- 08 Apr, 2017 2 commits
-
-
Gao Feng authored
There are two nf_conntrack_l4proto_udp4 declarations in the head file nf_conntrack_ipv4/6.h. Now remove one which is not enbraced by the macro CONFIG_NF_CT_PROTO_UDPLITE. Signed-off-by:
Gao Feng <fgao@ikuai8.com>
-
Arushi Singhal authored
This comments are obsolete and should go, as there are no set of rules per CPU anymore. Signed-off-by:
Arushi Singhal <arushisinghal19971997@gmail.com>
-
- 07 Apr, 2017 5 commits
-
-
Arushi Singhal authored
Remove & from function pointers to conform to the style found elsewhere in the file. Done using the following semantic patch // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by:
Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
simran singhal authored
This patch replace list_entry with list_prev_entry as it makes the code more clear to read. Signed-off-by:
simran singhal <singhalsimran0@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
simran singhal authored
For string without format specifiers, use seq_puts(). For seq_printf("\n"), use seq_putc('\n'). Signed-off-by:
simran singhal <singhalsimran0@gmail.com> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
simran singhal authored
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Unnecessary parantheses are also remove. Signed-off-by:
simran singhal <singhalsimran0@gmail.com> Reviewed-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Add and use nfnl_msg_type() function to replace opencoded nfnetlink message type. I suggested this change, Arushi Singhal made an initial patch to address this but was missing several spots. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 06 Apr, 2017 13 commits
-
-
Gao Feng authored
The expect check function __nf_ct_expect_check() asks the master_help is necessary. So it is unnecessary to go ahead in ctnetlink_alloc_expect when there is no help. Actually the commit bc01befd ("netfilter: ctnetlink: add support for user-space expectation helpers") permits ctnetlink create one expect even though there is no master help. But the latter commit 3d058d7b ("netfilter: rework user-space expectation helper support") disables it again. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
successful insert into the bysource hash sets IPS_SRC_NAT_DONE status bit so we can check that instead of presence of nat extension which requires extra deref. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Gao Feng authored
nf_nat_mangle_{udp,tcp}_packet() returns int. However, it is used as bool type in many spots. Fix this by consistently handle this return value as a boolean. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Gao Feng authored
When remove one expect, it needs three statements. And there are multiple duplicated codes in current code. So add one common function nf_ct_remove_expect to consolidate this. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Gao Feng authored
Because the type of expecting, the member of nf_conn_help, is u8, it would overflow after reach U8_MAX(255). So it doesn't work when we configure the max_expected exceeds 255 with expect policy. Now add the check for max_expected. Return the -EINVAL when it exceeds the limit. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This new helper function allows us to check if this is a basechain. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Mostly simple cases of overlapping changes (adding code nearby, a function whose name changes, for example). Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Reject invalid updates to netfilter expectation policies, from Pablo Neira Ayuso. 2) Fix memory leak in nfnl_cthelper, from Jeffy Chen. 3) Don't do stupid things if we get a neigh_probe() on a neigh entry whose ops lack a solicit method. From Eric Dumazet. 4) Don't transmit packets in r8152 driver when the carrier is off, from Hayes Wang. 5) Fix ipv6 packet type detection in aquantia driver, from Pavel Belous. 6) Don't write uninitialized data into hw registers in bna driver, from Arnd Bergmann. 7) Fix locking in ping_unhash(), from Eric Dumazet. 8) Make BPF verifier range checks able to understand certain sequences emitted by LLVM, from Alexei Starovoitov. 9) Fix use after free in ipconfig, from Mark Rutland. 10) Fix refcount leak on force commit in openvswitch, from Jarno Rajahalme. 11) Fix various overflow checks in AF_PACKET, from Andrey Konovalov. 12) Fix endianness bug in be2net driver, from Suresh Reddy. 13) Don't forget to wake TX queues when processing a timeout, from Grygorii Strashko. 14) ARP header on-stack storage is wrong in flow dissector, from Simon Horman. 15) Lost retransmit and reordering SNMP stats in TCP can be underreported. From Yuchung Cheng. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits) nfp: fix potential use after free on xdp prog tcp: fix reordering SNMP under-counting tcp: fix lost retransmit SNMP under-counting sctp: get sock from transport in sctp_transport_update_pmtu net: ethernet: ti: cpsw: fix race condition during open() l2tp: fix PPP pseudo-wire auto-loading bnx2x: fix spelling mistake in macros HW_INTERRUT_ASSERT_SET_* l2tp: take reference on sessions being dumped tcp: minimize false-positives on TCP/GRO check sctp: check for dst and pathmtu update in sctp_packet_config flow dissector: correct size of storage for ARP net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout l2tp: take a reference on sessions used in genetlink handlers l2tp: hold session while sending creation notifications l2tp: fix duplicate session creation l2tp: ensure session can't get removed during pppol2tp_session_ioctl() l2tp: fix race in l2tp_recv_common() sctp: use right in and out stream cnt bpf: add various verifier test cases for self-tests bpf, verifier: fix rejection of unaligned access checks for map_value_adj ...
-
Jakub Kicinski authored
We should unregister the net_device first, before we give back our reference on xdp_prog. Otherwise xdp_prog may be freed before .ndo_stop() disabled the datapath. Found by code inspection. Fixes: ecd63a02 ("nfp: add XDP support in the driver") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jarod Wilson authored
People are using bonding over Infiniband IPoIB connections, and who knows what else. Infiniband has a hardware address length of 20 octets (INFINIBAND_ALEN), and the network core defines a MAX_ADDR_LEN of 32. Various places in the bonding code are currently hard-wired to 6 octets (ETH_ALEN), such as the 3ad code, which I've left untouched here. Besides, only alb is currently possible on Infiniband links right now anyway, due to commit 1533e773, so the alb code is where most of the changes are. One major component of this change is the addition of a bond_hw_addr_copy function that takes a length argument, instead of using ether_addr_copy everywhere that hardware addresses need to be copied about. The other major component of this change is converting the bonding code from using struct sockaddr for address storage to struct sockaddr_storage, as the former has an address storage space of only 14, while the latter is 128 minus a few, which is necessary to support bonding over device with up to MAX_ADDR_LEN octet hardware addresses. Additionally, this probably fixes up some memory corruption issues with the current code, where it's possible to write an infiniband hardware address into a sockaddr declared on the stack. Lightly tested on a dual mlx4 IPoIB setup, which properly shows a 20-octet hardware address now: $ cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: fault-tolerance (active-backup) (fail_over_mac active) Primary Slave: mlx4_ib0 (primary_reselect always) Currently Active Slave: mlx4_ib0 MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 100 Down Delay (ms): 100 Slave Interface: mlx4_ib0 MII Status: up Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 80:00:02:08:fe:80:00:00:00:00:00:00:e4:1d:2d:03:00:1d:67:01 Slave queue ID: 0 Slave Interface: mlx4_ib1 MII Status: up Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: 80:00:02:09:fe:80:00:00:00:00:00:01:e4:1d:2d:03:00:1d:67:02 Slave queue ID: 0 Also tested with a standard 1Gbps NIC bonding setup (with a mix of e1000 and e1000e cards), running LNST's bonding tests. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: netdev@vger.kernel.org Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
Currently the reordering SNMP counters only increase if a connection sees a higher degree then it has previously seen. It ignores if the reordering degree is not greater than the default system threshold. This significantly under-counts the number of reordering events and falsely convey that reordering is rare on the network. This patch properly and faithfully records the number of reordering events detected by the TCP stack, just like the comment says "this exciting event is worth to be remembered". Note that even so TCP still under-estimate the actual reordering events because TCP requires TS options or certain packet sequences to detect reordering (i.e. ACKing never-retransmitted sequence in recovery or disordered state). Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
The lost retransmit SNMP stat is under-counting retransmission that uses segment offloading. This patch fixes that so all retransmission related SNMP counters are consistent. Fixes: 10d3be56 ("tcp-tso: do not split TSO packets at retransmit time") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Edward Cree authored
If the mc_list is longer than 256 addresses, we enter mc_promisc mode. If we're in mc_promisc mode and the firmware doesn't support cascaded multicast, normally we also insert our mc_list, to prevent stealing by another VI. However, if the mc_list was too long, this isn't really helpful - the MC groups that didn't fit in the list can still get stolen, and having only some of them stealable will probably cause more confusing behaviour than having them all stealable. Since inserting 256 multicast filters takes a long time and can lead to MCDI state machine timeouts, just skip the mc_list insert in this overflow condition. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 05 Apr, 2017 20 commits
-
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: ethtool link settings This series adds support for getting and setting link settings via the (moderately) new ethtool ksettings ops. First patch introduces minimal speed and duplex reporting using the information directly provided in PCI BAR0 memory. Next few changes deal with the need to refresh port state read from the service process and patch 6 finally uses that information to provide link speed and duplex. Patches 7 and 8 add auto negotiation and port type reporting. Remaining changes provide the set support for speed and auto negotiation. An upcoming series will also add port splitting support via devlink. Quite a bit of churn in this series is caused by the fact that currently port speed and split changes will usually require a reboot to take effect. Current service process code is not capable of performing MAC reinitialization after chip has been passing traffic. To make sure user is aware of this limitation we refuse the configuration unless netdev is down, print warning to the logs and if configuration was performed but did take effect we unregister the netdev. Service process has a "reboot needed" sticky bit, so reloading the driver will not bring the netdev back. Note that there is a helper in patch 13 which is marked as __always_inline, because the FIELD_* macros require the parameters to be known at compilation time. I hope that is OK. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Support setting link speed and autonegotiation through set_link_ksettings() ethtool op. If the port is reconfigured in incompatible way and reboot is required the netdev will get unregistered and not come back until user reboots the system. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Add NSP backend for upcoming link configuration operations. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Allow NSP to set option code even when error is reported. This provides a way for NSP to give user more precise information about why command failed. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Make NSP port structure a union to simplify accessing the fields from generic macros. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
NSP commands may be slow to respond, we should try to avoid doing a command-per-item when user requested to change multiple parameters for instance with an ethtool .set_settings() command. Introduce a way of internal NSP code to carry state in NSP structure and add start/finish calls to perform the initialization and kick off of the configuration request, with potentially many parameters being modified in between. nfp_eth_set_mod_enable() will make use of the new code internally, other "set" functions to follow. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We will soon add more NSP commands and structure definitions. Move all high-level NSP header contents to a common nfp_nsp.h file. Right now it mostly boils down to renaming nfp_nsp_eth.h and moving some functions from nfp.h there. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Service process firmware provides us with information about media and interface (SFP module) plugged in, translate that to Linux's PORT_* defines and report via ethtool. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
NSP ABI version 0.17 is exposing the autonegotiation settings. Report whether autoneg is on via ethtool. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
On the PF prefer the link speed value provided by the NSP. Refresh port table if needed. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We will need a way of refreshing port state for link settings get/set. For get we need to refresh port speed and type. When settings are changed the reconfiguration may require reboot before it's effective. Unregister netdevs affected by reconfiguration from a workqueue. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
For caching link settings - remember if we have seen link events since the last time the eth_port information was refreshed. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We will want to unregister netdevs after their port got reconfigured. For that we need to make sure manipulations of port list from the port reconfiguration flow will not race with driver's .remove() callback. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
After port reconfiguration (port split, media type change) firmware will continue to report old configuration until reboot. NSP will inform us that reconfiguration is pending. To avoid user confusion refuse to spawn netdevs until the new configuration is applied (reboot). We need to split the netdev to eth_table port matching from MAC search and move it earlier in the probe() flow. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Read link speed from the BAR. This provides very basic information and works for both PFs and VFs. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'linux-can-next-for-4.13-20170404' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2017-03-03 this is a pull request of 5 patches for net-next/master. There are two patches by Yegor Yefremov which convert the ti_hecc driver into a DT only driver, as there is no in-tree user of the old platform driver interface anymore. The next patch by Mario Kicherer adds network namespace support to the can subsystem. The last two patches by Akshay Bhat add support for the holt_hi311x SPI CAN driver. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull MFD bug fix from Lee Jones: "Increase buffer size om cros-ec to allow for SPI messages" * tag 'mfd-fixes-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: cros-ec: Fix host command buffer size
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - hand-off primary maintainership of Kbuild - fix build warnings - fix build error when GCOV is enabled with old compiler - fix HAVE_ASM_GOTO check when GCC plugin is enabled * tag 'kbuild-fixes-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: gconfig: remove misleading parentheses around a condition jump label: fix passing kbuild_cflags when checking for asm goto support Kbuild: use cc-disable-warning consistently for maybe-uninitialized kbuild: external module build warnings when KBUILD_OUTPUT set and W=1 MAINTAINERS: add Masahiro Yamada as a Kbuild maintainer
-
LABBE Corentin authored
This patch add a generic testsuite for testing ethernet network device driver. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladislav Yasevich says: ==================== rtnetlink: Updates to rtnetlink_event() This series came out of the conversation that started as a result my first attempt to add netdevice event info to netlink messages. This series converts event processing to a 'white list', where we explicitely permit events to generate netlink messages. This is meant to make people take a closer look and determine wheter these events should really trigger netlink messages. I am also adding a V2 of my patch to add event type to the netlink message. This version supports all events that we currently generate. I will also update my patch to iproute that will show this data through 'ip monitor'. I actually need the ability to trap NETDEV_NOTIFY_PEERS event (as well as possible NETDEV_RESEND_IGMP) to support hanlding of macvtap on top of bonding. I hope others will also find this info usefull. V2: Added missed events (from David Ahern) ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-