Restoring clock gating break SMU opeartion afterwards, avoid
this until this further invistigated with SMU.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Protect from concurrent SMU accesses.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-and-tested-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The earlier patch "Hook up calls to do stereo mux and dig programming..."
doesn't include update for dcn21.

[How]
Align dcn21 gpio settings with updated stereo control interface.
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This optimizes out the pci device id usage in KFD and makes the code
more maintainable.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

These wptrs must be pinned and GPU accessible when this is called
from hqd_load functions. So they should never fault. This resolves
a circular lock dependency issue involving four locks including the
DQM lock and mmap_sem.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With stutter mode enabled, NMI prints frequently.
Disable stutter for the moment because NMI warning storm, and will
enable it back till the issue is addressed
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch updates MP1_BASE in renoir_ip_offset.h
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With the common interface print_clk_levels can get the following dpm clock:

-pp_dpm_dcefclk
-pp_dpm_fclk
-pp_dpm_mclk
-pp_dpm_sclk
-pp_dpm_socclk
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Removed redundant goto statement
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add support for loading XGMI/RAS FW
Signed-off-by: John Clements <john.clements@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

change r type from bool to int, suitable for both bool and int return
value
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fix bellow patch issue:
drm/amd/powerplay: introduce smu table id type to handle the smu table
for each asic
----
"This patch introduces new smu table type, it's to handle the
 different smu table
 defines for each asic with the same smu ip."

before:
use smu->table_count to represent the actual table count in smc firmware
use actual table count to check smu function parameter about smu table
after:
use logic table count "SMU_TABLE_COUNT" to check function parameter
because table id already mapped in smu driver,
and smu function will use logic table id not actual table id to check func parameter.

v2: squash in warning fix
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add sw_fini interface of df_funcs.
This interface will remove sysfs file of df_cntr_avail
function.

The old behavior only create sysfs of df_cntr_avail
in sw_init, but never remove it for lack of sw_fini
interface. With this,driver will report create
sysfs fail when it's loaded for the second time.
Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Jonathan Kim <Jonathan.Kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

UMC RAS feature requires access to UMC & RSMU registers
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_nbio_ras_late_init is used to init nbio specfic
ras debugfs/sysfs node and nbio specific interrupt handler.
It can be shared among nbio generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_mmhub_ras_late_init is used to init mmhub specfic
ras debugfs/sysfs node and mmhub specific interrupt handler.
It can be shared among mmhub generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_sdma_ras_late_init is used to init sdma specfic
ras debugfs/sysfs node and sdma specific interrupt handler.
It can be shared among sdma generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_gfx_ras_late_init is used to init gfx specfic
ras debugfs/sysfs node and gfx specific interrupt handler.
It can be shared among gfx generations
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu_gmc_ras_late_init is used to init gmc specfic
ras debugfs/sysfs node and gmc specific interrupt handler.
It can be shared among gmc generations.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

to prevent access to dangling pointers
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

In case of RAS error allow user configure auto system
reboot through ras_ctrl.
This is also part of the temproray work around for the RAS
hang problem.

v4: Use latest kernel API for disk sync.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Problem:
Under certain conditions, when some IP bocks take a RAS error,
we can get into a situation where a GPU reset is not possible
due to issues in RAS in SMU/PSP.

Temporary fix until proper solution in PSP/SMU is ready:
When uncorrectable error happens the DF will unconditionally
broadcast error event packets to all its clients/slave upon
receiving fatal error event and freeze all its outbound queues,
err_event_athub interrupt  will be triggered.
In such case and we use this interrupt
to issue GPU reset. THe GPU reset code is modified for such case to avoid HW
reset, only stops schedulers, deatches all in progress and not yet scheduled
job's fences, set error code on them and signals.
Also reject any new incoming job submissions from user space.
All this is done to notify the applications of the problem.

v2:
Extract amdgpu_amdkfd_pre/post_reset from amdgpu_device_lock/unlock_adev
Move amdgpu_job_stop_all_jobs_on_sched to amdgpu_job.c
Remove print param from amdgpu_ras_query_error_count

v3:
Update based on prevoius bug fixing patch to properly call amdgpu_amdkfd_pre_reset
for other XGMI hive memebers.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Issue 1:
In  XGMI case amdgpu_device_lock_adev for other devices in hive
was called to late, after access to their repsective schedulers.
So relocate the lock to the begining of accessing the other devs.

Issue 2:
Using amdgpu_device_ip_need_full_reset to switch the device list from
all devices in hive to the single 'master' device who owns this reset
call is wrong because when stopping schedulers we iterate all the devices
in hive but when restarting we will only reactivate the 'master' device.
Also, in case amdgpu_device_pre_asic_reset conlcudes that full reset IS
needed we then have to stop schedulers for all devices in hive and not
only the 'master' but with amdgpu_device_ip_need_full_reset  we
already missed the opprotunity do to so. So just remove this logic and
always stop and start all schedulers for all devices in hive.

Also minor cleanup and print fix.

v4: Minor coding style fix.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Trying to evict things from the current working set doesn't work that
well anymore because of per VM BOs.

Rely on reserving VRAM for page tables to avoid contention.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This hopefully helps reduce the contention for page tables.

v2: adjust maximum reported VRAM size as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Make VM updates depend on the moving fence instead of the exclusive one.

Makes it less likely to actually have a dependency.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

These are needed for smu_reset support.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Need to update in cache feature enablement status after pp_feature
settings. Another fix for the commit below:
drm/amd/powerplay: implment sysfs feature status function in smu

V2: update smu_feature_update_enable_state() and relates
V3: use bitmap_or and bitmap_andnot
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Force clock level is for dpm manual mode only.
Reported-by: Candice Li <candice.li@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gds clearing workaround should only be applied on asics that support gfx ras
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

free ras_if if ras is not supported
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

mmhub callback functions are not initialized for all the ASICs
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This workaround is better handled in user mode in a way that doesn't
require allocating extra memory and breaking userptr BOs.

The TLB bug is a performance bug, not a functional or security bug.
Hence it is safe to remove this kernel part of the workaround to
allow a better workaround using only virtual address alignments in
user mode.

v2: Removed VI_BO_SIZE_ALIGN definition
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For compute VRAM allocations on Arturus use the new RW mtype
for non-coherent local memory, CC mtype for coherent local
memory and PTE_SNOOPED bit for invalidating non-dirty cache
lines on remote XGMI mappings.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The same BO can be mapped with different PTE flags by different GPUs.
Therefore determine the PTE flags separately for each mapping instead
of storing them in the KFD buffer object.

Add a helper function to determine the PTE flags to be extended with
ASIC and memory-type-specific logic in subsequent commits.

v2: Split Arcturus-specific MTYPE changes into separate commit
v3: Fix return type of get_pte_flags to uint64_t
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Arcturus repurposed mtype WC to RW. Modify gmc functions
to support the new mtype
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add RW mtype introduced for arcturus.

v2:
* Don't add probe-invalidation bit from UAPI
* Don't add unused AMDGPU_MTYPE_ definitions
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

call helper function in late init phase to handle ras init
for nbio ip block

v2: init local var r to 0 in case the function return failure
on asics that don't have ras_late_init implementation
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ras_late_init callback function will be used to do common ras
init in late init phase.

v2: call ras_late_fini to do cleanup when fails to enable interrupt

v3: rename sysfs/debugfs node name to pcie_bif_xxx
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The function will be called in late init phase to do mmhub
ras init

v2: check ras_late_init function pointer before invoking the
function
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>