Clean this function up and rework it into sensible shape. This function
now contains one single dev_err() instead of the previous insanity full
of memory allocation, chaotic string handling and use of SPRINTFCAT().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Clean this function up and rework it into sensible shape. This function
now contains one single dev_err() instead of the previous insanity full
of memory allocation, possible stack overwriting, chaotic string handling
and use of SPRINTFCAT().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Just dissolve this function so it's not in the way of applying
further white magic cleanup down the line.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix the functions which can be obviously done right with a simple
dev_err() now. While at it, further press the on-stack allocation
of buffer for sprintf() voodoo down into the abominated functions.

This patch cleans up most of the functions and leaves just two
remaining functions, report_ccb_status() and report_deco_status()
ugly and unhappy.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pass the error type string into the functions, so they can handle
the printing of the string. This is now still using the very unsafe
sprintf(), but we will fix that.

While at this, pass the device pointer too, so we can dev_err()
functions readily when we start fixing this proper.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Implement fast-path error code printout for errors with no associated
handler function. This reduces calls to this kmalloc() nonsense in
SPRINTFCAT() already.

Note that the format of output is compatible with the old code, even
if -- exposed like this -- it looks a bit weird. Checkpatch complains
on this one as well.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull the error code <-> error string mapping tables out of the function
so the code becomes readable. This lets me see the real flesh of the
functions, without all that flab clouding the view.

Note: There is a checkpatch issue with quoted strings across multiple
      lines. I will fix that in a subsequent patch to keep the changes
      small and separate.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The tentacles of this function were firmly attached to various
places in the CAAM code. Just cut them, or this cthulhu function
will sprout them anew.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The length shoule be 64 bit alignment and the block size shoule be 64 bit in aes cfb64 mode.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The block size of aes cfb8 mode shoule be 8 bit.
Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix leakage of memory for struct aead_request that is allocated via
aead_request_alloc() but not released via aead_request_free().
Reported by Coverity - CID 1163869.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix a potential memory leak in the error handling of test_aead_speed(). In case
crypto_alloc_aead() fails, the function returns without going through the
centralized cleanup path. Reported by Coverity - CID 1163870.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix a potential memory leak in the error handling of test_aead_speed(). In case
the size check on the associate data length parameter fails, the function goes
through the wrong exit label. Reported by Coverity - CID 1163870.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In case hash key is bigger than algorithm block size, it is hashed.
In this case, memory is allocated to keep this hash in hashed_key.
hashed_key has to be freed on the key_dma dma mapping error path.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

pm_runtime_get_sync may not always succeed depending on SoC involved.
So handle the error appropriately ensuring usage_count is accurate in
case of failure.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Reported-by: Joachim Eastwood <manabian@gmail.com>
Tested-by: Joachim Eastwood <manabian@gmail.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The driver for the "Picochip picoXcell true random number generator" was
added in v2.6.39. Its Kconfig symbol has always depended on
PICOXCELL_PC3X3. But that Kconfig symbol has never been part of the
tree. This means this driver has never been buildable. Let's remove it.
It can be re-added if its dependencies are actually part of the tree.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Patch adds large test-vectors for SHA algorithms for better code coverage in
optimized assembly implementations. Empty test-vectors are also added, as some
crypto drivers appear to have special case handling for empty input.
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

- The 4-byte sg_mid_buf is located in the middle of the coherence memory
sg_cpu. Don't call dma_map_single to get its physical address. Get the its
base physical address from the physical address of sg_cpu instead.
- Should set up the dma descriptor data after the 4-byte sg_mid_buf is
filled in completely from next sg buffer.
- memory copy from sg buffer should be done via virtual address.
- Remove unused reference to blackfin header
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

in case of multiple crc devices are probed.
Call platform_set_drvdata() before adding new CRC device into the list.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move architecture independant crc header file out of the blackfin folder.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

HW_RANDOM_ATMEL should not only default to ARCH_AT91, it should depend
on it. This driver is useless on other architectures.

Likewise, HW_RANDOM_EXYNOS should depend on ARCH_EXYNOS, as it it
useless on other architectures.

Also set the default to HW_RANDOM for the few architecture-specific
drivers which didn't have it yet, for consistency.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This makes configuration more convenient IMHO, and avoids having to
repeat the dependency on HW_RANDOM for every single driver.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

UML_RANDOM is the only hardware random number generator option which
does not depend on HW_RANDOM. Having it in the middle of the other
options breaks the alignment in "make menuconfig". Move it at the last
position to avoid that.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_ioremap_resource() because devm_request_and_ioremap() is
obsoleted by devm_ioremap_resource().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Joel Fernandes <joelf@ti.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This adds test cases for SHA-1, SHA-224, SHA-256 and AES-CCM with an input size
that is an exact multiple of the block size. The reason is that some
implementations use a different code path for these cases.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The internal key isn't actually in big-endian format so let's switch
to u128 which also happens to allow us to remove a sparse warning.

Based on suggestion by Ard Biesheuvel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>

Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 3.15:
   - Added 3DES driver for OMAP4/AM43xx
   - Added AVX2 acceleration for SHA
   - Added hash-only AEAD algorithms in caam
   - Removed tegra driver as it is not functioning and the hardware is
     too slow
   - Allow blkcipher walks over AEAD (needed for ARM)
   - Fixed unprotected FPU/SSE access in ghash-clmulni-intel
   - Fixed highmem crash in omap-sham
   - Add (zero entropy) randomness when initialising hardware RNGs
   - Fixed unaligned ahash comletion functions
   - Added soft module depedency for crc32c for initrds that use crc32c"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (60 commits)
  crypto: ghash-clmulni-intel - use C implementation for setkey()
  crypto: x86/sha1 - reduce size of the AVX2 asm implementation
  crypto: x86/sha1 - fix stack alignment of AVX2 variant
  crypto: x86/sha1 - re-enable the AVX variant
  crypto: sha - SHA1 transform x86_64 AVX2
  crypto: crypto_wq - Fix late crypto work queue initialization
  crypto: caam - add missing key_dma unmap
  crypto: caam - add support for aead null encryption
  crypto: testmgr - add aead null encryption test vectors
  crypto: export NULL algorithms defines
  crypto: caam - remove error propagation handling
  crypto: hash - Simplify the ahash_finup implementation
  crypto: hash - Pull out the functions to save/restore request
  crypto: hash - Fix the pointer voodoo in unaligned ahash
  crypto: caam - Fix first parameter to caam_init_rng
  crypto: omap-sham - Map SG pages if they are HIGHMEM before accessing
  crypto: caam - Dynamic memory allocation for caam_rng_ctx object
  crypto: allow blkcipher walks over AEAD data
  crypto: remove direct blkcipher_walk dependency on transform
  hwrng: add randomness to system from rng sources
  ...

Pull security subsystem updates from James Morris:
 "Apart from reordering the SELinux mmap code to ensure DAC is called
  before MAC, these are minor maintenance updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
  selinux: correctly label /proc inodes in use before the policy is loaded
  selinux: put the mmap() DAC controls before the MAC controls
  selinux: fix the output of ./scripts/get_maintainer.pl for SELinux
  evm: enable key retention service automatically
  ima: skip memory allocation for empty files
  evm: EVM does not use MD5
  ima: return d_name.name if d_path fails
  integrity: fix checkpatch errors
  ima: fix erroneous removal of security.ima xattr
  security: integrity: Use a more current logging style
  MAINTAINERS: email updates and other misc. changes
  ima: reduce memory usage when a template containing the n field is used
  ima: restore the original behavior for sending data with ima template
  Integrity: Pass commname via get_task_comm()
  fs: move i_readcount
  ima: use static const char array definitions
  security: have cap_dentry_init_security return error
  ima: new helper: file_inode(file)
  kernel: Mark function as static in kernel/seccomp.c
  capability: Use current logging styles
  ...

Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...

Pull HID updates from Jiri Kosina:
 - substantial cleanup of the generic and transport layers, in the
   direction of an ultimate goal of making struct hid_device completely
   transport independent, by Benjamin Tissoires
 - cp2112 driver from David Barksdale
 - a lot of fixes and new hardware support (Dualshock 4) to hid-sony
   driver, by Frank Praznik
 - support for Win 8.1 multitouch protocol by Andrew Duggan
 - other smaller fixes / device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits)
  HID: sony: fix force feedback mismerge
  HID: sony: Set the quriks flag for Bluetooth controllers
  HID: sony: Fix Sixaxis cable state detection
  HID: uhid: Add UHID_CREATE2 + UHID_INPUT2
  HID: hyperv: fix _raw_request() prototype
  HID: hyperv: Implement a stub raw_request() entry point
  HID: hid-sensor-hub: fix sleeping function called from invalid context
  HID: multitouch: add support for Win 8.1 multitouch touchpads
  HID: remove hid_output_raw_report transport implementations
  HID: sony: do not rely on hid_output_raw_report
  HID: cp2112: remove the last hid_output_raw_report() call
  HID: cp2112: remove various hid_out_raw_report calls
  HID: multitouch: add support of other generic collections in hid-mt
  HID: multitouch: remove pen special handling
  HID: multitouch: remove registered devices with default behavior
  HID: hidp: Add a comment that some devices depend on the current behavior of uniq
  HID: sony: Prevent duplicate controller connections.
  HID: sony: Perform a boundry check on the sixaxis battery level index.
  HID: sony: Fix work queue issues
  HID: sony: Fix multi-line comment styling
  ...

Pull trivial tree updates from Jiri Kosina:
 "Usual rocket science -- mostly documentation and comment updates"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  sparse: fix comment
  doc: fix double words
  isdn: capi: fix "CAPI_VERSION" comment
  doc: DocBook: Fix typos in xml and template file
  Bluetooth: add module name for btwilink
  driver core: unexport static function create_syslog_header
  mmc: core: typo fix in printk specifier
  ARM: spear: clean up editing mistake
  net-sysfs: fix comment typo 'CONFIG_SYFS'
  doc: Insert MODULE_ in module-signing macros
  Documentation: update URL to hfsplus Technote 1150
  gpio: update path to documentation
  ixgbe: Fix format string in ixgbe_fcoe.
  Kconfig: Remove useless "default N" lines
  user_namespace.c: Remove duplicated word in comment
  CREDITS: fix formatting
  treewide: Fix typo in Documentation/DocBook
  mm: Fix warning on make htmldocs caused by slab.c
  ata: ata-samsung_cf: cleanup in header file
  idr: remove unused prototype of idr_free()

Pull sched/idle changes from Ingo Molnar:
 "More idle code reorganization, to prepare for more integration.

  (Sent separately because it depended on pending timer work, which is
  now upstream)"

* 'sched-idle-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/idle: Add more comments to the code
  sched/idle: Move idle conditions in cpuidle_idle main function
  sched/idle: Reorganize the idle loop
  cpuidle/idle: Move the cpuidle_idle_call function to idle.c
  idle/cpuidle: Split cpuidle_idle_call main function into smaller functions

pidns_get()->get_pid_ns() can hit ns == NULL. This task_struct can't
go away, but task_active_pid_ns(task) is NULL if release_task(task)
was already called. Alternatively we could change get_pid_ns(ns) to
check ns != NULL, but it seems that other callers are fine.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman ebiederm@xmission.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm updates from Paolo Bonzini:
 "PPC and ARM do not have much going on this time.  Most of the cool
  stuff, instead, is in s390 and (after a few releases) x86.

  ARM has some caching fixes and PPC has transactional memory support in
  guests.  MIPS has some fixes, with more probably coming in 3.16 as
  QEMU will soon get support for MIPS KVM.

  For x86 there are optimizations for debug registers, which trigger on
  some Windows games, and other important fixes for Windows guests.  We
  now expose to the guest Broadwell instruction set extensions and also
  Intel MPX.  There's also a fix/workaround for OS X guests, nested
  virtualization features (preemption timer), and a couple kvmclock
  refinements.

  For s390, the main news is asynchronous page faults, together with
  improvements to IRQs (floating irqs and adapter irqs) that speed up
  virtio devices"

* tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits)
  KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8
  KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset
  KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode
  KVM: PPC: Book3S HV: Return ENODEV error rather than EIO
  KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code
  KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state
  KVM: PPC: Book3S HV: Add transactional memory support
  KVM: Specify byte order for KVM_EXIT_MMIO
  KVM: vmx: fix MPX detection
  KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n
  KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE
  KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write
  KVM: s390: clear local interrupts at cpu initial reset
  KVM: s390: Fix possible memory leak in SIGP functions
  KVM: s390: fix calculation of idle_mask array size
  KVM: s390: randomize sca address
  KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP
  KVM: Bump KVM_MAX_IRQ_ROUTES for s390
  KVM: s390: irq routing for adapter interrupts.
  KVM: s390: adapter interrupt sources
  ...

Pull virtio updates from Rusty Russell:
 "Nothing exciting: virtio-blk users might see a bit of a boost from the
  doubling of the default queue length though"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio-blk: base queue-depth on virtqueue ringsize or module param
  Revert a02bbb1c: MAINTAINERS: add virtio-dev ML for virtio
  virtio: fail adding buffer on broken queues.
  virtio-rng: don't crash if virtqueue is broken.
  virtio_balloon: don't crash if virtqueue is broken.
  virtio_blk: don't crash, report error if virtqueue is broken.
  virtio_net: don't crash if virtqueue is broken.
  virtio_balloon: don't softlockup on huge balloon changes.
  virtio: Use pci_enable_msix_exact() instead of pci_enable_msix()
  MAINTAINERS: virtio-dev is subscribers only
  tools/virtio: add a missing )
  tools/virtio: fix missing kmemleak_ignore symbol
  tools/virtio: update internal copies of headers

Pull DMA-mapping updates from Marek Szyprowski:
 "This contains extension for more efficient handling of io address
  space for dma-mapping subsystem for ARM architecture"

* 'for-3.15' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  arm: dma-mapping: remove order parameter from arm_iommu_create_mapping()
  arm: dma-mapping: Add support to extend DMA IOMMU mappings

Pull devicetree changes from Grant Likely:
 "Updates to devicetree core code.  This branch contains the following
  notable changes:

   - add reserved memory binding
   - make struct device_node a kobject and remove legacy
     /proc/device-tree
   - ePAPR conformance fixes
   - update in-kernel DTC copy to version v1.4.0
   - preparatory changes for dynamic device tree overlays
   - minor bug fixes and documentation changes

  The most significant change in this branch is the conversion of struct
  device_node to be a kobject that is exposed via sysfs and removal of
  the old /proc/device-tree code.  This simplifies the device tree
  handling code and tightens up the lifecycle on device tree nodes.

  [updated: added fix for dangling select PROC_DEVICETREE]"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits)
  dt: Remove dangling "select PROC_DEVICETREE"
  of: Add support for ePAPR "stdout-path" property
  of: device_node kobject lifecycle fixes
  of: only scan for reserved mem when fdt present
  powerpc: add support for reserved memory defined by device tree
  arm64: add support for reserved memory defined by device tree
  of: add missing major vendors
  of: add vendor prefix for SMSC
  of: remove /proc/device-tree
  of/selftest: Add self tests for manipulation of properties
  of: Make device nodes kobjects so they show up in sysfs
  arm: add support for reserved memory defined by device tree
  drivers: of: add support for custom reserved memory drivers
  drivers: of: add initialization code for dynamic reserved memory
  drivers: of: add initialization code for static reserved memory
  of: document bindings for reserved-memory nodes
  Revert "of: fix of_update_property()"
  kbuild: dtbs_install: new make target
  ARM: mvebu: Allows to get the SoC ID even without PCI enabled
  of: Allows to use the PCI translator without the PCI core
  ...

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are commits that were not quite ready when I sent the original
  pull request for 3.15-rc1 several days ago, but they have spent some
  time in linux-next since then and appear to be good to go.  All of
  them are fixes and cleanups.

  Specifics:

   - Remaining changes from upstream ACPICA release 20140214 that
     introduce code to automatically serialize the execution of methods
     creating any named objects which really cannot be executed in
     parallel with each other anyway (previously ACPICA attempted to
     address that by aborting methods upon conflict detection, but that
     wasn't reliable enough and led to other issues).  From Bob Moore
     and Lv Zheng.

   - intel_pstate fix to use del_timer_sync() instead of del_timer() in
     the exit path before freeing the timer structure from Dirk
     Brandewie (original patch from Thomas Gleixner).

   - cpufreq fix related to system resume from Viresh Kumar.

   - Serialization of frequency transitions in cpufreq that involve
     PRECHANGE and POSTCHANGE notifications to avoid ordering issues
     resulting from race conditions.  From Srivatsa S Bhat and Viresh
     Kumar.

   - Revert of an ACPI processor driver change that was based on a
     specific interpretation of the ACPI spec which may not be correct
     (the relevant part of the spec appears to be incomplete).  From
     Hanjun Guo.

   - Runtime PM core cleanups and documentation updates from Geert
     Uytterhoeven.

   - PNP core cleanup from Michael Opdenacker"

* tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Make cpufreq_notify_transition & cpufreq_notify_post_transition static
  cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}
  cpufreq: Make sure frequency transitions are serialized
  intel_pstate: Use del_timer_sync in intel_pstate_cpu_stop
  cpufreq: resume drivers before enabling governors
  PM / Runtime: Spelling s/competing/completing/
  PM / Runtime: s/foo_process_requests/foo_process_next_request/
  PM / Runtime: GENERIC_SUBSYS_PM_OPS is gone
  PM / Runtime: Correct documented return values for generic PM callbacks
  PM / Runtime: Split line longer than 80 characters
  PM / Runtime: dev_pm_info.runtime_error is signed
  Revert "ACPI / processor: Make it possible to get APIC ID via GIC"
  ACPICA: Enable auto-serialization as a default kernel behavior.
  ACPICA: Ignore sync_level for methods that have been auto-serialized.
  ACPICA: Add additional named objects for the auto-serialize method scan.
  ACPICA: Add auto-serialization support for ill-behaved control methods.
  ACPICA: Remove global option to serialize all control methods.
  PNP: remove deprecated IRQF_DISABLED