- 21 Aug, 2012 5 commits
-
-
Jesse Brandeburg authored
Some users report issues with link failing when connected to certain switches. This gives the user the ability to control the MDI state from the driver, allowing users to work around some improperly behaving switches. Forcing in this driver is for now only allowed when auto-neg is enabled. This is in regards to the related ethtool app patch and bugzilla.kernel.org bug 11998 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: bruce.w.allan@intel.com CC: n.poppelier@xs4all.nl CC: bastien@durel.org CC: jsveiga@it.eng.br Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
This is the implementation in e1000 to allow ethtool to force MDI state, allowing users to work around some improperly behaving switches. Forcing in this driver is for now only allowed when auto-neg is enabled. To use must have the matching version of ethtool app that supports this functionality. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
In order for igb to support MDI setting support via ethtool this code is needed to allow setting the MDI state via software. This is in regards to the related ethtool patch Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce W Allan authored
In order for e1000e to support MDI setting support via ethtool this code is needed to allow setting the MDI state via software. This is in regards to the related ethtool patch and fixes bugzilla.kernel.org bug 11998 Signed-off-by: Bruce W Allan <bruce.w.allan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
This change modifies the core ethtool struct to allow a driver to support setting of MDI/MDI-X state for twisted pair wiring. This change uses a previously reserved u8 and should not change any binary compatibility of ethtool. Also as per Ben Hutchings' suggestion, the capabilities are stored in a separate byte so the driver can report if it supports changing settings. see thread: http://kerneltrap.org/mailarchive/linux-netdev/2010/11/17/6289820/thread see ethtool patches titled: ethtool: allow setting MDI-X state Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Ben Hutchings <bhutchings@solarflare.com> Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 20 Aug, 2012 14 commits
-
-
Jiri Pirko authored
This is resolved by two things: 1) allow dev_addr of different length than ETH_ALEN 2) during port add, check for dev->type and change it if necessary Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ppwaskie/net-nextDavid S. Miller authored
Peter P Waskiewicz Jr says: ==================== This series contains multiple updates to the ixgbe driver. The following are changes since commit 02644a17: sctp: fix bogus if statement in sctp_auth_recv_cid() and are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/ppwaskie/net-next master Alexander Duyck (9): ixgbe: Remove code that was initializing Rx page offset ixgbe: combine ixgbe_add_rx_frag and ixgbe_can_reuse_page ixgbe: Only use double buffering if page size is less than 8K ixgbe: Have the CPU take ownership of the buffers sooner ixgbe: Make pull tail function separate from rest of cleanup_headers ixgbe: Copybreak sooner to avoid get_page/put_page and offset change overhead ixgbe: Make allocating skb and placing data in it a separate function ixgbe: Roll RSC code into non-EOP code ixgbe: Rewrite code related to configuring IFCS bit in Tx descriptor ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ying Xue authored
Gets rid of the need for users to specify the maximum number of name publications supported by TIPC. TIPC now automatically provides support for the maximum number of name publications to 65535. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ying Xue authored
Gets rid of the need for users to specify the maximum number of name subscriptions supported by TIPC. TIPC now automatically provides support for the maximum number of name subscriptions to 65535. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ying Xue authored
Added to the following: - tipc_random - tipc_own_addr - tipc_max_ports - tipc_net_id - tipc_remote_management - handler_enabled The above global variables are read often, but written rarely. Use __read_mostly to prevent them being on the same cacheline as another variable which is written to often, which would cause cacheline bouncing. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ying Xue authored
There is nothing changing this variable dynamically, so change it to a macro to make that more obvious when reading the code. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ying Xue authored
Since now tipc_net_start() always returns a success code - 0, its return value type should be changed from integer to void, which can avoid unnecessary check for its return value. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ying Xue authored
After eliminating the mechanism which checks whether all letters in media name string are within a given character set, the media_name_valid routine becomes trivial. It is also only used once, so it is unnecessary to keep it as a separate function. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ying Xue authored
There is no real reason to check whether all letters in the given media name and network interface name are within the character set defined in tipc_alphabet array. Even if we eliminate the checking, the rest of checking conditions in tipc_enable_bearer() can ensure we do not enable an invalid or illegal bearer. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ying Xue authored
When the lockdep validator is enabled, it will report the below warning when we enable a TIPC bearer: [ INFO: possible irq lock inversion dependency detected ] --------------------------------------------------------- Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(ptype_lock); local_irq_disable(); lock(tipc_net_lock); lock(ptype_lock); <Interrupt> lock(tipc_net_lock); *** DEADLOCK *** the shortest dependencies between 2nd lock and 1st lock: -> (ptype_lock){+.+...} ops: 10 { [...] SOFTIRQ-ON-W at: [<c1089418>] __lock_acquire+0x528/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c182da75>] arp_init+0x1a/0x48 [<c182dce5>] inet_init+0x181/0x27e [<c1001114>] do_one_initcall+0x34/0x170 [<c17f7329>] kernel_init+0x110/0x1b2 [<c155b6a2>] kernel_thread_helper+0x6/0x10 [...] ... key at: [<c17e4b10>] ptype_lock+0x10/0x20 ... acquired at: [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c8bc18d2>] enable_bearer+0xf2/0x140 [tipc] [<c8bb283a>] tipc_enable_bearer+0x1ba/0x450 [tipc] [<c8bb3a04>] tipc_cfg_do_cmd+0x5c4/0x830 [tipc] [<c8bbc032>] handle_cmd+0x42/0xd0 [tipc] [<c148e802>] genl_rcv_msg+0x232/0x280 [<c148d3f6>] netlink_rcv_skb+0x86/0xb0 [<c148e5bc>] genl_rcv+0x1c/0x30 [<c148d144>] netlink_unicast+0x174/0x1f0 [<c148ddab>] netlink_sendmsg+0x1eb/0x2d0 [<c1456bc1>] sock_aio_write+0x161/0x170 [<c1135a7c>] do_sync_write+0xac/0xf0 [<c11360f6>] vfs_write+0x156/0x170 [<c11361e2>] sys_write+0x42/0x70 [<c155b0df>] sysenter_do_call+0x12/0x38 [...] } -> (tipc_net_lock){+..-..} ops: 4 { [...] IN-SOFTIRQ-R at: [<c108953a>] __lock_acquire+0x64a/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c15541cd>] _raw_read_lock_bh+0x3d/0x50 [<c8bb874d>] tipc_recv_msg+0x1d/0x830 [tipc] [<c8bc195f>] recv_msg+0x3f/0x50 [tipc] [<c146a5fa>] __netif_receive_skb+0x22a/0x590 [<c146ab0b>] netif_receive_skb+0x2b/0xf0 [<c13c43d2>] pcnet32_poll+0x292/0x780 [<c146b00a>] net_rx_action+0xfa/0x1e0 [<c103a4be>] __do_softirq+0xae/0x1e0 [...] } >From the log, we can see three different call chains between CPU0 and CPU1: Time 0 on CPU0: kernel_init()->inet_init()->dev_add_pack() At time 0, the ptype_lock is held by CPU0 in dev_add_pack(); Time 1 on CPU1: tipc_enable_bearer()->enable_bearer()->dev_add_pack() At time 1, tipc_enable_bearer() first holds tipc_net_lock, and then wants to take ptype_lock to register TIPC protocol handler into the networking stack. But the ptype_lock has been taken by dev_add_pack() on CPU0, so at this time the dev_add_pack() running on CPU1 has to be busy looping. Time 2 on CPU0: netif_receive_skb()->recv_msg()->tipc_recv_msg() At time 2, an incoming TIPC packet arrives at CPU0, hence tipc_recv_msg() will be invoked. In tipc_recv_msg(), it first wants to hold tipc_net_lock. At the moment, below scenario happens: On CPU0, below is our sequence of taking locks: lock(ptype_lock)->lock(tipc_net_lock) On CPU1, our sequence of taking locks looks like: lock(tipc_net_lock)->lock(ptype_lock) Obviously deadlock may happen in this case. But please note the deadlock possibly doesn't occur at all when the first TIPC bearer is enabled. Before enable_bearer() -- running on CPU1 does not hold ptype_lock, so the TIPC receive handler (i.e. recv_msg()) is not registered successfully via dev_add_pack(), so the tipc_recv_msg() cannot be called by recv_msg() even if a TIPC message comes to CPU0. But when the second TIPC bearer is registered, the deadlock can perhaps really happen. To fix it, we will push the work of registering TIPC protocol handler into workqueue context. After the change, both paths taking ptype_lock are always in process contexts, thus, the deadlock should never occur. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ying Xue authored
Ethernet media initialization is only done when TIPC is started or switched to network mode. So the initialization of the network device notifier structure can be moved out of this function and done statically instead. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Reported value is the same reported by the FANOUT getsockoption, but unlike it, the absent fanout setup results in absent nlattr, rather than in nlattr with zero value. This is done so, since zero fanout report may mean both -- no fanout, and fanout with both id and type zero. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
One extension bit may result in two nlattrs -- one per ring type. If some ring type is not configured, then the respective nlatts will be empty. The structure reported contains the data, that is given to the corresponding ring setup socket option. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There is a one byte hole between p->hop_limit and p->flowinfo where stack memory is leaked to the user. This was introduced in c12b395a "gre: Support GRE over IPv6". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-
- 17 Aug, 2012 1 commit
-
-
Fan Du authored
Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Aug, 2012 11 commits
-
-
Alexander Duyck authored
This change updates the code related to configuring the transmit frame checksum. Specifically I have updated the code so that we can only skip inserting the checksum in the case that we are not performing some other offload that will modify the frame data. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
-
Alexander Duyck authored
This change moves the RSC code into the non-EOP descriptor handling function. The main motivation behind this change is to help reduce the overhead in the non-RSC case. Previously the non-RSC path code would always be checking for append count even if RSC had been disabled. Now this code is completely skipped in a single conditional check instead of having to make two separate checks. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
-
Alexander Duyck authored
This patch creates a function named ixgbe_fetch_rx_buffer. The sole purpose of this function is to retrieve a single buffer off of the ring and to place it in an skb. The advantage to doing this is that it helps improve the readability since I can decrease the indentation and for the code in this section. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
-
Alexander Duyck authored
This change makes it so that if only the first 256 bytes of a buffer are used we just copy the data out and leave the offset and page count unchanged. There are multiple advantages to this. First it allows us to reuse the page much more in the case of pages larger than 4K. It also allows us to avoid some expensive atomic operations in the form of get_page/put_page. In perf I have seen CPU utilization for put_page drop from 3.5% to 1.8% as a result of this patch when doing small packet routing, and packet rates increased by about 3%. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
-
Alexander Duyck authored
This change creates a separate function for functionality similar to pskb_pull_tail. The main motivation for moving it to a separate function is so that later I can just skip this function in the case where we have already copied the buffer into skb->head. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
-
Alexander Duyck authored
This patch makes it so that we will always have ownership of the buffers by the time we get to ixgbe_add_rx_frag. This is necessary as I am planning to add a copy-break to ixgbe_add_rx_frag and in order for that to function correctly we need the CPU to have ownership of the buffer. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
-
Alexander Duyck authored
This change makes it so that we do not use double buffering if the page size is larger than 4K. Instead we will simply walk through the page using up to 3K per receive, and if we receive less than we only move the offset by that amount. We will free the page when there is no longer any space left that we can use instead of checking the page count to see if we can cycle back to the start. The main motivation behind this is to avoid the unnecessary truesize cost for using a half page when most packets are 2K or smaller. With this new approach the largest possible truesize for a page fragment will be 3K when PAGE_SIZE is larger than 4K. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
-
Alexander Duyck authored
This patch combines ixgbe_add_rx_frag and ixgbe_can_reuse_page into a single function. The main motivation behind this is to make better use of the values so that we don't have to load them from memory and into registers twice. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
-
Alexander Duyck authored
This change reverts an earlier patch that introduced ixgbe_init_rx_page_offset. The idea behind the function was to provide some variation in the starting offset for the page in order to reduce hot-spots in the cache. However it doesn't appear to provide any significant benefit in the testing I have done. It has however been a source of several bugs, and it blocks us from being able to use 2K fragments on larger page sizes. So the decision I made was to remove it. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
-
Dan Carpenter authored
There is an extra semi-colon here, so we always return 0 instead of calling __sctp_auth_cid(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ulrich Weber authored
struct seq_net_private has no struct net if CONFIG_NET_NS is not enabled Signed-off-by: Ulrich Weber <ulrich.weber@sophos.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 15 Aug, 2012 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== This is a batch of updates intended for 3.7. The ath9k, mwifiex, and b43 drivers get the bulk of the commits this time, with a handful of other driver bits thrown-in. It is mostly just minor fixes and cleanups, etc. Also included is a Bluetooth pull, with a lot of refactoring. Gustavo says: "These are the changes I queued for 3.7. There are a many small fixes/improvements by Andre Guedes. A l2cap channel refcounting refactor by Jaganath. Bluetooth sockets now appears in /proc/net, by Masatake Yamato and Sachin Kamat changes ours drivers to use devm_kzalloc()." ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Razvan Ghitulete authored
The field tp->snd_wl1 is twice initialized, the second time seems to be wrong as it may overwrite any update in tcp_ack. Signed-off-by: Razvan Ghitulete <rghitulete@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fan Du authored
Sematically speaking, xfrm_mgr.acquire is called when kernel intends to ask user space IKE daemon to negotiate SAs with peers. IOW the direction will *always* be XFRM_POLICY_OUT, so remove int dir for clarity. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
Cong Wang authored
I got the following compile error: In file included from include/net/sctp/checksum.h:46:0, from net/ipv4/netfilter/nf_nat_proto_sctp.c:14: include/net/sctp/sctp.h: In function ‘sctp_dbg_objcnt_init’: include/net/sctp/sctp.h:370:88: error: parameter name omitted include/net/sctp/sctp.h: In function ‘sctp_dbg_objcnt_exit’: include/net/sctp/sctp.h:371:88: error: parameter name omitted which is caused by commit 13d782f6 Author: Eric W. Biederman <ebiederm@xmission.com> Date: Mon Aug 6 08:45:15 2012 +0000 sctp: Make the proc files per network namespace. This patch could fix it. Cc: David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
Add struct net as a parameter to sctp_verify_param so it can be passed to sctp_verify_ext_param where struct net will be needed when the sctp tunables become per net tunables. Add struct net as a parameter to sctp_verify_init so struct net can be passed to sctp_verify_param. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
There are a handle of state machine functions primarily those dealing with processing INIT packets where there is neither a valid endpoint nor a valid assoication from which to derive a struct net. Therefore add struct net * to the parameter list of sctp_state_fn_t and update all of the state machine functions. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
struct net will be needed shortly when the tunables are made per network namespace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-