- 23 Jun, 2015 3 commits
-
-
Alexei Starovoitov authored
[ Upstream commit 3f7352bf ] x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f ("net: filter: Just In Time compiler for x86-64") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vlad Yasevich authored
[ Upstream commit d66bf7dd ] The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit 45002267 upstream. Crush temporary buffers are allocated as per replica size configured by the user. When there are more final osds (to be selected as per rule) than the replicas, buffer overlaps and it causes crash. Now, it ensures that at most num-rep osds are selected even if more number of osds are allowed by the rule. Reflects ceph.git commits 6b4d1aa99718e3b367496326c1e64551330fabc0, 234b066ba04976783d15ff2abc3e81b6cc06fb10. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
- 06 Jun, 2015 37 commits
-
-
Greg Kroah-Hartman authored
-
Andrew Morton authored
commit 2b1d3ae9 upstream. load_elf_binary() returns `retval', not `error'. Fixes: a87938b2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries") Reported-by:
James Hogan <james.hogan@imgtec.com> Cc: Michael Davidson <md@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sasha Levin authored
commit 161f873b upstream. We used to read file_handle twice. Once to get the amount of extra bytes, and once to fetch the entire structure. This may be problematic since we do size verifications only after the first read, so if the number of extra bytes changes in userspace between the first and second calls, we'll have an incoherent view of file_handle. Instead, read the constant size once, and copy that over to the final structure without having to re-read it again. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Christian König authored
commit 7c0411d2 upstream. We have that bug for years and some users report side effects when fixing it on older hardware. So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Christian König authored
commit 607d4806 upstream. The mapping range is inclusive between starting and ending addresses. Signed-off-by:
-
Alex Deucher authored
commit fcf3b542 upstream. Signed-off-by:
-
Rafael J. Wysocki authored
commit b9a5e5e1 upstream. Since acpi_reserve_resources() is defined as a device_initcall(), there's no guarantee that it will be executed in the right order with respect to the rest of the ACPI initialization code. On some systems this leads to breakage if, for example, the address range that should be reserved for the ACPI fixed registers is given to the PCI host bridge instead if the race is won by the wrong code path. Fix this by turning acpi_reserve_resources() into a void function and calling it directly from within the ACPI initialization sequence. Reported-and-tested-by:
George McCollister <george.mccollister@gmail.com> Link: http://marc.info/?t=143092384600002&r=1&w=2Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mark Hounschell authored
commit 74856fbf upstream. 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by:
Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit dc45708c upstream. Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Benjamin Tissoires authored
commit 3c0213d1 upstream. When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Larry Finger authored
commit 414b7e3b upstream. The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by:
Bernhard Wiedemann <bwiedemann@suse.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Eric Work authored
commit a8115776 upstream. The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979 restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by:
NeilBrown <neilb@suse.de> Fixes: 47d68979 ("md/raid0: fix bug with chunksize not a power of 2.") URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501Signed-off-by:
-
NeilBrown authored
commit 6e9eac2d upstream. If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3 ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Signed-off-by:
-
Jean Delvare authored
Commit 178c2490 ("thermal: step_wise: cdev only needs update on a new target state") broke driver acerhdf. That driver abused the step_wise thermal governor until the bang_bang governor was available, and the optimization broke this usage model. Kernels v3.12 to v3.18 are affected. In v3.19 the acerhdf driver was switched to the bang_bang governor and that solved the problem. For kernels v3.12 to v3.17, the bang_bang governor isn't available yet so the easiest fix is to revert the optimization. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reported-by: Dieter Jurzitza (https://bugzilla.opensuse.org/show_bug.cgi?id=925961) Tested-by:
Peter Feuerer <peter@piie.net> Tested-by: Dieter Jurzitza
-
Scott Mayhew authored
commit 9507271d upstream. In an environment where the KDC is running Active Directory, the exported composite name field returned in the context could be large enough to span a page boundary. Attaching a scratch buffer to the decoding xdr_stream helps deal with those cases. The case where we saw this was actually due to behavior that's been fixed in newer gss-proxy versions, but we're fixing it here too. Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Reviewed-by:
Simo Sorce <simo@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Mel Gorman authored
commit b0dc2b9b upstream. NUMA balancing is meant to be disabled by default on UMA machines but the check is using nr_node_ids (highest node) instead of num_online_nodes (online nodes). The consequences are that a UMA machine with a node ID of 1 or higher will enable NUMA balancing. This will incur useless overhead due to minor faults with the impact depending on the workload. These are the impact on the stats when running a kernel build on a single node machine whose node ID happened to be 1: vanilla patched NUMA base PTE updates 5113158 0 NUMA huge PMD updates 643 0 NUMA page range updates 5442374 0 NUMA hint faults 2109622 0 NUMA hint local faults 2109622 0 NUMA hint local percent 100 100 NUMA pages migrated 0 0 Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Andi Kleen authored
commit 4933f55f upstream. libabikfs.a doesn't exist anymore, so we now need to link with libapi.a. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Russell King authored
commit 1b979372 upstream. Josh Stone reports: I've discovered a case where both arm and arm64 will miss a ptrace syscall-exit that they should report. If the syscall is entered without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's then possible to have TIF_SYSCALL_TRACE added in the middle of the syscall, but ret_fast_syscall doesn't check this flag again. Fix this by always checking for a syscall trace in the fast exit path. Reported-by:
Josh Stone <jistone@redhat.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Philippe Reynes authored
commit a29ef819 upstream. According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9f0749e3 ("ARM i.MX27: Add devicetree support") Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Janusz Dziedzic authored
commit 47b4e1fc upstream. Remove checking tailroom when adding IV as it uses only headroom, and move the check to the ICV generation that actually needs the tailroom. In other case I hit such warning and datapath don't work, when testing: - IBSS + WEP - ath9k with hw crypt enabled - IPv6 data (ping6) WARNING: CPU: 3 PID: 13301 at net/mac80211/wep.c:102 ieee80211_wep_add_iv+0x129/0x190 [mac80211]() [...] Call Trace: [<ffffffff817bf491>] dump_stack+0x45/0x57 [<ffffffff8107746a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8107755a>] warn_slowpath_null+0x1a/0x20 [<ffffffffc09ae109>] ieee80211_wep_add_iv+0x129/0x190 [mac80211] [<ffffffffc09ae7ab>] ieee80211_crypto_wep_encrypt+0x6b/0xd0 [mac80211] [<ffffffffc09d3fb1>] invoke_tx_handlers+0xc51/0xf30 [mac80211] [...] Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Harald Freudenberger authored
commit a1cae34e upstream. Multitheaded tests showed that the icv buffer in the current ghash implementation is not handled correctly. A move of this working ghash buffer value to the descriptor context fixed this. Code is tested and verified with an multithreaded application via af_alg interface. Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Gerald Schaefer <geraldsc@linux.vnet.ibm.com> Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Michael Brunner authored
commit f230e8ff upstream. This patch fixes an inverted return value of the gpio get_direction function. The wrong value causes the direction sysfs entry and GPIO debugfs file to indicate incorrect GPIO direction settings. In some cases it also prevents setting GPIO output values. The problem is also present in all other stable kernel versions since linux-3.12. Reported-by:
Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by:
Michael Brunner <michael.brunner@kontron.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Scott Branden authored
commit ea345c14 upstream. Add the USB Id to link the D-Link DWA 130 USB Wifi adapter to the rt2830 driver. Signed-off-by:
Scott Branden <sbranden@broadcom.com> Signed-off-by:
Pieter Truter <ptruter@broadcom.com> Signed-off-by:
-
Gabriele Mazzotta authored
commit 09c5b480 upstream. When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13Signed-off-by:
Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Gabriele Mazzotta authored
commit 8393b811 upstream. This is a preparation commit that will allow to add other criteria according to which PHY events should be dropped. Signed-off-by:
-
Darrick J. Wong authored
commit e531d0bc upstream. The journal revoke block recovery code does not check r_count for sanity, which means that an evil value of r_count could result in the kernel reading off the end of the revoke table and into whatever garbage lies beyond. This could crash the kernel, so fix that. However, in testing this fix, I discovered that the code to write out the revoke tables also was not correctly checking to see if the block was full -- the current offset check is fine so long as the revoke table space size is a multiple of the record size, but this is not true when either journal_csum_v[23] are set. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Eryu Guan authored
commit 2f974865 upstream. The following commit introduced a bug when checking for zero length extent 5946d089 ext4: check for overlapping extents in ext4_valid_extent_entries() Zero length extent could pass the check if lblock is zero. Adding the explicit check for zero length back. Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Lukas Czerner authored
commit 9d506594 upstream. Currently when journal restart fails, we'll have the h_transaction of the handle set to NULL to indicate that the handle has been effectively aborted. We handle this situation quietly in the jbd2_journal_stop() and just free the handle and exit because everything else has been done before we attempted (and failed) to restart the journal. Unfortunately there are a number of problems with that approach introduced with commit 41a5b913 "jbd2: invalidate handle if jbd2_journal_restart() fails" First of all in ext4 jbd2_journal_stop() will be called through __ext4_journal_stop() where we would try to get a hold of the superblock by dereferencing h_transaction which in this case would lead to NULL pointer dereference and crash. In addition we're going to free the handle regardless of the refcount which is bad as well, because others up the call chain will still reference the handle so we might potentially reference already freed memory. Moreover it's expected that we'll get aborted handle as well as detached handle in some of the journalling function as the error propagates up the stack, so it's unnecessary to call WARN_ON every time we get detached handle. And finally we might leak some memory by forgetting to free reserved handle in jbd2_journal_stop() in the case where handle was detached from the transaction (h_transaction is NULL). Fix the NULL pointer dereference in __ext4_journal_stop() by just calling jbd2_journal_stop() quietly as suggested by Jan Kara. Also fix the potential memory leak in jbd2_journal_stop() and use proper handle refcounting before we attempt to free it to avoid use-after-free issues. And finally remove all WARN_ON(!transaction) from the code so that we do not get random traces when something goes wrong because when journal restart fails we will get to some of those functions. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Pan Xinhui authored
commit 8f9cfeed upstream. when gsmtty_remove put dlci, it will cause memory leak if dlci->port's refcount is zero. So we do the cleanup work in .cleanup callback instead. dlci will be last put in two call chains. 1) gsmld_close -> gsm_cleanup_mux -> gsm_dlci_release -> dlci_put 2) gsmld_remove -> dlci_put so there is a race. the memory leak depends on the race. In call chain 2. we hit the memory leak. below comment tells. release_tty -> tty_driver_remove_tty -> gsmtty_remove -> dlci_put -> tty_port_destructor (WARN_ON(port->itty) and return directly) | tty->port->itty = NULL; | tty_kref_put ---> release_one_tty -> gsmtty_cleanup (added by our patch) So our patch fix the memory leak by doing the cleanup work after tty core did. Signed-off-by:
Pan Xinhui <xinhuix.pan@intel.com> Fixes: dfabf7ffAcked-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Ludovic Desroches authored
commit 60c8f783 upstream. clkdiv is declared as an u32 but it can be set to a negative value causing a huge divisor value. Change its type to int to avoid this case. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Anton Blanchard authored
commit 5e95235c upstream. Recent toolchains force the TOC to be 256 byte aligned. We need to enforce this alignment in our linker script, otherwise pointers to our TOC variables (__toc_start, __prom_init_toc_start) could be incorrect. If they are bad, we die a few hundred instructions into boot. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Krzysztof Opasiak authored
commit 903124fe upstream. memset() to 0 interfaces array before reusing usb_configuration structure. This commit fix bug: ln -s functions/acm.1 configs/c.1 ln -s functions/acm.2 configs/c.1 ln -s functions/acm.3 configs/c.1 echo "UDC name" > UDC echo "" > UDC rm configs/c.1/acm.* rmdir functions/* mkdir functions/ecm.usb0 ln -s functions/ecm.usb0 configs/c.1 echo "UDC name" > UDC [ 82.220969] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 82.229009] pgd = c0004000 [ 82.231698] [00000000] *pgd=00000000 [ 82.235260] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [ 82.240638] Modules linked in: [ 82.243681] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-rc2 #39 [ 82.249926] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 82.256003] task: c07cd2f0 ti: c07c8000 task.ti: c07c8000 [ 82.261393] PC is at composite_setup+0xe3c/0x1674 [ 82.266073] LR is at composite_setup+0xf20/0x1674 [ 82.270760] pc : [<c03510d4>] lr : [<c03511b8>] psr: 600001d3 [ 82.270760] sp : c07c9df0 ip : c0806448 fp : ed8c9c9c [ 82.282216] r10: 00000001 r9 : 00000000 r8 : edaae918 [ 82.287425] r7 : ed551cc0 r6 : 00007fff r5 : 00000000 r4 : ed799634 [ 82.293934] r3 : 00000003 r2 : 00010002 r1 : edaae918 r0 : 0000002e [ 82.300446] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 82.307910] Control: 10c5387d Table: 6bc1804a DAC: 00000015 [ 82.313638] Process swapper/0 (pid: 0, stack limit = 0xc07c8210) [ 82.319627] Stack: (0xc07c9df0 to 0xc07ca000) [ 82.323969] 9de0: 00000000 c06e65f4 00000000 c07c9f68 [ 82.332130] 9e00: 00000067 c07c59ac 000003f7 edaae918 ed8c9c98 ed799690 eca2f140 200001d3 [ 82.340289] 9e20: ee79a2d8 c07c9e88 c07c5304 ffff55db 00010002 edaae810 edaae860 eda96d50 [ 82.348448] 9e40: 00000009 ee264510 00000007 c07ca444 edaae860 c0340890 c0827a40 ffff55e0 [ 82.356607] 9e60: c0827a40 eda96e40 ee264510 edaae810 00000000 edaae860 00000007 c07ca444 [ 82.364766] 9e80: edaae860 c0354170 c03407dc c033db4c edaae810 00000000 00000000 00000010 [ 82.372925] 9ea0: 00000032 c0341670 00000000 00000000 00000001 eda96e00 00000000 00000000 [ 82.381084] 9ec0: 00000000 00000032 c0803a23 ee1aa840 00000001 c005d54c 249e2450 00000000 [ 82.389244] 9ee0: 200001d3 ee1aa840 ee1aa8a0 ed84f4c0 00000000 c07c9f68 00000067 c07c59ac [ 82.397403] 9f00: 00000000 c005d688 ee1aa840 ee1aa8a0 c07db4b4 c006009c 00000032 00000000 [ 82.405562] 9f20: 00000001 c005ce20 c07c59ac c005cf34 f002000c c07ca780 c07c9f68 00000057 [ 82.413722] 9f40: f0020000 413fc090 00000001 c00086b4 c000f804 60000053 ffffffff c07c9f9c [ 82.421880] 9f60: c0803a20 c0011fc0 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.430040] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.438199] 9fa0: c000f800 c000f804 60000053 ffffffff 00000000 c0050e70 c0803bc0 c0783bd8 [ 82.446358] 9fc0: ffffffff ffffffff c0783664 00000000 00000000 c07b13e8 00000000 c0803e54 [ 82.454517] 9fe0: c07ca480 c07b13e4 c07ce40c 4000406a 00000000 40008074 00000000 00000000 [ 82.462689] [<c03510d4>] (composite_setup) from [<c0340890>] (s3c_hsotg_complete_setup+0xb4/0x418) [ 82.471626] [<c0340890>] (s3c_hsotg_complete_setup) from [<c0354170>] (usb_gadget_giveback_request+0xc/0x10) [ 82.481429] [<c0354170>] (usb_gadget_giveback_request) from [<c033db4c>] (s3c_hsotg_complete_request+0xcc/0x12c) [ 82.491583] [<c033db4c>] (s3c_hsotg_complete_request) from [<c0341670>] (s3c_hsotg_irq+0x4fc/0x558) [ 82.500614] [<c0341670>] (s3c_hsotg_irq) from [<c005d54c>] (handle_irq_event_percpu+0x50/0x150) [ 82.509291] [<c005d54c>] (handle_irq_event_percpu) from [<c005d688>] (handle_irq_event+0x3c/0x5c) [ 82.518145] [<c005d688>] (handle_irq_event) from [<c006009c>] (handle_fasteoi_irq+0xd4/0x18c) [ 82.526650] [<c006009c>] (handle_fasteoi_irq) from [<c005ce20>] (generic_handle_irq+0x20/0x30) [ 82.535242] [<c005ce20>] (generic_handle_irq) from [<c005cf34>] (__handle_domain_irq+0x6c/0xdc) [ 82.543923] [<c005cf34>] (__handle_domain_irq) from [<c00086b4>] (gic_handle_irq+0x2c/0x6c) [ 82.552256] [<c00086b4>] (gic_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x74) [ 82.559716] Exception stack(0xc07c9f68 to 0xc07c9fb0) [ 82.564753] 9f60: 00000000 00000000 c07c9fb8 c001bee0 c07ca4f0 c057004c [ 82.572913] 9f80: c07ca4fc c0803a20 c0803a20 413fc090 00000001 00000000 01000000 c07c9fb0 [ 82.581069] 9fa0: c000f800 c000f804 60000053 ffffffff [ 82.586113] [<c0011fc0>] (__irq_svc) from [<c000f804>] (arch_cpu_idle+0x30/0x3c) [ 82.593491] [<c000f804>] (arch_cpu_idle) from [<c0050e70>] (cpu_startup_entry+0x128/0x1a4) [ 82.601740] [<c0050e70>] (cpu_startup_entry) from [<c0783bd8>] (start_kernel+0x350/0x3bc) [ 82.609890] Code: 0a000002 e3530005 05975010 15975008 (e5953000) [ 82.615965] ---[ end trace f57d5f599a5f1bfa ]--- Most of kernel code assume that interface array in struct usb_configuration is NULL terminated. When gadget is composed with configfs configuration structure may be reused for different functions set. This bug happens because purge_configs_funcs() sets only next_interface_id to 0. Interface array still contains pointers to already freed interfaces. If in second try we add less interfaces than earlier we may access unallocated memory when trying to get interface descriptors. Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Hans de Goede authored
commit 17211509 upstream. Without this flag some versions of these enclosures do not work. Reported-and-tested-by:
Christian Schaller <cschalle@redhat.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Mark Edwards authored
commit c735ed74 upstream. Added the USB serial console device ID for KCF Technologies PRN device which has a USB port for its serial console. Signed-off-by:
Mark Edwards <sonofaforester@gmail.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Jason A. Donenfeld authored
commit 48ef23a4 upstream. This phone is already supported by the visor driver. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Jason A. Donenfeld authored
commit 82ee3aeb upstream. Samsung has just released a portable USB3 SSD, coming in a very small and nice form factor. It's USB ID is 04e8:8001, which unfortunately is already used by the Palm Visor driver for the Samsung I330 phone cradle. Having pl2303 or visor pick up this device ID results in conflicts with the usb-storage driver, which handles the newly released portable USB3 SSD. To work around this conflict, I've dug up a mailing list post [1] from a long time ago, in which a user posts the full USB descriptor information. The most specific value in this appears to be the interface class, which has value 255 (0xff). Since usb-storage requires an interface class of 0x8, I believe it's correct to disambiguate the two devices by matching on 0xff inside visor. [1] http://permalink.gmane.org/gmane.linux.usb.user/4264Signed-off-by:
-
Joe Lawrence authored
commit 948fa135 upstream. If the xHCI host controller has died (ie, device removed) or suffered other serious fatal error (STS_FATAL), then xhci_irq should handle this condition with IRQ_HANDLED instead of -ESHUTDOWN. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
