- 16 Feb, 2013 21 commits
-
-
Steven J. Hill authored
Simplify the DSP macros for vanilla (non-microMIPS) kernels and toolchains that do not support the DSP ASEs. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4687/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Steven J. Hill authored
Add macros to support the DSP ASE with microMIPS kernels when the toolchain does not have support. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4686/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Steven J. Hill authored
Newer toolchains support the DSP and DSP Rev2 instructions. This patch performs a check for that support and adds compiler and assembler flags for only the files that need use those instructions. Signed-off-by: Steven J. Hill <sjhill@mips.com> Acked-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4752/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Steven J. Hill authored
Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4682/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Steven J. Hill authored
Clean up standard header text and remove unused #define. Signed-off-by: Steven J. Hill <sjhill@mips.com> Patchwork: http://patchwork.linux-mips.org/patch/4703/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
On a multi-chip XLP board, each node can have 4 PCIe links. Update XLP PCI code to initialize PCIe on all the nodes. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4803/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
On multi-chip boards, the first core on slave SoCs may take much more time to wakeup. Add code to wait for the core to come up before proceeding with the rest of the boot up. Update xlp_wakeup_core to also skip the boot node and the boot CPU initialization which is already complete. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4783/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
Doing calibrate delay on a hardware thread will be inaccurate since it depends on the load on other threads in the core. It will also slow down the boot process when done for 128 hardware threads. Switch to a pre-computed loops per jiffy based on the core frequency. The value is computed based on the core frequency and roughly matches the value calculated by calibrate_delay(). Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4791/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
TLB and COP0 hazards are handled in hardware for Netlogic XLR/XLS SoCs. Update hazards.h to pick more optimal set of definitions when compiling for XLR/XLS. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4788/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
Reading PCI extended register at 0x255 on a bridge will hang if there is no device connected on the link. Make PCI read routine skip this register. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4789/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
The XLR/XLS/XLP PIC has a 8 countdown timers which run at the PIC frequencey. One of these can be used as a clocksource to provide timestamps that is common across cores. This can be used in place of the count/compare clocksource which is per-CPU. On XLR/XLS PIC registers are 32-bit, so we just use the lower 32-bits of the PIC counter. On XLP, the whole 64-bit can be used. Provide common macros and functions for PIC timer registers on XLR/XLS and XLP, and use them to register a PIC clocksource. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4786/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
Since we now use r4k cache code for Netlogic XLP, it is better to split L1 icache among the active threads, so that threads won't step on each other while flushing icache. The L1 dcache is already split among the threads in the core. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4787/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
Rename function xlp_enable_pci_bswap() to xlp_config_pci_bswap(), which is a better description for its functionality. When compiled in big-endian mode, xlp_config_pci_bswap() will configure the PCIe links to byteswap. In little-endian mode, no swap configuration is needed for the PCIe controller, and the function is empty. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4802/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
Provide functions ack_c0_eirr(), set_c0_eimr(), clear_c0_eimr() and read_c0_eirr_and_eimr() that do the EIMR and EIRR operations and update the interrupt handling code to use these functions. Also, use the EIMR register functions to mask interrupts in the irq code. The 64-bit interrupt request and mask registers (EIRR and EIMR) are accessed when the interrupts are off, and the common operations are to set or clear a bit in these registers. Using the 64-bit c0 access functions for these operations is not optimal in 32-bit, because it will disable/restore interrupts and split/join the 64-bit value during each register access. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4790/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Jayachandran C authored
Add support for XLS6xx CPUs to the Fast Message Network (FMN) configuration. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Patchwork: http://patchwork.linux-mips.org/patch/4785/Signed-off-by: John Crispin <blogic@openwrt.org>
-
John Crispin authored
This code makes the irqs used by the EIU loadable from the DT. Additionally we add a helper that allows the pinctrl layer to map external irqs to real irq numbers. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4818/
-
John Crispin authored
We need to make sure that the reset gpio is available and also set a sane default state. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4817/
-
John Crispin authored
Explicitly enable the clock gate of the internal GPHYs found on xrx200. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4816/
-
John Crispin authored
The Lantiq DSL SoCs have an internal networking processor. Add code to read the static clock rate. Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4815/
-
John Crispin authored
"nodes" is written with a single "s" Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/4814/
-
John Crispin authored
Make sure 24KEc is properly identified inside /proc/cpuinfo Signed-off-by: John Crispin <blogic@openwrt.org>
-
- 15 Feb, 2013 11 commits
-
-
Hauke Mehrtens authored
An SoC normally do not define path variables for board_rev and board_type and the Broadcom SDK also uses the nvram values without a prefix in such cases. Do the same to fill these sprom attributes from nvram and do not leave them empty, because brcmsmac do not like this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4679/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Hauke Mehrtens authored
The kernel is loaded to 0x80001000 so there is some space left for the exception handlers and the kernel do not have to reserve some extra space for them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4747/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Hauke Mehrtens authored
All the boot loaders I have seen are booting the kernel in raw mode by default. CFE seems to support elf kernel images too, but the default case is raw for the devices I know of. Select this option to make the kernel boot on most of the devices with the default options. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4746/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Hauke Mehrtens authored
Some nvram values on some devices have a newline character at the end of the value, that caused read errors. Trim the string before reading the number. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4745/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Hauke Mehrtens authored
The nvram functions are exported and used by some normal drivers. To prevent name clashes with ofter parts of the kernel code add a bcm47xx_ prefix in front of the function names and the header file name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4744/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Hauke Mehrtens authored
The old code just worked for nvram with a size of 0x8000 bytes. This patch adds support for reading nvram from partitions of 0xF000 and 0x10000 bytes. There is just 32KB space for the nvram, but most devices do not use the full size and this code reads the first 32KB in that case and prints a warning. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4743/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Hauke Mehrtens authored
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4742/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Hauke Mehrtens authored
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4741/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Hauke Mehrtens authored
This makes it possible to handle the case of not being able to read the nvram ram. This could happen when the code searching for the specific flash chip have not run jet. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4740/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Hauke Mehrtens authored
Instead of using our own error codes use some common codes. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4739/Signed-off-by: John Crispin <blogic@openwrt.org>
-
Rafał Miłecki authored
Also check if parallel flash is present at all before accessing it and add support for serial flash on BCMA bus. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4738/Signed-off-by: John Crispin <blogic@openwrt.org>
-
- 08 Feb, 2013 8 commits
-
-
Linus Torvalds authored
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "I was going to hold these off until v3.8 was out, and send them with a stable tag, but as everyone else is pushing much bigger fixes which Linus is accepting, let's save people from the hastle of having to patch v3.8 back into working or use a stable kernel. Looking at the diffstat, this really is high value for its size; this is miniscule compared to how the -rc6 to tip diffstat currently looks. So, four patches in this set: - Punit Agrawal reports that the kernel no longer boots on MPCore due to a new assumption made in the GIC code which isn't true of earlier GIC designs. This is the biggest change in this set. - Punit's boot log also revealed a bunch of WARN_ON() dumps caused by the DT-ification of the GIC support without fixing up non-DT Realview - which now sees a greater number of interrupts than it did before. - A fix for the DMA coherent code from Marek which uses the wrong check for atomic allocations; this can result in spinlock lockups or other nasty effects. - A fix from Will, which will affect all Android based platforms if not applied (which use the 2G:2G VM split) - this causes particularly 'make' to misbehave unless this bug is fixed." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned ARM: DMA mapping: fix bad atomic test ARM: realview: ensure that we have sufficient IRQs available ARM: GIC: fix GIC cpumask initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a bunch of folks. From Emmanuel Grumbach. 2) Work limiting code in brcmsmac wifi driver can clear tx status without processing the event. From Arend van Spriel. 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger. 4) l2tp tunnel delete can race with close, fix from Tom Parkin. 5) pktgen_add_device() failures are not checked at all, fix from Cong Wang. 6) Fix unintentional removal of carrier off from tun_detach(), otherwise we confuse userspace, from Michael S. Tsirkin. 7) Don't leak socket reference counts and ubufs in vhost-net driver, from Jason Wang. 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil Horman. 9) Protect against USB networking devices which spam the host with 0 length frames, from Bjørn Mork. 10) Prevent neighbour overflows in ipv6 for locally destined routes, from Marcelo Ricardo. This is the best short-term fix for this, a longer term fix has been implemented in net-next. 11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops. This mistake is largely because the ipv6 functions don't even have some kind of prefix in their names to suggest they are ipv6 specific. From Tom Parkin. 12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from Yuchung Cheng. 13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from Francois Romieu and your's truly. 14) Fix infinite loops and divides by zero in TCP congestion window handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen. 15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix from Phil Sutter. 16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala. 17) Protect XEN netback driver against hostile frontend putting garbage into the rings, don't leak pages in TX GOP checking, and add proper resource releasing in error path of xen_netbk_get_requests(). From Ian Campbell. 18) SCTP authentication keys should be cleared out and released with kzfree(), from Daniel Borkmann. 19) L2TP is a bit too clever trying to maintain skb->truesize, and ends up corrupting socket memory accounting to the point where packet sending is halted indefinitely. Just remove the adjustments entirely, they aren't really needed. From Eric Dumazet. 20) ATM Iphase driver uses a data type with the same name as the S390 headers, rename to fix the build. From Heiko Carstens. 21) Fix a typo in copying the inner network header offset from one SKB to another, from Pravin B Shelar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) net: sctp: sctp_endpoint_free: zero out secret key data net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree atm/iphase: rename fregt_t -> ffreg_t net: usb: fix regression from FLAG_NOARP code l2tp: dont play with skb->truesize net: sctp: sctp_auth_key_put: use kzfree instead of kfree netback: correct netbk_tx_err to handle wrap around. xen/netback: free already allocated memory on failure in xen_netbk_get_requests xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop. xen/netback: shutdown the ring if it contains garbage. net: qmi_wwan: add more Huawei devices, including E320 net: cdc_ncm: add another Huawei vendor specific device ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit() tcp: fix for zero packets_in_flight was too broad brcmsmac: rework of mac80211 .flush() callback operation ssb: unregister gpios before unloading ssb bcma: unregister gpios before unloading bcma rtlwifi: Fix scheduling while atomic bug net: usbnet: fix tx_dropped statistics tcp: ipv6: Update MIB counters for drops ...
-
David S. Miller authored
Daniel Borkmann says: ==================== Cryptographically used keys should be zeroed out when our session ends resp. memory is freed, thus do not leave them somewhere in the memory. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
On sctp_endpoint_destroy, previously used sensitive keying material should be zeroed out before the memory is returned, as we already do with e.g. auth keys when released. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
In sctp_setsockopt_auth_key, we create a temporary copy of the user passed shared auth key for the endpoint or association and after internal setup, we free it right away. Since it's sensitive data, we should zero out the key before returning the memory back to the allocator. Thus, use kzfree instead of kfree, just as we do in sctp_auth_key_put(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiko Carstens authored
We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the iphase atm device driver, which causes the compile error below. Unfortunately the s390 typedef can't be renamed, since it's a user visible api, nor can I change the include order in s390 code to avoid the conflict. So simply rename the iphase typedef to a new name. Fixes this compile error: In file included from drivers/atm/iphase.c:66:0: drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t' In file included from next/arch/s390/include/asm/ptrace.h:9:0, from next/arch/s390/include/asm/lowcore.h:12, from next/arch/s390/include/asm/thread_info.h:30, from include/linux/thread_info.h:54, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/atm/iphase.c:43: next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Will Deacon authored
We have received multiple reports of mmap failures when running with a 2:2 vm split. These manifest as either -EINVAL with a non page-aligned address (ending 0xaaa) or a SEGV, depending on the application. The issue is commonly observed in children of make, which appears to use bottom-up mmap (assumedly because it changes the stack rlimit). Further investigation reveals that this regression was triggered by 394ef640 ("mm: use vm_unmapped_area() on arm architecture"), whereby TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing get_unmapped_area to choke on misaligned addressed. This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of TASK_SIZE and explicitly aligns the result to 16M, matching the other end of the heap. Acked-by: Nicolas Pitre <nico@linaro.org> Reported-by: Steve Capper <steve.capper@arm.com> Reported-by: Jean-Francois Moine <moinejf@free.fr> Reported-by: Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-