAs in PTE holes aren't softdirty
  ocfs2/dlm: do not get resource spinlock if lockres is new
  nilfs2: fix data loss with mmap()
  ocfs2: free vol_label in ocfs2_delete_osb()

This fixes the same bug as b43790ee ("mm: softdirty: don't forget to
save file map softdiry bit on unmap") and 9aed8614 ("mm/memory.c:
don't forget to set softdirty on file mapped fault") where the return
value of pte_*mksoft_dirty was being ignored.

To be sure that no other pte/pmd "mk" function return values were being
ignored, I annotated the functions in arch/x86/include/asm/pgtable.h
with __must_check and rebuilt.

The userspace effect of this bug is that the softdirty mark might be
lost if a file mapped pte get zapped.
Signed-off-by: Peter Feiner <pfeiner@google.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Jamie Liu <jamieliu@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0227d6ab ("fs/cachefiles: replace kerror by pr_err") didn't
include newline featuring in original kerror definition
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Reported-by: David Howells <dhowells@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>	[3.16.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Decrement the np_pool device_node refcount, which was incremented on
the preceding of_parse_phandle() call.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Without proper alias kernel module is not loaded for rtc-efi driver.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: dann frazier <dannf@dannf.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 45906855 ("mm/sl[aou]b: Common alignment code"), the
"ralign" automatic variable in __kmem_cache_create() may be used as
uninitialized.

The proper alignment defaults to BYTES_PER_WORD and can be overridden by
SLAB_RED_ZONE or the alignment specified by the caller.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=85031Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Andrei Elovikov <a.elovikov@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In PTE holes that contain VM_SOFTDIRTY VMAs, unmapped addresses before
VM_SOFTDIRTY VMAs are reported as softdirty by /proc/pid/pagemap.  This
bug was introduced in commit 68b5a652 ("mm: softdirty: respect
VM_SOFTDIRTY in PTE holes").  That commit made /proc/pid/pagemap look at
VM_SOFTDIRTY in PTE holes but neglected to observe the start of VMAs
returned by find_vma.

Tested:
  Wrote a selftest that creates a PMD-sized VMA then unmaps the first
  page and asserts that the page is not softdirty. I'm going to send the
  pagemap selftest in a later commit.
Signed-off-by: Peter Feiner <pfeiner@google.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Jamie Liu <jamieliu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is a deadlock case which reported by Guozhonghua:
  https://oss.oracle.com/pipermail/ocfs2-devel/2014-September/010079.html

This case is caused by &res->spinlock and &dlm->master_lock
misordering in different threads.

It was introduced by commit 8d400b81 ("ocfs2/dlm: Clean up refmap
helpers").  Since lockres is new, it doesn't not require the
&res->spinlock.  So remove it.

Fixes: 8d400b81 ("ocfs2/dlm: Clean up refmap helpers")
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: joyce.xue <xuejiufei@huawei.com>
Reported-by: Guozhonghua <guozhonghua@h3c.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This bug leads to reproducible silent data loss, despite the use of
msync(), sync() and a clean unmount of the file system.  It is easily
reproducible with the following script:

  ----------------[BEGIN SCRIPT]--------------------
  mkfs.nilfs2 -f /dev/sdb
  mount /dev/sdb /mnt

  dd if=/dev/zero bs=1M count=30 of=/mnt/testfile

  umount /mnt
  mount /dev/sdb /mnt
  CHECKSUM_BEFORE="$(md5sum /mnt/testfile)"

  /root/mmaptest/mmaptest /mnt/testfile 30 10 5

  sync
  CHECKSUM_AFTER="$(md5sum /mnt/testfile)"
  umount /mnt
  mount /dev/sdb /mnt
  CHECKSUM_AFTER_REMOUNT="$(md5sum /mnt/testfile)"
  umount /mnt

  echo "BEFORE MMAP:\t$CHECKSUM_BEFORE"
  echo "AFTER MMAP:\t$CHECKSUM_AFTER"
  echo "AFTER REMOUNT:\t$CHECKSUM_AFTER_REMOUNT"
  ----------------[END SCRIPT]--------------------

The mmaptest tool looks something like this (very simplified, with
error checking removed):

  ----------------[BEGIN mmaptest]--------------------
  data = mmap(NULL, file_size - file_offset, PROT_READ | PROT_WRITE,
              MAP_SHARED, fd, file_offset);

  for (i = 0; i < write_count; ++i) {
        memcpy(data + i * 4096, buf, sizeof(buf));
        msync(data, file_size - file_offset, MS_SYNC))
  }
  ----------------[END mmaptest]--------------------

The output of the script looks something like this:

  BEFORE MMAP:    281ed1d5ae50e8419f9b978aab16de83  /mnt/testfile
  AFTER MMAP:     6604a1c31f10780331a6850371b3a313  /mnt/testfile
  AFTER REMOUNT:  281ed1d5ae50e8419f9b978aab16de83  /mnt/testfile

So it is clear, that the changes done using mmap() do not survive a
remount.  This can be reproduced a 100% of the time.  The problem was
introduced in commit 136e8770 ("nilfs2: fix issue of
nilfs_set_page_dirty() for page at EOF boundary").

If the page was read with mpage_readpage() or mpage_readpages() for
example, then it has no buffers attached to it.  In that case
page_has_buffers(page) in nilfs_set_page_dirty() will be false.
Therefore nilfs_set_file_dirty() is never called and the pages are never
collected and never written to disk.

This patch fixes the problem by also calling nilfs_set_file_dirty() if the
page has no buffers attached to it.

[akpm@linux-foundation.org: s/PAGE_SHIFT/PAGE_CACHE_SHIFT/]
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Tested-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

osb->vol_label is malloced in ocfs2_initialize_super but not freed if
error occurs or during umount, thus causing a memory leak.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: joyce.xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Every mcount() call in the MIPS 32-bit kernel is done as follows:

[...]
move at, ra
jal _mcount
addiu sp, sp, -8
[...]

but upon returning from the mcount() function, the stack pointer
is not adjusted properly. This is explained in details in 58b69401
(MIPS: Function tracer: Fix broken function tracing).

Commit ad8c3969 ("MIPS: Unbreak function tracer for 64-bit kernel.)
fixed the stack manipulation for 64-bit but it didn't fix it completely
for MIPS32.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: <stable@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7792/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Commit bbd426f5 "MIPS: Simplify FP context access" modified the
SIFROMREG & SIFROMHREG macros such that they return unsigned rather
than signed 32b integers. I had believed that to be fine, but
inadvertently missed the MFC1 & MFHC1 cases which write to a struct
pt_regs regs element. On MIPS32 this is fine, but on 64 bit those
saved regs' fields are 64 bit wide. Using unsigned values caused the
32 bit value from the FP register to be zero rather than sign extended
as the architecture specifies, causing incorrect emulation of the
MFC1 & MFHc1 instructions. Fix by reintroducing the casts to signed
integers, and therefore the sign extension.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/7848/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are regression fixes (ACPI hotplug, cpufreq, hibernation, ACPI
  LPSS driver), fixes for stuff that never worked correctly (ACPI GPIO
  support in some cases and a wrong sign of an error code in the ACPI
  core in one place), and one blacklist item for ACPI backlight
  handling.

  Specifics:

   - Revert of a recent hibernation core commit that introduced a NULL
     pointer dereference during resume for at least one user (Rafael J
     Wysocki).

   - Fix for the ACPI LPSS (Low-Power Subsystem) driver to disable
     asynchronous PM callback execution for LPSS devices during system
     suspend/resume (introduced in 3.16) which turns out to break
     ordering expectations on some systems.  From Fu Zhonghui.

   - cpufreq core fix related to the handling of sysfs nodes during
     system suspend/resume that has been broken for intel_pstate since
     3.15 from Lan Tianyu.

   - Restore the generation of "online" uevents for ACPI container
     devices that was removed in 3.14, but some user space utilities
     turn out to need them (Rafael J Wysocki).

   - The cpufreq core fails to release a lock in an error code path
     after changes made in 3.14.  Fix from Prarit Bhargava.

   - ACPICA and ACPI/GPIO fixes to make the handling of ACPI GPIO
     operation regions (which means AML using GPIOs) work correctly in
     all cases from Bob Moore and Srinivas Pandruvada.

   - Fix for a wrong sign of the ACPI core's create_modalias() return
     value in case of an error from Mika Westerberg.

   - ACPI backlight blacklist entry for ThinkPad X201s from Aaron Lu"

* tag 'pm+acpi-3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()"
  gpio / ACPI: Use pin index and bit length
  ACPICA: Update to GPIO region handler interface.
  ACPI / platform / LPSS: disable async suspend/resume of LPSS devices
  cpufreq: release policy->rwsem on error
  cpufreq: fix cpufreq suspend/resume for intel_pstate
  ACPI / scan: Correct error return value of create_modalias()
  ACPI / video: disable native backlight for ThinkPad X201s
  ACPI / hotplug: Generate online uevents for ACPI containers

Pull i2c fixes from Wolfram Sang:
 "This is probably not the kind of pull request you want to see that
  late in the cycle.  Yet, the ACPI refactorization was problematic
  again and caused another two issues which need fixing.  My holidays
  with limited internet (plus travelling) and the developer's illness
  didn't help either :(

  The details:

   - ACPI code was refactored out into a seperate file and as a
     side-effect, the i2c-core module got renamed.  Jean Delvare
     rightfully complained about the rename being problematic for
     distributions.  So, Mika and I thought the least problematic way to
     deal with it is to move all the code back into the main i2c core
     source file.  This is mainly a huge code move with some #ifdeffery
     applied.  No functional code changes.  Our personal tests and the
     testbots did not find problems.  (I was thinking about reverting,
     too, yet that would also have ~800 lines changed)

   - The new ACPI code also had a NULL pointer exception, thanks to
     Peter for finding and fixing it.

   - Mikko fixed a locking problem by decoupling clock_prepare and
     clock_enable.

   - Addy learnt that the datasheet was wrong and reimplemented the
     frequency setup according to the new algorithm.

  - Fan fixed an off-by-one error when copying data

  - Janusz fixed a copy'n'paste bug which gave a wrong error message

  - Sergei made sure that "don't touch" bits are not accessed"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: acpi: Fix NULL Pointer dereference
  i2c: move acpi code back into the core
  i2c: rk3x: fix divisor calculation for SCL frequency
  i2c: mxs: fix error message in pio transfer
  i2c: ismt: use correct length when copy buffer
  i2c: rcar: fix RCAR_IRQ_ACK_{RECV|SEND}
  i2c: tegra: Move clk_prepare/clk_set_rate to probe

Transfer Documentation maintainership to Jiri Kosina.
Thanks, Jiri.

I'll still be reviewing and working on documentation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* pm-cpufreq:
  cpufreq: release policy->rwsem on error
  cpufreq: fix cpufreq suspend/resume for intel_pstate

* pm-sleep:
  Revert "PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()"

* acpi-hotplug:
  ACPI / hotplug: Generate online uevents for ACPI containers

* acpi-scan:
  ACPI / scan: Correct error return value of create_modalias()

* acpi-lpss:
  ACPI / platform / LPSS: disable async suspend/resume of LPSS devices

* acpi-gpio:
  gpio / ACPI: Use pin index and bit length
  ACPICA: Update to GPIO region handler interface.

* acpi-video:
  ACPI / video: disable native backlight for ThinkPad X201s

Pull gpio fixes from Linus Walleij:
 "Two GPIO fixes:

   - GPIO direction flags where handled wrong in the new descriptor-
     based API, so direction changes did not always "take".

   - Fix a handler installation race in the generic GPIO irqchip code"

* tag 'gpio-v3.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Fix potential NULL handler data in chained irqchip handler
  gpio: Fix gpio direction flags not getting set