Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Get rid of unneeded code, and refactor things a bit.

For MPA version 0 we abort the connection.  For > 0, we attempt to send
an MPA_START/REJECT Reply, and then disconnect gracefully.  If the send
of the MPA message fails, then we abort the connection.  We can ignore
c4iw_ep_disconnect() errors here because it will clean up the endpoint
if there are failures.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

With IPv6 addresses, the "qps" debugfs is running out of space and
truncating the output.  Bump the required size accordingly.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

markers_enabled should be read only once during MPA negotiation.
The present code does read markers_enabled twice during negotiation
which results in setting wrong recv/xmit markers if the markers_enabled is
changed in the middle of negotiation.
With this change the markers_enabled is read only once during MPA
negotiation. recv markers are set based on markers enabled module
parameter and xmit markers are set based on markers flag from the
MPA_START_REQ/MPA_START_REP.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Pull thermal management fixes from Zhang Rui:

 - fix an ordering issue in cpu cooling that cooling device is
   registered before it's ready (freq_table being populated).
   (Lukasz Luba)

 - fix a missing comment update (Caesar Wang)

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: add the note for set_trip_temp
  thermal: cpu_cooling: fix improper order during initialization

Pull block layer fixes from Jens Axboe:
 "A small collection of fixes for the current series.  This contains:

   - Two fixes for xen-blkfront, from Bob Liu.

   - A bug fix for NVMe, releasing only the specific resources we
     requested.

   - Fix for a debugfs flags entry for nbd, from Josef.

   - Plug fix from Omar, fixing up a case of code being switched between
     two functions.

   - A missing bio_put() for the new discard callers of
     submit_bio_wait(), fixing a regression causing a leak of the bio.
     From Shaun.

   - Improve dirty limit calculation precision in the writeback code,
     fixing a case where setting a limit lower than 1% of memory would
     end up being zero.  From Tejun"

* 'for-linus' of git://git.kernel.dk/linux-block:
  NVMe: Only release requested regions
  xen-blkfront: fix resume issues after a migration
  xen-blkfront: don't call talk_to_blkback when already connected to blkback
  nbd: pass the nbd pointer for flags debugfs
  block: missing bio_put following submit_bio_wait
  blk-mq: really fix plug list flushing for nomerge queues
  writeback: use higher precision calculation in domain_dirty_limits()

Pull GPIO fixes from Linus Walleij:
 "A new bunch of GPIO fixes for v4.7.

  This time I am very grateful that Ricardo Ribalda Delgado went in and
  fixed my stupid refcounting mistakes in the removal path for GPIO
  chips.  I had a feeling something was wrong here and so it was.  It
  exploded on OMAP and it fixes their problem.  Now it should be (more)
  solid.

  The rest i compilation, Kconfig and driver fixes.  Some tagged for
  stable.

  Summary:

   - Fix a NULL pointer dereference when we are searching the GPIO
     device list but one of the devices have been removed (struct
     gpio_chip pointer is NULL).

   - Fix unaligned reference counters: we were ending on +3 after all
     said and done.  It should be 0.  Remove an extraneous get_device(),
     and call cdev_del() followed by device_del() in gpiochip_remove()
     instead and the count goes to zero and calls the release() function
     properly.

   - Fix a compile warning due to a missing #include in the OF/device
     tree portions.

   - Select ANON_INODES for GPIOLIB, we're using that for our character
     device.  Some randconfig tests disclosed the problem.

   - Make sure the Zynq driver clock runs also without CONFIG_PM enabled

   - Fix an off-by-one error in the 104-DIO-48E driver

   - Fix warnings in bcm_kona_gpio_reset()"

* tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
  gpio: select ANON_INODES
  gpio: include <linux/io-mapping.h> in gpiolib-of
  gpiolib: Fix unaligned used of reference counters
  gpiolib: Fix NULL pointer deference
  gpio: zynq: initialize clock even without CONFIG_PM
  gpio: 104-dio-48e: Fix control port offset computation off-by-one error

Pull SCSI fixes from James Bottomley:
 "Two current fixes:

   - one affects Qemu CD ROM emulation, which stopped working after the
     updates in SCSI to require VPD pages from all conformant devices.

     Fix temporarily by blacklisting Qemu (we can relax later when they
     come into compliance).

   - The other is a fix to the optimal transfer size.  We set up a
     minefield for ourselves by being confused about whether the limits
     are in bytes or sectors (SCSI optimal is in blocks and the queue
     parameter is in bytes).

     This tries to fix the problem (wrong setting for queue limits
     max_sectors) and make the problem more obvious by introducing a
     wrapper function"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  sd: Fix rw_max for devices that report an optimal xfer size
  scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist

Pull i2c fixes from Wolfram Sang:

 - a bigger fix for i801 to finally be able to be loaded on some
   machines again

 - smaller driver fixes

 - documentation update because of a renamed file

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mux: reg: Provide of_match_table
  i2c: mux: refer to i2c-mux.txt
  i2c: octeon: Avoid printk after too long SMBUS message
  i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN
  i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR

Pull DeviceTree fixes from Rob Herring:

 - fix unflatten_dt_nodes when dad parameter is set.

 - add vendor prefixes for TechNexion and UniWest

 - documentation fix for Marvell BT

 - OF IRQ kerneldoc fixes

 - restrict CMA alignment adjustments to non dma-coherent

 - a couple of warning fixes in reserved-memory code

 - DT maintainers updates

* tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch
  drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes()
  drivers: of: Fix of_pci.h header guard
  dt-bindings: Add vendor prefix for TechNexion
  of: add vendor prefix for UniWest
  dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless device
  of: add missing const for of_parse_phandle_with_args() in !CONFIG_OF
  of: silence warnings due to max() usage
  drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent
  of: irq: fix of_irq_get[_byname]() kernel-doc
  MAINTAINERS: DeviceTree maintainer updates

Merge tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux

Pull uvc compat XU ioctl fixes from Andy Lutomirski:
 "uvc's compat XU ioctls go through tons of potentially buggy
  indirection.  The first patch removes the indirection.  The second one
  cleans up the code.

  Compile-tested only.  I have the hardware, but I have absolutely no
  idea what XU does, how to use it, what software to recompile as
  32-bit, or what to test in that software"

* tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
  uvc_v4l2: Simplify compat ioctl implementation
  uvc: Forward compat ioctls to their handlers directly

The uvc compat ioctl implementation seems to have copied user data
for no good reason.  Remove a bunch of copies.
Signed-off-by: Andy Lutomirski <luto@kernel.org>

The current code goes through a lot of indirection just to call a
known handler.  Simplify it: just call the handlers directly.

Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>

Pull btrfs fixes from Chris Mason:
 "Has some fixes and some new self tests for btrfs.  The self tests are
  usually disabled in the .config file (unless you're doing btrfs dev
  work), and this bunch is meant to find problems with the 64K page size
  patches.

  Jeff has a patch to help people see if they are using the hardware
  assist crc32c module, which really helps us nail down problems when
  people ask why crcs are using so much CPU.

  Otherwise, it's small fixes"

* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: self-tests: Fix extent buffer bitmap test fail on BE system
  Btrfs: self-tests: Fix test_bitmaps fail on 64k sectorsize
  Btrfs: self-tests: Use macros instead of constants and add missing newline
  Btrfs: self-tests: Support testing all possible sectorsizes and nodesizes
  Btrfs: self-tests: Execute page straddling test only when nodesize < PAGE_SIZE
  btrfs: advertise which crc32c implementation is being used at module load
  Btrfs: add validadtion checks for chunk loading
  Btrfs: add more validation checks for superblock
  Btrfs: clear uptodate flags of pages in sys_array eb
  Btrfs: self-tests: Support non-4k page size
  Btrfs: Fix integer overflow when calculating bytes_per_bitmap
  Btrfs: test_check_exists: Fix infinite loop when searching for free space entries
  Btrfs: end transaction if we abort when creating uuid root
  btrfs: Use __u64 in exported linux/btrfs.h.

Merge tag 'powerpc-4.7-3Michael Ellerman:' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from
 - ptrace: Fix out of bounds array access warning from Khem Raj
 - pseries: Fix PCI config address for DDW from Gavin Shan
 - pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
   from Michael Ellerman
 - of: fix autoloading due to broken modalias with no 'compatible' from
   Wolfram Sang
 - radix: Fix always false comparison against MMU_NO_CONTEXT from Aneesh
   Kumar K.V
 - hash: Compute the segment size correctly for ISA 3.0 from Aneesh
   Kumar K.V
 - nohash: Fix build break with 64K pages from Michael Ellerman

* tag 'powerpc-4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/nohash: Fix build break with 64K pages
  powerpc/mm/hash: Compute the segment size correctly for ISA 3.0
  powerpc/mm/radix: Fix always false comparison against MMU_NO_CONTEXT
  of: fix autoloading due to broken modalias with no 'compatible'
  powerpc/pseries: Fix IBM_ARCH_VEC_NRCORES_OFFSET since POWER8NVL was added
  powerpc/pseries: Fix PCI config address for DDW
  powerpc/ptrace: Fix out of bounds array access warning

Merge tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - fix regression in fam15h_power driver

 - minor variable type fix in lm90 driver

 - document compatible statement for ina2xx driver

* tag 'hwmon-for-linus-v4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (lm90) use proper type for update_interval
  hwmon: (ina2xx) Document compatible for INA231
  hwmon: (fam15h_power) Disable preemption when reading registers

Merge filesystem stacking fixes from Jann Horn.

* emailed patches from Jann Horn <jannh@google.com>:
  sched: panic on corrupted stack end
  ecryptfs: forbid opening files without mmap handler
  proc: prevent stacking filesystems on top

Until now, hitting this BUG_ON caused a recursive oops (because oops
handling involves do_exit(), which calls into the scheduler, which in
turn raises an oops), which caused stuff below the stack to be
overwritten until a panic happened (e.g.  via an oops in interrupt
context, caused by the overwritten CPU index in the thread_info).

Just panic directly.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This prevents users from triggering a stack overflow through a recursive
invocation of pagefault handling that involves mapping procfs files into
virtual memory.
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Tyler Hicks <tyhicks@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This prevents stacking filesystems (ecryptfs and overlayfs) from using
procfs as lower filesystem.  There is too much magic going on inside
procfs, and there is no good reason to stack stuff on top of procfs.

(For example, procfs does access checks in VFS open handlers, and
ecryptfs by design calls open handlers from a kernel thread that doesn't
drop privileges or so.)
Signed-off-by: Jann Horn <jannh@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull arm64 fix from Will Deacon:
 "A fix for an issue that Alex saw whilst swapping with hardware
  access/dirty bit support enabled in the kernel: Fix a failure to fault
  in old pages on a write when CONFIG_ARM64_HW_AFDBM is enabled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: always take dirty state from new pte in ptep_set_access_flags

Pull x86 fixes from Ingo Molnar:
 "Misc fixes from all around the map, plus a commit that introduces a
  new header of Intel model name symbols (unused) that will make the
  next merge window easier"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
  x86/entry/traps: Don't force in_interrupt() to return true in IST handlers
  x86/cpu/AMD: Extend X86_FEATURE_TOPOEXT workaround to newer models
  x86/cpu/intel: Introduce macros for Intel family numbers
  x86, build: copy ldlinux.c32 to image.iso
  x86/msr: Use the proper trace point conditional for writes

Pull scheduler fixes from Ingo Molnar:
 "Two scheduler debugging fixes"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Fix 'schedstats=enable' cmdline option
  sched/debug: Fix /proc/sched_debug regression

Pull perf fixes from Ingo Molnar:
 "A handful of tooling fixes, two PMU driver fixes and a cleanup of
  redundant code that addresses a security analyzer false positive"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Remove a redundant check
  perf/x86/intel/uncore: Remove SBOX support for Broadwell server
  perf ctf: Convert invalid chars in a string before set value
  perf record: Fix crash when kptr is restricted
  perf symbols: Check kptr_restrict for root
  perf/x86/intel/rapl: Fix pmus free during cleanup

Pull locking fixes from Ingo Molnar:
 "Misc fixes:

   - a file-based futex fix
   - one more spin_unlock_wait() fix
   - a ww-mutex deadlock detection improvement/fix
   - and a raw_read_seqcount_latch() barrier fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Calculate the futex key based on a tail page for file-based futexes
  locking/qspinlock: Fix spin_unlock_wait() some more
  locking/ww_mutex: Report recursive ww_mutex locking early
  locking/seqcount: Re-fix raw_read_seqcount_latch()

Pull EFI fixes from Ingo Molnar:
 "Two fixes: a regression/crash fix, and a message output fix"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm: Fix the format of EFI debug messages
  efi: Fix for_each_efi_memory_desc_in_map() for empty memmaps

Pull objtool fix from Ingo Molnar:
 "Addresses a false positive warning in the GPU/DRM code"

[ Technically it's not a "false positive", but it's the virtual GPU
  interface that needs the frame pointer for its own internal purposes ]

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool, drm/vmwgfx: Fix "duplicate frame pointer save" warning

Pull networking fixes from David Miller:

 1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal.

 2) Revert some msleep conversions in rtlwifi as these spots are in
    atomic context, from Larry Finger.

 3) Validate that NFTA_SET_TABLE attribute is actually specified when we
    call nf_tables_getset().  From Phil Turnbull.

 4) Don't do mdio_reset in stmmac driver with spinlock held as that can
    sleep, from Vincent Palatin.

 5) sk_filter() does things other than run a BPF filter, so we should
    not elide it's call just because sk->sk_filter is NULL.  Fix from
    Eric Dumazet.

 6) Fix missing backlog updates in several packet schedulers, from Cong
    Wang.

 7) bnx2x driver should allow VLAN add/remove while the interface is
    down, from Michal Schmidt.

 8) Several RDS/TCP race fixes from Sowmini Varadhan.

 9) fq_codel scheduler doesn't return correct queue length in dumps,
    from Eric Dumazet.

10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from
    Yuchung Cheng.

11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(),
    from Guillaume Nault.

12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian
    Westphal.

13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling,
    from Willem de Bruijn.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
  vmxnet3: segCnt can be 1 for LRO packets
  packet: compat support for sock_fprog
  stmmac: fix parameter to dwmac4_set_umac_addr()
  net/mlx5e: Fix blue flame quota logic
  net/mlx5e: Use ndo_stop explicitly at shutdown flow
  net/mlx5: E-Switch, always set mc_promisc for allmulti vports
  net/mlx5: E-Switch, Modify node guid on vf set MAC
  net/mlx5: E-Switch, Fix vport enable flow
  net/mlx5: E-Switch, Use the correct error check on returned pointers
  net/mlx5: E-Switch, Use the correct free() function
  net/mlx5: Fix E-Switch flow steering capabilities check
  net/mlx5: Fix flow steering NIC capabilities check
  net/mlx5: Fix root flow table update
  net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly
  net/mlx5: Fix masking of reserved bits in XRCD number
  net/mlx5: Fix the size of modify QP mailbox
  mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name()
  mlxsw: spectrum: Make split flow match firmware requirements
  wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
  cfg80211: remove get/set antenna and tx power warnings
  ...

Pull sound fixes from Takashi Iwai:
 "We have only few, mainly HD-audio device-specific fixes.  Realtek
  codec driver got a slightly more LOC, but they are all for the new
  codec chip, and won't affect others at all"

* tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Add PCI ID for Kabylake
  ALSA: hda/realtek: Add T560 docking unit fixup
  ALSA: hda - Fix headset mic detection problem for Dell machine
  ALSA: uapi: Add three missing header files to Kbuild file
  ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703
  ALSA: hda/realtek - ALC256 speaker noise issue

Pull drm fixes from Dave Airlie:
 "This weeks instalment of fixes:

  amdgpu:
     Lots of memory leak and firmware leak fixes

  nouveau:
     Collection of display fixes, KASAN fixes

  vc4:
     vblank/pageflipping fixes

  fsl-dcu:
     Regmap cache fix

  omap:
     Unused variable warning fix.

  Nothing too surprising so far"

* tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux: (46 commits)
  drm/amdgpu: fix warning with powerplay disabled.
  drm/amd/powerplay: delete useless code as pptable changed in vbios.
  drm/amd/powerplay: fix bug visit array out of bounds
  drm/amdgpu: fix smu ucode memleak (v2)
  drm/amdgpu: add release firmware for cgs
  drm/amdgpu: fix tonga smu_fini mem leak
  drm/amdgpu: fix fiji smu fini mem leak
  drm/amdgpu: fix cik sdma ucode memleak
  drm/amdgpu: fix sdma24 ucode mem leak
  drm/amdgpu: fix sdma3 ucode mem leak
  drm/amdgpu: fix uvd fini mem leak
  drm/amdgpu: fix gfx 7 ucode mem leak
  drm/amdgpu: fix gfx8 ucode mem leak
  drm/amdgpu: fix missing free wb for cond_exec
  drm/amdgpu: fix memleak in pptable_init
  drm/amdgpu: fix mem leak in atombios
  drm/amdgpu: fix mem leak in pplib/hwmgr
  drm/amdgpu: fix mem leak in smumgr
  drm/amdgpu: add pipeline sync while vmid switch in same ctx
  drm/amdgpu: vBIOS post only call when mem_size zero
  ...

Pull ACPI fix from Rafael Wysocki:
 "A recently introduced boot regression related to the ACPI EC
  initialization is addressed by restoring the previous behavior (Lv
  Zheng)"

* tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC

Pull power management fixes from Rafael Wysocki:
 "Stable-candidate fixes for the intel_pstate driver and the cpuidle
  core.

  Specifics:

   - Fix two intel_pstate initialization issues, one of which was
     introduced during the 4.4 cycle (Srinivas Pandruvada)

   - Fix kernel build with CONFIG_UBSAN set and CONFIG_CPU_IDLE unset
     (Catalin Marinas)"

* tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo
  cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy()
  cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE

Merge misc fixes from Andrew Morton:
 "7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/fadvise.c: do not discard partial pages with POSIX_FADV_DONTNEED
  mm: introduce dedicated WQ_MEM_RECLAIM workqueue to do lru_add_drain_all
  kernel/relay.c: fix potential memory leak
  mm: thp: broken page count after commit aa88b68c
  revert "mm: memcontrol: fix possible css ref leak on oom"
  kasan: change memory hot-add error messages to info messages
  mm/hugetlb: fix huge page reserve accounting for private mappings

On a 4-socket Brickland system, hot-removing one ioapic is fine.
Hot-removing the 2nd one causes panic in mp_unregister_ioapic()
while calling release_resource().

It is because the iomem_res pointer has already been released
when removing the first ioapic.

To explain the use of &res[num] here: res is assigned to ioapic_resources,
and later in ioapic_insert_resources() we do:

	struct resource *r = ioapic_resources;

        for_each_ioapic(i) {
                insert_resource(&iomem_resource, r);
                r++;
        }

Here 'r' is treated as an arry of 'struct resource', and the r++ ensures
that each element of the array is inserted separately. Thus we should call
release_resouce() on each element at &res[num].

Fix it by assigning the correct pointers to ioapics[i].iomem_res in
ioapic_setup_resources().
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: tony.luck@intel.com
Cc: linux-pci@vger.kernel.org
Cc: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1465369193-4816-3-git-send-email-rui.y.wang@intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Forcing in_interrupt() to return true if we're not in a bona fide
interrupt confuses the softirq code.  This fixes warnings like:

  NOHZ: local_softirq_pending 282

... which can happen when running things like selftests/x86.

This will change perf's static percpu buffer usage in IST context.
I think this is okay, and it's changing the behavior to match
historical (pre-4.0) behavior.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 95927475 ("x86, traps: Track entry into and exit from IST context")
Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

The device emulation may send segCnt of 1 for LRO packets.
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: Jin Heo <heoj@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Socket option PACKET_FANOUT_DATA takes a struct sock_fprog as argument
if PACKET_FANOUT has mode PACKET_FANOUT_CBPF. This structure contains
a pointer into user memory. If userland is 32-bit and kernel is 64-bit
the two disagree about the layout of struct sock_fprog.

Add compat setsockopt support to convert a 32-bit compat_sock_fprog to
a 64-bit sock_fprog. This is analogous to compat_sock_fprog support for
SO_REUSEPORT added in commit 19575988 ("soreuseport: add compat
case for setsockopt SO_ATTACH_REUSEPORT_CBPF").
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dwmac4_set_umac_addr() takes a struct mac_device_info as
the first parameter, but is being passed a ioaddr instead from
dwmac4_set_filter(). Fix the warning/bug by changing the first
parameter.

drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46:    expected struct mac_device_info *hw
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46:    got void [noderef] <asn:2>*ioaddr

Note, only compile tested this as do not have any
hardware with it in.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G mlx5 fixes for 4.7-rc

The following series provides some small fixes for mlx5 driver.

Two small fixes for the mlx5e netdev, the 1st is for the blue flame
quota accounting and the 2nd is a small refactoring in shutdown flow.

Five trivial fixes for mlx5 E-Switch.
	- Allmulti mc_promisc flag was not set in a specific flow.
	- Modify VF node guid when admin mac is changed.
	- Race in vport enable flow.
	- Misc code fixes (kvfree when needed and error pointers checking).

Three in mlx5 steering area.  Correct capabilities checking and root flow table update.

Three misc fixes in mlx5 commands enum and layouts.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>