- 03 Mar, 2016 17 commits
-
-
Matias Bjørling authored
The struct rrpc->nr_pages can easily be interpreted as the number of flash pages allocated to rrpc, while it is the nr_sects. Make sure that this is reflected from the variable name. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Javier González authored
When an I/O finishes, full blocks are moved from the open to the closed list - a lock is taken to protect the list. This happens at the moment in the interrupt context, which is not correct. This patch moves this logic to the block workqueue instead, avoiding holding a spinlock without interrupt save in an interrupt context. Signed-off-by: Javier González <javier@cnexlabs.com> Fixes: ff0e498b ("lightnvm: manage open and closed blocks sepa...") Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Konrad Rzeszutek Wilk authored
The processes names are truncated to 17, while we had the length of the process as name 20 - which meant that while we filled it out with various details - the last 3 characters (which had the queue number) never surfaced to the user-space. To simplify this and be able to fit the device name, domain id, and the queue number we remove the 'blkback' from the name. Prior to this patch the device name is "blkback.<domid>.<name>" for example: blkback.8.xvda, blkback.11.hda. With the multiqueue block backend we add "-%d" for the queue. But sadly this is already way past the limit so it gets stripped. Possible solution had been identified by Ian: http://lists.xenproject.org/archives/html/xen-devel/2015-05/msg03516.html " If you are pressed for space then the "xvd" is probably a bit redundant in a string which starts blkbk. The guest may not even call the device xvdN (iirc BSD has another prefix) any how, so having blkback say so seems of limited use anyway. Since this seems to not include a partition number how does this work in the split partition scheme? (i.e. one where the guest is given xvda1 and xvda2 rather than xvda with a partition table) [It will be 'blkback.8.xvda1', and 'blkback.11.xvda2'] Perhaps something derived from one of the schemes in http://xenbits.xen.org/docs/unstable/misc/vbd-interface.txt might be a better fit? After a bit of discussion (see http://lists.xenproject.org/archives/html/xen-devel/2015-12/msg01588.html) we settled on dropping the "blback" part. This will make it possible to have the <domid>.<name>-<queue>: [1.xvda-0] [1.xvda-1] And we enough space to make it go up to: [32100.xvdfg9-5] Acked-by: Roger Pau Monné <roger.pau@citrix.com> Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Matias Bjørling authored
When the media manager runs in dual or quad plane mode, lightnvm abstracts away plane specific commands. This poses a problem for get bad block table, as it reports bad blocks per plane, making the table either two or four times bigger than expected. Fold the bad block list before returning. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Alan authored
Instead of checking a constant 0 actually check the space available. Even better remember to allow for the header and also check the right amount of space is needed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Jan Beulich authored
There's no reason to defer this until the connect phase, and in fact there are frontend implementations expecting this to be available earlier. Move it into the probe function. Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Jan Beulich authored
"max" is rather ambiguous and carries pretty little meaning, the more that there are also "max_queues" and "max_ring_page_order". Make this "max_indirect_segments" instead, and at once change the type from int to uint (to match the respective variable's type). Acked-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Asai Thambi SP authored
Fail all pending requests after surprise removal of a drive. Signed-off-by: Vignesh Gunasekaran <vgunasekaran@micron.com> Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
Asai Thambi SP authored
Added timeout handler. Replaced blk_mq_end_request() with blk_mq_complete_request() to avoid double completion of a request. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Rajesh Kumar Sambandam <rsambandam@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
Asai Thambi SP authored
Allow device initialization to finish gracefully when it is in FTL rebuild failure state. Also, recover device out of this state after successfully secure erasing it. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Vignesh Gunasekaran <vgunasekaran@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
Asai Thambi SP authored
Flush inflight IOs using fsync_bdev() when the device is safely removed. Also, block further IOs in device open function. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Rajesh Kumar Sambandam <rsambandam@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
Asai Thambi SP authored
When FTL rebuild is in progress, alloc_disk() initializes the disk but device node will be created by add_disk() only after successful completion of FTL rebuild. So, skip deletion of device node in removal path when FTL rebuild is in progress. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
Asai Thambi SP authored
Prevent standby immediate command from being issued in remove, suspend and shutdown paths, while drive is in FTL rebuild process. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Vignesh Gunasekaran <vgunasekaran@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
Asai Thambi SP authored
Print exact time when an internal command is interrupted. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Rajesh Kumar Sambandam <rsambandam@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
Asai Thambi SP authored
Remove setting and clearing MTIP_PF_EH_ACTIVE_BIT flag in mtip_handle_tfe() as they are redundant. Also avoid waking up service thread from mtip_handle_tfe() because it is already woken up in case of taskfile error. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Rajesh Kumar Sambandam <rsambandam@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
Asai Thambi SP authored
Service thread does not detect the need for taskfile error hanlding. Fixed the flag condition to process taskfile error. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
-
git://git.pengutronix.de/git/mpa/linux-nbdJens Axboe authored
NBD for 4.6 Markus writes: This pull request contains 7 patches for 4.6. Patch 1 fixes some unnecessarily complicated code I introduced some versions ago for debugfs. Patch 2 removes the criticised signal usage within NBD to kill the NBD threads after a timeout. This code was used for the last years and is now replaced by simply killing the tcp connection. Patches 3-6 are some smaller cleanups. Patch 7 uevents for the userspace. This way udev/systemd can react on connected NBD devices.
-
- 29 Feb, 2016 5 commits
-
-
Ming Lin authored
For NVMe over Fabrics, the cntlid will be used by systemd/udev to create link to the device, for example, /dev/disk/by-path/<fabrics-info>-<cntlid>-<namespace> -> /dev/nvme0n1 Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Christoph Hellwig authored
Both LighNVM and NVMe over Fabrics need to look at more than just the status and result field. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matias Bj?rling <m@bjorling.me> Reviewed-by: Jay Freyensee <james.p.freyensee@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Christoph Hellwig authored
The only work left in the kthread is the periodic health check for each controller. There is no need to run this from process context or keep a thread context around for it, so replace it with a simpler timer. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Christoph Hellwig authored
There is no reason to do unconditional polling of CQs per the NVMe spec. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Christoph Hellwig authored
Use a dedicated work item to submit async event requests instead of the global kthread. This simplifies the code and reduces the latencies to resubmit a request once an even notification happened. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 15 Feb, 2016 1 commit
-
-
Markus Pargmann authored
The userspace needs to know when nbd devices are ready for use. Currently no events are created for the userspace which doesn't work for systemd. See the discussion here: https://github.com/systemd/systemd/pull/358 This patch uses a central point to setup the nbd-internal sizes. A ioctl to set a size does not lead to a visible size change. The size of the block device will be kept at 0 until nbd is connected. As soon as it connects, the size will be changed to the real value and a uevent is created. When disconnecting, the blockdevice is set to 0 size and another uevent is generated. Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
-
- 10 Feb, 2016 5 commits
-
-
Ming Lin authored
NVMe over Fabrics drivers are going to reuse the core, so splits nvme.ko into 2 modules: nvme-core.ko: the core part nvme.ko: the PCI driver Export symbols from nvme-core.ko. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Ming Lin authored
Split dev_list_lock into one in the core and one in the PCI driver. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Ming Lin authored
These variables are used by PCI driver and will also be used in the forthcoming NVMe over Fabrics drivers. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Sagi Grimberg authored
We don't want to be able to unload the fabric driver when we have openened referenced to our namespaces. Thus, for each nvme_open we take a reference on the fabric driver and put it in nvme_release. This behavior is consistent with the scsi model. This resolves the panic when unloading a fabric module with mpath holders. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ian Bakshan <ianb@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Sagi Grimberg authored
Having the ctrl name "nvmeX" seems much more friendly than the underlying device name. Also, with other nvme transports such as the soon to come nvme-loop we don't have an underlying device so it doesn't makes sense to make up one. In order to help matching an instance name to a pci function, we add a info print in nvme_probe. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Keith Busch <keith.busch@intel.com> Manually fixed up the hunk in nvme_cancel_queue_ios(). Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 09 Feb, 2016 3 commits
-
-
Christoph Hellwig authored
Pass the right private data to device_create_with_groups from the beginning, and remove the superflous call to dev_set_drvdata. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Keith Busch authored
This notifies blk-mq when the tag set contains a different number of queues prior to freeing unused ones that the request queue points to. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Keith Busch authored
The hardware's provided queue count may change at runtime with resource provisioning. This patch allows a block driver to alter the number of h/w queues available when its resource count changes. The main part is a new blk-mq API to request a new number of h/w queues for a given live tag set. The new API freezes all queues using that set, then adjusts the allocated count prior to remapping these to CPUs. The bulk of the rest just shifts where h/w contexts and all their artifacts are allocated and freed. The number of max h/w contexts is capped to the number of possible cpus since there is no use for more than that. As such, all pre-allocated memory for pointers need to account for the max possible rather than the initial number of queues. A side effect of this is that the blk-mq will proceed successfully as long as it can allocate at least one h/w context. Previously it would fail request queue initialization if less than the requested number was allocated. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
- 05 Feb, 2016 5 commits
-
-
Dan Streetman authored
Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by: Dan Streetman <dan.streetman@canonical.com> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
-
Markus Pargmann authored
nbd changes properties of the blockdevice depending on flags that were received. This patch moves this flag parsing into a separate function nbd_parse_flags(). Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
-
Markus Pargmann authored
Group all variables that are reset after a disconnect into reset functions. This patch adds two of these functions, nbd_reset() and nbd_bdev_reset(). Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
-
Markus Pargmann authored
It may be useful to know in the client that a connection timed out. The current code returns success for a timeout. This patch reports the error code -ETIMEDOUT for a timeout. Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
-
Markus Pargmann authored
As discussed on the mailing list, the usage of signals for timeout handling has a lot of potential issues. The nbd driver used for some time signals for timeouts. These signals where able to get the threads out of the blocking socket operations. This patch removes all signal usage and uses a socket shutdown instead. The socket descriptor itself is cleared later when the whole nbd device is closed. The tasks_lock is removed as we do not depend on this anymore. Instead a new lock for the socket is introduced so we can safely work with the socket in the timeout handler outside of the two main threads. Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
- 04 Feb, 2016 4 commits
-
-
Jan Kara authored
Currently we don't allow sync workload of one cgroup to preempt sync workload of any other cgroup. This is because we want to achieve service separation between cgroups. However in cases where cgroup preempting is ancestor of the current cgroup, there is no need of separation and idling introduces unnecessary overhead. This hurts for example the case when workload is isolated within a cgroup but journalling threads are in root cgroup. Simple way to demostrate the issue is using: dbench4 -c /usr/share/dbench4/client.txt -t 10 -D /mnt 1 on ext4 filesystem on plain SATA drive (mounted with barrier=0 to make difference more visible). When all processes are in the root cgroup, reported throughput is 153.132 MB/sec. When dbench process gets its own blkio cgroup, reported throughput drops to 26.1006 MB/sec. Fix the problem by making check in cfq_should_preempt() more benevolent and allow preemption by ancestor cgroup. This improves the throughput reported by dbench4 to 48.9106 MB/sec. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Jan Kara authored
The original idea with preemption of sync noidle queues (introduced in commit 718eee05 "cfq-iosched: fairness for sync no-idle queues") was that we service all sync noidle queues together, we don't idle on any of the queues individually and we idle only if there is no sync noidle queue to be served. This intention also matches the original test: if (cfqd->serving_type == SYNC_NOIDLE_WORKLOAD && new_cfqq->service_tree == cfqq->service_tree) return true; However since at that time cfqq->service_tree was not set for idling queues, this test was unreliable and was replaced in commit e4a22919 "cfq-iosched: fix no-idle preemption logic" by: if (cfqd->serving_type == SYNC_NOIDLE_WORKLOAD && cfqq_type(new_cfqq) == SYNC_NOIDLE_WORKLOAD && new_cfqq->service_tree->count == 1) return true; That was a reliable test but was actually doing something different - now we preempt sync noidle queue only if the new queue is the only one busy in the service tree. These days cfq queue is kept in service tree even if it is idling and thus the original check would be safe again. But since we actually check that cfq queues are in the same cgroup, of the same priority class and workload type (sync noidle), we know that new_cfqq is fine to preempt cfqq. So just remove the service tree check. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Jan Kara authored
Move check for preemption by rt class up. There is no functional change but it makes arguing about conditions simpler since we can be sure both cfq queues are from the same ioprio class. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jan Kara <jack@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
-
Jan Kara authored
There is no point in idling on a cfq group if the only cfq queue that is there has too big thinktime. Signed-off-by: Jan Kara <jack@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
-