- 20 Dec, 2013 40 commits
-
-
Benjamin Tissoires authored
commit 4a2c94c9 upstream. Genius Manticore Keyboard presents the same problem in its report descriptors than Genius Gila Gaming Mouse and Genius Imperator Keyboard. Use the same fixup. Reported-and-tested-by:
Adam Kulagowski <fidor@fidor.org> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
J. Bruce Fields authored
commit 950ee956 upstream. Symptoms were spurious -ENOENTs on stat of an NFS filesystem from a 32-bit NFS server exporting a very large XFS filesystem, when the server's cache is cold (so the inodes in question are not in cache). Reviewed-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Trevor Cordes <trevor@tecnopolis.ca> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
J. Bruce Fields authored
commit b7a6ec52 upstream. The filehandle lookup code wants this version of getattr. Reviewed-by:
-
Joe Thornber authored
commit 9b7aaa64 upstream. A thin-pool may be in read-only mode because the pool's data or metadata space was exhausted. To allow for recovery, by adding more space to the pool, we must allow a pool to transition from PM_READ_ONLY to PM_WRITE mode. Otherwise, running out of space will render the pool permanently read-only. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 5383ef3a upstream. If the thin-pool transitioned to fail mode and the thin-pool's table were reloaded for some reason: the new table's default pool mode would be read-write, though it will transition to fail mode during resume. When the pool mode transitions directly from PM_WRITE to PM_FAIL we need to re-establish the intermediate read-only state in both the metadata and persistent-data block manager (as is usually done with the normal pool mode transition sequence: PM_WRITE -> PM_READ_ONLY -> PM_FAIL). Signed-off-by:
-
Joe Thornber authored
commit 020cc3b5 upstream. Rename commit_or_fallback() to commit(). Now all previous calls to commit() will trigger the pool mode to fallback if the commit fails. Also, check the error returned from commit() in alloc_data_block(). Signed-off-by:
-
Mike Snitzer authored
commit 4a02b34e upstream. Switch the thin pool to read-only mode in alloc_data_block() if dm_pool_alloc_data_block() fails because the pool's metadata space is exhausted. Differentiate between data and metadata space in messages about no free space available. This issue was noticed with the device-mapper-test-suite using: dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/ The quantity of errors logged in this case must be reduced. before patch: device-mapper: thin: 253:4: reached low water mark for metadata device: sending event. device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed <snip ... these repeat for a _very_ long while ... > device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: 253:4: commit failed: error = -28 device-mapper: thin: 253:4: switching pool to read-only mode after patch: device-mapper: thin: 253:4: reached low water mark for metadata device: sending event. device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: 253:4: no free metadata space available. device-mapper: thin: 253:4: switching pool to read-only mode Signed-off-by:
-
Joe Thornber authored
commit fafc7a81 upstream. Switch the thin pool to read-only mode when dm_thin_insert_block() fails since there is little reason to expect the cause of the failure to be resolved without further action by user space. This issue was noticed with the device-mapper-test-suite using: dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/ The quantity of errors logged in this case must be reduced. before patch: device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: dm_thin_insert_block() failed device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map metadata: unable to allocate new metadata block <snip ... these repeat for a long while ... > device-mapper: space map metadata: unable to allocate new metadata block device-mapper: space map common: dm_tm_shadow_block() failed device-mapper: thin: 253:4: no free metadata space available. device-mapper: thin: 253:4: switching pool to read-only mode after patch: device-mapper: space map metadata: unable to allocate new metadata block device-mapper: thin: 253:4: dm_thin_insert_block() failed: error = -28 device-mapper: thin: 253:4: switching pool to read-only mode Signed-off-by:
-
Mikulas Patocka authored
commit 5b2d0657 upstream. The dm_round_up function may overflow to zero. In this case, dm_table_create() must fail rather than go on to allocate an empty array with alloc_targets(). This fixes a possible memory corruption that could be caused by passing too large a number in "param->target_count". Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 5b564d80 upstream. The old behaviour, returning -EINVAL if a ref_count of 0 would be decremented, was removed in commit f722063e ("dm space map: optimise sm_ll_dec and sm_ll_inc"). To fix this regression we return an error code from the mutator function pointer passed to sm_ll_mutate() and have dec_ref_count() return -EINVAL if the old ref_count is 0. Add a DMERR to reflect the potential seriousness of this error. Also, add missing dm_tm_unlock() to sm_ll_mutate()'s error path. With this fix the following dmts regression test now passes: dmtest run --suite cache -n /metadata_use_kernel/ The next patch fixes the higher-level dm-array code that exposed this regression. Signed-off-by:
-
Mike Snitzer authored
commit f62b6b8f upstream. Commit 2fc48021 ("dm persistent metadata: add space map threshold callback") introduced a regression to the metadata block allocation path that resulted in errors being ignored. This regression was uncovered by running the following device-mapper-test-suite test: dmtest run --suite thin-provisioning -n /exhausting_metadata_space_causes_fail_mode/ The ignored error codes in sm_metadata_new_block() could crash the kernel through use of either the dm-thin or dm-cache targets, e.g.: device-mapper: thin: 253:4: reached low water mark for metadata device: sending event. device-mapper: space map metadata: unable to allocate new metadata block general protection fault: 0000 [#1] SMP ... Workqueue: dm-thin do_worker [dm_thin_pool] task: ffff880035ce2ab0 ti: ffff88021a054000 task.ti: ffff88021a054000 RIP: 0010:[<ffffffffa0331385>] [<ffffffffa0331385>] metadata_ll_load_ie+0x15/0x30 [dm_persistent_data] RSP: 0018:ffff88021a055a68 EFLAGS: 00010202 RAX: 003fc8243d212ba0 RBX: ffff88021a780070 RCX: ffff88021a055a78 RDX: ffff88021a055a78 RSI: 0040402222a92a80 RDI: ffff88021a780070 RBP: ffff88021a055a68 R08: ffff88021a055ba4 R09: 0000000000000010 R10: 0000000000000000 R11: 00000002a02e1000 R12: ffff88021a055ad4 R13: 0000000000000598 R14: ffffffffa0338470 R15: ffff88021a055ba4 FS: 0000000000000000(0000) GS:ffff88033fca0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f467c0291b8 CR3: 0000000001a0b000 CR4: 00000000000007e0 Stack: ffff88021a055ab8 ffffffffa0332020 ffff88021a055b30 0000000000000001 ffff88021a055b30 0000000000000000 ffff88021a055b18 0000000000000000 ffff88021a055ba4 ffff88021a055b98 ffff88021a055ae8 ffffffffa033304c Call Trace: [<ffffffffa0332020>] sm_ll_lookup_bitmap+0x40/0xa0 [dm_persistent_data] [<ffffffffa033304c>] sm_metadata_count_is_more_than_one+0x8c/0xc0 [dm_persistent_data] [<ffffffffa0333825>] dm_tm_shadow_block+0x65/0x110 [dm_persistent_data] [<ffffffffa0331b00>] sm_ll_mutate+0x80/0x300 [dm_persistent_data] [<ffffffffa0330e60>] ? set_ref_count+0x10/0x10 [dm_persistent_data] [<ffffffffa0331dba>] sm_ll_inc+0x1a/0x20 [dm_persistent_data] [<ffffffffa0332270>] sm_disk_new_block+0x60/0x80 [dm_persistent_data] [<ffffffff81520036>] ? down_write+0x16/0x40 [<ffffffffa001e5c4>] dm_pool_alloc_data_block+0x54/0x80 [dm_thin_pool] [<ffffffffa001b23c>] alloc_data_block+0x9c/0x130 [dm_thin_pool] [<ffffffffa001c27e>] provision_block+0x4e/0x180 [dm_thin_pool] [<ffffffffa001fe9a>] ? dm_thin_find_block+0x6a/0x110 [dm_thin_pool] [<ffffffffa001c57a>] process_bio+0x1ca/0x1f0 [dm_thin_pool] [<ffffffff8111e2ed>] ? mempool_free+0x8d/0xa0 [<ffffffffa001d755>] process_deferred_bios+0xc5/0x230 [dm_thin_pool] [<ffffffffa001d911>] do_worker+0x51/0x60 [dm_thin_pool] [<ffffffff81067872>] process_one_work+0x182/0x3b0 [<ffffffff81068c90>] worker_thread+0x120/0x3a0 [<ffffffff81068b70>] ? manage_workers+0x160/0x160 [<ffffffff8106eb2e>] kthread+0xce/0xe0 [<ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff8152af6c>] ret_from_fork+0x7c/0xb0 [<ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff8152af6c>] ret_from_fork+0x7c/0xb0 [<ffffffff8106ea60>] ? kthread_freezable_should_stop+0x70/0x70 Signed-off-by:
-
Mikulas Patocka authored
commit 718822c1 upstream. The dm-delay target uses a shared workqueue for multiple instances. This can cause deadlock if two or more dm-delay targets are stacked on the top of each other. This patch changes dm-delay to use a per-instance workqueue. Signed-off-by:
-
Joe Thornber authored
commit ed9571f0 upstream. An old array block could have its reference count decremented below zero when it is being replaced in the btree by a new array block. The fix is to increment the old ablock's reference count just before inserting a new ablock into the btree. Signed-off-by:
-
Mikulas Patocka authored
commit 76f5bee5 upstream. The module parameter stats_current_allocated_bytes in dm-mod is read-only. This parameter informs the user about memory consumption. It is not supposed to be changed by the user. However, despite being read-only, this parameter can be set on modprobe or insmod command line: modprobe dm-mod stats_current_allocated_bytes=12345 The kernel doesn't expect that this variable can be non-zero at module initialization and if the user sets it, it results in warning. This patch initializes the variable in the module init routine, so that user-supplied value is ignored. Signed-off-by:
-
Mikulas Patocka authored
commit 230c83af upstream. There is a possible leak of snapshot space in case of crash. The reason for space leaking is that chunks in the snapshot device are allocated sequentially, but they are finished (and stored in the metadata) out of order, depending on the order in which copying finished. For example, supposed that the metadata contains the following records SUPERBLOCK METADATA (blocks 0 ... 250) DATA 0 DATA 1 DATA 2 ... DATA 250 Now suppose that you allocate 10 new data blocks 251-260. Suppose that copying of these blocks finish out of order (block 260 finished first and the block 251 finished last). Now, the snapshot device looks like this: SUPERBLOCK METADATA (blocks 0 ... 250, 260, 259, 258, 257, 256) DATA 0 DATA 1 DATA 2 ... DATA 250 DATA 251 DATA 252 DATA 253 DATA 254 DATA 255 METADATA (blocks 255, 254, 253, 252, 251) DATA 256 DATA 257 DATA 258 DATA 259 DATA 260 Now, if the machine crashes after writing the first metadata block but before writing the second metadata block, the space for areas DATA 250-255 is leaked, it contains no valid data and it will never be used in the future. This patch makes dm-snapshot complete exceptions in the same order they were allocated, thus fixing this bug. Note: when backporting this patch to the stable kernel, change the version field in the following way: * if version in the stable kernel is {1, 11, 1}, change it to {1, 12, 0} * if version in the stable kernel is {1, 10, 0} or {1, 10, 1}, change it to {1, 10, 2} Userspace reads the version to determine if the bug was fixed, so the version change is needed. Signed-off-by:
-
Mikulas Patocka authored
commit 4cb57ab4 upstream. Some module parameters in dm-bufio are read-only. These parameters inform the user about memory consumption. They are not supposed to be changed by the user. However, despite being read-only, these parameters can be set on modprobe or insmod command line, for example: modprobe dm-bufio current_allocated_bytes=12345 The kernel doesn't expect that these variables can be non-zero at module initialization and if the user sets them, it results in BUG. This patch initializes the variables in the module init routine, so that user-supplied values are ignored. Signed-off-by:
-
David Sterba authored
commit e43f998e upstream. If btrfs_ioctl_snap_destroy blocks on the mutex and the process is killed, mnt_write count is unbalanced and leads to unmountable filesystem. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Dan Carpenter authored
commit 700ff4f0 upstream. The closing parenthesis is in the wrong place. We want to check "sizeof(*arg->clone_sources) * arg->clone_sources_count" instead of "sizeof(*arg->clone_sources * arg->clone_sources_count)". Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Jie Liu <jeff.liu@oracle.com> Signed-off-by:
-
Dan Carpenter authored
commit 3189ef02 upstream. We introduced a couple new error paths which are missing unlocks. Fixes: 7760e148 ('[media] af9035: Don't use dynamic static allocation') Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
Antti Palosaari authored
commit 0c413d10 upstream. It is IT9135 dual design. Thanks to Michael Piko for reporting that! Reported-by:
Michael Piko <michael@piko.com.au> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Hans Verkuil authored
commit 3af41a33 upstream. Commit 5aa9ae5e inverted the mute control state test in s_routing which caused the audio routing to fail. This broke ivtv support for the Hauppauge video/audio input bracket (which adds additional video and audio inputs) all the way back in kernel 2.6.36. This fix fixes the condition and it also removes a nonsense check on the balance control. Bisected-by:
Rajil Saraswat <rajil.s@gmail.com> Signed-off-by:
Andy Walls <awalls@md.metrocast.net> Reported-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Antti Palosaari authored
commit d18a88b1 upstream. Driver did not work anymore since I2C has gone broken due to recent commit: commit 37ebaf68 [media] dvb-frontends: Don't use dynamic static allocation Signed-off-by:
-
Hans Verkuil authored
commit f8e1b699 upstream. The no_video flag was checked in all other cases except one. Calling v4l2_ctrl_handler_setup() if no_video is 1 will crash. This wasn't noticed before since there are only two card types that set no_video to 1, so this type of hardware is quite rare. Signed-off-by:
Lorenz Röhrl <sheepshit@gmx.de> Tested-by:
-
Hans Verkuil authored
commit 9ba6a91f upstream. When adding frequency clamping to the tef6862 and radio-tea5764 drivers I forgot to actually *assign* the clamp result to the frequency. Signed-off-by:
Hans Petter Selasky <hps@bitfrost.no> Signed-off-by:
-
Wei Yongjun authored
commit 89f4d45b upstream. In case of error, the function kthread_run() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
H. Peter Anvin authored
commit 503cf95c upstream. When compiling with icc, <linux/compiler-gcc.h> ends up included because the icc environment defines __GNUC__. Thus, we neither need nor want to have this macro defined in both compiler-gcc.h and compiler-intel.h, and the fact that they are inconsistent just makes the compiler spew warnings. Reported-by:
Sunil K. Pandey <sunil.k.pandey@intel.com> Cc: Kevin B. Smith <kevin.b.smith@intel.com> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/n/tip-0mbwou1zt7pafij09b897lg3@git.kernel.orgSigned-off-by:
-
H. Peter Anvin authored
commit 8b3b005d upstream. In checkin 5551a34e x86-64, build: Always pass in -mno-sse we unconditionally added -mno-sse to the main build, to keep newer compilers from generating SSE instructions from autovectorization. However, this did not extend to the special environments (arch/x86/boot, arch/x86/boot/compressed, and arch/x86/realmode/rm). Add -mno-sse to the compiler command line for these environments, and add -mno-mmx to all the environments as well, as we don't want a compiler to generate MMX code either. This patch also removes a $(cc-option) call for -m32, since we have long since stopped supporting compilers too old for the -m32 option, and in fact hardcode it in other places in the Makefiles. Reported-by:
Kevin B. Smith <kevin.b.smith@intel.com> Cc: Sunil K. Pandey <sunil.k.pandey@intel.com> Signed-off-by:
-
cpw authored
commit 3eae49ca upstream. The SGI UV tlb shootdown code panics the system with a NULL pointer deference if 'nobau' is specified on the boot commandline. uv_flush_tlb_other() gets called for every flush, whether the BAU is disabled or not. It should not be keeping the s_enters statistic while the BAU is disabled. The panic occurs because during initialization init_per_cpu_tunables() does not set the bcp->statp pointer if 'nobau' was specified. Signed-off-by:
Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/E1VnzBi-0005yF-MU@eag09.americas.sgi.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Matthew Garrett authored
commit 04bf9ba7 upstream. UEFI time services are often broken once we're in virtual mode. We were already refusing to use them on 64-bit systems, but it turns out that they're also broken on some 32-bit firmware, including the Dell Venue. Disable them for now, we can revisit once we have the 1:1 mappings code incorporated. Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Link: http://lkml.kernel.org/r/1385754283-2464-1-git-send-email-matthew.garrett@nebula.com Cc: Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Alex Deucher authored
commit ffd3d336 upstream. When probing the bus, we need to set the byte count to 0 rather than 1. v2: Don't count the first byte. bug: https://bugzilla.kernel.org/show_bug.cgi?id=66241Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 0ca223b0 upstream. Some boards seem to have garbage in the upper 16 bits of the vram size register. Check for this and clamp the size properly. Fixes boards reporting bogus amounts of vram. Signed-off-by:
-
Alex Deucher authored
commit 55d4e020 upstream. Seems to work like the DCE3 version despite what the register spec says. bug: https://bugs.freedesktop.org/show_bug.cgi?id=71975Signed-off-by:
-
Alex Deucher authored
commit 180f805f upstream. Copy-paste typo. Value should be 0-2, not 0-1. Noticed-by:
Sylvain BERTRAND <sylware@legeek.net> Signed-off-by:
-
Paulo Zanoni authored
commit a1216444 upstream. When I submitted the first patch adding these force wake functions, Chris Wilson observed that I was using the wrong functions, so I sent a second version of the patch to correct this problem. The problem is that v1 was merged instead of v2. I was able to notice the problem when running the debugfs-forcewake-user subtest of pm_pc8 from intel-gpu-tools. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Carolyn Wyborny authored
commit df29df92 upstream. This patch changes the igb_phy_has_link function to check the value of the parameter before deciding to use udelay or mdelay in order to be sure that the value is not too high for udelay function. Signed-off-by:
Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Maxime Ripard authored
commit e9c56f8d upstream. The sun4i-emac driver uses devm_request_irq at .ndo_open time, but relies on the managed device mechanism to actually free it. This causes an issue whenever someone wants to restart the interface, the interrupt still being held, and not yet released. Fall back to using the regular request_irq at .ndo_open time, and introduce a free_irq during .ndo_stop. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Ujjal Roy authored
commit 517543fd upstream. For IBSS join if the requested SSID matches current SSID, it returns without freeing the allocated beacon IE buffer. Signed-off-by:
Ujjal Roy <royujjal@gmail.com> Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Johannes Berg authored
commit 60765a47 upstream. The station ID must be valid, if it's out of range then the array access may crash. Validate the station ID to the array length, and also validate the drain value even if that doesn't matter all that much. Fixes: 8ca151b5 ("iwlwifi: add the MVM driver") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 051a41fa upstream. Multicast frames can't be transmitted as part of an aggregation session (such a session couldn't even be set up) so don't try to reorder them. Trying to do so would cause the reorder to stop working correctly since multicast QoS frames (as transmitted by the Aruba APs this was found with) would cause sequence number confusion in the buffer. Reported-by:
Blaise Gassend <blaise@suitabletech.com> Signed-off-by:
-
Johannes Berg authored
commit 18db594a upstream. When changing cfg80211 to use RTNL locking, this caused a deadlock in mac80211 as it calls cfg80211_sched_scan_stopped() from a work item that's on a workqueue that is flushed with the RTNL held. Fix this by simply using schedule_work(), the work only needs to finish running before the wiphy is unregistered, no other synchronisation (e.g. with suspend) is really required since for suspend userspace is already blocked anyway when we flush the workqueue so will only pick up the event after resume. Fixes: 5fe231e8 ("cfg80211: vastly simplify locking") Reported-and-tested-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
-
