Building with -Werror showed another failure:

kernel/bpf/btf.c: In function 'btf_get_prog_ctx_type.isra.31':
kernel/bpf/btf.c:3508:63: error: array subscript 0 is above array bounds of 'u8[0]' {aka 'unsigned char[0]'} [-Werror=array-bounds]
  ctx_type = btf_type_member(conv_struct) + bpf_ctx_convert_map[prog_type] * 2;

I don't actually understand why the array is empty, but a similar
fix has addressed a related problem, so I suppose we can do the
same thing here.

Fixes: ce27709b ("bpf: Fix build in minimal configurations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191210203553.2941035-1-arnd@arndb.de

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in MIPS' JIT compiler to allow
33 tail calls.

Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.com

All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls
limit at runtime.  In addition, a test was recently added, in tailcalls2,
to check this limit.

This patch updates the tail call limit in RISC-V's JIT compiler to allow
33 tail calls.  I tested it using the above selftest on an emulated
RISCV64.

Fixes: 2353ecc6 ("bpf, riscv: add BPF JIT for RV64G")
Reported-by: Mahshid Khezri <khezri.mahshid@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/966fe384383bf23a0ee1efe8d7291c78a3fb832b.1575916815.git.paul.chaignon@gmail.com

In netpoll the napi handler could be called with budget equal to zero.
Current ENA napi handler doesn't take that into consideration.

The napi handler handles Rx packets in a do-while loop.
Currently, the budget check happens only after decrementing the
budget, therefore the napi handler, in rare cases, could run over
MAX_INT packets.

In addition to that, this moves all budget related variables to int
calculation and stop mixing u32 to avoid ambiguity

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tuong Lien says:

====================
tipc: fix some issues

This series consists of some bug-fixes for TIPC.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function 'tipc_disc_rcv()', the 'msg_peer_net_hash()' is called
to read the header data field but after the message skb has been freed,
that might result in a garbage value...

This commit fixes it by defining a new local variable to store the data
first, just like the other header fields' handling.

Fixes: f73b1281 ("tipc: improve throughput between nodes in netns")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a user message is sent, TIPC will check if the socket has faced a
congestion at link layer. If that happens, it will make a sleep to wait
for the congestion to disappear. This leaves a gap for other users to
take over the socket (e.g. multi threads) since the socket is released
as well. Also, in case of connectionless (e.g. SOCK_RDM), user is free
to send messages to various destinations (e.g. via 'sendto()'), then
the socket's preformatted header has to be updated correspondingly
prior to the actual payload message building.

Unfortunately, the latter action is done before the first action which
causes a condition issue that the destination of a certain message can
be modified incorrectly in the middle, leading to wrong destination
when that message is built. Consequently, when the message is sent to
the link layer, it gets stuck there forever because the peer node will
simply reject it. After a number of retransmission attempts, the link
is eventually taken down and the retransmission failure is reported.

This commit fixes the problem by rearranging the order of actions to
prevent the race condition from occurring, so the message building is
'atomic' and its header will not be modified by anyone.

Fixes: 365ad353 ("tipc: reduce risk of user starvation during link congestion")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit c55c8eda ("tipc: smooth change between replicast and
broadcast"), we allow instant switching between replicast and broadcast
by sending a dummy 'SYN' packet on the last used link to synchronize
packets on the links. The 'SYN' message is an object of link congestion
also, so if that happens, a 'SOCK_WAKEUP' will be scheduled to be sent
back to the socket...
However, in that commit, we simply use the same socket 'cong_link_cnt'
counter for both the 'SYN' & normal payload message sending. Therefore,
if both the replicast & broadcast links are congested, the counter will
be not updated correctly but overwritten by the latter congestion.
Later on, when the 'SOCK_WAKEUP' messages are processed, the counter is
reduced one by one and eventually overflowed. Consequently, further
activities on the socket will only wait for the false congestion signal
to disappear but never been met.

Because sending the 'SYN' message is vital for the mechanism, it should
be done anyway. This commit fixes the issue by marking the message with
an error code e.g. 'TIPC_ERR_NO_PORT', so its sending should not face a
link congestion, there is no need to touch the socket 'cong_link_cnt'
either. In addition, in the event of any error (e.g. -ENOBUFS), we will
purge the entire payload message queue and make a return immediately.

Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast")
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current rbtree for service ranges in the name table is built based
on the 'lower' & 'upper' range values resulting in a flaw in the rbtree
searching. Some issues have been observed in case of range overlapping:

Case #1: unable to withdraw a name entry:
After some name services are bound, all of them are withdrawn by user
but one remains in the name table forever. This corrupts the table and
that service becomes dummy i.e. no real port.
E.g.

                /
           {22, 22}
              /
             /
   --->  {10, 50}
           /  \
          /    \
    {10, 30}  {20, 60}

The node {10, 30} cannot be removed since the rbtree searching stops at
the node's ancestor i.e. {10, 50}, so starting from it will never reach
the finding node.

Case #2: failed to send data in some cases:
E.g. Two service ranges: {20, 60}, {10, 50} are bound. The rbtree for
this service will be one of the two cases below depending on the order
of the bindings:

        {20, 60}             {10, 50} <--
          /  \                 /  \
         /    \               /    \
    {10, 50}  NIL <--       NIL  {20, 60}

          (a)                    (b)

Now, try to send some data to service {30}, there will be two results:
(a): Failed, no route to host.
(b): Ok.

The reason is that the rbtree searching will stop at the pointing node
as shown above.

Case #3: Same as case #2b above but if the data sending's scope is
local and the {10, 50} is published by a peer node, then it will result
in 'no route to host' even though the other {20, 60} is for example on
the local node which should be able to get the data.

The issues are actually due to the way we built the rbtree. This commit
fixes it by introducing an additional field to each node - named 'max',
which is the largest 'upper' of that node subtree. The 'max' value for
each subtrees will be propagated correctly whenever a node is inserted/
removed or the tree is rebalanced by the augmented rbtree callbacks.

By this way, we can change the rbtree searching appoarch to solve the
issues above. Another benefit from this is that we can now improve the
searching for a next range matching e.g. in case of multicast, so get
rid of the unneeded looping over all nodes in the tree.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Error recovery fixes.

This patch series contains fixes mostly for the error recovery feature
and related areas.  Please queue the series for -stable also.  Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The VF driver also needs to create the health reporters since
VFs are also involved in firmware reset and recovery.  Modify
bnxt_dl_register() and bnxt_dl_unregister() so that they can
be called by the VFs to register/unregister devlink.  Only the PF
will register the devlink parameters.  With devlink registered,
we can now create the health reporters on the VFs.

Fixes: 6763c779 ("bnxt_en: Add new FW devlink_health_reporter")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the logic to properly check the fw capabilities and create the
devlink health reporters only when needed.  The current code creates
the reporters unconditionally as long as bp->fw_health is valid, and
that's not correct.

Call bnxt_dl_fw_reporters_create() directly from the init and reset
code path instead of from bnxt_dl_register().  This allows the
reporters to be adjusted when capabilities change.  The same
applies to bnxt_dl_fw_reporters_destroy().

Fixes: 6763c779 ("bnxt_en: Add new FW devlink_health_reporter")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After fixing the allocation of bp->fw_health in the previous patch,
the driver will not go through the fw reset and recovery code paths
if bp->fw_health allocation fails.  So we can now remove the
unnecessary NULL checks.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bp->fw_health needs to be allocated for either the firmware initiated
reset feature or the driver initiated error recovery feature.  The
current code is not allocating bp->fw_health for all the necessary cases.
This patch corrects the logic to allocate bp->fw_health correctly when
needed.  If allocation fails, we clear the feature flags.

We also add the the missing kfree(bp->fw_health) when the driver is
unloaded.  If we get an async reset message from the firmware, we also
need to make sure that we have a valid bp->fw_health before proceeding.

Fixes: 07f83d72 ("bnxt_en: Discover firmware error recovery capabilities.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If any change happened in the configuration of VF in VM while
collecting live dump, there could be a race and firmware can return
more data than allocated dump length. Fix it by keeping track of
the accumulated core dump length copied so far and abort the copy
with error code if the next chunk of core dump will exceed the
original dump length.

Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will trigger new context memory to be rediscovered and allocated
during the re-probe process after a firmware reset.  Without this, the
newly reset firmware does not have valid context memory and the driver
will eventually fail to allocate some resources.

Fixes: ec5d31e3 ("bnxt_en: Handle firmware reset status during IF_UP.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The logic needs to check both bp->total_irqs and the reserved IRQs in
hw_resc->resv_irqs if applicable and see if both are enough to cover
the L2 and RDMA requested vectors.  The current code is only checking
bp->total_irqs and can fail in some code paths, such as the TX timeout
code path with the RDMA driver requesting vectors after recovery.  In
this code path, we have not reserved enough MSIX resources for the
RDMA driver yet.

Fixes: 75720e63 ("bnxt_en: Keep track of reserved IRQs.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devm_acpi_dev_add_driver_gpios() returns -ENXIO if CONFIG_ACPI
is disabled (e.g. on device tree platforms).
In this case, nxp-nci will silently fail to probe.

The other NFC drivers only log a debug message if
devm_acpi_dev_add_driver_gpios() fails.
Do the same in nxp-nci to fix this problem.

Fixes: ad0acfd6 ("NFC: nxp-nci: Get rid of code duplication in ->probe()")
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the following command currently fails:

 [root@fedora tc-testing]# ./tdc.py -l
 The following test case IDs are not unique:
 {'6f5e'}
 Please correct them before continuing.

this happens because there are two tests having the same id:

 [root@fedora tc-testing]# grep -r 6f5e tc-tests/*
 tc-tests/actions/pedit.json:        "id": "6f5e",
 tc-tests/filters/basic.json:        "id": "6f5e",

fix it replacing the latest duplicate id with a brand new one:

 [root@fedora tc-testing]# sed -i 's/6f5e//1' tc-tests/filters/basic.json
 [root@fedora tc-testing]# ./tdc.py -i

Fixes: 4717b053 ("tc-testing: Introduced tdc tests for basic filter")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fjes_acpi_add() misses a check for platform_device_register_simple().
Add a check to fix it.

Fixes: 658d439b ("fjes: Introduce FUJITSU Extended Socket Network Device driver")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is softlockup when using TPACKET_V3:
...
NMI watchdog: BUG: soft lockup - CPU#2 stuck for 60010ms!
(__irq_svc) from [<c0558a0c>] (_raw_spin_unlock_irqrestore+0x44/0x54)
(_raw_spin_unlock_irqrestore) from [<c027b7e8>] (mod_timer+0x210/0x25c)
(mod_timer) from [<c0549c30>]
(prb_retire_rx_blk_timer_expired+0x68/0x11c)
(prb_retire_rx_blk_timer_expired) from [<c027a7ac>]
(call_timer_fn+0x90/0x17c)
(call_timer_fn) from [<c027ab6c>] (run_timer_softirq+0x2d4/0x2fc)
(run_timer_softirq) from [<c021eaf4>] (__do_softirq+0x218/0x318)
(__do_softirq) from [<c021eea0>] (irq_exit+0x88/0xac)
(irq_exit) from [<c0240130>] (msa_irq_exit+0x11c/0x1d4)
(msa_irq_exit) from [<c0209cf0>] (handle_IPI+0x650/0x7f4)
(handle_IPI) from [<c02015bc>] (gic_handle_irq+0x108/0x118)
(gic_handle_irq) from [<c0558ee4>] (__irq_usr+0x44/0x5c)
...

If __ethtool_get_link_ksettings() is failed in
prb_calc_retire_blk_tmo(), msec and tmo will be zero, so tov_in_jiffies
is zero and the timer expire for retire_blk_timer is turn to
mod_timer(&pkc->retire_blk_timer, jiffies + 0),
which will trigger cpu usage of softirq is 100%.

Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Tested-by: Xiao Jiangfeng <xiaojiangfeng@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TI CPSW(s) driver produces warning with DMA API debug options enabled:

WARNING: CPU: 0 PID: 1033 at kernel/dma/debug.c:1025 check_unmap+0x4a8/0x968
DMA-API: cpsw 48484000.ethernet: device driver frees DMA memory with different size
 [device address=0x00000000abc6aa02] [map size=64 bytes] [unmap size=42 bytes]
CPU: 0 PID: 1033 Comm: ping Not tainted 5.3.0-dirty #41
Hardware name: Generic DRA72X (Flattened Device Tree)
[<c0112c60>] (unwind_backtrace) from [<c010d270>] (show_stack+0x10/0x14)
[<c010d270>] (show_stack) from [<c09bc564>] (dump_stack+0xd8/0x110)
[<c09bc564>] (dump_stack) from [<c013b93c>] (__warn+0xe0/0x10c)
[<c013b93c>] (__warn) from [<c013b9ac>] (warn_slowpath_fmt+0x44/0x6c)
[<c013b9ac>] (warn_slowpath_fmt) from [<c01e0368>] (check_unmap+0x4a8/0x968)
[<c01e0368>] (check_unmap) from [<c01e08a8>] (debug_dma_unmap_page+0x80/0x90)
[<c01e08a8>] (debug_dma_unmap_page) from [<c0752414>] (__cpdma_chan_free+0x114/0x16c)
[<c0752414>] (__cpdma_chan_free) from [<c07525c4>] (__cpdma_chan_process+0x158/0x17c)
[<c07525c4>] (__cpdma_chan_process) from [<c0753690>] (cpdma_chan_process+0x3c/0x5c)
[<c0753690>] (cpdma_chan_process) from [<c0758660>] (cpsw_tx_mq_poll+0x48/0x94)
[<c0758660>] (cpsw_tx_mq_poll) from [<c0803018>] (net_rx_action+0x108/0x4e4)
[<c0803018>] (net_rx_action) from [<c010230c>] (__do_softirq+0xec/0x598)
[<c010230c>] (__do_softirq) from [<c0143914>] (do_softirq.part.4+0x68/0x74)
[<c0143914>] (do_softirq.part.4) from [<c0143a44>] (__local_bh_enable_ip+0x124/0x17c)
[<c0143a44>] (__local_bh_enable_ip) from [<c0871590>] (ip_finish_output2+0x294/0xb7c)
[<c0871590>] (ip_finish_output2) from [<c0875440>] (ip_output+0x210/0x364)
[<c0875440>] (ip_output) from [<c0875e2c>] (ip_send_skb+0x1c/0xf8)
[<c0875e2c>] (ip_send_skb) from [<c08a7fd4>] (raw_sendmsg+0x9a8/0xc74)
[<c08a7fd4>] (raw_sendmsg) from [<c07d6b90>] (sock_sendmsg+0x14/0x24)
[<c07d6b90>] (sock_sendmsg) from [<c07d8260>] (__sys_sendto+0xbc/0x100)
[<c07d8260>] (__sys_sendto) from [<c01011ac>] (__sys_trace_return+0x0/0x14)
Exception stack(0xea9a7fa8 to 0xea9a7ff0)
...

The reason is that cpdma_chan_submit_si() now stores original buffer length
(sw_len) in CPDMA descriptor instead of adjusted buffer length (hw_len)
used to map the buffer.

Hence, fix an issue by passing correct buffer length in CPDMA descriptor.

Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Fixes: 6670acac ("net: ethernet: ti: davinci_cpdma: add dma mapped submit")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Wait for rcu grace period after releasing netns in ctnetlink,
   from Florian Westphal.

2) Incorrect command type in flowtable offload ndo invocation,
   from wenxu.

3) Incorrect callback type in flowtable offload flow tuple
   updates, also from wenxu.

4) Fix compile warning on flowtable offload infrastructure due to
   possible reference to uninitialized variable, from Nathan Chancellor.

5) Do not inline nf_ct_resolve_clash(), this is called from slow
   path / stress situations. From Florian Westphal.

6) Missing IPv6 flow selector description in flowtable offload.

7) Missing check for NETDEV_UNREGISTER in nf_tables offload
   infrastructure, from wenxu.

8) Update NAT selftest to use randomized netns names, from
   Florian Westphal.

9) Restore nfqueue bridge support, from Marco Oliverio.

10) Compilation warning in SCTP_CHUNKMAP_*() on xt_sctp header.
    From Phil Sutter.

11) Fix bogus lookup/get match for non-anonymous rbtree sets.

12) Missing netlink validation for NFT_SET_ELEM_INTERVAL_END
    elements.

13) Missing netlink validation for NFT_DATA_VALUE after
    nft_data_init().

14) If rule specifies no actions, offload infrastructure returns
    EOPNOTSUPP.

15) Module refcount leak in object updates.

16) Missing sanitization for ARP traffic from br_netfilter, from
    Eric Dumazet.

17) Compilation breakage on big-endian due to incorrect memcpy()
    size in the flowtable offload infrastructure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In function 'memcpy',
     inlined from 'flow_offload_mangle' at net/netfilter/nf_flow_table_offload.c:112:2,
     inlined from 'flow_offload_port_dnat' at net/netfilter/nf_flow_table_offload.c:373:2,
     inlined from 'nf_flow_rule_route_ipv4' at net/netfilter/nf_flow_table_offload.c:424:3:
./include/linux/string.h:376:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
   376 |    __read_overflow2();
       |    ^~~~~~~~~~~~~~~~~~

The original u8* was done in the hope to make this more adaptable but
consensus is to keep this like it is in tc pedit.

Fixes: c29f74e0 ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This is needed, because if the flag X25_ACCPT_APPRV_FLAG is not set on a
socket (manual call confirmation) and the channel is cleared by remote
before the manual call confirmation was sent, this situation needs to
be handled.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating the second host in h2_create(), two addresses are assigned
to the interface, but only one is deleted. When running the test twice
in a row the following error is observed:

$ ./router_bridge_vlan.sh
TEST: ping                                                          [ OK ]
TEST: ping6                                                         [ OK ]
TEST: vlan                                                          [ OK ]
$ ./router_bridge_vlan.sh
RTNETLINK answers: File exists
TEST: ping                                                          [ OK ]
TEST: ping6                                                         [ OK ]
TEST: vlan                                                          [ OK ]

Fix this by deleting the address during cleanup.

Fixes: 5b1e7f9e ("selftests: forwarding: Test routed bridge interface")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case the driver vetoes the addition of an IPv6 multipath route, the
IPv6 stack will emit delete notifications for the sibling routes that
were already added to the FIB trie. Since these siblings are not present
in hardware, a warning will be generated.

Have the driver ignore notifications for routes it does not have.

Fixes: ebee3cad ("ipv6: Add IPv6 multipath notifications for add / replace")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzbot found a crash:

  BUG: KMSAN: uninit-value in crc32_body lib/crc32.c:112 [inline]
  BUG: KMSAN: uninit-value in crc32_le_generic lib/crc32.c:179 [inline]
  BUG: KMSAN: uninit-value in __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202
  Call Trace:
    crc32_body lib/crc32.c:112 [inline]
    crc32_le_generic lib/crc32.c:179 [inline]
    __crc32c_le_base+0x4fa/0xd30 lib/crc32.c:202
    chksum_update+0xb2/0x110 crypto/crc32c_generic.c:90
    crypto_shash_update+0x4c5/0x530 crypto/shash.c:107
    crc32c+0x150/0x220 lib/libcrc32c.c:47
    sctp_csum_update+0x89/0xa0 include/net/sctp/checksum.h:36
    __skb_checksum+0x1297/0x12a0 net/core/skbuff.c:2640
    sctp_compute_cksum include/net/sctp/checksum.h:59 [inline]
    sctp_packet_pack net/sctp/output.c:528 [inline]
    sctp_packet_transmit+0x40fb/0x4250 net/sctp/output.c:597
    sctp_outq_flush_transports net/sctp/outqueue.c:1146 [inline]
    sctp_outq_flush+0x1823/0x5d80 net/sctp/outqueue.c:1194
    sctp_outq_uncork+0xd0/0xf0 net/sctp/outqueue.c:757
    sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1781 [inline]
    sctp_side_effects net/sctp/sm_sideeffect.c:1184 [inline]
    sctp_do_sm+0x8fe1/0x9720 net/sctp/sm_sideeffect.c:1155
    sctp_primitive_REQUESTHEARTBEAT+0x175/0x1a0 net/sctp/primitive.c:185
    sctp_apply_peer_addr_params+0x212/0x1d40 net/sctp/socket.c:2433
    sctp_setsockopt_peer_addr_params net/sctp/socket.c:2686 [inline]
    sctp_setsockopt+0x189bb/0x19090 net/sctp/socket.c:4672

The issue was caused by transport->ipaddr set with uninit addr param, which
was passed by:

  sctp_transport_init net/sctp/transport.c:47 [inline]
  sctp_transport_new+0x248/0xa00 net/sctp/transport.c:100
  sctp_assoc_add_peer+0x5ba/0x2030 net/sctp/associola.c:611
  sctp_process_param net/sctp/sm_make_chunk.c:2524 [inline]

where 'addr' is set by sctp_v4_from_addr_param(), and it doesn't initialize
the padding of addr->v4.

Later when calling sctp_make_heartbeat(), hbinfo.daddr(=transport->ipaddr)
will become the part of skb, and the issue occurs.

This patch is to fix it by initializing the padding of addr->v4 in
sctp_v4_from_addr_param(), as well as other functions that do the similar
thing, and these functions shouldn't trust that the caller initializes the
memory, as Marcelo suggested.

Reported-by: syzbot+6dcbfea81cd3d4dd0b02@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1) syzbot reported an uninit-value in bond_neigh_setup() [1]

 bond_neigh_setup() uses a temporary on-stack 'struct neigh_parms parms',
 but only clears parms.neigh_setup field.

 A stacked bonding device would then enter bond_neigh_setup()
 and read garbage from parms->dev.

 If we get really unlucky and garbage is matching @dev, then we
 could recurse and eventually crash.

 Let's make sure the whole structure is cleared to avoid surprises.

2) bond_neigh_setup() can be called while another cpu manipulates
 the master device, removing or adding a slave.
 We need at least rcu protection to prevent use-after-free.

Note: Prior code does not support a stack of bonding devices,
      this patch does not attempt to fix this, and leave a comment instead.

[1]

BUG: KMSAN: uninit-value in bond_neigh_setup+0xa4/0x110 drivers/net/bonding/bond_main.c:3655
CPU: 0 PID: 11256 Comm: syz-executor.0 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
 __msan_warning+0x57/0xa0 mm/kmsan/kmsan_instr.c:245
 bond_neigh_setup+0xa4/0x110 drivers/net/bonding/bond_main.c:3655
 bond_neigh_init+0x216/0x4b0 drivers/net/bonding/bond_main.c:3626
 ___neigh_create+0x169e/0x2c40 net/core/neighbour.c:613
 __neigh_create+0xbd/0xd0 net/core/neighbour.c:674
 ip6_finish_output2+0x149a/0x2670 net/ipv6/ip6_output.c:113
 __ip6_finish_output+0x83d/0x8f0 net/ipv6/ip6_output.c:142
 ip6_finish_output+0x2db/0x420 net/ipv6/ip6_output.c:152
 NF_HOOK_COND include/linux/netfilter.h:294 [inline]
 ip6_output+0x5d3/0x720 net/ipv6/ip6_output.c:175
 dst_output include/net/dst.h:436 [inline]
 NF_HOOK include/linux/netfilter.h:305 [inline]
 mld_sendpack+0xebd/0x13d0 net/ipv6/mcast.c:1682
 mld_send_cr net/ipv6/mcast.c:1978 [inline]
 mld_ifc_timer_expire+0x116b/0x1680 net/ipv6/mcast.c:2477
 call_timer_fn+0x232/0x530 kernel/time/timer.c:1404
 expire_timers kernel/time/timer.c:1449 [inline]
 __run_timers+0xd60/0x1270 kernel/time/timer.c:1773
 run_timer_softirq+0x2d/0x50 kernel/time/timer.c:1786
 __do_softirq+0x4a1/0x83a kernel/softirq.c:293
 invoke_softirq kernel/softirq.c:375 [inline]
 irq_exit+0x230/0x280 kernel/softirq.c:416
 exiting_irq+0xe/0x10 arch/x86/include/asm/apic.h:536
 smp_apic_timer_interrupt+0x48/0x70 arch/x86/kernel/apic/apic.c:1138
 apic_timer_interrupt+0x2e/0x40 arch/x86/entry/entry_64.S:835
 </IRQ>
RIP: 0010:kmsan_free_page+0x18d/0x1c0 mm/kmsan/kmsan_shadow.c:439
Code: 4c 89 ff 44 89 f6 e8 82 0d ee ff 65 ff 0d 9f 26 3b 60 65 8b 05 98 26 3b 60 85 c0 75 24 e8 5b f6 35 ff 4c 89 6d d0 ff 75 d0 9d <48> 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 0f 0b 0f 0b 0f
RSP: 0018:ffffb328034af818 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000000 RBX: ffffe2d7471f8360 RCX: 0000000000000000
RDX: ffffffffadea7000 RSI: 0000000000000004 RDI: ffff93496fcda104
RBP: ffffb328034af850 R08: ffff934a47e86d00 R09: ffff93496fc41900
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000246 R14: 0000000000000000 R15: ffffe2d7472225c0
 free_pages_prepare mm/page_alloc.c:1138 [inline]
 free_pcp_prepare mm/page_alloc.c:1230 [inline]
 free_unref_page_prepare+0x1d9/0x770 mm/page_alloc.c:3025
 free_unref_page mm/page_alloc.c:3074 [inline]
 free_the_page mm/page_alloc.c:4832 [inline]
 __free_pages+0x154/0x230 mm/page_alloc.c:4840
 __vunmap+0xdac/0xf20 mm/vmalloc.c:2277
 __vfree mm/vmalloc.c:2325 [inline]
 vfree+0x7c/0x170 mm/vmalloc.c:2355
 copy_entries_to_user net/ipv6/netfilter/ip6_tables.c:883 [inline]
 get_entries net/ipv6/netfilter/ip6_tables.c:1041 [inline]
 do_ip6t_get_ctl+0xfa4/0x1030 net/ipv6/netfilter/ip6_tables.c:1709
 nf_sockopt net/netfilter/nf_sockopt.c:104 [inline]
 nf_getsockopt+0x481/0x4e0 net/netfilter/nf_sockopt.c:122
 ipv6_getsockopt+0x264/0x510 net/ipv6/ipv6_sockglue.c:1400
 tcp_getsockopt+0x1c6/0x1f0 net/ipv4/tcp.c:3688
 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3110
 __sys_getsockopt+0x533/0x7b0 net/socket.c:2129
 __do_sys_getsockopt net/socket.c:2144 [inline]
 __se_sys_getsockopt+0xe1/0x100 net/socket.c:2141
 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2141
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45d20a
Code: b8 34 01 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 8d 8b fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 6a 8b fb ff c3 66 0f 1f 84 00 00 00 00 00
RSP: 002b:0000000000a6f618 EFLAGS: 00000212 ORIG_RAX: 0000000000000037
RAX: ffffffffffffffda RBX: 0000000000a6f640 RCX: 000000000045d20a
RDX: 0000000000000041 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 0000000000717cc0 R08: 0000000000a6f63c R09: 0000000000004000
R10: 0000000000a6f740 R11: 0000000000000212 R12: 0000000000000003
R13: 0000000000000000 R14: 0000000000000029 R15: 0000000000715b00

Local variable description: ----parms@bond_neigh_init
Variable was created at:
 bond_neigh_init+0x8c/0x4b0 drivers/net/bonding/bond_main.c:3617
 bond_neigh_init+0x8c/0x4b0 drivers/net/bonding/bond_main.c:3617

Fixes: 9918d5bf ("bonding: modify only neigh_parms owned by us")
Fixes: 234bcf8a ("net/bonding: correctly proxy slave neigh param setup ndo function")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

neigh_cleanup() has not been used for seven years, and was a wrong design.

Messing with shared pointer in bond_neigh_init() without proper
memory barriers would at least trigger syzbot complains eventually.

It is time to remove this stuff.

Fixes: b63b70d8 ("IPoIB: Use a private hash table for path lookup in xmit path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.5-20191208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2019-12-08

this is a pull request of 13 patches for net/master.

The first two patches are by Dan Murphy. He adds himself as a maintainer to the
m-can MMIO and tcan SPI driver.

The next two patches the j1939 stack. The first one is by Oleksij Rempel and
fixes a locking problem found by the syzbot, the second one is by me an fixes a
mistake in the documentation.

Srinivas Neeli fixes missing RX CAN packets on CANFD2.0 in the xilinx driver.

Sean Nyekjaer fixes a possible deadlock in the the flexcan driver after
suspend/resume. Joakim Zhang contributes two patches for the flexcan driver
that fix problems with the low power enter/exit.

The next 4 patches all target the tcan part of the m_can driver. Sean Nyekjaer
adds the required delay after reset and fixes the device tree binding example.
Dan Murphy's patches make the wake-gpio optional.

In the last patch Xiaolong Huang fixes several kernel memory info leaks to the
USB device in the kvaser_usb_leaf driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot is kind enough to remind us we need to call skb_may_pull()

BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108
 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245
 br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665
 nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline]
 nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512
 nf_hook include/linux/netfilter.h:260 [inline]
 NF_HOOK include/linux/netfilter.h:303 [inline]
 __br_forward+0x78f/0xe30 net/bridge/br_forward.c:109
 br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234
 br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162
 nf_hook_bridge_pre net/bridge/br_input.c:245 [inline]
 br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348
 __netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830
 __netif_receive_skb_one_core net/core/dev.c:4927 [inline]
 __netif_receive_skb net/core/dev.c:5043 [inline]
 process_backlog+0x610/0x13c0 net/core/dev.c:5874
 napi_poll net/core/dev.c:6311 [inline]
 net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379
 __do_softirq+0x4a1/0x83a kernel/softirq.c:293
 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091
 </IRQ>
 do_softirq kernel/softirq.c:338 [inline]
 __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190
 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
 rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline]
 __dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819
 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825
 packet_snd net/packet/af_packet.c:2959 [inline]
 packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45a679
Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679
RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003
RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4
R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline]
 kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132
 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86
 slab_alloc_node mm/slub.c:2773 [inline]
 __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381
 __kmalloc_reserve net/core/skbuff.c:141 [inline]
 __alloc_skb+0x306/0xa10 net/core/skbuff.c:209
 alloc_skb include/linux/skbuff.h:1049 [inline]
 alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662
 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244
 packet_alloc_skb net/packet/af_packet.c:2807 [inline]
 packet_snd net/packet/af_packet.c:2902 [inline]
 packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg net/socket.c:657 [inline]
 __sys_sendto+0xc44/0xc70 net/socket.c:1952
 __do_sys_sendto net/socket.c:1964 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1960
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960
 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c4e70a87 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

If the rule only specifies the matching side, return EOPNOTSUPP.
Otherwise, the front-end relies on the drivers to reject this rule.

Fixes: c9626a2c ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Use __nft_obj_type_get() instead, otherwise there is a module reference
counter leak.

Fixes: d62d0ba9 ("netfilter: nf_tables: Introduce stateful object update operation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Userspace might bogusly sent NFT_DATA_VERDICT in several netlink
attributes that assume NFT_DATA_VALUE. Moreover, make sure that error
path invokes nft_data_release() to decrement the reference count on the
chain object.

Fixes: 96518518 ("netfilter: add nftables")
Fixes: 0f3cd9b3 ("netfilter: nf_tables: add range expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Only NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_FLAGS make sense for elements
whose NFT_SET_ELEM_INTERVAL_END flag is set on.

Fixes: 96518518 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The existing rbtree implementation might store consecutive elements
where the closing element and the opening element might overlap, eg.

	[ a, a+1) [ a+1, a+2)

This patch removes the optimization for non-anonymous sets in the exact
matching case, where it is assumed to stop searching in case that the
closing element is found. Instead, invalidate candidate interval and
keep looking further in the tree.

The lookup/get operation might return false, while there is an element
in the rbtree. Moreover, the get operation returns true as if a+2 would
be in the tree. This happens with named sets after several set updates.

The existing lookup optimization (that only works for the anonymous
sets) might not reach the opening [ a+1,... element if the closing
...,a+1) is found in first place when walking over the rbtree. Hence,
walking the full tree in that case is needed.

This patch fixes the lookup and get operations.

Fixes: e701001e ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates")
Fixes: ba0e4d99 ("netfilter: nf_tables: get set elements via netlink")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is
undefined for the signed 32-bit value 1. Avoid this by declaring 1 as
unsigned.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull networking fixes from David Miller:

 1) More jumbo frame fixes in r8169, from Heiner Kallweit.

 2) Fix bpf build in minimal configuration, from Alexei Starovoitov.

 3) Use after free in slcan driver, from Jouni Hogander.

 4) Flower classifier port ranges don't work properly in the HW offload
    case, from Yoshiki Komachi.

 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.

 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.

 7) Fix flow dissection in dsa TX path, from Alexander Lobakin.

 8) Stale syncookie timestampe fixes from Guillaume Nault.

[ Did an evil merge to silence a warning introduced by this pull - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  r8169: fix rtl_hw_jumbo_disable for RTL8168evl
  net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
  r8169: add missing RX enabling for WoL on RTL8125
  vhost/vsock: accept only packets with the right dst_cid
  net: phy: dp83867: fix hfs boot in rgmii mode
  net: ethernet: ti: cpsw: fix extra rx interrupt
  inet: protect against too small mtu values.
  gre: refetch erspan header from skb->data after pskb_may_pull()
  pppoe: remove redundant BUG_ON() check in pppoe_pernet
  tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
  tcp: tighten acceptance of ACKs not matching a child socket
  tcp: fix rejected syncookies due to stale timestamps
  lpc_eth: kernel BUG on remove
  tcp: md5: fix potential overestimation of TCP option space
  net: sched: allow indirect blocks to bind to clsact in TC
  net: core: rename indirect block ingress cb function
  net-sysfs: Call dev_hold always in netdev_queue_add_kobject
  net: dsa: fix flow dissection on Tx path
  net/tls: Fix return values to avoid ENOTSUPP
  net: avoid an indirect call in ____sys_recvmsg()
  ...