In a kernel configuration with both CONFIG_FB_OMAP=m and CONFIG_FB_OMAP2=m,
Kbuild fails to point out that we have two modules with the same name (omapfb.ko),
but instead fails with a cryptic error message like:

ERROR: "omapfb_register_panel" [drivers/video/fbdev/omap/lcd_osk.ko] undefined!

This can now happen when building a randconfig kernel with CONFIG_ARCH_OMAP1,
as the omap1 fbdev driver depends on that, whiel the omap2 fbdev driver can
now be built anywhere with CONFIG_COMPILE_TEST.

The solution is to rename one of the two modules, so for consistency with
the directory naming I decided to rename the omap2 version to omap2fb.ko.

Fixes: 7378f114 ("media: omap2: omapfb: allow building it with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does
not have deallocation of fb, which leads to memory leak on probe/remove.

The patch adds deallocation into goldfish_fb_remove().

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Fix up the indenting that confused sphinx. To make sure we
don't have to make the examples unreadable with escaping just
put them in as block quotes, that seems the simplest solution.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[b.zolnierkie: ported over fbdev changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

The "mem" buffer has "size" bytes.  The ">" should be ">=" to prevent
reading one character beyond the end of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

It's been a pretty good while since kernel modesetting was introduced.
It has almost entirely replaced previous solutions which required
userspace modesetting, and I can't even recall any drivers off the top
of my head for modern day hardware that don't only support one or the
other. Even nvidia's ugly blob does not require the use of nomodeset,
and only requires that nouveau be blacklisted.

Effectively, the only thing nomodeset does in the year 2018 is disable
your graphics drivers. Since VESA is a thing, this will give many users
the false impression that they've actually fixed an issue they were
having with their machine simply because the laptop will boot up to a
degraded GUI. This of course, is never actually the case.

Things get even worse when you consider that there's still an enormous
amount of tutorials users find on the internet that still suggest adding
nomodeset, along with various users who have been around long enough to
still suggest it.

There really isn't any legitimate reason I can see for this to be an
option that's used by anyone else other then developers, or properly
informed users. So, let's end the confusion and start printing warnings
whenever it's enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Jan H. Schönherr" <jschoenh@amazon.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Change beeng to being and occured to occurred.
Signed-off-by: Yisheng Xie <ysxie@foxmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Lechner <david@lechnology.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Following pattern is often used:

 for (i = 0; i < FB_MAX; i++) {
        if (registered_fb[i]) {
                ...
        }
 }

Therefore, as Andy's suggestion, for_each_registered_fb() helper can
be introduced to make the code easier to read and write by reducing
indentation level. It also saves few lines of code in each occurrence.

This patch convert all part here at the same time.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yisheng Xie <ysxie@foxmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

In the quest to remove all stack VLA usage from the kernel[1], this moves
the buffer off the stack (since it could be as much as 1024 bytes), and
uses a new area in the cursor data structure. Additionally adds missed
documentation and removes redundant assignments.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Optionally obtain a lcd-supply regulator during probe and use it in
__pxafb_lcd_power() to switch the power supply of LCD panels.

This helps boards booted from DT to control such voltages without
callbacks.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

pxafb_init_fbinfo() can not only report errors caused by failed
allocations but also when the clock can't be found.

To fix this, return an error pointer instead of NULL in case of errors,
and up-chain the result.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

This helps us clean up the probe() and remove() implementations.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

When parsing the video modes from DT properties, make sure to zero out
memory before using it. This is important because not all fields in the mode
struct are explicitly initialized, even though they are used later on.

Fixes: 420a4882 ("video: fbdev: pxafb: initial devicetree conversion")
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Add a device tree match table for this hardware graphics acceleration
driver so it can be used by pxa3xx boards booted with a devicetree.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

This patch adds the binding documentation for the pxa300 gcu.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

I discovered the problem when developing a frame buffer driver for the
PlayStation 2 (not yet merged), using the following video modes for the
PlayStation 3 in drivers/video/fbdev/ps3fb.c:

    }, {
        /* 1080if */
        "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5,
        FB_SYNC_BROADCAST, FB_VMODE_INTERLACED
    }, {
        /* 1080pf */
        "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5,
        FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED
    },

In ps3fb_probe, the mode_option module parameter is used with fb_find_mode
but it can only select the interlaced variant of 1920x1080 since the loop
matching the modes does not take the difference between interlaced and
progressive modes into account.

In short, without the patch, progressive 1920x1080 cannot be chosen as a
mode_option parameter since fb_find_mode (falsely) thinks interlace is a
perfect match.
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
[b.zolnierkie: updated patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

On systems where fbcon is configured for deferred console takeover, the
intend is for the framebuffer to show the boot graphics (e.g a vendor
logo) until some message (e.g. an error) is printed or a graphical
session takes over.

Some firmware relies on the OS to show the boot graphics.

This patch adds support to efifb to show the boot graphics and
automatically enables this when fbcon is configured for deferred
console takeover.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

bgrt_image_size is necessary to (optionally) show the boot graphics from
the efifb code. The efifb driver is a platform driver, using a normal
driver probe() driver callback. So even though it is always builtin it
cannot reference __initdata.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Simplefb is not a clock provider, but it uses of_clk_get_parent_count(),
so it can just include <linux/of_clk.h> instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Return an error code on failure.

Problem found using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

User space Android code identifies pixclock == 0 as a sign for emulation
and will set the frame rate to 60 fps when reading this value, which is
the desired outcome.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Add an ACPI id to make goldfish framebuffer to support ACPI enumeration.
Signed-off-by: Yu Ning <yu.ning@intel.com>
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Address issues pointed by checkpatch.pl
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Merge tag 'ib-fbdev-drm-v4.19-deferred-console-takeover-fixup' of https://github.com/bzolnier/linux into fbdev-for-next

Immutable branch between fbdev and drm for the v4.19 merge window
(contains build fixup for the deferred console takeover feature)

Export dummycon_[un]register_output_notifier, the fbcon code needs this
and may be build as a module.

Fixes: 83d83beb ("console/fbcon: Add support for deferred console takeover")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Merge tag 'ib-fbdev-drm-v4.19-deferred-console-takeover' of https://github.com/bzolnier/linux into fbdev-for-next

Immutable branch between fbdev and drm for the v4.19 merge window
(contains the deferred console takeover feature)

Currently fbcon claims fbdevs as soon as they are registered and takes over
the console as soon as the first fbdev gets registered.

This behavior is undesirable in cases where a smooth graphical bootup is
desired, in such cases we typically want the contents of the framebuffer
(typically a vendor logo) to stay in place as is.

The current solution for this problem (on embedded systems) is to not
enable fbcon.

This commit adds a new FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER config option,
which when enabled defers fbcon taking over the console from the dummy
console until the first text is displayed on the console. Together with the
"quiet" kernel commandline option, this allows fbcon to still be used
together with a smooth graphical bootup, having it take over the console as
soon as e.g. an error message is logged.

Note the choice to detect the first console output in the dummycon driver,
rather then handling this entirely inside the fbcon code, was made after
2 failed attempts to handle this entirely inside the fbcon code. The fbcon
code is woven quite tightly into the console code, making this to only
feasible option.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Replace comments about places where the console lock should be held with
calls to WARN_CONSOLE_UNLOCKED() to assert that it is actually held.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

This is a preparation patch for adding a number of WARN_CONSOLE_UNLOCKED()
calls to the fbcon code, which may be built as a module (event though
usually it is not).
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

Merge tag 'v4.18-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.18-rc2

Pull perf fixes from Thomas Gleixner:
 "A pile of perf updates:

  Kernel side:

   - Remove an incorrect warning in uprobe_init_insn() when
     insn_get_length() fails. The error return code is handled at the
     call site.

   - Move the inline keyword to the right place in the perf ringbuffer
     code to address a W=1 build warning.

  Tooling:

  perf stat:

   - Fix metric column header display alignment

   - Improve error messages for default attributes, providing better
     output for error in command line.

   - Add --interval-clear option, to provide a 'watch' like printing

  perf script:

   - Show hw-cache events too

  perf c2c:

   - Fix data dependency problem in layout of 'struct c2c_hist_entry'

  Core:

   - Do not blindly assume that 'struct perf_evsel' can be obtained via
     a straight forward container_of() as there are call sites which
     hand in a plain 'struct hist' which is not part of a container.

   - Fix error index in the PMU event parser, so that error messages can
     point to the problematic token"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Move the inline keyword at the beginning of the function declaration
  uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn()
  perf script: Show hw-cache events
  perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry
  perf stat: Add event parsing error handling to add_default_attributes
  perf stat: Allow to specify specific metric column len
  perf stat: Fix metric column header display alignment
  perf stat: Use only color_fprintf call in print_metric_only
  perf stat: Add --interval-clear option
  perf tools: Fix error index for pmu event parser
  perf hists: Reimplement hists__has_callchains()
  perf hists browser gtk: Use hist_entry__has_callchains()
  perf hists: Make hist_entry__has_callchains() work with 'perf c2c'
  perf hists: Save the callchain_size in struct hist_entry

Pull rseq fixes from Thomas Gleixer:
 "A pile of rseq related fixups:

   - Prevent infinite recursion when delivering SIGSEGV

   - Remove the abort of rseq critical section on fork() as syscalls
     inside rseq critical sections are explicitely forbidden. So no
     point in doing the abort on the child.

   - Align the rseq structure on 32 bytes in the ARM selftest code.

   - Fix file permissions of the test script"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rseq: Avoid infinite recursion when delivering SIGSEGV
  rseq/cleanup: Do not abort rseq c.s. in child on fork()
  rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes
  rseq/selftests: Make run_param_test.sh executable

Pull EFI fixes from Thomas Gleixner:
 "Two fixlets for the EFI maze:

   - Properly zero variables to prevent an early boot hang on EFI mixed
     mode systems

   - Fix the fallout of merging the 32bit and 64bit variants of EFI PCI
     related code which ended up chosing the 32bit variant of the actual
     EFi call invocation which leads to failures on 64bit"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/x86: Fix incorrect invocation of PciIo->Attributes()
  efi/libstub/tpm: Initialize efi_physical_addr_t vars to zero for mixed mode

Pull core fixes from Thomas Gleixner:
 "Two tiny fixes:

   - Add the missing machine_real_restart() to objtools noreturn list so
     it stops complaining

   - Fix a trivial comment typo"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kernel.h: Fix a typo in comment
  objtool: Add machine_real_restart() to the noreturn list

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Make Xen PV guest deal with speculative store bypass correctly

   - Address more fallout from the 5-Level pagetable handling. Undo an
     __initdata annotation to avoid section mismatch and malfunction
     when post init code would touch the freed variable.

   - Handle exception fixup in math_error() before calling notify_die().
     The reverse call order incorrectly triggers notify_die() listeners
     for soemthing which is handled correctly at the site which issues
     the floating point instruction.

   - Fix an off by one in the LLC topology calculation on AMD

   - Handle non standard memory block sizes gracefully un UV platforms

   - Plug a memory leak in the microcode loader

   - Sanitize the purgatory build magic

   - Add the x86 specific device tree bindings directory to the x86
     MAINTAINER file patterns"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix 'no5lvl' handling
  Revert "x86/mm: Mark __pgtable_l5_enabled __initdata"
  x86/CPU/AMD: Fix LLC ID bit-shift calculation
  MAINTAINERS: Add file patterns for x86 device tree bindings
  x86/microcode/intel: Fix memleak in save_microcode_patch()
  x86/platform/UV: Add kernel parameter to set memory block size
  x86/platform/UV: Use new set memory block size function
  x86/platform/UV: Add adjustable set memory block size function
  x86/build: Remove unnecessary preparation for purgatory
  Revert "kexec/purgatory: Add clean-up for purgatory directory"
  x86/xen: Add call of speculative_store_bypass_ht_init() to PV paths
  x86: Call fixup_exception() before notify_die() in math_error()

Pull x86 pti fixes from Thomas Gleixner:
 "Two small updates for the speculative distractions:

   - Make it more clear to the compiler that array_index_mask_nospec()
     is not subject for optimizations. It's not perfect, but ...

   - Don't report XEN PV guests as vulnerable because their mitigation
     state depends on the hypervisor. Report unknown and refer to the
     hypervisor requirement"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/spectre_v1: Disable compiler optimizations over array_index_mask_nospec()
  x86/pti: Don't report XenPV as vulnerable

Pull locking fixes from Thomas Gleixner:
 "A set of fixes and updates for the locking code:

   - Prevent lockdep from updating irq state within its own code and
     thereby confusing itself.

   - Buid fix for older GCCs which mistreat anonymous unions

   - Add a missing lockdep annotation in down_read_non_onwer() which
     causes up_read_non_owner() to emit a lockdep splat

   - Remove the custom alpha dec_and_lock() implementation which is
     incorrect in terms of ordering and use the generic one.

  The remaining two commits are not strictly fixes. They provide irqsave
  variants of atomic_dec_and_lock() and refcount_dec_and_lock(). These
  are required to merge the relevant updates and cleanups into different
  maintainer trees for 4.19, so routing them into mainline without
  actual users is the sanest approach.

  They should have been in -rc1, but last weekend I took the liberty to
  just avoid computers in order to regain some mental sanity"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/qspinlock: Fix build for anonymous union in older GCC compilers
  locking/lockdep: Do not record IRQ state within lockdep code
  locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS
  locking/refcounts: Implement refcount_dec_and_lock_irqsave()
  atomic: Add irqsave variant of atomic_dec_and_lock()
  alpha: Remove custom dec_and_lock() implementation

Pull ras fixes from Thomas Gleixner:
 "A set of fixes for RAS/MCE:

   - Improve the error message when the kernel cannot recover from a MCE
     so the maximum amount of information gets provided.

   - Individually check MCE recovery features on SkyLake CPUs instead of
     assuming none when the CAPID0 register does not advertise the
     general ability for recovery.

   - Prevent MCE to output inconsistent messages which first show an
     error location and then claim that the source is unknown.

   - Prevent overwriting MCi_STATUS in the attempt to gather more
     information when a fatal MCE has alreay been detected. This leads
     to empty status values in the printout and failing to react
     promptly on the fatal event"

* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Fix incorrect "Machine check from unknown source" message
  x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out()
  x86/mce: Check for alternate indication of machine check recovery on Skylake
  x86/mce: Improve error message when kernel cannot recover

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes for time(r) related issues:

   - Fix a long standing conversion issue in jiffies_to_msecs() for odd
     HZ values like 1024 or 1200 which resulted in returning 0 for small
     jiffies values due to rounding down.

   - Use the proper CONFIG symbol in the new Y2038 safe compat code for
     posix-timers. Not yet a visible breakage, but this will immediately
     trigger when the architecture support for the new interfaces is
     merged.

   - Return an error code in the STM32 clocksource driver on failure
     instead of success.

   - Remove the redundant and stale irq disabled check in the posix cpu
     timer code. The check is at the wrong place anyway and lockdep
     already covers it via the sighand lock locking coverage"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Make sure jiffies_to_msecs() preserves non-zero time periods
  posix-timers: Fix nanosleep_copyout() for CONFIG_COMPAT_32BIT_TIME
  clocksource/drivers/stm32: Fix error return code
  posix-cpu-timers: Remove lockdep_assert_irqs_disabled()

Pull irq fixes from Thomas Gleixner:
 "A set of fixes mostly for the ARM/GIC world:

   - Fix the MSI affinity handling in the ls-scfg irq chip driver so it
     updates and uses the effective affinity mask correctly

   - Prevent binding LPIs to offline CPUs and respect the Cavium erratum
     which requires that LPIs which belong to an offline NUMA node are
     not bound to a CPU on a different NUMA node.

   - Free only the amount of allocated interrupts in the GIC-V2M driver
     instead of trying to free log2(nrirqs).

   - Prevent emitting SYNC and VSYNC targetting non existing interrupt
     collections in the GIC-V3 ITS driver

   - Ensure that the GIV-V3 interrupt redistributor is correctly
     reprogrammed on CPU hotplug

   - Remove a stale unused helper function"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqdesc: Delete irq_desc_get_msi_desc()
  irqchip/gic-v3-its: Fix reprogramming of redistributors on CPU hotplug
  irqchip/gic-v3-its: Only emit VSYNC if targetting a valid collection
  irqchip/gic-v3-its: Only emit SYNC if targetting a valid collection
  irqchip/gic-v3-its: Don't bind LPI to unavailable NUMA node
  irqchip/gic-v2m: Fix SPI release on error path
  irqchip/ls-scfg-msi: Fix MSI affinity handling
  genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug