- 11 Aug, 2020 8 commits
-
-
Johannes Thumshirn authored
Update the zonefs documentation to reflect the difference between a zone's size and it's capacity. The maximum file size in zonefs is the zones capacity, for ZBC and ZAC based devices, which do not have a separate zone capacity, the zone capacity is equal to the zone size. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com>
-
Johannes Thumshirn authored
In the zoned storage model, the sectors within a zone are typically all writeable. With the introduction of the Zoned Namespace (ZNS) Command Set in the NVM Express organization, the model was extended to have a specific writeable capacity. This zone capacity can be less than the overall zone size for a NVMe ZNS device or null_blk in zoned-mode. For other ZBC/ZAC devices the zone capacity is always equal to the zone size. Use the zone capacity field instead from blk_zone for determining the maximum inode size and inode blocks in zonefs. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull perf tools updates from Arnaldo Carvalho de Melo: "New features: - Introduce controlling how 'perf stat' and 'perf record' works via a control file descriptor, allowing starting with events configured but disabled until commands are received via the control file descriptor. This allows, for instance for tools such as Intel VTune to make further use of perf as its Linux platform driver. - Improve 'perf record' to to register in a perf.data file header the clockid used to help later correlate things like syslog files and perf events recorded. - Add basic syscall and find_next_bit benchmarks to 'perf bench'. - Allow using computed metrics in calculating other metrics. For instance: { .metric_expr = "l2_rqsts.demand_data_rd_hit + l2_rqsts.pf_hit + l2_rqsts.rfo_hit", .metric_name = "DCache_L2_All_Hits", }, { .metric_expr = "max(l2_rqsts.all_demand_data_rd - l2_rqsts.demand_data_rd_hit, 0) + l2_rqsts.pf_miss + l2_rqsts.rfo_miss", .metric_name = "DCache_L2_All_Miss", }, { .metric_expr = "dcache_l2_all_hits + dcache_l2_all_miss", .metric_name = "DCache_L2_All", } - Add suport for 'd_ratio', '>' and '<' operators to the expression resolver used in calculating metrics in 'perf stat'. Support for new kernel features: - Support TEXT_POKE and KSYMBOL_TYPE_OOL perf metadata events to cope with things like ftrace, trampolines, i.e. changes in the kernel text that gets in the way of properly decoding Intel PT hardware traces, for instance. Intel PT: - Add various knobs to reduce the volume of Intel PT traces by reducing the level of details such as decoding just some types of packets (e.g., FUP/TIP, PSB+), also filtering by time range. - Add new itrace options (log flags to the 'd' option, error flags to the 'e' one, etc), controlling how Intel PT is transformed into perf events, document some missing options (e.g., how to synthesize callchains). BPF: - Properly report BPF errors when parsing events. - Do not setup side-band events if LIBBPF is not linked, fixing a segfault. Libraries: - Improvements to the libtraceevent plugin mechanism. - Improve libtracevent support for KVM trace events SVM exit reasons. - Add a libtracevent plugins for decoding syscalls/sys_enter_futex and for tlb_flush. - Ensure sample_period is set libpfm4 events in 'perf test'. - Fixup libperf namespacing, to make sure what is in libperf has the perf_ namespace while what is now only in tools/perf/ doesn't use that prefix. Arch specific: - Improve the testing of vendor events and metrics in 'perf test'. - Allow no ARM CoreSight hardware tracer sink to be specified on command line. - Fix arm_spe_x recording when mixed with other perf events. - Add s390 idle functions 'psw_idle' and 'psw_idle_exit' to list of idle symbols. - List kernel supplied event aliases for arm64 in 'perf list'. - Add support for extended register capability in PowerPC 9 and 10. - Added nest IMC power9 metric events. Miscellaneous: - No need to setup sample_regs_intr/sample_regs_user for dummy events. - Update various copies of kernel headers, some causing perf to handle new syscalls, MSRs, etc. - Improve usage of flex and yacc, enabling warnings and addressing the fallout. - Add missing '--output' option to 'perf kmem' so that it can pass it along to 'perf record'. - 'perf probe' fixes related to adding multiple probes on the same address for the same event. - Make 'perf probe' warn if the target function is a GNU indirect function. - Remove //anon mmap events from 'perf inject jit' to fix supporting both using ELF files for generated functions and the perf-PID.map approaches" * tag 'perf-tools-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (144 commits) perf record: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set perf tools powerpc: Add support for extended regs in power10 perf tools powerpc: Add support for extended register capability tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools arch x86: Sync asm/cpufeatures.h with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: update linux/in.h copy tools headers API: Update close_range affected files perf script: Add 'tod' field to display time of day perf script: Change the 'enum perf_output_field' enumerators to be 64 bits perf data: Add support to store time of day in CTF data conversion perf tools: Move clockid_res_ns under clock struct perf header: Store clock references for -k/--clockid option perf tools: Add clockid_name function perf clockid: Move parse_clockid() to new clockid object tools lib traceevent: Handle possible strdup() error in tep_add_plugin_path() API libtraceevent: Fixed description of tep_add_plugin_path() API libtraceevent: Fixed type in PRINT_FMT_STING libtraceevent: Fixed broken indentation in parse_ip4_print_args() libtraceevent: Improve error handling of tep_plugin_add_option() API ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktestLinus Torvalds authored
Pull ktest updates from Steven Rostedt: - Have config-bisect save the good/bad configs at each step. - Show log file location even on success - Add PRE_TEST_DIE to kill test if the PRE_TEST fails - Add a NOT operator for conditionals in config file - Add the log output of the last test when emailing on failure. - Other minor clean ups and small fixes. * tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest.pl: Fix spelling mistake "Cant" -> "Can't" ktest.pl: Change the logic to control the size of the log file emailed ktest.pl: Add MAIL_MAX_SIZE to limit the amount of log emailed ktest.pl: Add the log of last test in email on failure ktest.pl: Turn off buffering to the log file ktest.pl: Just open up the log file once ktest.pl: Add a NOT operator ktest.pl: Define PRE_TEST_DIE to kill the test if the PRE_TEST fails ktest.pl: Always show log file location if defined even on success ktest.pl: Have config-bisect save each config used in the bisect
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking updates from Thomas Gleixner: "A set of locking fixes and updates: - Untangle the header spaghetti which causes build failures in various situations caused by the lockdep additions to seqcount to validate that the write side critical sections are non-preemptible. - The seqcount associated lock debug addons which were blocked by the above fallout. seqcount writers contrary to seqlock writers must be externally serialized, which usually happens via locking - except for strict per CPU seqcounts. As the lock is not part of the seqcount, lockdep cannot validate that the lock is held. This new debug mechanism adds the concept of associated locks. sequence count has now lock type variants and corresponding initializers which take a pointer to the associated lock used for writer serialization. If lockdep is enabled the pointer is stored and write_seqcount_begin() has a lockdep assertion to validate that the lock is held. Aside of the type and the initializer no other code changes are required at the seqcount usage sites. The rest of the seqcount API is unchanged and determines the type at compile time with the help of _Generic which is possible now that the minimal GCC version has been moved up. Adding this lockdep coverage unearthed a handful of seqcount bugs which have been addressed already independent of this. While generally useful this comes with a Trojan Horse twist: On RT kernels the write side critical section can become preemtible if the writers are serialized by an associated lock, which leads to the well known reader preempts writer livelock. RT prevents this by storing the associated lock pointer independent of lockdep in the seqcount and changing the reader side to block on the lock when a reader detects that a writer is in the write side critical section. - Conversion of seqcount usage sites to associated types and initializers" * tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) locking/seqlock, headers: Untangle the spaghetti monster locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header x86/headers: Remove APIC headers from <asm/smp.h> seqcount: More consistent seqprop names seqcount: Compress SEQCNT_LOCKNAME_ZERO() seqlock: Fold seqcount_LOCKNAME_init() definition seqlock: Fold seqcount_LOCKNAME_t definition seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g hrtimer: Use sequence counter with associated raw spinlock kvm/eventfd: Use sequence counter with associated spinlock userfaultfd: Use sequence counter with associated spinlock NFSv4: Use sequence counter with associated spinlock iocost: Use sequence counter with associated spinlock raid5: Use sequence counter with associated spinlock vfs: Use sequence counter with associated spinlock timekeeping: Use sequence counter with associated raw spinlock xfrm: policy: Use sequence counters with associated lock netfilter: nft_set_rbtree: Use sequence counter with associated rwlock netfilter: conntrack: Use sequence counter with associated spinlock sched: tasks: Use sequence counter with associated spinlock ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this round, we've added two small interfaces: (a) GC_URGENT_LOW mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for security. The new GC mode allows Android to run some lower priority GCs in background, while new ioctl discards user information without race condition when the account is removed. In addition, some patches were merged to address latency-related issues. We've fixed some compression-related bug fixes as well as edge race conditions. Enhancements: - add GC_URGENT_LOW mode in gc_urgent - introduce F2FS_IOC_SEC_TRIM_FILE ioctl - bypass racy readahead to improve read latencies - shrink node_write lock coverage to avoid long latency Bug fixes: - fix missing compression flag control, i_size, and mount option - fix deadlock between quota writes and checkpoint - remove inode eviction path in synchronous path to avoid deadlock - fix to wait GCed compressed page writeback - fix a kernel panic in f2fs_is_compressed_page - check page dirty status before writeback - wait page writeback before update in node page write flow - fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry We've added some minor sanity checks and refactored trivial code blocks for better readability and debugging information" * tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits) f2fs: prepare a waiter before entering io_schedule f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive f2fs: replace test_and_set/clear_bit() with set/clear_bit() f2fs: make file immutable even if releasing zero compression block f2fs: compress: disable compression mount option if compression is off f2fs: compress: add sanity check during compressed cluster read f2fs: use macro instead of f2fs verity version f2fs: fix deadlock between quota writes and checkpoint f2fs: correct comment of f2fs_exist_written_data f2fs: compress: delay temp page allocation f2fs: compress: fix to update isize when overwriting compressed file f2fs: space related cleanup f2fs: fix use-after-free issue f2fs: Change the type of f2fs_flush_inline_data() to void f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl f2fs: should avoid inode eviction in synchronous path f2fs: segment.h: delete a duplicated word f2fs: compress: fix to avoid memory leak on cc->cpages f2fs: use generic names for generic ioctls f2fs: don't keep meta inode pages used for compressed block migration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Make sure transactions won't be started recursively in gfs2_block_zero_range (bug introduced in 5.4 when switching to iomap_zero_range) - Fix a glock holder refcount leak introduced in the iopen glock locking scheme rework merged in 5.8. - A few other small improvements (debugging, stack usage, comment fixes). * tag 'gfs2-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: When gfs2_dirty_inode gets a glock error, dump the glock gfs2: Never call gfs2_block_zero_range with an open transaction gfs2: print details on transactions that aren't properly ended gfs2: Fix inaccurate comment fs: Fix typo in comment gfs2: Fix refcount leak in gfs2_glock_poke gfs2: Pass glock holder to gfs2_file_direct_{read,write} gfs2: Add some flags missing from glock output
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifsLinus Torvalds authored
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger: "JFFS2: - Fix for a corner case while mounting - Fix for an use-after-free issue UBI: - Fix for a memory load while attaching - Don't produce an anchor PEB with fastmap being disabled UBIFS: - Fix for orphan inode logic - Spelling fixes - New mount option to specify filesystem version" * tag 'for-linus-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: fix UAF problem jffs2: fix jffs2 mounting failure ubifs: Fix wrong orphan node deletion in ubifs_jnl_update|rename ubi: fastmap: Free fastmap next anchor peb during detach ubi: fastmap: Don't produce the initial next anchor PEB when fastmap is disabled ubifs: misc.h: delete a duplicated word ubifs: add option to specify version for new file systems
-
- 10 Aug, 2020 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - fix for some modern devices that return multi-byte battery report, from Grant Likely - fix for devices with Resolution Multiplier, from Peter Hutterer - device probing speed increase, from Dmitry Torokhov - ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede - other small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: quirks: add NOGET quirk for Logitech GROUP HID: Replace HTTP links with HTTPS ones HID: udraw-ps3: Replace HTTP links with HTTPS ones HID: mcp2221: Replace HTTP links with HTTPS ones HID: input: Fix devices that return multiple bytes in battery report HID: lenovo: Fix spurious F23 key press report during resume from suspend HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard fn_lock support HID: lenovo: Add ThinkPad 10 Ultrabook Keyboard support HID: lenovo: Rename fn_lock sysfs attr handlers to make them generic HID: lenovo: Factor out generic parts of the LED code HID: lenovo: Merge tpkbd and cptkbd data structures HID: intel-ish-hid: Replace PCI_DEV_FLAGS_NO_D3 with pci_save_state HID: Wiimote: Treat the d-pad as an analogue stick HID: input: do not run GET_REPORT unless there's a Resolution Multiplier HID: usbhid: remove redundant assignment to variable retval HID: usbhid: do not sleep when opening device
-
Colin Ian King authored
There is a spelling mistake in an error message. Fix it. Link: https://lkml.kernel.org/r/20200810100750.61475-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
If the log file for a given test is larger than the max size given then use set the seek from the end of the log file instead of from the start of the test. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Jiri Kosina authored
-
Jiri Kosina authored
- ThinkPad 10 Ultrabook Keyboard support, from Hans de Goede
-
Jiri Kosina authored
-
Jiri Kosina authored
- fix for some modern devices that return multi-byte battery report, from Grant Likely - fix for devices with Resolution Multiplier, from Peter Hutterer - device probing speed increase, from Dmitry Torokhov
-
- 09 Aug, 2020 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull Kbuild updates from Masahiro Yamada: - run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled kbuild: introduce hostprogs-always-y and userprogs-always-y kbuild: sort hostprogs before passing it to ifneq kbuild: move host .so build rules to scripts/gcc-plugins/Makefile kbuild: Replace HTTP links with HTTPS ones kbuild: trace functions in subdirectories of lib/ kbuild: introduce ccflags-remove-y and asflags-remove-y kbuild: do not export LDFLAGS_vmlinux kbuild: always create directories of targets powerpc/boot: add DTB to 'targets' kbuild: buildtar: add dtbs support kbuild: remove cc-option test of -ffreestanding kbuild: remove cc-option test of -fno-stack-protector Revert "kbuild: Create directory for target DTB" kbuild: run the checker after the compiler
-
git://git.linux-nfs.org/projects/cel/cel-2.6Linus Torvalds authored
Pull NFS server updates from Chuck Lever: "Highlights: - Support for user extended attributes on NFS (RFC 8276) - Further reduce unnecessary NFSv4 delegation recalls Notable fixes: - Fix recent krb5p regression - Address a few resource leaks and a rare NULL dereference Other: - De-duplicate RPC/RDMA error handling and other utility functions - Replace storage and display of kernel memory addresses by tracepoints" * tag 'nfsd-5.9' of git://git.linux-nfs.org/projects/cel/cel-2.6: (38 commits) svcrdma: CM event handler clean up svcrdma: Remove transport reference counting svcrdma: Fix another Receive buffer leak SUNRPC: Refresh the show_rqstp_flags() macro nfsd: netns.h: delete a duplicated word SUNRPC: Fix ("SUNRPC: Add "@len" parameter to gss_unwrap()") nfsd: avoid a NULL dereference in __cld_pipe_upcall() nfsd4: a client's own opens needn't prevent delegations nfsd: Use seq_putc() in two functions svcrdma: Display chunk completion ID when posting a rw_ctxt svcrdma: Record send_ctxt completion ID in trace_svcrdma_post_send() svcrdma: Introduce Send completion IDs svcrdma: Record Receive completion ID in svc_rdma_decode_rqst svcrdma: Introduce Receive completion IDs svcrdma: Introduce infrastructure to support completion IDs svcrdma: Add common XDR encoders for RDMA and Read segments svcrdma: Add common XDR decoders for RDMA and Read segments SUNRPC: Add helpers for decoding list discriminators symbolically svcrdma: Remove declarations for functions long removed svcrdma: Clean up trace_svcrdma_send_failed() tracepoint ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull regset conversion fix from Al Viro: "Fix a regression from an unnoticed bisect hazard in the regset series. A bunch of old (aout, originally) primitives used by coredumps became dead code after fdpic conversion to regsets. Removal of that dead code had been the first commit in the followups to regset series; unfortunately, it happened to hide the bisect hazard on sh (extern for fpregs_get() had not been updated in the main series when it should have been; followup simply made fpregs_get() static). And without that followup commit this bisect hazard became breakage in the mainline" Tested-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill unused dump_fpu() instances
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control updates from Linus Walleij: "This is the bulk of the pin control changes for the v5.9 kernel series: Core changes: - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range() macro" was put in an immutable branch and merged into the pinctrl tree as well. We see these changes also here. - Improved debug output for pins used as GPIO. New drivers: - Ocelot Sparx5 SoC driver. - Intel Emmitsburg SoC subdriver. - Intel Tiger Lake-H SoC subdriver. - Qualcomm PM660 SoC subdriver. - Renesas SH-PFC R8A774E1 subdriver. Driver improvements: - Linear improvement and cleanups of the Intel drivers for Cherryview, Lynxpoint, Baytrail etc. Improved locking among other things. - Renesas SH-PFC has added support for RPC pins, groups, and functions to r8a77970 and r8a77980. - The newere Freescale (now NXP) i.MX8 pin controllers have been modularized. This is driven by the Google Android GKI initiative I think. - Open drain support for pins on the Qualcomm IPQ4019. - The Ingenic driver can handle both edges IRQ detection. - A big slew of documentation fixes all over the place. - A few irqchip template conversions by yours truly. * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC pinctrl: stmfx: Use irqchip template pinctrl: amd: Use irqchip template pinctrl: mediatek: fix build for tristate changes pinctrl: samsung: Use bank name as irqchip name pinctrl: core: print gpio in pins debugfs file pinctrl: mediatek: add mt6779 eint support pinctrl: mediatek: add pinctrl support for MT6779 SoC pinctrl: mediatek: avoid virtual gpio trying to set reg pinctrl: mediatek: update pinmux definitions for mt6779 pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API pinctrl: mcp23s08: Use irqchip template pinctrl: sx150x: Use irqchip template dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes pinctrl: intel: Add Intel Emmitsburg pin controller support pinctl: ti: iodelay: Replace HTTP links with HTTPS ones Revert "gpio: omap: handle pin config bias flags" pinctrl: single: Use fallthrough pseudo-keyword pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword pinctrl: baytrail: Use fallthrough pseudo-keyword ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull mtd updates from Miquel Raynal: "MTD core changes: - Spelling - http to https updates NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4, TC58NVG0S3E, and TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC SPI NOR core changes: - Disable Quad Mode in spi_nor_restore(). - Don't abort BFPT parsing when QER reserved value is used. - Add support/update capabilities for few flashes. - Drop s70fl01gs flash: it does not support RDSR(05h) which is critical for erase/write. - Merge the SPIMEM DTR bits in spi-nor/next to avoid conflicts during the release cycle. SPI NOR controller drivers changes: - Move the cadence-quadspi driver to spi-mem. The series was taken through the SPI tree. Merge it also in spi-nor/next to avoid conflicts during the release cycle. - intel-spi: - Add new PCI IDs. - Ignore the Write Disable command, the controller doesn't support it. - Fix performance regression" * tag 'mtd/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (79 commits) MTD: pfow.h: drop a duplicated word MTD: mtd-abi.h: drop a duplicated word mtd: rawnand: omap_elm: Replace HTTP links with HTTPS ones mtd: Replace HTTP links with HTTPS ones mtd: hyperbus: Replace HTTP links with HTTPS ones mtd: revert "spi-nor: intel: provide a range for poll_timout" mtd: spi-nor: update read capabilities for w25q64 and s25fl064k mtd: spi-nor: micron: Add SPI_NOR_DUAL_READ flag on mt25qu02g mtd: spi-nor: macronix: Add support for mx66u2g45g mtd: spi-nor: intel-spi: Simulate WRDI command mtd: spi-nor: Disable the flash quad mode in spi_nor_restore() mtd: spi-nor: Add capability to disable flash quad mode mtd: spi-nor: spansion: Remove s70fl01gs from flash_info mtd: spi-nor: sfdp: do not make invalid quad enable fatal dt-bindings: mtd: fsl-upm-nand: Deprecate chip-delay and fsl, upm-wait-flags mtd: rawnand: stm32_fmc2: get resources from parent node mtd: rawnand: stm32_fmc2: use regmap APIs memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver dt-bindings: memory-controller: add STM32 FMC2 EBI controller documentation dt-bindings: mtd: update STM32 FMC2 NAND controller documentation ...
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Masahiro Yamada authored
Commit d26e9414 ("kbuild: no gcc-plugins during cc-option tests") was neeeded because scripts/Makefile.gcc-plugins was too early. This is unneeded by including scripts/Makefile.gcc-plugins last, and being careful to not add cc-option tests after it. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
Currently, the top Makefile includes all of scripts/Makefile.<feature> even if the associated CONFIG option is disabled. Do not include unneeded Makefiles in order to slightly optimize the parse stage. Include $(include-y), and ignore $(include-). Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
To build host programs, you need to add the program names to 'hostprogs' to use the necessary build rule, but it is not enough to build them because there is no dependency. There are two types of host programs: built as the prerequisite of another (e.g. gen_crc32table in lib/Makefile), or always built when Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile). The latter is typical in Makefiles under scripts/, which contains host programs globally used during the kernel build. To build them, you need to add them to both 'hostprogs' and 'always-y'. This commit adds hostprogs-always-y as a shorthand. The same applies to user programs. net/bpfilter/Makefile builds bpfilter_umh on demand, hence always-y is unneeded. In contrast, programs under samples/ are added to both 'userprogs' and 'always-y' so they are always built when Kbuild visits the Makefiles. userprogs-always-y works as a shorthand. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
-
Masahiro Yamada authored
The conditional: ifneq ($(hostprogs),) ... is evaluated to true if $(hostprogs) does not contain any word but whitespace characters. ifneq ($(strip $(hostprogs)),) ... is a safe way to avoid interpreting whitespace as a non-empty value, but I'd rather want to use the side-effect of $(sort ...) to do the equivalent. $(sort ...) is used in scripts/Makefile.host in order to drop duplication in $(hostprogs). It is also useful to strip excessive spaces. Move $(sort ...) before evaluating the ifneq. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
The host shared library rules are currently implemented in scripts/Makefile.host, but actually GCC-plugin is the only user of them. (The VDSO .so files are built for the target by different build rules) Hence, they do not need to be treewide available. Move all the relevant build rules to scripts/gcc-plugins/Makefile. I also optimized the build steps so *.so is directly built from .c because every upstream plugin is compiled from a single source file. I am still keeping the multi-file plugin support, which Kees Cook mentioned might be needed by out-of-tree plugins. (https://lkml.org/lkml/2019/1/11/1107) If the plugin, foo.so, is compiled from two files foo.c and foo2.c, then you can do like follows: foo-objs := foo.o foo2.o Single-file plugins do not need the *-objs notation. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Kees Cook <keescook@chromium.org>
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:
Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE) exists here in sub-directories of lib/ to keep the behavior of commit 2464a609 ("ftrace: do not trace library functions"). Since that commit, not only the objects in lib/ but also the ones in the sub-directories are excluded from ftrace (although the commit description did not explicitly mention this). However, most of library functions in sub-directories are not so hot. Re-add them to ftrace. Going forward, only the objects right under lib/ will be excluded. Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Masahiro Yamada authored
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular object, but there is no convenient way to do that for every object in a directory. Add ccflags-remove-y and asflags-remove-y to make it easily. Use ccflags-remove-y to clean up some Makefiles. The add/remove order works as follows: [1] KBUILD_CFLAGS specifies compiler flags used globally [2] ccflags-y adds compiler flags for all objects in the current Makefile [3] ccflags-remove-y removes compiler flags for all objects in the current Makefile (New feature) [4] CFLAGS_<file> adds compiler flags per file. [5] CFLAGS_REMOVE_<file> removes compiler flags per file. Having [3] before [4] allows us to remove flags from most (but not all) objects in the current Makefile. For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE) from all objects in the directory, then adds it back to trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o The same applies to lib/livepatch/Makefile. Please note ccflags-remove-y has no effect to the sub-directories. In contrast, the previous notation got rid of compiler flags also from all the sub-directories. The following are not affected because they have no sub-directories: arch/arm/boot/compressed/ arch/powerpc/xmon/ arch/sh/ kernel/trace/ However, lib/ has several sub-directories. To keep the behavior, I added ccflags-remove-y to all Makefiles in subdirectories of lib/, except the following: lib/vdso/Makefile - Kbuild does not descend into this Makefile lib/raid/test/Makefile - This is not used for the kernel build I think commit 2464a609 ("ftrace: do not trace library functions") excluded too much. In the next commit, I will remove ccflags-remove-y from the sub-directories of lib/. Suggested-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit) Tested-by:
Anders Roxell <anders.roxell@linaro.org>
-
Masahiro Yamada authored
When you clean the build tree for ARCH=arm, you may see the following error message from 'nm' command: $ make -j24 ARCH=arm clean CLEAN arch/arm/crypto CLEAN arch/arm/kernel CLEAN arch/arm/mach-at91 CLEAN arch/arm/mach-omap2 CLEAN arch/arm/vdso CLEAN certs CLEAN lib CLEAN usr CLEAN net/wireless CLEAN drivers/firmware/efi/libstub nm: 'arch/arm/boot/compressed/../../../../vmlinux': No such file /bin/sh: 1: arithmetic expression: expecting primary: " " CLEAN arch/arm/boot/compressed CLEAN drivers/scsi CLEAN drivers/tty/vt CLEAN arch/arm/boot CLEAN vmlinux.symvers modules.builtin modules.builtin.modinfo Even if you rerun the same command, the error message will not be shown despite vmlinux is already gone. To reproduce it, the parallel option -j is needed. Single thread cleaning always executes 'archclean', 'vmlinuxclean' in this order, so vmlinux still exists when arch/arm/boot/compressed/ is cleaned. Looking at arch/arm/boot/compressed/Makefile does not help understand the reason of the error message. Both KBSS_SZ and LDFLAGS_vmlinux are assigned with '=' operator, hence, they are not expanded unless used. Obviously, 'make clean' does not use them. In fact, the root cause exists in the top Makefile: export LDFLAGS_vmlinux Since LDFLAGS_vmlinux is an exported variable, LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is expanded when scripts/Makefile.clean has a command to execute. This is why the error message shows up only when there exist build artifacts in arch/arm/boot/compressed/. Adding 'unexport LDFLAGS_vmlinux' to arch/arm/boot/compressed/Makefile will fix it as far as ARCH=arm is concerned, but I think the proper fix is to get rid of 'export LDFLAGS_vmlinux' from the top Makefile. LDFLAGS_vmlinux in the top Makefile contains linker flags for the top vmlinux. LDFLAGS_vmlinux in arch/arm/boot/compressed/Makefile is for arch/arm/boot/compressed/vmlinux. They just happen to have the same variable name, but are used for different purposes. Stop shadowing LDFLAGS_vmlinux. This commit passes LDFLAGS_vmlinux to scripts/link-vmlinux.sh via a command line parameter instead of via an environment variable. LD and KBUILD_LDFLAGS are exported, but I did the same for consistency. Anyway, they must be included in cmd_link-vmlinux to allow if_changed to detect the changes in LD or KBUILD_LDFLAGS. The following Makefiles are not affected: arch/arm/boot/compressed/Makefile arch/h8300/boot/compressed/Makefile arch/nios2/boot/compressed/Makefile arch/parisc/boot/compressed/Makefile arch/s390/boot/compressed/Makefile arch/sh/boot/compressed/Makefile arch/sh/boot/romimage/Makefile arch/x86/boot/compressed/Makefile They use ':=' or '=' to clear the LDFLAGS_vmlinux inherited from the top Makefile. We need to take a closer look at the impact to unicore32 and xtensa. arch/unicore32/boot/compressed/Makefile only uses '+=' operator for LDFLAGS_vmlinux. So, the decompressor previously inherited the linker flags from the top Makefile. However, commit 70fac51f ("unicore32 additional architecture files: boot process") was merged before commit 1f2bfbd0 ("kbuild: link of vmlinux moved to a script"). So, I rather consider this is a bug fix of 1f2bfbd0. arch/xtensa/boot/boot-elf/Makefile is also affected, but this is also considered a fix for the same reason. It did not inherit LDFLAGS_vmlinux when commit 4bedea94 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 2") was merged. I deleted $(LDFLAGS_vmlinux), which is now empty. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com>
-
Masahiro Yamada authored
Currently, the directories of objects are automatically created only for O= builds. It should not hurt to cater to this for in-tree builds too. Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
- 08 Aug, 2020 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Fix tegra194-cpufreq module build failure caused by __cpu_logical_map not being exported. - Improve fixed_addresses comment regarding the fixmap buffer sizes. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix __cpu_logical_map undefined issue arm64/fixmap: make notes of fixed_addresses more precisely
-
Kefeng Wang authored
The __cpu_logical_map undefined issue occued when the new tegra194-cpufreq drvier building as a module. ERROR: modpost: "__cpu_logical_map" [drivers/cpufreq/tegra194-cpufreq.ko] undefined! The driver using cpu_logical_map() macro which will expand to __cpu_logical_map, we can't access it in a drvier. Let's turn cpu_logical_map() into a C wrapper and export it to fix the build issue. Also create a function set_cpu_logical_map(cpu, hwid) when assign a value to cpu_logical_map(cpu). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Pingfan Liu authored
These 'compile-time allocated' memory buffers can occupy more than one page and each enum increment is page-sized. So improve the note about it. Signed-off-by:
Pingfan Liu <kernelfans@gmail.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/1596460720-19243-1-git-send-email-kernelfans@gmail.com To: linux-arm-kernel@lists.infradead.org Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com>
-
git://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "Minor cleanups to the IPMI driver for 5.9 Nothing of any major consequence. Duplicate code, some missing \n's in sysfs files, some documentation and comment changes" * tag 'for-linus-5.9-1' of git://github.com/cminyard/linux-ipmi: ipmi/watchdog: add missing newlines when printing parameters by sysfs ipmi: remve duplicate code in __ipmi_bmc_register() ipmi: ssif: Remove finished TODO comment about SMBus alert Doc: driver-api: ipmi: Add description of alerts_broken module param
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add COOL/WARM/HOT state from JEITA JISC8712:2015 specification - convert simple-battery DT binding to YAML - add long-life charging mode Battery/charger drivers: - bq25150: new charger driver - bq27xxx: add support for BQ27z561 and BQ28z610 - max17040: support CAPACITY_ALERT_MIN - sbs-battery: add PEC support - wilco-ec: support long-life charging mode - bq25890: fix DT binding - misc. fixes and cleanups Reset drivers: - linkstation: new reset driver" * tag 'for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: supply: wilco_ec: Add long life charging mode power: supply: bq27xxx_battery: Add the BQ28z610 Battery monitor dt-bindings: power: Add BQ28z610 compatible power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor dt-bindings: power: Add BQ27Z561 compatible power: supply: test_power: Fix battery_current initial value power: supply: Fix kerneldoc of power_supply_temp2resist_simple() power: supply: cpcap-battery: Fix kerneldoc of cpcap_battery_read_accumulated() dt-bindings: power: Convert battery.txt to battery.yaml power: supply: rt5033_battery: Fix error code in rt5033_battery_probe() power: supply: max17040: Add POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN power: supply: check if calc_soc succeeded in pm860x_init_battery power: supply: bq2xxxx: Replace HTTP links with HTTPS ones power: reset: add driver for LinkStation power off power: supply: sc27xx: prevent adc * 1000 from overflow math64: New DIV_S64_ROUND_CLOSEST helper power: fix duplicated words in bq2415x_charger.h power: Convert to DEFINE_SHOW_ATTRIBUTE power: reset: keystone-reset: Replace HTTP links with HTTPS ones power: supply: bq25150 introduce the bq25150 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc vfs updates from Al Viro: "No common topic whatsoever in those, sorry" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: define inode flags using bit numbers iov_iter: Move unnecessary inclusion of crypto/hash.h dlmfs: clean up dlmfs_file_{read,write}() a bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull mount leak fix from Al Viro: "Regression fix for the syscalls-for-init series - fix a leak of a 'struct path'" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: fix a struct path leak in path_umount
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
-