The table of offsets to real-mode hcall handlers in book3s_hv_rmhandlers.S
can contain negative values, if some of the handlers end up before the
table in the vmlinux binary.  Thus we need to use a sign-extending load
to read the values in the table rather than a zero-extending load.
Without this, the host crashes when the guest does one of the hcalls
with negative offsets, due to jumping to a bogus address.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

This corrects the usage of the tlbie (TLB invalidate entry) instruction
in HV KVM.  The tlbie instruction changed between PPC970 and POWER7.
On the PPC970, the bit to select large vs. small page is in the instruction,
not in the RB register value.  This changes the code to use the correct
form on PPC970.

On POWER7 we were calculating the AVAL (Abbreviated Virtual Address, Lower)
field of the RB value incorrectly for 64k pages.  This fixes it.

Since we now have several cases to handle for the tlbie instruction, this
factors out the code to do a sequence of tlbies into a new function,
do_tlbies(), and calls that from the various places where the code was
doing tlbie instructions inline.  It also makes kvmppc_h_bulk_remove()
use the same global_invalidates() function for determining whether to do
local or global TLB invalidations as is used in other places, for
consistency, and also to make sure that kvm->arch.need_tlb_flush gets
updated properly.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

Both RMA and hash page table request will be a multiple of 256K. We can use
a chunk size of 256K to track the free/used 256K chunk in the bitmap. This
should help to reduce the bitmap size.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

Older version of power architecture use Real Mode Offset register and Real Mode Limit
Selector for mapping guest Real Mode Area. The guest RMA should be physically
contigous since we use the range when address translation is not enabled.

This patch switch RMA allocation code to use contigous memory allocator. The patch
also remove the the linear allocator which not used any more
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Powerpc architecture uses a hash based page table mechanism for mapping virtual
addresses to physical address. The architecture require this hash page table to
be physically contiguous. With KVM on Powerpc currently we use early reservation
mechanism for allocating guest hash page table. This implies that we need to
reserve a big memory region to ensure we can create large number of guest
simultaneously with KVM on Power. Another disadvantage is that the reserved memory
is not available to rest of the subsystems and and that implies we limit the total
available memory in the host.

This patch series switch the guest hash page table allocation to use
contiguous memory allocator.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

We don't emulate breakpoints yet, so just ignore reads and writes
to / from DABR.

This fixes booting of more recent Linux guest kernels for me.
Reported-by: Nello Martuscielli <ppc.addon@gmail.com>
Tested-by: Nello Martuscielli <ppc.addon@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

Add prerequisite patch for CMA RMA allocation patches

Some userspaces do not preserve unusable property. Since usable
segment has to be present according to VMX spec we can use present
property to amend userspace bug by making unusable segment always
nonpresent. vmx_segment_access_rights() already marks nonpresent segment
as unusable.

Cc: stable@vger.kernel.org # 3.9+
Reported-by: Stefan Pietsch <stefan.pietsch@lsexperts.de>
Tested-by: Stefan Pietsch <stefan.pietsch@lsexperts.de>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Finally plug KVM/arm64 into the config system, making it possible
to enable KVM support on AArch64 CPUs.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull KVM fixes from Paolo Bonzini:
 "On the x86 side, there are some optimizations and documentation
  updates.  The big ARM/KVM change for 3.11, support for AArch64, will
  come through Catalin Marinas's tree.  s390 and PPC have misc cleanups
  and bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (87 commits)
  KVM: PPC: Ignore PIR writes
  KVM: PPC: Book3S PR: Invalidate SLB entries properly
  KVM: PPC: Book3S PR: Allow guest to use 1TB segments
  KVM: PPC: Book3S PR: Don't keep scanning HPTEG after we find a match
  KVM: PPC: Book3S PR: Fix invalidation of SLB entry 0 on guest entry
  KVM: PPC: Book3S PR: Fix proto-VSID calculations
  KVM: PPC: Guard doorbell exception with CONFIG_PPC_DOORBELL
  KVM: Fix RTC interrupt coalescing tracking
  kvm: Add a tracepoint write_tsc_offset
  KVM: MMU: Inform users of mmio generation wraparound
  KVM: MMU: document fast invalidate all mmio sptes
  KVM: MMU: document fast invalidate all pages
  KVM: MMU: document fast page fault
  KVM: MMU: document mmio page fault
  KVM: MMU: document write_flooding_count
  KVM: MMU: document clear_spte_count
  KVM: MMU: drop kvm_mmu_zap_mmio_sptes
  KVM: MMU: init kvm generation close to mmio wrap-around value
  KVM: MMU: add tracepoint for check_mmio_spte
  KVM: MMU: fast invalidate all mmio sptes
  ...

Merge tag 'stable/for-linus-3.11-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bugfixes from Konrad Rzeszutek Wilk:
 - Fix memory leak when CPU hotplugging.
 - Compile bugs with various #ifdefs
 - Fix state changes in Xen PCI front not dealing well with new
   toolstack.
 - Cleanups in code (use pr_*, fix 80 characters splits, etc)
 - Long standing bug in double-reporting the steal time

* tag 'stable/for-linus-3.11-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/time: remove blocked time accounting from xen "clockchip"
  xen: Convert printks to pr_<level>
  xen: ifdef CONFIG_HIBERNATE_CALLBACKS xen_*_suspend
  xen/pcifront: Deal with toolstack missing 'XenbusStateClosing' state.
  xen/time: Free onlined per-cpu data structure if we want to online it again.
  xen/time: Check that the per_cpu data structure has data before freeing.
  xen/time: Don't leak interrupt name when offlining.
  xen/time: Encapsulate the struct clock_event_device in another structure.
  xen/spinlock: Don't leak interrupt name when offlining.
  xen/smp: Don't leak interrupt name when offlining.
  xen/smp: Set the per-cpu IRQ number to a valid default.
  xen/smp: Introduce a common structure to contain the IRQ name and interrupt line.
  xen/smp: Coalesce the free_irq calls in one function.
  xen-pciback: fix error return code in pcistub_irq_handler_switch()

Pull AMD EDAC update from Borislav Petkov:
 "Add MCE signatures for family 0x15, models 30-3f"

* tag 'edac_for_3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, MCE, AMD: Add an MCE signature for new Fam15h models
  EDAC: Replace strict_strtoul() with kstrtoul()

Merge tags 'modules-next-for-linus' and 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull trivial module and virtio fixes from Rusty Russell.

Apparently these were meant for 3.10, but came in after the release.

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost.c: Add .text.unlikely to TEXT_SECTIONS

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio: remove virtqueue_add_buf().
  lguest: rename i386_head.S
  virtio_blk: Add missing 'static' qualifiers
  virtio: console: Add emergency writeonly register to config space
  virtio_pci: better macro exported in uapi

Pull regulator updates from Mark Brown:
 "Very quiet release here, as well as the usual driver specific updates
  only a couple of new things:

   - New drivers for TI ABB LDOs and MAX77693 PMICs
   - Support for enabling bypass mode support via device tree"

* tag 'regulator-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
  regulator: max77693: Remove NULL test for rmatch[i].init_data
  regulator: max77693: Fix trivial typo
  regulator: ab8500-ext: Staticize local symbols
  regulator: max77693: Add max77693 regualtor driver.
  regulator: max8973: fix a typo in documentation
  regulator: max8973: initial DT support
  regulators: max8973: fix multiple instance support
  regulator: of: Added a property to indicate bypass mode support
  regulator: ti-abb: Convert to use devm_ioremap_resource
  regulator: tps62360: Fix crash in i2c_driver .probe
  regulator: ab8500: Provide supply names for the AUX regulators
  regulator: ab8500-ext: Enable for Device Tree
  regulator: ab8500-ext: Register as a device in its own right
  regulator: ab8500-ext: Provide a set_voltage call-back operation
  regulator: ab8500: Ensure AB8500 external registers are probed first
  regulator: core: add regulator_get_linear_step()
  regulator: lp397x: use devm_kzalloc() to make cleanup paths simpler
  regulator: lp872x: support the device tree feature
  regulator: Remove unnecessary include of linux/delay.h from regulator drivers
  regulator: isl6271a: Use NULL instead of 0
  ...

Pull clock framework updates from Mike Turquette:
 "The common clock framework changes for 3.11 include new clock drivers
  across several different platforms and architectures, fixes to
  existing drivers, a MAINTAINERS file fix and improvements to the basic
  clock types that allow them to be of use to more platforms than before.

  Only a few fixes to the core framework are included with most all of
  the changes landing in the various clock drivers themselves."

* tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux: (55 commits)
  clk: tegra: fix ifdef for tegra_periph_reset_assert inline
  clk: tegra: provide tegra_periph_reset_assert alternative
  clk: exynos4: Fix clock aliases for cpufreq related clocks
  clk: samsung: Add MUX_FA macro to pass flag and alias
  clk: add support for Rockchip gate clocks
  clk: vexpress: Make the clock drivers directly available for arm64
  clk: vexpress: Use full node name to identify individual clocks
  clk: tegra: T114: add DFLL DVCO reset control
  clk: tegra: T114: add DFLL source clocks
  clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLL
  clk: gate: add CLK_GATE_HIWORD_MASK
  clk: divider: add CLK_DIVIDER_HIWORD_MASK flag
  clk: mux: add CLK_MUX_HIWORD_MASK
  clk: Always notify whole subtree when reparenting
  MAINTAINERS: make drivers/clk entry match subdirs
  clk: honor CLK_GET_RATE_NOCACHE in clk_set_rate
  clk: use clk_get_rate() for debugfs
  clk: tegra: Use override bits when needed
  clk: tegra: override bits for Tegra30 PLLM
  clk: tegra: override bits for Tegra114 PLLM
  ...

Pull spi updates from Mark Brown:
 "A fairly quiet release for the SPI subsystem, the standout changes
  being:

   - Core support for implementing bits per word constraints implemented
     by Stephen Warren, factoring some code out of drivers.

   - Addition of polling mode support for the s3c64xx driver as some
     newer Exynos systems have taken the unusual step of removing
     interrupt support.

   - Use of the in-IP FIFO and generic dmaengine support for the OMAP2
     driver, providing improved performance.

   - Conversion of the mpc512x driver to use the core message queue
     infrastructure.

  The nicest thing being that all the factoring out into common code
  leads to a negative diffstat overall."

* tag 'spi-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (42 commits)
  spi/s3c64xx: Rely on the compiler eliminating the OF ID table
  spi: s3c64xx: Added support for exynos5440 spi
  spi: s3c64xx: Added provision for dedicated cs pin
  spi: omap2-mcspi: add generic DMA request support to the DT binding
  spi: omap2-mcspi: convert to dma_request_slave_channel_compat()
  spi/s3c64xx: Make wait_for_timeout() function name less generic
  spi: s3c64xx: added support for polling mode
  spi: omap2-mcspi: Add FIFO buffer support
  spi: omap2-mcspi: Move bytes per word calculation to the function
  spi: spi-xilinx: cleanup a check in xilinx_spi_txrx_bufs()
  spi: spi-nuc900: Remove redundant platform_set_drvdata()
  spi: spi-fsl-lib: Make mpc8xxx_spi_work static
  spi: spi-topcliff-pch: Fix sparse warnings
  spi: spi-xilinx: Remove redundant platform_set_drvdata()
  spi: spi-xilinx: Add run run-time endian detection
  spi: mpc512x: use the SPI subsystem's message queue
  spi: mpc512x: improve throughput in the RX/TX func
  spi: mpc512x: minor prep before feature change
  spi: atmel: convert to dma_request_slave_channel_compat()
  spi: sirf: avoid uninitialized-use warning
  ...

Merge tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:

 - A large slew of improvements of the Genric pin configuration support,
   and deployment in four different platforms: Rockchip, Super-H PFC,
   ABx500 and TZ1090.  Support BIAS_BUS_HOLD, get device tree parsing
   and debugfs support into shape.

 - We also have device tree support with generic naming conventions for
   the generic pin configuration.

 - Delete the unused and confusing direct pinconf API.  Now state
   transitions is *the* way to control pins and multiplexing.

 - New drivers for Rockchip, TZ1090, and TZ1090 PDC.

 - Two pin control states related to power management are now handled in
   the device core: "sleep" and "idle", removing a lot of boilerplate
   code in drivers.  We do not yet know if this is the final word for
   pin PM, but it already make things a lot easier to handle.

 - Handle sparse GPIO ranges passing a list of disparate pins, and
   utilize these in the new BayTrail (x86 Atom SoC) driver.

 - Make the sunxi (AllWinner) driver handle external interrupts.

 - Make it possible for pinctrl-single to handle the case where several
   pins are managed by a single register, and augment it to handle sleep
   modes.

 - Cleanups and improvements for the abx500 drivers.

 - Move Sirf pin control drivers to their own directory, support
   save/restore of context and add support for the SiRFatlas6 SoC.

 - PMU muxing for the Dove pinctrl driver.

 - Finalization and support for VF610 in the i.MX6 pinctrl driver.

 - Smoothen out various Exynos rough edges.

 - Generic cleanups of various kinds.

* tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe()
  pinctrl: remove bindings for pinconf options needing more thought
  pinctrl: remove slew-rate parameter from tz1090
  pinctrl: set unit for debounce time pinconfig to usec
  pinctrl: more clarifications for generic pull configs
  pinctrl: rip out the direct pinconf API
  pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver
  pinctrl-tz1090: add TZ1090 pinctrl driver
  pinctrl: samsung: Staticize drvdata_list
  pinctrl: rockchip: Add missing irq_gc_unlock() call before return error
  pinctrl: abx500: rework error path
  pinctrl: abx500: suppress hardcoded value
  pinctrl: abx500: factorize code
  pinctrl: abx500: fix abx500_gpio_get()
  pinctrl: abx500: fix abx500_pin_config_set()
  pinctrl: abx500: Add device tree support
  sh-pfc: Guard DT parsing with #ifdef CONFIG_OF
  pinctrl: add Intel BayTrail GPIO/pinctrl support
  pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc
  pinctrl: Staticize local symbols
  ...

Conflicts:
	drivers/net/ethernet/ti/davinci_mdio.c
	drivers/pinctrl/Makefile

Pull regmap updates from Mark Brown:
 "A small but useful set of regmap updates this time around:

   - An abstraction for bitfields within a register map contributed by
     Srinivas Kandagatla, allowing drivers to cope more easily when
     hardware designers randomly move things about (mainly when talking
     to things like system controllers).

   - Changes from Lars-Peter Clausen to allow the MMIO regmap to be used
     from hard IRQ context.

   - Small improvements to the cache infrastructure and performance,
     including a default cache sync operation so now all regmaps can
     sync easily.

  There's also a pinctrl driver making use of the new bitfield API,
  merged here for dependency reasons.  There will be a simple add/add
  conflict with the pinctrl tree as a result."

* tag 'regmap-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  pinctrl: st: Remove unnecessary use of of_match_ptr macro
  pinctrl: st: fix return value check
  pinctrl: st: Add pinctrl and pinconf support.
  regmap: debugfs: Suppress cache for partial register files
  regmap: Add regmap_field APIs
  regmap: core: Cache all registers by default when cache is enabled
  regmap: Implemented default cache sync operation
  regmap: Make regmap-mmio usable from atomic contexts
  regmap: regcache: Fixup locking for custom lock callbacks
  regmap: debugfs: Fix return from regmap_debugfs_get_dump_start
  regmap: debugfs: Don't mark lockdep as broken due to debugfs write
  regmap: rbtree: Use range information to allocate nodes
  regmap: rbtree: Factor out node allocation
  regmap: Make regmap_check_range_table() a public API
  regmap: Add support for discarding parts of the register cache

Pull GPIO updates from Linus Walleij:
 "Here is a batch of GPIO changes for v3.11.  I have agreed with Grant
  to take care of the pull requests for this development cycle.

  No special things are happening in the GPIO tree this time (nice with
  some calm) and I have been extra careful to do regression builds and
  it's well boiled in -next.

  GPIO changes for the v3.11 development cycle:
   - Incremental development for the Langwell (Atom SoC), Xilinx, ICH
     and RCAR drivers.
   - Cleanups from Jingoo Han, Axel Lin, Wei Jongjun, Wolfram Sang,
     Tushar Behera, Sachin Kamat and Yijing Wang"

* tag 'gpio-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (35 commits)
  Gpio/trivial: replace numeric with standard PM state macros
  gpiolib: remove warnning of allocations with IRQs disabled
  gpio: grgpio: Staticize local symbols
  gpio-langwell: remove Withney point support
  gpio: ich: add GPO_BLINK support
  gpio-sta2x11: Convert to use devm_ioremap_resource
  gpio_msm: Convert to use devm_ioremap_resource
  gpio-rcar: Use OUTDT when reading GPIOs configured as output
  gpio-sta2x11: Fix potential NULL pointer dereference
  gpio/omap: omap_gpio_init_context stub must be inline
  gpio: msm-v1: Remove errant __devinit to fix compile
  gpio: devres: make comments proper
  GPIO: xilinx: Enable driver for Xilinx zynq
  DT: Add documentation for gpio-xilinx
  GPIO: xilinx: Use BIT macro
  GPIO: xilinx: Use __raw_readl/__raw_writel IO functions
  GPIO: xilinx: Add support for dual channel
  GPIO: xilinx: Simplify driver probe function
  gpio: sx150x: convert to use devm_* functions
  MAINTAINERS: add linux-gpio mailing list
  ...

Pull thermal power-limit update from Tony Luck:
 "Thermal limit warnings are too scary and cause unnecessary concern"

* tag 'please-pull-mce-therm' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  x86 thermal: Disable power limit notification interrupt by default
  x86 thermal: Delete power-limit-notification console messages

Merge tag 'please-pull-root_bus_hotplug' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux

Pull ia64 IOH hotplug fixes from Tony Luck:
 "Series to fix IOH hotplug in ia64"

* tag 'please-pull-root_bus_hotplug' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  PCI: Replace printks with appropriate pr_*()
  PCI/IA64: introduce probe_pci_root_info() to manage _CRS resource
  PCI/IA64: Add host bridge resource release for _CRS path
  PCI/IA64: fix memleak for create pci root bus fail
  PCI/IA64: Allocate pci_root_info instead of using stack
  PCI/IA64: embed pci hostbridge resources into pci_root_info
  PCI/IA64: SN: use normal resource instead of pci_window
  PCI/IA64: SN: remove sn_pci_window_fixup()

Pull pstore update from Tony Luck:
 "Fixes for pstore for 3.11 merge window"

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  efivars: If pstore_register fails, free unneeded pstore buffer
  acpi: Eliminate console msg if pstore.backend excludes ERST
  pstore: Return unique error if backend registration excluded by kernel param
  pstore: Fail to unlink if a driver has not defined pstore_erase
  pstore/ram: remove the power of buffer size limitation
  pstore/ram: avoid atomic accesses for ioremapped regions
  efi, pstore: Cocci spatch "memdup.spatch"

Pull misc ia64 updates from Tony Luck:
 "Miscellaneous ia64 changes for 3.11 merge window"

* tag 'please-pull-misc-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Delete __cpuinit usage from all ia64 users
  [IA64] hpsim: Fix check for overlong simscsi prefix.
  [IA64] pci: Remove unused fallback_dev
  [IA64] perfmon: Use %*phD specifier to dump small buffers
  [IA64] Fix trap #45 handling

Pull "exotic" arch fixes from Geert Uytterhoeven:
 "This is a collection of several exotic architecture fixes, and a few
  other fixes for issues that were detected while doing the former"

* 'exotic-arch-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (35 commits)
  lib: Move fonts from drivers/video/console/ to lib/fonts/
  console/font: Refactor font support code selection logic
  Revert "staging/solo6x10: depend on CONFIG_FONTS"
  input: cros_ec_keyb_clear_keyboard() depends on CONFIG_PM_SLEEP
  score: Wire up asm-generic/xor.h
  score: Remove unneeded <asm/dma-mapping.h>
  openrisc: Wire up asm-generic/xor.h
  h8300/boot: Use POSIX "$((..))" instead of bashism "$[...]"
  h8300: Mark H83002 and H83048 CPU support broken
  h8300: Switch h8300 to drivers/Kconfig
  h8300: Limit timer channel ranges in Kconfig
  h8300: Wire up asm-generic/xor.h
  h8300: Fill the system call table using a CALL() macro
  h8300: Fix <asm/tlb.h>
  h8300: Hardcode symbol prefixes in asm sources
  h8300: add missing definition for read_barries_depends()
  frv: head.S - Remove commented-out initialization code
  cris: Wire up asm-generic/vga.h
  parport: disable PC-style parallel port support on cris
  console: Disable VGA text console support on cris
  ...

Pull m68k updates from Geert Uytterhoeven.

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/q40: Enable PC parallel port in defconfig
  m68k/q40: Undefine insl/outsl before redefining them
  m68k/uaccess: Fix asm constraints for userspace access
  swim: Release memory region after incorrect return/goto
  m68k/irq: Vector ints need a valid interrupt handler
  m68k/math-emu: unsigned issue, 'unsigned long' will never be less than zero
  m68k: remove CONFIG_EARLY_PRINTK dependency on CONFIG_EMBEDDED, default to n
  m68k/sun3: remove inline marking of EXPORT_SYMBOL functions
  [SCSI] a3000: use module_platform_driver_probe()
  [SCSI] a4000t: use module_platform_driver_probe()
  m68k: Remove inline strcpy() and strcat() implementations

Pull first batch of ARC changes from Vineet Gupta:
 "There's a second bunch to follow next week - which depends on commits
  on other trees (irq/net).  I'd have preferred the accompanying ARC
  change via respective trees, but it didn't workout somehow.

  Highlights of changes:

   - Continuation of ARC MM changes from 3.10 including

       zero page optimization
       Setting pagecache pages dirty by default
       Non executable stack by default
       Reducing dcache flushes for aliasing VIPT config

   - Long overdue rework of pt_regs machinery - removing the unused word
     gutters and adding ECR register to baseline (helps cleanup lot of
     low level code)

   - Support for ARC gcc 4.8

   - Few other preventive fixes, cosmetics, usage of Kconfig helper..

  The diffstat is larger than normal primarily because of arcregs.h
  header split as well as beautification of macros in entry.h"

* tag 'arc-v3.11-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (32 commits)
  ARC: warn on improper stack unwind FDE entries
  arc: delete __cpuinit usage from all arc files
  ARC: [tlb-miss] Fix bug with CONFIG_ARC_DBG_TLB_MISS_COUNT
  ARC: [tlb-miss] Extraneous PTE bit testing/setting
  ARC: Adjustments for gcc 4.8
  ARC: Setup Vector Table Base in early boot
  ARC: Remove explicit passing around of ECR
  ARC: pt_regs update #5: Use real ECR for pt_regs->event vs. synth values
  ARC: stop using pt_regs->orig_r8
  ARC: pt_regs update #4: r25 saved/restored unconditionally
  ARC: K/U SP saved from one location in stack switching macro
  ARC: Entry Handler tweaks: Simplify branch for in-kernel preemption
  ARC: Entry Handler tweaks: Avoid hardcoded LIMMS for ECR values
  ARC: Increase readability of entry handlers
  ARC: pt_regs update #3: Remove unused gutter at start of callee_regs
  ARC: pt_regs update #2: Remove unused gutter at start of pt_regs
  ARC: pt_regs update #1: Align pt_regs end with end of kernel stack page
  ARC: pt_regs update #0: remove kernel stack canary
  ARC: [mm] Remove @write argument to do_page_fault()
  ARC: [mm] Make stack/heap Non-executable by default
  ...

Pull s390 updates from Martin Schwidefsky:
 "This is the bulk of the s390 patches for the 3.11 merge window.

  Notable enhancements are: the block timeout patches for dasd from
  Hannes, and more work on the PCI support front.  In addition some
  cleanup and the usual bug fixing."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits)
  s390/dasd: Fail all requests when DASD_FLAG_ABORTIO is set
  s390/dasd: Add 'timeout' attribute
  block: check for timeout function in blk_rq_timed_out()
  block/dasd: detailed I/O errors
  s390/dasd: Reduce amount of messages for specific errors
  s390/dasd: Implement block timeout handling
  s390/dasd: process all requests in the device tasklet
  s390/dasd: make number of retries configurable
  s390/dasd: Clarify comment
  s390/hwsampler: Updated misleading member names in hws_data_entry
  s390/appldata_net_sum: do not use static data
  s390/appldata_mem: do not use static data
  s390/vmwatchdog: do not use static data
  s390/airq: simplify adapter interrupt code
  s390/pci: remove per device debug attribute
  s390/dma: remove gratuitous brackets
  s390/facility: decompose test_facility()
  s390/sclp: remove duplicated include from sclp_ctl.c
  s390/irq: store interrupt information in pt_regs
  s390/drivers: Cocci spatch "ptr_ret.spatch"
  ...

Pull ARM64 updates from Catalin Marinas:
 "Main features:
   - KVM and Xen ports to AArch64
   - Hugetlbfs and transparent huge pages support for arm64
   - Applied Micro X-Gene Kconfig entry and dts file
   - Cache flushing improvements

  For arm64 huge pages support, there are x86 changes moving part of
  arch/x86/mm/hugetlbpage.c into mm/hugetlb.c to be re-used by arm64"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (66 commits)
  arm64: Add initial DTS for APM X-Gene Storm SOC and APM Mustang board
  arm64: Add defines for APM ARMv8 implementation
  arm64: Enable APM X-Gene SOC family in the defconfig
  arm64: Add Kconfig option for APM X-Gene SOC family
  arm64/Makefile: provide vdso_install target
  ARM64: mm: THP support.
  ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.
  ARM64: mm: HugeTLB support.
  ARM64: mm: Move PTE_PROT_NONE bit.
  ARM64: mm: Make PAGE_NONE pages read only and no-execute.
  ARM64: mm: Restore memblock limit when map_mem finished.
  mm: thp: Correct the HPAGE_PMD_ORDER check.
  x86: mm: Remove general hugetlb code from x86.
  mm: hugetlb: Copy general hugetlb code from x86 to mm.
  x86: mm: Remove x86 version of huge_pmd_share.
  mm: hugetlb: Copy huge_pmd_share from x86 to mm.
  arm64: KVM: document kernel object mappings in HYP
  arm64: KVM: MAINTAINERS update
  arm64: KVM: userspace API documentation
  arm64: KVM: enable initialization of a 32bit vcpu
  ...

Pull ARM updates from Russell King:
 "This contains the usual updates from other people (listed below) and
  the usual random muddle of miscellaneous ARM updates which cover some
  low priority bug fixes and performance improvements.

  I've started to put the pull request wording into the merge commits,
  which are:

   - NoMMU stuff:

     This includes the following series sent earlier to the list:
      - nommu-fixes
      - R7 Support
      - MPU support

     I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I
     were discussing today until we've reached a conclusion/that's had
     some more review.

     This is rebased (and re-tested) on your devel-stable branch because
     otherwise there were going to be conflicts with Uwe's V7M work now
     that you've merged that.  I've included the fix for limiting MPU to
     CPU_V7.

   - Huge page support

     These changes bring both HugeTLB support and Transparent HugePage
     (THP) support to ARM.  Only long descriptors (LPAE) are supported
     in this series.

     The code has been tested on an Arndale board (Exynos 5250).

   - LPAE updates

     Please pull these miscellaneous LPAE fixes I've been collecting for
     a while now for 3.11.  They've been tested and reviewed by quite a
     few people, and most of the patches are pretty trivial.  -- Will Deacon.

   - arch_timer cleanups

     Please pull these arch_timer cleanups I've been holding onto for a
     while.  They're the same as my last posting, but have been rebased
     to v3.10-rc3.

   - mpidr linearisation (multiprocessor id register - identifies which
     CPU number we are in the system)

     This patch series that implements MPIDR linearization through a
     simple hashing algorithm and updates current cpu_{suspend}/{resume}
     code to use the newly created hash structures to retrieve context
     pointers.  It represents a stepping stone for the implementation of
     power management code on forthcoming multi-cluster ARM systems.

     It has been tested on TC2 (dual cluster A15xA7 system), iMX6q,
     OMAP4 and Tegra, with processors hitting low-power states requiring
     warm-boot resume through the cpu_resume code path"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: 7775/1: mm: Remove do_sect_fault from LPAE code
  ARM: 7777/1: Avoid extra calls to the C compiler
  ARM: 7774/1: Fix dtb dependency to use order-only prerequisites
  ARM: 7770/1: remove residual ARMv2 support from decompressor
  ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation
  ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator
  ARM: 7767/1: let the ASID allocator handle suspended animation
  ARM: 7766/1: versatile: don't mark pen as __INIT
  ARM: 7765/1: perf: Record the user-mode PC in the call chain.
  ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork
  ARM: kernel: implement stack pointer save array through MPIDR hashing
  ARM: kernel: build MPIDR hash function data structure
  ARM: mpu: Ensure that MPU depends on CPU_V7
  ARM: mpu: protect the vectors page with an MPU region
  ARM: mpu: Allow enabling of the MPU via kconfig
  ARM: 7758/1: introduce config HAS_BANDGAP
  ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting
  ARM: 7751/1: zImage: don't overwrite ourself with a page table
  ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock
  ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace
  ...

Pull second set of VFS changes from Al Viro:
 "Assorted f_pos race fixes, making do_splice_direct() safe to call with
  i_mutex on parent, O_TMPFILE support, Jeff's locks.c series,
  ->d_hash/->d_compare calling conventions changes from Linus, misc
  stuff all over the place."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  Document ->tmpfile()
  ext4: ->tmpfile() support
  vfs: export lseek_execute() to modules
  lseek_execute() doesn't need an inode passed to it
  block_dev: switch to fixed_size_llseek()
  cpqphp_sysfs: switch to fixed_size_llseek()
  tile-srom: switch to fixed_size_llseek()
  proc_powerpc: switch to fixed_size_llseek()
  ubi/cdev: switch to fixed_size_llseek()
  pci/proc: switch to fixed_size_llseek()
  isapnp: switch to fixed_size_llseek()
  lpfc: switch to fixed_size_llseek()
  locks: give the blocked_hash its own spinlock
  locks: add a new "lm_owner_key" lock operation
  locks: turn the blocked_list into a hashtable
  locks: convert fl_link to a hlist_node
  locks: avoid taking global lock if possible when waking up blocked waiters
  locks: protect most of the file_lock handling with i_lock
  locks: encapsulate the fl_link list handling
  locks: make "added" in __posix_lock_file a bool
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

very similar to ext3 counterpart...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

For those file systems(btrfs/ext4/ocfs2/tmpfs) that support
SEEK_DATA/SEEK_HOLE functions, we end up handling the similar
matter in lseek_execute() to update the current file offset
to the desired offset if it is valid, ceph also does the
simliar things at ceph_llseek().

To reduce the duplications, this patch make lseek_execute()
public accessible so that we can call it directly from the
underlying file systems.

Thanks Dave Chinner for this suggestion.

[AV: call it vfs_setpos(), don't bring the removed 'inode' argument back]

v2->v1:
- Add kernel-doc comments for lseek_execute()
- Call lseek_execute() in ceph->llseek()
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull cpuset changes from Tejun Heo:
 "cpuset has always been rather odd about its configurations - a cgroup
  right after creation didn't allow any task executions before
  configuration, changing configuration in the parent modifies the
  descendants irreversibly and so on.  These behaviors are inherently
  nasty and almost hostile against sharing the hierarchy with other
  controllers making it very difficult to use in unified hierarchy.

  Li is currently in the process of updating the behaviors for
  __DEVEL__sane_behavior which is the bulk of changes in this pull
  request.  It isn't complete yet and the behaviors will change further
  but all changes are gated behind sane_behavior.  In the process, the
  rather hairy work-item punting which was used to work around the
  limitations of cgroup descendant iterator was simplified."

* 'for-3.11-cpuset' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: rename @cont to @cgrp
  cpuset: fix to migrate mm correctly in a corner case
  cpuset: allow to move tasks to empty cpusets
  cpuset: allow to keep tasks in empty cpusets
  cpuset: introduce effective_{cpumask|nodemask}_cpuset()
  cpuset: record old_mems_allowed in struct cpuset
  cpuset: remove async hotplug propagation work
  cpuset: let hotplug propagation work wait for task attaching
  cpuset: re-structure update_cpumask() a bit
  cpuset: remove cpuset_test_cpumask()
  cpuset: remove unnecessary variable in cpuset_attach()
  cpuset: cleanup guarantee_online_{cpus|mems}()
  cpuset: remove redundant check in cpuset_cpus_allowed_fallback()

Pull cgroup changes from Tejun Heo:
 "This pull request contains the following changes.

   - cgroup_subsys_state (css) reference counting has been converted to
     percpu-ref.  css is what each resource controller embeds into its
     own control structure and perform reference count against.  It may
     be used in hot paths of various subsystems and is similar to module
     refcnt in that aspect.  For example, block-cgroup's css refcnting
     was showing up a lot in Mikulaus's device-mapper scalability work
     and this should alleviate it.

   - cgroup subtree iterator has been updated so that RCU read lock can
     be released after grabbing reference.  This allows simplifying its
     users which requires blocking which used to build iteration list
     under RCU read lock and then traverse it outside.  This pull
     request contains simplification of cgroup core and device-cgroup.
     A separate pull request will update cpuset.

   - Fixes for various bugs including corner race conditions and RCU
     usage bugs.

   - A lot of cleanups and some prepartory work for the planned unified
     hierarchy support."

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (48 commits)
  cgroup: CGRP_ROOT_SUBSYS_BOUND should also be ignored when mounting an existing hierarchy
  cgroup: CGRP_ROOT_SUBSYS_BOUND should be ignored when comparing mount options
  cgroup: fix deadlock on cgroup_mutex via drop_parsed_module_refcounts()
  cgroup: always use RCU accessors for protected accesses
  cgroup: fix RCU accesses around task->cgroups
  cgroup: fix RCU accesses to task->cgroups
  cgroup: grab cgroup_mutex in drop_parsed_module_refcounts()
  cgroup: fix cgroupfs_root early destruction path
  cgroup: reserve ID 0 for dummy_root and 1 for unified hierarchy
  cgroup: implement for_each_[builtin_]subsys()
  cgroup: move init_css_set initialization inside cgroup_mutex
  cgroup: s/for_each_subsys()/for_each_root_subsys()/
  cgroup: clean up find_css_set() and friends
  cgroup: remove cgroup->actual_subsys_mask
  cgroup: prefix global variables with "cgroup_"
  cgroup: convert CFTYPE_* flags to enums
  cgroup: rename cont to cgrp
  cgroup: clean up cgroup_serial_nr_cursor
  cgroup: convert cgroup_cft_commit() to use cgroup_for_each_descendant_pre()
  cgroup: make serial_nr_cursor available throughout cgroup.c
  ...

Pull workqueue changes from Tejun Heo:
 "Surprisingly, Lai and I didn't break too many things implementing
  custom pools and stuff last time around and there aren't any follow-up
  changes necessary at this point.

  The only change in this pull request is Viresh's patches to make some
  per-cpu workqueues to behave as unbound workqueues dependent on a boot
  param whose default can be configured via a config option.  This leads
  to higher processing overhead / lower bandwidth as more work items are
  bounced across CPUs; however, it can lead to noticeable powersave in
  certain configurations - ~10% w/ idlish constant workload on a
  big.LITTLE configuration according to Viresh.

  This is because per-cpu workqueues interfere with how the scheduler
  perceives whether or not each CPU is idle by forcing pinned tasks on
  them, which makes the scheduler's power-aware scheduling decisions
  less effective.

  Its effectiveness is likely less pronounced on homogenous
  configurations and this type of optimization can probably be made
  automatic; however, the changes are pretty minimal and the affected
  workqueues are clearly marked, so it's an easy gain for some
  configurations for the time being with pretty unintrusive changes."

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  fbcon: queue work on power efficient wq
  block: queue work on power efficient wq
  PHYLIB: queue work on system_power_efficient_wq
  workqueue: Add system wide power_efficient workqueues
  workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues

Pull per-cpu changes from Tejun Heo:
 "This pull request contains Kent's per-cpu reference counter.  It has
  gone through several iterations since the last time and the dynamic
  allocation is gone.

  The usual usage is relatively straight-forward although async kill
  confirm interface, which is not used int most cases, is somewhat icky.
  There also are some interface concerns - e.g.  I'm not sure about
  passing in @relesae callback during init as that becomes funny when we
  later implement synchronous kill_and_drain - but nothing too serious
  and it's quite useable now.

  cgroup_subsys_state refcnting has already been converted and we should
  convert module refcnt (Kent?)"

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu-refcount: use RCU-sched insted of normal RCU
  percpu-refcount: implement percpu_tryget() along with percpu_ref_kill_and_confirm()
  percpu-refcount: implement percpu_ref_cancel_init()
  percpu-refcount: add __must_check to percpu_ref_init() and don't use ACCESS_ONCE() in percpu_ref_kill_rcu()
  percpu-refcount: cosmetic updates
  percpu-refcount: consistently use plain (non-sched) RCU
  percpu-refcount: Don't use silly cmpxchg()
  percpu: implement generic percpu refcounting

Pull x86 UV update from Ingo Molnar:
 "There's a single commit in this tree, which adds support for a new SGI
  UV GRU (Global Reference Unit - fast NUMA messaging ASIC) hardware
  feature to scale up and beyond: an optional distributed mode that will
  allow per-node address mapping of local GRU space, as opposed to
  mapping all GRU hardware to the same contiguous high space"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/UV: Add GRU distributed mode mappings

Pull x86 tracing updates from Ingo Molnar:
 "This tree adds IRQ vector tracepoints that are named after the handler
  and which output the vector #, based on a zero-overhead approach that
  relies on changing the IDT entries, by Seiji Aguchi.

  The new tracepoints look like this:

   # perf list | grep -i irq_vector
    irq_vectors:local_timer_entry                      [Tracepoint event]
    irq_vectors:local_timer_exit                       [Tracepoint event]
    irq_vectors:reschedule_entry                       [Tracepoint event]
    irq_vectors:reschedule_exit                        [Tracepoint event]
    irq_vectors:spurious_apic_entry                    [Tracepoint event]
    irq_vectors:spurious_apic_exit                     [Tracepoint event]
    irq_vectors:error_apic_entry                       [Tracepoint event]
    irq_vectors:error_apic_exit                        [Tracepoint event]
   [...]"

* 'x86-tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tracing: Add config option checking to the definitions of mce handlers
  trace,x86: Do not call local_irq_save() in load_current_idt()
  trace,x86: Move creation of irq tracepoints from apic.c to irq.c
  x86, trace: Add irq vector tracepoints
  x86: Rename variables for debugging
  x86, trace: Introduce entering/exiting_irq()
  tracing: Add DEFINE_EVENT_FN() macro

Pull x86 RAS update from Ingo Molnar:
 "The changes in this tree are:

   - ACPI APEI (ACPI Platform Error Interface) improvements, by Chen
     Gong
   - misc MCE fixes/cleanups"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Update MCE severity condition check
  mce: acpi/apei: Add comments to clarify usage of the various bitfields in the MCA subsystem
  ACPI/APEI: Update einj documentation for param1/param2
  ACPI/APEI: Add parameter check before error injection
  ACPI, APEI, EINJ: Fix error return code in einj_init()
  x86, mce: Fix "braodcast" typo