From: "Robert T. Johnson" <rtjohnso@eecs.berkeley.edu>

Since arg is a user pointer, so are uioc_mimd and uiocp, and hence umc is a
user pointer.  Thus reading umc->xferaddr requires dereferencing a user
pointer, which isn't safe.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

> Although, I think, there's still a glitch there (modified if's order).
> I'll send a new version, if the approach is approved in principle.

Ok, attached is version 3:-) It also fixes a definite (although, perhaps,
harmless) bug in scsiiom.c. And removes a redundant assignment in
tmscsim.c.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

 - qlogicfc.c abuses SCSI_TIEMOUT although it's not part of the scsi
   core, give it it's own ISP_TIMEOUT define
 - avoid redefining timeouts #ifdef DEBUG, that's a cause for heisenbugs
   just waiting to happen
 - now SCSI_TIMEOUT is private to scsi_scan.c, move it there
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

On 1 Jun 2004, James Bottomley wrote:
> On Tue, 2004-06-01 at 15:29, Alan Stern wrote:
> > In addition, the settle-time delays would have to be removed from the
> > error handler -- which means adding it to all the low-level drivers.  Is
> > that doable?
>
> Well, for 2.6, I think that a simple flag indicating that the driver
> will implement it's own timeout should suffice rather than altering
> every LLD...
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

From: Douglas Gilbert <dougg@torque.net>

Here are some further refinements to this patch with help
from Pat Mansfield:
     - replace vmalloc() with kmalloc(,GFP_KERNEL)
     - bump max sg devices from 8192 to 32768

Tested to 16k devices (and 8k devices on a box with 512MB
ram), Patch is against lk 2.6.6 (or 2.6.6-bk1).
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

I actually wanted to fix up the check_region usage there but got lost
in the mess.  Let's start by kicking out the 2.2 compat and using scsi
layer constants instead of their own redefinitions first.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

From: "Adam Radford" <aradford@amcc.com>

This small patch fixes the broken schedule_timeout() usage in the 3w-9xxx
driver, and replaces the calls with msleep().
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

From: "Adam Radford" <aradford@amcc.com>

This patch updates the 3w-9xxx driver in 2.6.7-rc2-mm1 to v2.26.02.000 to
cleanup several things pointed out by Chris Hellwig / Jeff Garzik.

Changes in this release:
  - Use descriptive defines for phase numbers.
  - Remove un-needed casts for TW_Command_Full
  - Rework eh_reset(), eh_abort() spinlocks.
  - Remove all mdelays, replace w/ schedule_timeout().
  - Remove MODULE_PARAM cmds_per_lun, add sysfs device attribute 'queue_depth'.
  - Remove twa_slave_configure().
  - Remove twa_info().
  - Remove all bitfields from structures, add bitmask macros.
  - Remove twa_setup_irq() wrapper, call directly.
  - Remove un-needed prototypes.
  - Propogate return value of pci_enable_device(), pci_set_dma_mask(), ioremap().
  - Use pci_request/free_regions().
  - Add missing call to pci_disable_device() on probe failure.
  - Unregister character ioctl interface in twa_remove().
  - Make some excessively lengthy lines < 80 columns.
  - Use pci_module_init() instead of pci_register_driver().
  - Remove bogus TW_IN_INTR check, fix twa_interrupt() spinlock.
  - Rev driver branch to .02 to denote kernel version.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

From: Alan Cox <alan@redhat.com>

I think it might be a good thing if this was fixed to match 2.4
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

__init is only for functions
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Based on "eata_generic.h", this SCSI controller has 9 bytes of IO
space, not 8, so update request_region(), release_region(), and
n_io_port to use 9 instead of 8.

diffstat:=
 drivers/scsi/eata_pio.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

On Wed, 2004-05-19 at 05:38, Herbert Xu wrote:
> This is a resend of my patch that adds basic support for highmem
> on i386 to the advansys driver.  It has been tested in
> http://bugs.debian.org/245238.
>
> The maintainer email address listed in the MAINTAINERS file bounced
> so someone else will need to look at this.

I converted your patch to use the DMA-API.  This will be necessary to
use the EISA advansys boards---Of course, EISA won't work properly until
the entire driver is converted to the driverfs probing API, sigh, but
I'll get around to that eventually.

OK, and I couldn't resist getting rid of the stupid in_isr locking on
the done function.

Converted from original patch by Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

again, the init code could use some bigger rework, but let's stick to
the minimal fix until we have some testers.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

I'd love to rework the init sequence a bit more, but without beeing able
to actually test the driver I'd rather stick to the bulletproof fix.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Original patch from
http://marc.theaimsgroup.com/?l=linux-scsi&m=107428662718579&w=2
reworked to according to James' suggestion to handle NO_SENSE the same
as RECOVERED_ERROR.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

megaraid does sleep_on_timeout on a stack waitq - use msleep instead.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

On Sun, 23 May 2004, Christoph Hellwig wrote:
> The other thing is that most calls to dc390_findDCB could probably be
> replaced with stroing the pDCB in scsi_device->hostdata on slave_alloc,
> but that could aswell be done in an incremental patch.

Done in the attached patch. Tested as usual and a bit harder.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This patch has been floating around for ages, got reminded of it again
when looking at the debian kernel package.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Here is an updated version v2.26.00.009 of the 3ware 9000 SATA-RAID driver.

Changes in this release:
   - Convert driver to pci_driver format.
   - Remove proc interface, add sysfs attributes.
   - Return SCSI_MLQUEUE_HOST_BUSY when card status is busy.

Future versions may include:
   - PAE fix
   - 80 column wrap fixes
   - Remove more prototypes by re-ordering functions.
   - sysfs queue depth adjustment instead of module_param
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

This patch improves some of the handling of PA-RISC tulip cards.

 - Introduce HAS_SWAPPED_SEEPROM and NEEDS_FAKE_MEDIA_TABLE
 - Only trigger this code on GSC machines.  The pure PCI machines don't
   have these cards.
 - Allow the chip_name to be overridden in tulip_init_one().
 - Fix some indentation.
 - Handle the output from tulip_read_eeprom() better.

> From: Ralf Baechle <ralf@linux-mips.org>
> Subject: [PATCH] Stop queue on close in hdlcdrv
> To: Jeff Garzik <garzik@gtf.org>
> Date: Tue, 4 May 2004 13:59:15 +0200
>
> The stop method of a driver should ensure queueing is stopped ...
>
> diff -u -r1.19 hdlcdrv.c
> --- suckage/drivers/net/hamradio/hdlcdrv.c 12 Apr 2004 20:23:32 -0000

the above means the following is needed for my drivers - please apply to 2.6:

i386 gets it implicitly from somewhere but some architectures don't.
Also move <asm/uaccess.h> down so we have asm after linux headers.

s2io_rem_nic() is marked __exit and is being referred to from .data.
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: "Luiz Fernando N. Capitulino" <lcapitulino@prefeitura.sp.gov.br>

drivers/net/ixgb/ixgb_main.c: In function `ixgb_intr':
drivers/net/ixgb/ixgb_main.c:1593: warning: unused variable `hw'
(catch by J. Cherry).

This happens because `hw' is only used when CONFIG_IXGB_NAPI is not set.
As `hw' is used only to have the code readable, we can use it for
!CONFIG_IXGB_NAPI too.
Signed-off-by: Andrew Morton <akpm@osdl.org>

into redhat.com:/spare/repo/net-drivers-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into nuts.davemloft.net:/disk1/BK/sparc-2.6

into kernel.bkbits.net:/home/davem/bluetooth-2.6

Some RTX Telecom based USB dongles offer SCO support, but their
implementation is broken. This patch disables the use of the ISOC
interface for these devices.