- 03 Feb, 2020 2 commits
-
-
Rafael J. Wysocki authored
In certain system configurations it may not be desirable to use some C-states assumed to be available by intel_idle and the driver needs to be prevented from using them even before the cpuidle sysfs interface becomes accessible to user space. Currently, the only way to achieve that is by setting the 'max_cstate' module parameter to a value lower than the index of the shallowest of the C-states in question, but that may be overly intrusive, because it effectively makes all of the idle states deeper than the 'max_cstate' one go away (and the C-state to avoid may be in the middle of the range normally regarded as available). To allow that limitation to be overcome, introduce a new module parameter called 'states_off' to represent a list of idle states to be disabled by default in the form of a bitmask and update the documentation to cover it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
Rafael J. Wysocki authored
For diagnostics, it is generally useful to be able to make intel_idle take the system's ACPI tables into consideration even if that is not required for the processor model in there, so introduce a new module parameter, 'use_acpi', to make that happen and update the documentation to cover it. While at it, fix the 'no_acpi' module parameter name in the documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 31 Jan, 2020 38 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power manadement updates from Rafael Wysocki: "Prevent cpufreq from creating excessively large stack frames and fix the handling of devices deleted during system-wide resume in the PM core (Rafael Wysocki), revert a problematic commit affecting the cpupower utility and correct its man page (Thomas Renninger, Brahadambal Srinivasan), and improve the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-5.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis tools/power/x86/intel_pstate_tracer: changes for python 3 compatibility Correction to manpage of cpupower cpufreq: Avoid creating excessively large stack frames PM: core: Fix handling of devices deleted during system-wide resume cpupower: Revert library ABI changes from commit ae291709
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Fix some corner cases on filesystems with a block size < page size. - Fix a corner case that could expose incorrect access times over nfs. - Revert an otherwise sensible revoke accounting cleanup that causes assertion failures. The revoke accounting is whacky and needs to be fixed properly before we can add back this cleanup. - Various other minor cleanups. In addition, please expect to see another pull request from Bob Peterson about his gfs2 recovery patch queue shortly. * tag 'gfs2-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: Revert "gfs2: eliminate tr_num_revoke_rm" gfs2: remove unused LBIT macros fs/gfs2: remove unused IS_DINODE and IS_LEAF macros gfs2: Remove GFS2_MIN_LVB_SIZE define gfs2: Fix incorrect variable name gfs2: Avoid access time thrashing in gfs2_inode_lookup gfs2: minor cleanup: remove unneeded variable ret in gfs2_jdata_writepage gfs2: eliminate ssize parameter from gfs2_struct2blk gfs2: Another gfs2_find_jhead fix
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap fix from Darrick Wong: "A single patch fixing an off-by-one error when we're checking to see how far we're gotten into an EOF page" * tag 'iomap-5.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: fs: Fix page_mkwrite off-by-one errors
-
Linus Torvalds authored
Pull updates from Andrew Morton: "Most of -mm and quite a number of other subsystems: hotfixes, scripts, ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov. MM is fairly quiet this time. Holidays, I assume" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits) kcov: ignore fault-inject and stacktrace include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc() execve: warn if process starts with executable stack reiserfs: prevent NULL pointer dereference in reiserfs_insert_item() init/main.c: fix misleading "This architecture does not have kernel memory protection" message init/main.c: fix quoted value handling in unknown_bootoption init/main.c: remove unnecessary repair_env_string in do_initcall_level init/main.c: log arguments and environment passed to init fs/binfmt_elf.c: coredump: allow process with empty address space to coredump fs/binfmt_elf.c: coredump: delete duplicated overflow check fs/binfmt_elf.c: coredump: allocate core ELF header on stack fs/binfmt_elf.c: make BAD_ADDR() unlikely fs/binfmt_elf.c: better codegen around current->mm fs/binfmt_elf.c: don't copy ELF header around fs/binfmt_elf.c: fix ->start_code calculation fs/binfmt_elf.c: smaller code generation around auxv vector fill lib/find_bit.c: uninline helper _find_next_bit() lib/find_bit.c: join _find_next_bit{_le} uapi: rename ext2_swab() to swab() and share globally in swab.h lib/scatterlist.c: adjust indentation in __sg_alloc_table ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull module updates from Jessica Yu: "Summary of modules changes for the 5.6 merge window: - Add "MS" (SHF_MERGE|SHF_STRINGS) section flags to __ksymtab_strings to indicate to the linker that it can perform string deduplication (i.e., duplicate strings are reduced to a single copy in the string table). This means any repeated namespace string would be merged to just one entry in __ksymtab_strings. - Various code cleanups and small fixes (fix small memleak in error path, improve moduleparam docs, silence rcu warnings, improve error logging)" * tag 'modules-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module.h: Annotate mod_kallsyms with __rcu module: avoid setting info->name early in case we can fall back to info->mod->name modsign: print module name along with error message kernel/module: Fix memleak in module_add_modinfo_attrs() export.h: reduce __ksymtab_strings string duplication by using "MS" section flags moduleparam: fix kerneldoc modules: lockdep: Suppress suspicious RCU usage warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC updates from Vineet Gupta: - Wire up clone3 syscall - ARCv2 FPU state save/restore across context switch - AXS10x platform and misc fixes * tag 'arc-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: fpu: preserve userspace fpu state ARC: fpu: declutter code, move bits out into fpu.h ARC: wireup clone3 syscall ARC: [plat-axs10x]: Add missing multicast filter number to GMAC node ARC: update feature support for jump-labels
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V updates from Palmer Dabbelt: "This contains a handful of patches for this merge window: - Support for kasan - 32-bit physical addresses on rv32i-based systems - Support for CONFIG_DEBUG_VIRTUAL - DT entry for the FU540 GPIO controller, which has recently had a device driver merged These boot a buildroot-based system on QEMU's virt board for me" * tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: dts: Add DT support for SiFive FU540 GPIO driver riscv: mm: add support for CONFIG_DEBUG_VIRTUAL riscv: keep 32-bit kernel to 32-bit phys_addr_t kasan: Add riscv to KASAN documentation. riscv: Add KASAN support kasan: No KASAN's memmove check if archs don't have it.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - three fixes and a cleanup for the resctrl code - a HyperV fix - a fix to /proc/kcore contents in live debugging sessions - a fix for the x86 decoder opcode map" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/decoder: Add TEST opcode to Group3-2 x86/resctrl: Clean up unused function parameter in mkdir path x86/resctrl: Fix a deadlock due to inaccurate reference x86/resctrl: Fix use-after-free due to inaccurate refcount of rdtgroup x86/resctrl: Fix use-after-free when deleting resource groups x86/hyper-v: Add "polling" bit to hv_synic_sint x86/crash: Define arch_crash_save_vmcoreinfo() if CONFIG_CRASH_CORE=y
-
Dmitry Vyukov authored
Don't instrument 3 more files that contain debugging facilities and produce large amounts of uninteresting coverage for every syscall. The following snippets are sprinkled all over the place in kcov traces in a debugging kernel. We already try to disable instrumentation of stack unwinding code and of most debug facilities. I guess we did not use fault-inject.c at the time, and stacktrace.c was somehow missed (or something has changed in kernel/configs). This change both speeds up kcov (kernel doesn't need to store these PCs, user-space doesn't need to process them) and frees trace buffer capacity for more useful coverage. should_fail lib/fault-inject.c:149 fail_dump lib/fault-inject.c:45 stack_trace_save kernel/stacktrace.c:124 stack_trace_consume_entry kernel/stacktrace.c:86 stack_trace_consume_entry kernel/stacktrace.c:89 ... a hundred frames skipped ... stack_trace_consume_entry kernel/stacktrace.c:93 stack_trace_consume_entry kernel/stacktrace.c:86 Link: http://lkml.kernel.org/r/20200116111449.217744-1-dvyukov@gmail.comSigned-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Shevchenko authored
Use PHYS_PFN() macro in io_mapping_map_atomic_wc() instead of open coded variant. Link: http://lkml.kernel.org/r/20191209165624.56351-1-andriy.shevchenko@linux.intel.comSigned-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
There were few episodes of silent downgrade to an executable stack over years: 1) linking innocent looking assembly file will silently add executable stack if proper linker options is not given as well: $ cat f.S .intel_syntax noprefix .text .globl f f: ret $ cat main.c void f(void); int main(void) { f(); return 0; } $ gcc main.c f.S $ readelf -l ./a.out GNU_STACK 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 RWE 0x10 ^^^ 2) converting C99 nested function into a closure https://nullprogram.com/blog/2019/11/15/ void intsort2(int *base, size_t nmemb, _Bool invert) { int cmp(const void *a, const void *b) { int r = *(int *)a - *(int *)b; return invert ? -r : r; } qsort(base, nmemb, sizeof(*base), cmp); } will silently require stack trampolines while non-closure version will not. Without doubt this behaviour is documented somewhere, add a warning so that developers and users can at least notice. After so many years of x86_64 having proper executable stack support it should not cause too many problems. Link: http://lkml.kernel.org/r/20191208171918.GC19716@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Will Deacon <will@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yunfeng Ye authored
The variable inode may be NULL in reiserfs_insert_item(), but there is no check before accessing the member of inode. Fix this by adding NULL pointer check before calling reiserfs_debug(). Link: http://lkml.kernel.org/r/79c5135d-ff25-1cc9-4e99-9f572b88cc00@huawei.comSigned-off-by: Yunfeng Ye <yeyunfeng@huawei.com> Cc: zhengbin <zhengbin13@huawei.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christophe Leroy authored
This message leads to thinking that memory protection is not implemented for the said architecture, whereas absence of CONFIG_STRICT_KERNEL_RWX only means that memory protection has not been selected at compile time. Don't print this message when CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is selected by the architecture. Instead, print "Kernel memory protection not selected by kernel config." Link: http://lkml.kernel.org/r/62477e446d9685459d4f27d193af6ff1bd69d55f.1578557581.git.christophe.leroy@c-s.frSigned-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Kees Cook <keescook@chromium.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arvind Sankar authored
Patch series "init/main.c: minor cleanup/bugfix of envvar handling", v2. unknown_bootoption passes unrecognized command line arguments to init as either environment variables or arguments. Some of the logic in the function is broken for quoted command line arguments. When an argument of the form param="value" is processed by parse_args and passed to unknown_bootoption, the command line has param\0"value\0 with val pointing to the beginning of value. The helper function repair_env_string is then used to restore the '=' character that was removed by parse_args, and strip the quotes off fully. This results in param=value\0\0 and val ends up pointing to the 'a' instead of the 'v' in value. This bug was introduced when repair_env_string was refactored into a separate function, and the decrement of val in repair_env_string became dead code. This causes two problems in unknown_bootoption in the two places where the val pointer is used as a substitute for the length of param: 1. An argument of the form param=".value" is misinterpreted as a potential module parameter, with the result that it will not be placed in init's environment. 2. An argument of the form param="value" is checked to see if param is an existing environment variable that should be overwritten, but the comparison is off-by-one and compares 'param=v' instead of 'param=' against the existing environment. So passing, for example, TERM="vt100" on the command line results in init being passed both TERM=linux and TERM=vt100 in its environment. Patch 1 adds logging for the arguments and environment passed to init and is independent of the rest: it can be dropped if this is unnecessarily verbose. Patch 2 removes repair_env_string from initcall parameter parsing in do_initcall_level, as that uses a separate copy of the command line now and the repairing is no longer necessary. Patch 3 fixes the bug in unknown_bootoption by recording the length of param explicitly instead of implying it from val-param. This patch (of 3): Commit a99cd112 ("init: fix bug where environment vars can't be passed via boot args") introduced two minor bugs in unknown_bootoption by factoring out the quoted value handling into a separate function. When value is quoted, repair_env_string will move the value up 1 byte to strip the quotes, so val in unknown_bootoption no longer points to the actual location of the value. The result is that an argument of the form param=".value" is mistakenly treated as a potential module parameter and is not placed in init's environment, and an argument of the form param="value" can result in a duplicate environment variable: eg TERM="vt100" on the command line will result in both TERM=linux and TERM=vt100 being placed into init's environment. Fix this by recording the length of the param before calling repair_env_string instead of relying on val. Link: http://lkml.kernel.org/r/20191212180023.24339-4-nivedita@alum.mit.eduSigned-off-by: Arvind Sankar <nivedita@alum.mit.edu> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arvind Sankar authored
Since commit 08746a65 ("init: fix in-place parameter modification regression"), parse_args in do_initcall_level is called on a copy of saved_command_line. It is unnecessary to call repair_env_string during this parsing, as this copy is not used for anything later. Remove the now unnecessary arguments from repair_env_string as well. Link: http://lkml.kernel.org/r/20191212180023.24339-3-nivedita@alum.mit.eduSigned-off-by: Arvind Sankar <nivedita@alum.mit.edu> Cc: Krzysztof Mazur <krzysiek@podlesie.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arvind Sankar authored
Extend logging in `run_init_process` to also show the arguments and environment that we are passing to init. Link: http://lkml.kernel.org/r/20191212180023.24339-2-nivedita@alum.mit.eduSigned-off-by: Arvind Sankar <nivedita@alum.mit.edu> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
Unmapping whole address space at once with munmap(0, (1ULL<<47) - 4096) or equivalent will create empty coredump. It is silly way to exit, however registers content may still be useful. The right to coredump is fundamental right of a process! Link: http://lkml.kernel.org/r/20191222150137.GA1277@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
array_size() macro will do overflow check anyway. Link: http://lkml.kernel.org/r/20191222144009.GB24341@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
Comment says ELF header is "too large to be on stack". 64 bytes on 64-bit is not large by any means. Link: http://lkml.kernel.org/r/20191222143850.GA24341@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
If some mapping goes past TASK_SIZE it will be rejected by kernel which means no such userspace binaries exist. Mark every such check as unlikely. Link: http://lkml.kernel.org/r/20191215124355.GA21124@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
"current->mm" pointer is stable in general except few cases one of which execve(2). Compiler can't treat is as stable but it _is_ stable most of the time. During ELF loading process ->mm becomes stable right after flush_old_exec(). Help compiler by caching current->mm, otherwise it continues to refetch it. add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-141 (-141) Function old new delta elf_core_dump 5062 5039 -23 load_elf_binary 5426 5308 -118 Note: other cases are left as is because it is either pessimisation or no change in binary size. Link: http://lkml.kernel.org/r/20191215124755.GB21124@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
ELF header is read into bprm->buf[] by generic execve code. Save a memcpy and allocate just one header for the interpreter instead of two headers (64 bytes instead of 128 on 64-bit). Link: http://lkml.kernel.org/r/20191208171242.GA19716@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
Only executable segments should be accounted to ->start_code just like they do to ->end_code (correctly). Link: http://lkml.kernel.org/r/20191208171410.GB19716@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
Filling auxv vector as array with index (auxv[i++] = ...) generates terrible code. "saved_auxv" should be reworked because it is the worst member of mm_struct by size/usefullness ratio but do it later. Meanwhile help gcc a little with *auxv++ idiom. Space savings on x86_64: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-127 (-127) Function old new delta load_elf_binary 5470 5343 -127 Link: http://lkml.kernel.org/r/20191208172301.GD19716@avx2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yury Norov authored
It saves 25% of .text for arm64, and more for BE architectures. Before: $ size lib/find_bit.o text data bss dec hex filename 1012 56 0 1068 42c lib/find_bit.o After: $ size lib/find_bit.o text data bss dec hex filename 776 56 0 832 340 lib/find_bit.o Link: http://lkml.kernel.org/r/20200103202846.21616-3-yury.norov@gmail.comSigned-off-by: Yury Norov <yury.norov@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Allison Randal <allison@lohutok.net> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yury Norov authored
_find_next_bit and _find_next_bit_le are very similar functions. It's possible to join them by adding 1 parameter and a couple of simple checks. It's simplify maintenance and make possible to shrink the size of .text by un-inlining the unified function (in the following patch). Link: http://lkml.kernel.org/r/20200103202846.21616-2-yury.norov@gmail.comSigned-off-by: Yury Norov <yury.norov@gmail.com> Cc: Allison Randal <allison@lohutok.net> Cc: Joe Perches <joe@perches.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yury Norov authored
ext2_swab() is defined locally in lib/find_bit.c However it is not specific to ext2, neither to bitmaps. There are many potential users of it, so rename it to just swab() and move to include/uapi/linux/swab.h ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG, therefore drop unneeded cast. Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.comSigned-off-by: Yury Norov <yury.norov@gmail.com> Cc: Allison Randal <allison@lohutok.net> Cc: Joe Perches <joe@perches.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
Clang warns: ../lib/scatterlist.c:314:5: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] return -ENOMEM; ^ ../lib/scatterlist.c:311:4: note: previous statement is here if (prv) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Link: http://lkml.kernel.org/r/20191218033606.11942-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/830 Fixes: edce6820 ("scatterlist: prevent invalid free when alloc fails") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikhail Zaslonko authored
In order to benefit from s390 zlib hardware compression support, increase the btrfs zlib workspace buffer size from 1 to 4 pages (if s390 zlib hardware support is enabled on the machine). This brings up to 60% better performance in hardware on s390 compared to the PAGE_SIZE buffer and much more compared to the software zlib processing in btrfs. In case of memory pressure, fall back to a single page buffer during workspace allocation. The data compressed with larger input buffers will still conform to zlib standard and thus can be decompressed also on a systems that uses only PAGE_SIZE buffer for btrfs zlib. Link: http://lkml.kernel.org/r/20200108105103.29028-1-zaslonko@linux.ibm.comSigned-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Reviewed-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: David Sterba <dsterba@suse.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikhail Zaslonko authored
Add a new function to zlib.h checking if s390 Deflate-Conversion facility is installed and enabled. Link: http://lkml.kernel.org/r/20200103223334.20669-6-zaslonko@linux.ibm.comSigned-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikhail Zaslonko authored
Add the new kernel command line parameter 'dfltcc=' to configure s390 zlib hardware support. Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.comSigned-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikhail Zaslonko authored
Add decompression functions to zlib_dfltcc library. Update zlib_inflate functions with the hooks for s390 hardware support and adjust workspace structures with extra parameter lists required for hardware inflate decompression. Link: http://lkml.kernel.org/r/20200103223334.20669-4-zaslonko@linux.ibm.comSigned-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikhail Zaslonko authored
Change the conflicting macro name in preparation for zlib_inflate hardware support. Link: http://lkml.kernel.org/r/20200103223334.20669-3-zaslonko@linux.ibm.comSigned-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikhail Zaslonko authored
Patch series "S390 hardware support for kernel zlib", v3. With IBM z15 mainframe the new DFLTCC instruction is available. It implements deflate algorithm in hardware (Nest Acceleration Unit - NXU) with estimated compression and decompression performance orders of magnitude faster than the current zlib. This patchset adds s390 hardware compression support to kernel zlib. The code is based on the userspace zlib implementation: https://github.com/madler/zlib/pull/410 The coding style is also preserved for future maintainability. There is only limited set of userspace zlib functions represented in kernel. Apart from that, all the memory allocation should be performed in advance. Thus, the workarea structures are extended with the parameter lists required for the DEFLATE CONVENTION CALL instruction. Since kernel zlib itself does not support gzip headers, only Adler-32 checksum is processed (also can be produced by DFLTCC facility). Like it was implemented for userspace, kernel zlib will compress in hardware on level 1, and in software on all other levels. Decompression will always happen in hardware (when enabled). Two DFLTCC compression calls produce the same results only when they both are made on machines of the same generation, and when the respective buffers have the same offset relative to the start of the page. Therefore care should be taken when using hardware compression when reproducible results are desired. However it does always produce the standard conform output which can be inflated anyway. The new kernel command line parameter 'dfltcc' is introduced to configure s390 zlib hardware support: Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) The main purpose of the integration of the NXU support into the kernel zlib is the use of hardware deflate in btrfs filesystem with on-the-fly compression enabled. Apart from that, hardware support can also be used during boot for decompressing the kernel or the ramdisk image With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch 6) the following performance results have been achieved using the ramdisk with btrfs. These are relative numbers based on throughput rate and compression ratio for zlib level 1: Input data Deflate rate Inflate rate Compression ratio NXU/Software NXU/Software NXU/Software stream of zeroes 1.46 1.02 1.00 random ASCII data 10.44 3.00 0.96 ASCII text (dickens) 6,21 3.33 0.94 binary data (vmlinux) 8,37 3.90 1.02 This means that s390 hardware deflate can provide up to 10 times faster compression (on level 1) and up to 4 times faster decompression (refers to all compression levels) for btrfs zlib. Disclaimer: Performance results are based on IBM internal tests using DD command-line utility on btrfs on a Fedora 30 based internal driver in native LPAR on a z15 system. Results may vary based on individual workload, configuration and software levels. This patch (of 9): Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL implementation and related compression functions. Update zlib_deflate functions with the hooks for s390 hardware support and adjust workspace structures with extra parameter lists required for hardware deflate. Link: http://lkml.kernel.org/r/20200103223334.20669-2-zaslonko@linux.ibm.comSigned-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
This switches the qcom-vadc-common to use milli_kelvin_to_millicelsius() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-13-git-send-email-akinobu.mita@gmail.comSigned-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jean Delvare <jdelvare@suse.com> Cc: Jens Axboe <axboe@fb.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Keith Busch <kbusch@kernel.org> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
This removes unused TO_MCELSIUS() macro. Link: http://lkml.kernel.org/r/1576386975-7941-12-git-send-email-akinobu.mita@gmail.comSigned-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Darren Hart <dvhart@infradead.org> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Jean Delvare <jdelvare@suse.com> Cc: Jens Axboe <axboe@fb.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Keith Busch <kbusch@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
This switches the iwlwifi driver to use celsius_to_kelvin() and kelvin_to_celsius() in <linux/units.h>. Link: http://lkml.kernel.org/r/1576386975-7941-11-git-send-email-akinobu.mita@gmail.comSigned-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Luca Coelho <luciano.coelho@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Darren Hart <dvhart@infradead.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Jean Delvare <jdelvare@suse.com> Cc: Jens Axboe <axboe@fb.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-