- 14 Jun, 2017 12 commits
-
-
Pavel Tatashin authored
[ Upstream commit 58897485 ] After a wrap (getting a new context version) a process must get a new context id, which means that we would need to flush the context id from the TLB before running for the first time with this ID on every CPU. But, we use mm_cpumask to determine if this process has been running on this CPU before, and this mask is not reset after a wrap. So, there are two possible fixes for this issue: 1. Clear mm cpumask whenever mm gets a new context id 2. Unconditionally flush context every time process is running on a CPU This patch implements the first solution Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by:
Bob Picco <bob.picco@oracle.com> Reviewed-by:
Steven Sistare <steven.sistare@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Clarke authored
[ Upstream commit c982aa9c ] VIO devices were being looked up by their index in the machine description node block, but this often varies over time as devices are added and removed. Instead, store the ID and look up using the type, config handle and ID. Signed-off-by:
James Clarke <jrtc27@jrtc27.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112541Signed-off-by:
-
Mike Kravetz authored
[ Upstream commit 654f4807 ] When a TSB grows beyond its current capacity, a new TSB is allocated and copy_tsb is called to copy entries from the old TSB to the new. A hash shift based on page size is used to calculate the index of an entry in the TSB. copy_tsb has hard coded PAGE_SHIFT in these calculations. However, for huge page TSBs the value REAL_HPAGE_SHIFT should be used. As a result, when copy_tsb is called for a huge page TSB the entries are placed at the incorrect index in the newly allocated TSB. When doing hardware table walk, the MMU does not match these entries and we end up in the TSB miss handling code. This code will then create and write an entry to the correct index in the TSB. We take a performance hit for the table walk miss and recreation of these entries. Pass a new parameter to copy_tsb that is the page size shift to be used when copying the TSB. Suggested-by:
Anthony Yznaga <anthony.yznaga@oracle.com> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit aeb07324 ] When the transition of NO_STP -> KERNEL_STP was fixed by always calling mod_timer in br_stp_start, it introduced a new regression which causes the timer to be armed even when the bridge is down, and since we stop the timers in its ndo_stop() function, they never get disabled if the device is destroyed before it's upped. To reproduce: $ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on; ip l del br0; done; CC: Xin Long <lucien.xin@gmail.com> CC: Ivan Vecera <cera@cera.cz> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> Reported-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Fixes: 6d18c732 ("bridge: start hello_timer when enabling KERNEL_STP in br_stp_start") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Max Filippov authored
[ Upstream commit d220b942 ] ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all. Move napi_enable above ethoc_reset in the ethoc_open to fix that. Fixes: a1702857 ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Reviewed-by:
Tobias Klauser <tklauser@distanz.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 77d4b1d3 ] Alexander reported various KASAN messages triggered in recent kernels The problem is that ping sockets should not use udp_poll() in the first place, and recent changes in UDP stack finally exposed this old bug. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Fixes: 6d0bfe22 ("net: ipv6: Add IPv6 support to the ping socket.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Sasha Levin <alexander.levin@verizon.com> Cc: Solar Designer <solar@openwall.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Lorenzo Colitti <lorenzo@google.com> Acked-By:
Lorenzo Colitti <lorenzo@google.com> Tested-By:
-
David S. Miller authored
[ Upstream commit e3e86b51 ] If ip6_find_1stfragopt() fails and we return an error we have to free up 'segs' because nobody else is going to. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Mark Bloch authored
[ Upstream commit a53cb29b ] Adding a vxlan interface to a socket isn't symmetrical, while adding is done in vxlan_open() the deletion is done in vxlan_dellink(). This can cause a use-after-free error when we close the vxlan interface before deleting it. We add vxlan_vs_del_dev() to match vxlan_vs_add_dev() and call it from vxlan_stop() to match the call from vxlan_open(). Fixes: 56ef9c90 ("vxlan: Move socket initialization to within rtnl scope") Acked-by:
Jiri Benc <jbenc@redhat.com> Tested-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Mark Bloch <markb@mellanox.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit 44abafc4 ] When the sender switches its congestion control during loss recovery, if the recovery is spurious then it may incorrectly revert cwnd and ssthresh to the older values set by a previous congestion control. Consider a congestion control (like BBR) that does not use ssthresh and keeps it infinite: the connection may incorrectly revert cwnd to an infinite value when switching from BBR to another congestion control. This patch fixes it by disallowing such cwnd undo operation upon switching congestion control. Note that undo_marker is not reset s.t. the packets that were incorrectly marked lost would be corrected. We only avoid undoing the cwnd in tcp_undo_cwnd_reduction(). Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Ganesh Goudar authored
[ Upstream commit e7519f99 ] Take uld mutex to avoid race between cxgb_up() and cxgb4_register_uld() to enable napi for the same uld queue. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 6e80ac5c ] xfrm6_find_1stfragopt() may now return an error code and we must not treat it as a length. Fixes: 2423496a ("ipv6: Prevent overrun when parsing v6 header options") Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Mintz, Yuval authored
[ Upstream commit 3968d389 ] Apparently multi-cos isn't working for bnx2x quite some time - driver implements ndo_select_queue() to allow queue-selection for FCoE, but the regular L2 flow would cause it to modulo the fallback's result by the number of queues. The fallback would return a queue matching the needed tc [via __skb_tx_hash()], but since the modulo is by the number of TSS queues where number of TCs is not accounted, transmission would always be done by a queue configured into using TC0. Fixes: ada7c19e ("bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hash") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
- 07 Jun, 2017 28 commits
-
-
Greg Kroah-Hartman authored
-
Eric Sandeen authored
commit 2a6fba6d upstream. Today, the put_listent formatters return either 1 or 0; if they return 1, some callers treat this as an error and return it up the stack, despite "1" not being a valid (negative) error code. The intent seems to be that if the input buffer is full, we set seen_enough or set count = -1, and return 1; but some callers check the return before checking the seen_enough or count fields of the context. Fix this by only returning non-zero for actual errors encountered, and rely on the caller to first check the return value, then check the values in the context to decide what to do. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Darrick J. Wong authored
commit 0facef7f upstream. When we're iterating inode xattrs by handle, we have to copy the cursor back to userspace so that a subsequent invocation actually retrieves subsequent contents. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
-
Eric Sandeen authored
commit a4d768e7 upstream. This structure copy was throwing unaligned access warnings on sparc64: Kernel unaligned access at TPC[1043c088] xfs_btree_visit_blocks+0x88/0xe0 [xfs] xfs_btree_copy_ptrs does a memcpy, which avoids it. Signed-off-by:
-
Zorro Lang authored
commit 892d2a5f upstream. By run fsstress long enough time enough in RHEL-7, I find an assertion failure (harder to reproduce on linux-4.11, but problem is still there): XFS: Assertion failed: (iflags & BMV_IF_DELALLOC) != 0, file: fs/xfs/xfs_bmap_util.c The assertion is in xfs_getbmap() funciton: if (map[i].br_startblock == DELAYSTARTBLOCK && --> map[i].br_startoff <= XFS_B_TO_FSB(mp, XFS_ISIZE(ip))) ASSERT((iflags & BMV_IF_DELALLOC) != 0); When map[i].br_startoff == XFS_B_TO_FSB(mp, XFS_ISIZE(ip)), the startoff is just at EOF. But we only need to make sure delalloc extents that are within EOF, not include EOF. Signed-off-by:
Zorro Lang <zlang@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
-
Brian Foster authored
commit 0daaecac upstream. The delalloc -> real block conversion path uses an incorrect calculation in the case where the middle part of a delalloc extent is being converted. This is documented as a rare situation because XFS generally attempts to maximize contiguity by converting as much of a delalloc extent as possible. If this situation does occur, the indlen reservation for the two new delalloc extents left behind by the conversion of the middle range is calculated and compared with the original reservation. If more blocks are required, the delta is allocated from the global block pool. This delta value can be characterized as the difference between the new total requirement (temp + temp2) and the currently available reservation minus those blocks that have already been allocated (startblockval(PREV.br_startblock) - allocated). The problem is that the current code does not account for previously allocated blocks correctly. It subtracts the current allocation count from the (new - old) delta rather than the old indlen reservation. This means that more indlen blocks than have been allocated end up stashed in the remaining extents and free space accounting is broken as a result. Fix up the calculation to subtract the allocated block count from the original extent indlen and thus correctly allocate the reservation delta based on the difference between the new total requirement and the unused blocks from the original reservation. Also remove a bogus assert that contradicts the fact that the new indlen reservation can be larger than the original indlen reservation. Signed-off-by:
-
Brian Foster authored
commit e20c8a51 upstream. The quotaoff operation has a race with inode allocation that results in a livelock. An inode allocation that occurs before the quota status flags are updated acquires the appropriate dquots for the inode via xfs_qm_vop_dqalloc(). It then inserts the XFS_INEW inode into the perag radix tree, sometime later attaches the dquots to the inode and finally clears the XFS_INEW flag. Quotaoff expects to release the dquots from all inodes in the filesystem via xfs_qm_dqrele_all_inodes(). This invokes the AG inode iterator, which skips inodes in the XFS_INEW state because they are not fully constructed. If the scan occurs after dquots have been attached to an inode, but before XFS_INEW is cleared, the newly allocated inode will continue to hold a reference to the applicable dquots. When quotaoff invokes xfs_qm_dqpurge_all(), the reference count of those dquot(s) remain elevated and the dqpurge scan spins indefinitely. To address this problem, update the xfs_qm_dqrele_all_inodes() scan to wait on inodes marked on the XFS_INEW state. We wait on the inodes explicitly rather than skip and retry to avoid continuous retry loops due to a parallel inode allocation workload. Since quotaoff updates the quota state flags and uses a synchronous transaction before the dqrele scan, and dquots are attached to inodes after radix tree insertion iff quota is enabled, one INEW waiting pass through the AG guarantees that the scan has processed all inodes that could possibly hold dquot references. Reported-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
-
Brian Foster authored
commit ae2c4ac2 upstream. The AG inode iterator currently skips new inodes as such inodes are inserted into the inode radix tree before they are fully constructed. Certain contexts require the ability to wait on the construction of new inodes, however. The fs-wide dquot release from the quotaoff sequence is an example of this. Update the AG inode iterator to support the ability to wait on inodes flagged with XFS_INEW upon request. Create a new xfs_inode_ag_iterator_flags() interface and support a set of iteration flags to modify the iteration behavior. When the XFS_AGITER_INEW_WAIT flag is set, include XFS_INEW flags in the radix tree inode lookup and wait on them before the callback is executed. Signed-off-by:
-
Brian Foster authored
commit 756baca2 upstream. Inodes that are inserted into the perag tree but still under construction are flagged with the XFS_INEW bit. Most contexts either skip such inodes when they are encountered or have the ability to handle them. The runtime quotaoff sequence introduces a context that must wait for construction of such inodes to correctly ensure that all dquots in the fs are released. In anticipation of this, support the ability to wait on new inodes. Wake the appropriate bit when XFS_INEW is cleared. Signed-off-by:
-
Brian Foster authored
commit 20e8a063 upstream. The quotacheck error handling of the delwri buffer list assumes the resident buffers are locked and doesn't clear the _XBF_DELWRI_Q flag on the buffers that are dequeued. This can lead to assert failures on buffer release and possibly other locking problems. Move this code to a delwri queue cancel helper function to encapsulate the logic required to properly release buffers from a delwri queue. Update the helper to clear the delwri queue flag and call it from quotacheck. Signed-off-by:
-
Brian Foster authored
commit cb52ee33 upstream. Directory block readahead uses a complex iteration mechanism to map between high-level directory blocks and underlying physical extents. This mechanism attempts to traverse the higher-level dir blocks in a manner that handles multi-fsb directory blocks and simultaneously maintains a reference to the corresponding physical blocks. This logic doesn't handle certain (discontiguous) physical extent layouts correctly with multi-fsb directory blocks. For example, consider the case of a 4k FSB filesystem with a 2 FSB (8k) directory block size and a directory with the following extent layout: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..7]: 88..95 0 (88..95) 8 1: [8..15]: 80..87 0 (80..87) 8 2: [16..39]: 168..191 0 (168..191) 24 3: [40..63]: 5242952..5242975 1 (72..95) 24 Directory block 0 spans physical extents 0 and 1, dirblk 1 lies entirely within extent 2 and dirblk 2 spans extents 2 and 3. Because extent 2 is larger than the directory block size, the readahead code erroneously assumes the block is contiguous and issues a readahead based on the physical mapping of the first fsb of the dirblk. This results in read verifier failure and a spurious corruption or crc failure, depending on the filesystem format. Further, the subsequent readahead code responsible for walking through the physical table doesn't correctly advance the physical block reference for dirblk 2. Instead of advancing two physical filesystem blocks, the first iteration of the loop advances 1 block (correctly), but the subsequent iteration advances 2 more physical blocks because the next physical extent (extent 3, above) happens to cover more than dirblk 2. At this point, the higher-level directory block walking is completely off the rails of the actual physical layout of the directory for the respective mapping table. Update the contiguous dirblock logic to consider the current offset in the physical extent to avoid issuing directory readahead to unrelated blocks. Also, update the mapping table advancing code to consider the current offset within the current dirblock to avoid advancing the mapping reference too far beyond the dirblock. Signed-off-by:
-
Eric Sandeen authored
commit 023cc840 upstream. Carlos had a case where "find" seemed to start spinning forever and never return. This was on a filesystem with non-default multi-fsb (8k) directory blocks, and a fragmented directory with extents like this: 0:[0,133646,2,0] 1:[2,195888,1,0] 2:[3,195890,1,0] 3:[4,195892,1,0] 4:[5,195894,1,0] 5:[6,195896,1,0] 6:[7,195898,1,0] 7:[8,195900,1,0] 8:[9,195902,1,0] 9:[10,195908,1,0] 10:[11,195910,1,0] 11:[12,195912,1,0] 12:[13,195914,1,0] ... i.e. the first extent is a contiguous 2-fsb dir block, but after that it is fragmented into 1 block extents. At the top of the readdir path, we allocate a mapping array which (for this filesystem geometry) can hold 10 extents; see the assignment to map_info->map_size. During readdir, we are therefore able to map extents 0 through 9 above into the array for readahead purposes. If we count by 2, we see that the last mapped index (9) is the first block of a 2-fsb directory block. At the end of xfs_dir2_leaf_readbuf() we have 2 loops to fill more readahead; the outer loop assumes one full dir block is processed each loop iteration, and an inner loop that ensures that this is so by advancing to the next extent until a full directory block is mapped. The problem is that this inner loop may step past the last extent in the mapping array as it tries to reach the end of the directory block. This will read garbage for the extent length, and as a result the loop control variable 'j' may become corrupted and never fail the loop conditional. The number of valid mappings we have in our array is stored in map->map_valid, so stop this inner loop based on that limit. There is an ASSERT at the top of the outer loop for this same condition, but we never made it out of the inner loop, so the ASSERT never fired. Huge appreciation for Carlos for debugging and isolating the problem. Debugged-and-analyzed-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
Bill O'Donnell <billodo@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
commit be6324c0 upstream. In xfs_ioc_getbmap, we should only copy the fields of struct getbmap from userspace, or else we end up copying random stack contents into the kernel. struct getbmap is a strict subset of getbmapx, so a partial structure copy should work fine. Signed-off-by:
-
Eryu Guan authored
commit 8affebe1 upstream. xfs_find_get_desired_pgoff() is used to search for offset of hole or data in page range [index, end] (both inclusive), and the max number of pages to search should be at least one, if end == index. Otherwise the only page is missed and no hole or data is found, which is not correct. When block size is smaller than page size, this can be demonstrated by preallocating a file with size smaller than page size and writing data to the last block. E.g. run this xfs_io command on a 1k block size XFS on x86_64 host. # xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \ -c "seek -d 0" /mnt/xfs/testfile wrote 1024/1024 bytes at offset 2048 1 KiB, 1 ops; 0.0000 sec (33.675 MiB/sec and 34482.7586 ops/sec) Whence Result DATA EOF Data at offset 2k was missed, and lseek(2) returned ENXIO. This is uncovered by generic/285 subtest 07 and 08 on ppc64 host, where pagesize is 64k. Because a recent change to generic/285 reduced the preallocated file size to smaller than 64k. Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
Jan Kara authored
commit 5375023a upstream. XFS SEEK_HOLE implementation could miss a hole in an unwritten extent as can be seen by the following command: xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k" -c "seek -h 0" file wrote 57344/57344 bytes at offset 0 56 KiB, 14 ops; 0.0000 sec (49.312 MiB/sec and 12623.9856 ops/sec) wrote 8192/8192 bytes at offset 131072 8 KiB, 2 ops; 0.0000 sec (70.383 MiB/sec and 18018.0180 ops/sec) Whence Result HOLE 139264 Where we can see that hole at offset 56k was just ignored by SEEK_HOLE implementation. The bug is in xfs_find_get_desired_pgoff() which does not properly detect the case when pages are not contiguous. Fix the problem by properly detecting when found page has larger offset than expected. Fixes: d126d43fSigned-off-by:
-
Yisheng Xie authored
commit 70feee0e upstream. Kefeng reported that when running the follow test, the mlock count in meminfo will increase permanently: [1] testcase linux:~ # cat test_mlockal grep Mlocked /proc/meminfo for j in `seq 0 10` do for i in `seq 4 15` do ./p_mlockall >> log & done sleep 0.2 done # wait some time to let mlock counter decrease and 5s may not enough sleep 5 grep Mlocked /proc/meminfo linux:~ # cat p_mlockall.c #include <sys/mman.h> #include <stdlib.h> #include <stdio.h> #define SPACE_LEN 4096 int main(int argc, char ** argv) { int ret; void *adr = malloc(SPACE_LEN); if (!adr) return -1; ret = mlockall(MCL_CURRENT | MCL_FUTURE); printf("mlcokall ret = %d\n", ret); ret = munlockall(); printf("munlcokall ret = %d\n", ret); free(adr); return 0; } In __munlock_pagevec() we should decrement NR_MLOCK for each page where we clear the PageMlocked flag. Commit 1ebb7cc6 ("mm: munlock: batch NR_MLOCK zone state updates") has introduced a bug where we don't decrement NR_MLOCK for pages where we clear the flag, but fail to isolate them from the lru list (e.g. when the pages are on some other cpu's percpu pagevec). Since PageMlocked stays cleared, the NR_MLOCK accounting gets permanently disrupted by this. Fix it by counting the number of page whose PageMlock flag is cleared. Fixes: 1ebb7cc6 (" mm: munlock: batch NR_MLOCK zone state updates") Link: http://lkml.kernel.org/r/1495678405-54569-1-git-send-email-xieyisheng1@huawei.comSigned-off-by:
Yisheng Xie <xieyisheng1@huawei.com> Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Punit Agrawal authored
commit 30809f55 upstream. On failing to migrate a page, soft_offline_huge_page() performs the necessary update to the hugepage ref-count. But when !hugepage_migration_supported() , unmap_and_move_hugepage() also decrements the page ref-count for the hugepage. The combined behaviour leaves the ref-count in an inconsistent state. This leads to soft lockups when running the overcommitted hugepage test from mce-tests suite. Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000 soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head) INFO: rcu_preempt detected stalls on CPUs/tasks: Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715 (detected by 7, t=5254 jiffies, g=963, c=962, q=321) thugetlb_overco R running task 0 2715 2685 0x00000008 Call trace: dump_backtrace+0x0/0x268 show_stack+0x24/0x30 sched_show_task+0x134/0x180 rcu_print_detail_task_stall_rnp+0x54/0x7c rcu_check_callbacks+0xa74/0xb08 update_process_times+0x34/0x60 tick_sched_handle.isra.7+0x38/0x70 tick_sched_timer+0x4c/0x98 __hrtimer_run_queues+0xc0/0x300 hrtimer_interrupt+0xac/0x228 arch_timer_handler_phys+0x3c/0x50 handle_percpu_devid_irq+0x8c/0x290 generic_handle_irq+0x34/0x50 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x5c/0xb0 Address this by changing the putback_active_hugepage() in soft_offline_huge_page() to putback_movable_pages(). This only triggers on systems that enable memory failure handling (ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration (!ARCH_ENABLE_HUGEPAGE_MIGRATION). I imagine this wasn't triggered as there aren't many systems running this configuration. [akpm@linux-foundation.org: remove dead comment, per Naoya] Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.comReported-by:
Manoj Iyer <manoj.iyer@canonical.com> Tested-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Punit Agrawal <punit.agrawal@arm.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Patrik Jakobsson authored
commit 82bc9a42 upstream. With LVDS we were incorrectly picking the pre-programmed mode instead of the prefered mode provided by VBT. Make sure we pick the VBT mode if one is provided. It is likely that the mode read-out code is still wrong but this patch fixes the immediate problem on most machines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.comSigned-off-by:
-
Thomas Gleixner authored
commit 478fe303 upstream. memcg_propagate_slab_attrs() abuses the sysfs attribute file functions to propagate settings from the root kmem_cache to a newly created kmem_cache. It does that with: attr->show(root, buf); attr->store(new, buf, strlen(bug); Aside of being a lazy and absurd hackery this is broken because it does not check the return value of the show() function. Some of the show() functions return 0 w/o touching the buffer. That means in such a case the store function is called with the stale content of the previous show(). That causes nonsense like invoking kmem_cache_shrink() on a newly created kmem_cache. In the worst case it would cause handing in an uninitialized buffer. This should be rewritten proper by adding a propagate() callback to those slub_attributes which must be propagated and avoid that insane conversion to and from ASCII, but that's too large for a hot fix. Check at least the return value of the show() function, so calling store() with stale content is prevented. Steven said: "It can cause a deadlock with get_online_cpus() that has been uncovered by recent cpu hotplug and lockdep changes that Thomas and Peter have been doing. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpu_hotplug.lock); lock(slab_mutex); lock(cpu_hotplug.lock); lock(slab_mutex); *** DEADLOCK ***" Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705201244540.2255@nanosSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Reported-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Alexander Tsoy authored
commit 1fc2e41f upstream. This model is actually called 92XXM2-8 in Windows driver. But since pin configs for M22 and M28 are identical, just reuse M22 quirk. Fixes external microphone (tested) and probably docking station ports (not tested). Signed-off-by:
Alexander Tsoy <alexander@tsoy.me> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nicolas Iooss authored
commit ff5a2016 upstream. Commit 5b5e0928 ("lib/vsprintf.c: remove %Z support") removed some usages of format %Z but forgot "%.2Zx". This makes clang 4.0 reports a -Wformat-extra-args warning because it does not know about %Z. Replace %Z with %z. Link: http://lkml.kernel.org/r/20170520090946.22562-1-nicolas.iooss_linux@m4x.orgSigned-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Harald Welte <laforge@gnumonks.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Lyude authored
commit 3d18e337 upstream. We end up reading the interrupt register for HPD5, and then writing it to HPD6 which on systems without anything using HPD5 results in permanently disabling hotplug on one of the display outputs after the first time we acknowledge a hotplug interrupt from the GPU. This code is really bad. But for now, let's just fix this. I will hopefully have a large patch series to refactor all of this soon. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Lyude <lyude@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 58d7e3e4 upstream. Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868Acked-by:
-
Ram Pai authored
commit f2e767bb upstream. The firmware or device, possibly under a heavy I/O load, can return on a partial unaligned boundary. Scsi-ml expects these requests to be completed on an alignment boundary. Scsi-ml blindly requeues the I/O without checking the alignment boundary of the I/O request for the remaining bytes. This leads to errors, since devices cannot perform non-aligned read/write operations. This patch fixes the issue in the driver. It aligns unaligned completions of FS requests, by truncating them to the nearest alignment boundary. [mkp: simplified if statement] Reported-by:
Mauricio Faria De Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Acked-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Jason Gerecke authored
commit 2ac97f0f upstream. The following Smatch complaint was generated in response to commit 2a6cdbdd ("HID: wacom: Introduce new 'touch_input' device"): drivers/hid/wacom_wac.c:1586 wacom_tpc_irq() error: we previously assumed 'wacom->touch_input' could be null (see line 1577) The 'touch_input' and 'pen_input' variables point to the 'struct input_dev' used for relaying touch and pen events to userspace, respectively. If a device does not have a touch interface or pen interface, the associated input variable is NULL. The 'wacom_tpc_irq()' function is responsible for forwarding input reports to a more-specific IRQ handler function. An unknown report could theoretically be mistaken as e.g. a touch report on a device which does not have a touch interface. This can be prevented by only calling the pen/touch functions are called when the pen/touch pointers are valid. Fixes: 2a6cdbdd ("HID: wacom: Introduce new 'touch_input' device") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Srinath Mannam authored
commit f5f968f2 upstream. The stingray SDHCI hardware supports ACMD12 and automatically issues after multi block transfer completed. If ACMD12 in SDHCI is disabled, spurious tx done interrupts are seen on multi block read command with below error message: Got data interrupt 0x00000002 even though no data operation was in progress. This patch uses SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 to enable ACM12 support in SDHCI hardware and suppress spurious interrupt. Signed-off-by:
Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Fixes: b580c52d ("mmc: sdhci-iproc: add IPROC SDHCI driver") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Sebastian Reichel authored
commit 5165da59 upstream. Since v4.9 i2c-tiny-usb generates the below call trace and longer works, since it can't communicate with the USB device. The reason is, that since v4.9 the USB stack checks, that the buffer it should transfer is DMA capable. This was a requirement since v2.2 days, but it usually worked nevertheless. [ 17.504959] ------------[ cut here ]------------ [ 17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.506545] transfer buffer not dma capable [ 17.507022] Modules linked in: [ 17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10 [ 17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 17.509039] Call Trace: [ 17.509320] ? dump_stack+0x5c/0x78 [ 17.509714] ? __warn+0xbe/0xe0 [ 17.510073] ? warn_slowpath_fmt+0x5a/0x80 [ 17.510532] ? nommu_map_sg+0xb0/0xb0 [ 17.510949] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.511482] ? usb_hcd_submit_urb+0x336/0xab0 [ 17.511976] ? wait_for_completion_timeout+0x12f/0x1a0 [ 17.512549] ? wait_for_completion_timeout+0x65/0x1a0 [ 17.513125] ? usb_start_wait_urb+0x65/0x160 [ 17.513604] ? usb_control_msg+0xdc/0x130 [ 17.514061] ? usb_xfer+0xa4/0x2a0 [ 17.514445] ? __i2c_transfer+0x108/0x3c0 [ 17.514899] ? i2c_transfer+0x57/0xb0 [ 17.515310] ? i2c_smbus_xfer_emulated+0x12f/0x590 [ 17.515851] ? _raw_spin_unlock_irqrestore+0x11/0x20 [ 17.516408] ? i2c_smbus_xfer+0x125/0x330 [ 17.516876] ? i2c_smbus_xfer+0x125/0x330 [ 17.517329] ? i2cdev_ioctl_smbus+0x1c1/0x2b0 [ 17.517824] ? i2cdev_ioctl+0x75/0x1c0 [ 17.518248] ? do_vfs_ioctl+0x9f/0x600 [ 17.518671] ? vfs_write+0x144/0x190 [ 17.519078] ? SyS_ioctl+0x74/0x80 [ 17.519463] ? entry_SYSCALL_64_fastpath+0x1e/0xad [ 17.519959] ---[ end trace d047c04982f5ac50 ]--- Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by:
Till Harbaum <till@harbaum.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Vlad Yasevich authored
commit 35d2f80b upstream. It appears that TCP checksum offloading has been broken for Q-in-Q vlans. The behavior was execerbated by the series commit afb0bc97 ("Merge branch 'stacked_vlan_tso'") that that enabled accleleration features on stacked vlans. However, event without that series, it is possible to trigger this issue. It just requires a lot more specialized configuration. The root cause is the interaction between how netdev_intersect_features() works, the features actually set on the vlan devices and HW having the ability to run checksum with longer headers. The issue starts when netdev_interesect_features() replaces NETIF_F_HW_CSUM with a combination of NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM, if the HW advertises IP|IPV6 specific checksums. This happens for tagged and multi-tagged packets. However, HW that enables IP|IPV6 checksum offloading doesn't gurantee that packets with arbitrarily long headers can be checksummed. This patch disables IP|IPV6 checksums on the packet for multi-tagged packets. CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> CC: Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
