- 07 May, 2012 6 commits
-
-
Hans de Goede authored
Prior to this patch the stk-webcam driver was enabling the vflip and mirror bits in the sensor by default. Which only is the right thing to do if the sensor is actually mounted upside down, which it usually is not. Actually we've received upside down reports for both usb-ids which this driver supports, one for an "ASUSTeK Computer Inc." "A3H" laptop with a build in 174f:a311 webcam, and one for an "To Be Filled By O.E.M." "Z96FM" laptop with a build in 05e1:0501 webcam. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Added hardware seek support based on information gleaned from the GPLv2 driver available here: http://sourceforge.net/projects/av-usbradio/Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Thanks to an older driver by Faidon Liambotis <paravoid@debian.org> (as noted in the radio-mr800 comment block at the start) for figuring out how to get the signal/stereo state. Signed-off-by:
-
Hans Verkuil authored
Implement the control framework and update to the latest V4L2 framework. The v4l2-compliance tool now runs without errors. Fixed bad g/s_tuner handling with respect to mono/stereo. Support control events. Signed-off-by:
-
Hans Verkuil authored
If there is an error when creating controls the v4l2_ctrl_handler_free function must be called. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
- 04 May, 2012 2 commits
-
-
Hans Verkuil authored
When creating 64 bit integer controls make sure the max and step values are 0 (as 64 bit controls do not have ranges). Signed-off-by:
-
Hans Verkuil authored
This driver now complies with the v4l2-compliance tests and uses the v4l2 frameworks correctly. It has been tested with the radio-keene FM transmitter as well. Signed-off-by:
-
- 03 May, 2012 8 commits
-
-
Jean-François Moine authored
The exposure of Omnivision sensors is defined by the registers 07, 10 and 04. This patch updates the registers 10 and 04 before using the registers 2d and 2e (dummy lines). Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Jean-François Moine authored
Telling the bridge to update the sensor when setting the exposure or the gain is not needed when the image transfer is not started. Signed-off-by:
-
Jean-François Moine authored
The i2c interface speed was set to 400 Kb/s while it is 100 Kb/s for most sensors. Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
The table did not contain the sensor mt9vprb. Signed-off-by:
-
Jean-François Moine authored
This avoid skips in switch statements. Signed-off-by:
-
Jean-François Moine authored
The error messages in stable kernel releases must be output by 'pr_err'. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Cc: stable@kernel.org Signed-off-by:
-
- 02 May, 2012 2 commits
-
-
Hans Verkuil authored
V4L2_CID_JPEG_COMPRESION_QUALITY -> V4L2_CID_JPEG_COMPRESSION_QUALITY Signed-off-by:
-
Julia Lawall authored
At the point of the call to video_register_device, both dev->vbi_dev and dev->vdev have been allocated, and so should be freed on failure. The error-handling code is moved to the end of the function, to avoid code duplication. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
- 26 Apr, 2012 2 commits
-
-
Dan Carpenter authored
"stat" is always zero here. The condition used to be needed, but we shifted stuff around in 0f0b270f "[media] ngene: CXD2099AR Common Interface driver". This doesn't change how the code works, it's just a bit tidier. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
The saa7164_vbi_stop_port() changes the SAA_ERR_ALREADY_STOPPED result code to -EIO before returning. Signed-off-by:
-
- 19 Apr, 2012 20 commits
-
-
Guennadi Liakhovetski authored
Fix the warning: In file included from /home/lyakh/software/project/24/src/linux-2.6/drivers/media/video/v4l2-subdev.c:29: linux-2.6/include/media/v4l2-ctrls.h:497: warning: 'struct file' declared inside parameter list linux-2.6/include/media/v4l2-ctrls.h:497: warning: its scope is only this definition or declaration, which is probably not what you want linux-2.6/include/media/v4l2-ctrls.h:505: warning: 'struct file' declared inside parameter list Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
-
Hans Verkuil authored
This was inadvertently introduced when the integer menu control was added. Signed-off-by:
-
Hans Verkuil authored
Those fields are meaningless for such control types, and the control framework should zero them. Otherwise v4l2-compliance will complain about non-zero min/max/step/def fields. Signed-off-by:
-
Hans Verkuil authored
If the vidioc_default implementation doesn't support the ioctl, then drivers must return -ENOTTY instead of -EINVAL. Signed-off-by:
-
Hans Verkuil authored
Both radio-keene and dsbr100 did one v4l2_device_get too many. Thus the refcount never became 0 and that causes a memory leak. Also updated the V4L2 framework documentation accordingly. Signed-off-by:
-
Dan Carpenter authored
buf[] is a 4 character array. Perhaps this was some debugging code from back in the day? Signed-off-by:
-
Marcos Paulo de Souza authored
The output of "make versioncheck" told us that the file drivers/media/dvb/ddbridge/ddbridge-code.c has a incorrect include of version.h: linux/drivers/media/dvb/ddbridge/ddbridge-core.c: 34 linux/version.h not needed. After take a look in the code, we can agree to remove it. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <linux-media@vger.kernel.org> Signed-off-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
-
Marcos Paulo de Souza authored
The output of "make versioncheck" told us that: drivers/media/radio/radio-keene.c: 31 linux/version.h not needed. After take a look in the code, we can agree to remove it. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <linux-media@vger.kernel.org> Signed-off-by:
-
Marcos Paulo de Souza authored
The output of "make versioncheck" told us that: drivers/media/video/adp1653.c: 37 linux/version.h not needed. After we take a look at the code, we can afree to remove it. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <linux-media@vger.kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Marcos: > The output of "make versioncheck" told us that: > > drivers/staging/media/easycap/easycap_ioctl.c: 2442: need linux/version.h Now that drivers/media/video/v4l2-ioctl.c fills cap->version: case VIDIOC_QUERYCAP: { struct v4l2_capability *cap = (struct v4l2_capability *)arg; if (!ops->vidioc_querycap) break; cap->version = LINUX_VERSION_CODE; V4L2 drivers that use video_ioctl2() shouldn't initialize it anymore. Reported-by: -
Mauro Carvalho Chehab authored
As reported by Marcos: On 04-18-2012 01:30, Marcos Paulo de Souza wrote: > The output of "make versioncheck" told us that: > > drivers/media/video/tlg2300/pd-video.c: 1669: need linux/version.h > > If we take a look at the code, we can see that this file uses the macro > KERNEL_VERSION. The V4L2 core now fills it automatically, so drivers shouldn't touch on cap->version anymore. Reported by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: -
Gianluca Gennari authored
Reported working here: http://ubuntuforums.org/archive/index.php/t-1510188.html http://ubuntuforums.org/archive/index.php/t-1756828.html https://sites.google.com/site/slackwarestuff/home/elgato-eyetvSigned-off-by:
Gianluca Gennari <gennarone@gmail.com> Signed-off-by:
-
Tim Gardner authored
Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Tim Gardner authored
Signed-off-by:
-
Gianluca Gennari authored
Remove duplicate code and comment, probably due to a patch applied twice. Signed-off-by:
-
Hans Verkuil authored
Fixes a regression in VIDIOC_QUERYMENU introduced when the __s64 value field was added to the union. On a 64-bit system this will change the size of this v4l2_querymenu structure from 44 to 48 bytes, thus breaking the ABI. By adding the packed attribute it is working again. Tested on both 64 and 32 bit systems. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Michael Krufky authored
This function is only called from within au8522_common.c - mark it static. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
au8522_dig.o and au8522_decoder.o function independentantly of each other, each for a different hardware function using a different software subsystem api, each with its own set of subsystem module dependencies. Since these drivers do not depend on each other, and it is in fact possible to build hardware designs using one function and not the other, lets split this module into two, allowing system integrators to enable the hardware without dragging in undesired dependencies. Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
-
Michael Krufky authored
We can tell from the eeprom whether we have a xc5000a or xc5000c. Attach the correct tuner based on this information. Signed-off-by:
-
