- 14 May, 2012 26 commits
-
-
Hans Verkuil authored
Rather than checking the priority for each ioctl that needs to, just mark such ioctls in the table and do it only once. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
The tea575x-tuner framework can support the VIDIOC_S_HW_FREQ_SEEK for only some of the tea575x-based boards. Mark this ioctl as invalid if the board doesn't support it. This fixes an issue with S_HW_FREQ_SEEK in combination with priority handling: since the priority check is done first it could return -EBUSY, even though calling the S_HW_FREQ_SEEK ioctl would return -ENOTTY. It should always return ENOTTY in such a case. Signed-off-by:
-
Hans Verkuil authored
Rather than testing whether an ioctl is implemented in the driver or not every time the ioctl is called, do it upfront when the device is registered. This also allows a driver to disable certain ioctls based on the capabilities of the detected board, something you can't do today without creating separate v4l2_ioctl_ops structs for each new variation. For the most part it is pretty straightforward, but for control ioctls a flag is needed since it is possible that you have per-filehandle controls, and that can't be determined upfront of course. Signed-off-by:
-
Hans Verkuil authored
Using the V4L2 core lock is a very robust method that is usually very good at doing the right thing. But some drivers, particularly USB drivers, may want to prevent the core from taking the lock for specific ioctls, particularly buffer queuing ioctls. The reason is that certain commands like S_CTRL can take a long time to process over USB and all the time the core has the lock, preventing VIDIOC_DQBUF from proceeding, even though a frame may be ready in the queue. This introduces unwanted latency. Since the buffer queuing commands often have their own internal lock it is often not necessary to take the core lock. Drivers can now say that they don't want the core to take the lock for specific ioctls. As it is a specific opt-out it makes it clear to the reviewer that those ioctls will need more care when reviewing. Signed-off-by:
-
Sakari Ailus authored
Add driver for SMIA++/SMIA image sensors. The driver exposes the sensor as three subdevs, pixel array, binner and scaler --- in case the device has a scaler. Currently it relies on the board code for external clock handling. There is no fast way out of this dependency before the ISP drivers (omap3isp) among others will be able to export that clock through the clock framework instead. Signed-off-by:
Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Sakari Ailus authored
Calculate PLL configuration based on input data: sensor configuration, board properties and sensor-specific limits. [mchehab@redhat.com: Fix a Kconfig conflict affecting APTINA_PLL] Signed-off-by:
-
Sakari Ailus authored
Perform CCDC link validation in ccdc_link_validate() instead of isp_video_validate_pipeline(). Also perform maximum data rate check in isp_video_check_external_subdevs(). Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
-
Sakari Ailus authored
Use default link validation for ccp2, csi2, preview and resizer. On ccp2, csi2 and ccdc we also collect information on external subdevs as one may be connected to those entities. Signed-off-by:
-
Sakari Ailus authored
Access pipe->external_rate instead of isp_ccdc.vpcfg.pixelclk. Also remove means to set the value for isp_ccdc_vpcfg.pixelclk. Signed-off-by:
-
Sakari Ailus authored
isp_video_check_external_subdevs() will retrieve external subdev's bits-per-pixel and pixel rate for the use of other ISP subdevs at streamon time. isp_video_check_external_subdevs() is called after pipeline validation. Signed-off-by:
-
Sakari Ailus authored
Add pointer to external subdev, pixel rate of the external subdev and bpp of the format to struct isp_pipeline. Signed-off-by:
-
Sakari Ailus authored
Collect information on entities in pipeline in isp_video_far_end(), outside pipeline validation. As this causes the function to have side effects, rename the function accordingly. Signed-off-by:
-
Sakari Ailus authored
Add lane configuration (order of clock and data lane) to platform data on both CCP2 and CSI-2. Signed-off-by:
-
Sakari Ailus authored
Since media_entity_pipeline_start() now does link validation, it may actually fail. Perform the error handling. Signed-off-by:
-
Sakari Ailus authored
The clock rate for l3_ick will soon be read during pipeline validation which is now part of media_entity_pipeline_start(). For that reason we set constraints earlier on. Signed-off-by:
-
Sakari Ailus authored
XCLK definitions are often required by the board code. Move them to public include file. Signed-off-by:
-
Sakari Ailus authored
This also prevents accessing NULL pointer in csi2_try_format(). Signed-off-by:
-
Sakari Ailus authored
Allow choosing the lock used by the control handler. This may be handy sometimes when a driver providing multiple subdevs does not want to use several locks to serialise its functions. Signed-off-by:
-
Sakari Ailus authored
v4l2_subdev_link_validate() is the default op for validating a link. In V4L2 subdev context, it is used to call a pad op which performs the proper link check without much extra work. Signed-off-by:
-
Sakari Ailus authored
Document that format related configuration is done through pad ops in case the driver does use the media framework. Signed-off-by:
-
Sakari Ailus authored
The purpose of the link_validate() op is to allow an entity driver to ensure that the properties of the pads at the both ends of the link are suitable for starting the pipeline. link_validate is called on sink pads on active links which belong to the active part of the graph. Signed-off-by:
-
Sakari Ailus authored
Add three other colour orders for 10-bit to 8-bit DPCM compressed raw bayer pixel formats. Signed-off-by:
-
Sakari Ailus authored
Document guidelines how 4CC codes should be named. Only raw bayer is included currently. Other formats should be documented later on. Signed-off-by:
-
Sakari Ailus authored
Add control class for image processing controls. The control class deals with controls processing image, for example digital gain or noise filtering, which can be present in any part of the pipeline. Signed-off-by:
-
Sakari Ailus authored
Add image source control class. This control class is intended to contain low level controls which deal with control of the image capture process --- the A/D converter in image sensors, for example. Signed-off-by:
-
Sakari Ailus authored
V4L2 uses the enum type in IOCTL arguments in IOCTLs that were defined until the use of enum was considered less than ideal. Recently Rémi Denis-Courmont brought up the issue by proposing a patch to convert the enums to unsigned: <URL:http://www.spinics.net/lists/linux-media/msg46167.html> This sparked a long discussion where another solution to the issue was proposed: two sets of IOCTL structures, one with __u32 and the other with enums, and conversion code between the two: <URL:http://www.spinics.net/lists/linux-media/msg47168.html> Both approaches implement a complete solution that resolves the problem. The first one is simple but requires assuming enums and __u32 are the same in size (so we won't break the ABI) while the second one is more complex and less clean but does not require making that assumption. The issue boils down to whether enums are fundamentally different from __u32 or not, and can the former be substituted by the latter. During the discussion it was concluded that the __u32 has the same size as enums on all archs Linux is supported: it has not been shown that replacing those enums in IOCTL arguments would break neither source or binary compatibility. If no such reason is found, just replacing the enums with __u32s is the way to go. This is what this patch does. This patch is slightly different from Remi's first RFC (link above): it uses __u32 instead of unsigned and also changes the arguments of VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY. Signed-off-by:
Rémi Denis-Courmont <remi@remlab.net> Signed-off-by:
-
- 08 May, 2012 14 commits
-
-
H Hartley Sweeten authored
The function vb2_dma_contig_vaddr returns a void * not an integer. Quiets the sparse noise: warning: Using plain integer as NULL pointer Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Pawel Osciak <pawel@osciak.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
H Hartley Sweeten authored
Include the header to pickup the definitions of the exported symbols. Quiets the following sparse warnings: warning: symbol 'vb2_dma_contig_memops' was not declared. Should it be static? warning: symbol 'vb2_dma_contig_init_ctx' was not declared. Should it be static? warning: symbol 'vb2_dma_contig_cleanup_ctx' was not declared. Should it be static? Signed-off-by:
-
Andy Shevchenko authored
There is no needs to keep .remove under .exit.text. This driver is for a standalone chip that could be on any board and connected to any i2c bus. At the same time we don't need to keep the as3645a_probe() after initializing the device. Therefore we mark it and relevant functions with __devinit tag. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The mf_low value must be a multiple of mf_inc. Round it up to the nearest mf_inc multiple after computing it. Signed-off-by:
-
Laurent Pinchart authored
Support for the legacy crop API is emulated in the subdev core. Signed-off-by:
-
Laurent Pinchart authored
Support for the legacy crop API is emulated in the subdev core. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Configure CFA interpolation automatically based on the input format. Signed-off-by:
-
Laurent Pinchart authored
For consistency reasons, rename the last remaining occurences of rgb_to_ycbcr to csc (color space conversion). Signed-off-by:
-
Laurent Pinchart authored
When applications modify preview engine parameters, the new values are applied to the hardware by the preview engine interrupt handler during vertical blanking. If the parameters are being changed when the interrupt handler is called, it just delays applying the parameters until the next frame. If an application modifies the parameters for every frame, and the preview engine interrupt is triggerred synchronously, the parameters are never applied to the hardware. Fix this by storing new parameters in a shadow copy, and switch the active parameters with the shadow values atomically. Signed-off-by:
-
Laurent Pinchart authored
Instead of using a large switch/case statement to return offsets to and sizes of individual preview engine parameters in the parameters and configuration structures, store the information in the update_attrs table and use it at runtime. Signed-off-by:
-
Laurent Pinchart authored
Rename the blk_adj and rgb2ycbcr fields to blkadj and csc respectively. Signed-off-by:
-
Laurent Pinchart authored
The feature_bit is always equal to 1 << array position, remove it and compute the value dynamically. Signed-off-by:
-
