- 11 May, 2016 40 commits
-
-
Gavin Shan authored
This drops unnecessary nested if statements in pnv_eeh_reset() to improve the code readability. After the changes, the unused local variable "ret" is dropped as well. No logical changes introduced. Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Gavin Shan authored
In hotplug case, function pci_add_pci_devices() is called to rescan the specified PCI bus, which might not have any child devices. Access to the PCI bus's child device node will cause kernel crash without exception. This adds one more check to skip scanning PCI bus that doesn't have any subordinate devices from device-tree, in order to avoid kernel crash. Signed-off-by:
-
Gavin Shan authored
This renames traverse_pci_devices() to pci_traverse_device_nodes(). The function traverses all subordinate device nodes of the specified one. Also, below cleanup applied to the function. No logical changes introduced. * Rename "pre" to "fn". * Avoid assignment in if condition reported from checkpatch.pl. Signed-off-by:
-
Gavin Shan authored
This implements and exports pci_remove_device_node_info(). It's used to remove the pdn (struct pci_dn) for the indicated device node. The function is going to be used by PowerNV PCI hotplug driver. Signed-off-by:
-
Gavin Shan authored
This renames update_dn_pci_info() to pci_add_device_node_info() with corresponding adjustment on the parameter type and exports it. The function is used to create pdn (struct pci_dn) for the indicated device node. Another function add_pdn(), almost wrapper of pci_add_device_node_info(), to be used in traverse_pci_devices(). No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This moves pci_find_bus_by_node() from arch/powerpc/platforms/ pseries/pci_dlpar.c to arch/powerpc/kernel/pci-hotplug.c so that the function can be used by pSeries and PowerNV platform at the same time. Also, below cleanup applied. No functional changes introduced. * Remove variable "busdn" in find_bus_among_children() * Use PCI_DN() to convert device node to pci_dn Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by:
-
Gavin Shan authored
This renames pcibios_find_pci_bus() to pci_find_bus_by_node() to avoid conflicts with those PCI subsystem weak function names, which have prefix "pcibios". No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This renames pcibios_{add,remove}_pci_devices() to avoid conflicts with names of the weak functions in PCI subsystem, which have the prefix "pcibios". No logical changes introduced. Signed-off-by:Alistair Popple <alistair@popple.id.au> Reviewed-by:
-
Gavin Shan authored
In current implementation, the PEs that are allocated or picked from the reserved list are identified by PE number. The PE instance has to be picked according to the PE number eventually. We have same issue when PE is released. For pnv_ioda_pick_m64_pe() and pnv_ioda_alloc_pe(), this returns PE instance so that pnv_ioda_setup_bus_PE() can use the allocated or reserved PE instance directly. Also, pnv_ioda_setup_bus_PE() returns the reserved/allocated PE instance to be used in subsequent patches. On the other hand, pnv_ioda_free_pe() uses PE instance (not number) as its argument. No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
In current implementation, the DMA32 segments required by one specific PE isn't calculated with the information hold in the PE independently. It conflicts with the PCI hotplug design: PE centralized, meaning the PE's DMA32 segments should be calculated from the information hold in the PE independently. This introduces an array (@dma32_segmap) for every PHB to track the DMA32 segmeng usage. Besides, this moves the logic calculating PE's consumed DMA32 segments to pnv_pci_ioda1_setup_dma_pe() so that PE's DMA32 segments are calculated/allocated from the information hold in the PE (DMA32 weight). Also the logic is improved: we try to allocate as much DMA32 segments as we can. It's acceptable that number of DMA32 segments less than the expected number are allocated. Signed-off-by:
-
Gavin Shan authored
PEs are put into PHB DMA32 list (phb->ioda.pe_dma_list) according to their DMA32 weight. The PEs on the list are iterated to setup their TCE32 tables at system booting time. The list is used for once at boot time and no need to keep it. This moves the logic calculating DMA32 weight of PHB and PE to pnv_ioda_setup_dma() to drop PHB's DMA32 list. Also, every PE traces the consumed DMA32 segment by @tce32_seg and @tce32_segcount are useless and they're removed. Signed-off-by:
-
Gavin Shan authored
Currently, there is one macro (TCE32_TABLE_SIZE) representing the TCE table size for one DMA32 segment. The constant representing the DMA32 segment size (1 << 28) is still used in the code. This defines PNV_IODA1_DMA32_SEGSIZE representing one DMA32 segment size. the TCE table size can be calcualted when the page has fixed 4KB size. So all the related calculation depends on one macro (PNV_IODA1_DMA32_SEGSIZE). No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This renames pnv_pci_ioda_setup_dma_pe() to pnv_pci_ioda1_setup_dma_pe() as it's the counter-part of IODA2's pnv_pci_ioda2_setup_dma_pe(). No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This enables M64 window on P7IOC, which has been enabled on PHB3. Different from PHB3 where 16 M64 BARs are supported and each of them can be owned by one particular PE# exclusively or divided evenly to 256 segments, every P7IOC PHB has 16 M64 BARs and each of them are divided to 8 segments. So every P7IOC PHB supports 128 M64 segments in total. P7IOC has M64DT, which helps mapping one particular M64 segment# to arbitrary PE#. PHB3 doesn't have M64DT, indicating that one M64 segment can only be pinned to the fixed PE#. In order to unified M64 support M64 on P7IOC and PHB3, we just provide 128 M64 segments on every P7IOC PHB and each of them is pinned to the fixed PE# by bypassing the function of M64DT. In turn, we just need different phb->init_m64() for P7IOC and PHB3 and maps M64 segment in pnv_ioda_reserve_m64_pe() for P7IOC, most of the code are shared by them. Signed-off-by:
-
Gavin Shan authored
This renames those functions picking PE number based on consumed M64 segments, mapping M64 segments to PEs as those functions are going to be shared by IODA1/IODA2 in next patch. No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
When unplugging PCI devices, their parent PEs might be offline. The consumed M64 resource by the PEs should be released at that time. As we track M32 segment consumption, this introduces an array to the PHB to track the mapping between M64 segment and PE number. Note: M64 mapping isn't covered by pnv_ioda_setup_pe_seg() as IODA2 doesn't support the mapping explicitly while it's supported on IODA1. Until now, no M64 is supported on IODA1 in software. Signed-off-by:
-
Gavin Shan authored
Currently, the IO and M32 segments are mapped to the corresponding PE based on the windows of the parent bridge of PE's primary bus. It's not going to work when the windows of root port or upstream port of the PCIe switch behind root port are extended to PHB's apertures in order to support hotplug in subsequent patch. This fixes the issue by mapping IO and M32 segments based on the resources of the PCI devices included in the PE, instead of the windows of the parent bridge of the PE's primary bus. Signed-off-by:
-
Gavin Shan authored
pnv_ioda_setup_pe_seg() associates the IO and M32 segments with the owner PE. The code mapping segments should be fixed and immune from logic changes introduced to pnv_ioda_setup_pe_seg(). This moves the code mapping segments to helper pnv_ioda_setup_pe_res(). The data type for @rc is changed to "int64_t". Also, argument @hose is removed from pnv_ioda_setup_pe() as it can be got from @pe. No functional changes introduced. Signed-off-by:
-
Gavin Shan authored
There are two arrays for IO and M32 segment maps on every PHB. The index of the arrays are segment number and the value stored in the corresponding element is PE number, indicating the segment is assigned to the PE. Initially, all elements in those two arrays are zeroes, meaning all segments are assigned to PE#0. It's wrong. This fixes the initial values in the elements of those two arrays to IODA_INVALID_PE, meaning all segments aren't assigned to any PE. Signed-off-by:
-
Gavin Shan authored
This changes the data type of PE number from "int" to "unsigned int" in order to match the fact PE number is never negative: * The number of PE to which the specified PCI device is attached. * The PE number map for SRIOV VFs. * The returned PE number from pnv_ioda_alloc_pe(). * The returned PE number from pnv_ioda2_pick_m64_pe(). Suggested-by:
-
Gavin Shan authored
This renames the fields related to PE number in "struct pnv_phb" for better reflecting of their usages as Alexey suggested. No logical changes introduced. Signed-off-by:
-
Gavin Shan authored
This moves those fields in struct pnv_phb that are related to PE allocation around. No logical change. Signed-off-by:
-
Gavin Shan authored
The last usage of pnv_phb::bdfn_to_pe() was removed in ff57b454 ("powerpc/eeh: Do probe on pci_dn"), so drop it. Signed-off-by:
-
Gavin Shan authored
This cleans up on below data struct instances to use tab instead of space indent of statement to avoid complains from scripts/checkpatch.pl. No logical changes introduced. @pnv_pci_ioda_controller_ops @pnv_npu_ioda_controller_ops Signed-off-by:
Daniel Axtens <dja@axtens.net> Reviewed-by:
-
Gavin Shan authored
Each PHB has one instance of "struct pci_controller_ops" that includes various callbacks called by PCI subsystem. In the definition of this struct, some callbacks have explicit names for its arguments, but the left don't have. This adds all explicit names of the arguments to the callbacks in "struct pci_controller_ops" so that the code looks consistent. Also, argument name @dev is replaced by @pdev as the later one is the preferred name for PCI device. Signed-off-by:
-
Rashmica Gupta authored
Testing that the TM SPRs are behaving the way they should. Uses more threads than cpus to see if the following register values persist with context switching: - the FS (failure summary) flag in TEXASR - TFIAR and TFHAR Signed-off-by:
Rashmica Gupta <rashmicy@gmail.com> Signed-off-by:
-
Rashmica Gupta authored
If the transaction is aborted, the TAR should be rolled back to the checkpointed value before the transaction began. The value written to the TAR when the transaction is suspended should only remain there if the transaction completes successfully. Signed-off-by:
-
Rashmica Gupta authored
This test does a fork syscall inside a transaction. Basic sniff test to see if we can enter the kernel during a transaction. Signed-off-by:
-
Rashmica Gupta authored
Currently tbegin, tend etc are written as opcodes or asm instructions. So standardise these to asm instructions. Signed-off-by:
-
Rashmica Gupta authored
Currently there is a reg.h in pmu/ebb that has defines that are useful in other powerpc selftests so move this up into selftests/powerpc folder. Also include in utils.h - as this is often used in self tests. Add in some other useful register defines. Signed-off-by:
-
Mahesh Salgaonkar authored
The routine machine_check_pSeries_early() is only used on powernv, not pseries. Hence rename machine_check_pSeries_early() to machine_check_powernv_early(). Reported-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Christophe Lombard authored
In the PowerVM environment, the PHYP CoherentAccel component manages the state of the Coherent Accelerator Processor Interface adapter and virtualizes CAPI resources, handles CAPP, PSL, PSL Slice errors - and interrupts - and provides a new set of hcalls for the OS APIs to utilize Accelerator Function Unit (AFU). During the course of operation, a coherent platform function can encounter errors. Some possible reason for errors are: • Hardware recoverable and unrecoverable errors • Transient and over-threshold correctable errors PHYP implements its own state model for the coherent platform function. The state of the AFU is available through a hcall. The current implementation of the cxl driver, for the PowerVM environment, checks this state of the AFU only when an action is requested - open a device, ioctl command, memory map, attach/detach a process - from an external driver - cxlflash, libcxl. If an error is detected the cxl driver handles the error according the content of the Power Architecture Platform Requirements document. But in case of low-level troubles (or error injection), the PHYP component may reset the card and change the AFU state. The PHYP interface doesn't provide any way to be notified when that happens thus implies that the cxl driver: • cannot handle immediatly the state change of the AFU. • cannot notify other drivers (cxlflash, ...) The purpose of this patch is to wake up the cpu periodically to check the current state of each AFU and to see if we need to enter an error recovery path. Signed-off-by:
Christophe Lombard <clombard@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
-
Ian Munsie authored
cxl devices typically access memory using an MMU in much the same way as the CPU, and each context includes a state register much like the MSR in the CPU. Like the CPU, the state register includes a bit to enable relocation, which we currently always enable. In some cases, it may be desirable to allow a device to access memory using real addresses instead of effective addresses, so this adds a new API, cxl_set_translation_mode, that can be used to disable relocation on a given kernel context. This can allow for the creation of a special privileged context that the device can use if it needs relocation disabled, and can use regular contexts at times when it needs relocation enabled. This interface is only available to users of the kernel API for obvious reasons, and will never be supported in a virtualised environment. This will be used by the upcoming cxl support in the mlx5 driver. Signed-off-by:
-
Ian Munsie authored
In the cxl kernel API, it is possible to create a context and start it without allocating any interrupts. Since we assign or allocate the PSL interrupt when allocating AFU interrupts this will lead to a situation where we start the context with no means to take any faults. The user API is not affected as it always goes through the cxl interrupt allocation code paths and will have the PSL interrupt allocated or assigned, even if no AFU interrupts were requested. This checks that at least one interrupt is configured at the time of attach, and if not it will assign the multiplexed PSL interrupt for powernv, or allocate a single interrupt for PowerVM. Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by:
-
Ian Munsie authored
These defines are not used, but other equivalent definitions (CXL_SPA_SW_CMD_*) are used. Remove the unused defines. Signed-off-by:
-
Ian Munsie authored
num_of_process is a 16 bit field, theoretically allowing an AFU to support 16K processes, however the scheduled process area currently has a maximum size of 1MB, which limits the maximum number of processes to 7704. Some AFUs may not necessarily care what the limit is and just want to be able to use the maximum by setting the field to 16K. To allow these to work, detect this situation and use the maximum size for the SPA. Downgrade the WARN_ON to a dev_warn. Signed-off-by:
-
Gavin Shan authored
The function is used to update the MMU with software PTE. It can be called by data access exception handler (0x300) or instruction access exception handler (0x400). If the function is called by 0x400 handler, the local variable @access is set to _PAGE_EXEC to indicate the software PTE should have that flag set. When the function is called by 0x300 handler, @access is set to zero. This improves the readability of the function by replacing if statements with switch. No logical changes introduced. Signed-off-by:
-
Oliver O'Halloran authored
The zone that contains the top of memory will be either ZONE_NORMAL or ZONE_HIGHMEM depending on the kernel config. There are two functions that require this information and both of them use an #ifdef to set a local variable (top_zone). This is a little silly so lets just make it a constant. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Cc: linux-mm@kvack.org Signed-off-by:
-
Oliver O'Halloran authored
There is a switch fallthough in instr_analyze() which can cause an invalid instruction to be emulated as a different, valid, instruction. The rld* (opcode 30) case extracts a sub-opcode from bits 3:1 of the instruction word. However, the only valid values of this field are 001 and 000. These cases are correctly handled, but the others are not which causes execution to fall through into case 31. Breaking out of the switch causes the instruction to be marked as unknown and allows the caller to deal with the invalid instruction in a manner consistent with other invalid instructions. Signed-off-by:
-
Lennart Sorensen authored
Commit be96f633 ("powerpc: Split out instruction analysis part of emulate_step()") introduced ldarx and stdcx into the instructions in sstep.c, which are not accepted by the assembler on powerpcspe, but does seem to be accepted by the normal powerpc assembler even in 32 bit mode. Wrap these two instructions in a __powerpc64__ check like it is everywhere else in the file. Fixes: be96f633 ("powerpc: Split out instruction analysis part of emulate_step()") Signed-off-by:
Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by:
-
