Removing duplicate code by assigning the inodes private data pointer
in __oprofilefs_create_file(). Extending the function interface to
pass the pointer.
Signed-off-by: Robert Richter <robert.richter@amd.com>

This patch removes some unnecessary goto statements.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>

This patch simplifies op_create_counter(). Removing if/else if paths
and return code variable by direct returning from function.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>

There is duplicate cleanup code in the init and exit functions. Now,
oprofile_arch_exit() is also used if oprofile_arch_init() fails.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>

Now, that we only call the exit function if init succeeds with commit:

 979048e1 oprofile: don't call arch exit code from init code on failure

we can simplify the x86 init/exit functions too. Variable using_nmi
becomes obsolete.
Signed-off-by: Robert Richter <robert.richter@amd.com>

This patch implements the oprofile backtrace  generation for 32 bit
applications running in the 64bit environment (compat mode).

With this change it's possible to get backtrace for 32bits applications
under the 64bits environment using oprofile's callgraph options.

opcontrol --setup -c ...
opreport -l -cg ...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>

Removing unnecessary struct frame_head and replacing it with
struct stack_frame.

The struct stack_frame is already defined and used in other places
in kernel, so there's no reason to define new structure.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>

Conflicts:
	arch/arm/oprofile/common.c
Signed-off-by: Robert Richter <robert.richter@amd.com>

This patch fixes a resource leak on failure, where the
oprofilefs and some counters may not released properly.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@kernel.org> # .35.x
LKML-Reference: <20100929145225.GJ13563@erda.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent

Some cpus still deliver spurious interrupts after disabling a
counter. This caused 'undelivered NMI' messages. This patch
fixes this. Introduced by:

  4177c42a: perf, x86: Try to handle unknown nmis with an enabled PMU
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: gorcunov@gmail.com <gorcunov@gmail.com>
Cc: fweisbec@gmail.com <fweisbec@gmail.com>
Cc: ying.huang@intel.com <ying.huang@intel.com>
Cc: ming.m.lin@intel.com <ming.m.lin@intel.com>
Cc: yinghai@kernel.org <yinghai@kernel.org>
Cc: andi@firstfloor.org <andi@firstfloor.org>
Cc: eranian@google.com <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100915162034.GO13563@erda.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The guest can use the paravirt clock in kvmclock.c which is used
by sched_clock(), which in turn is used by the tracing mechanism
for timestamps, which leads to infinite recursion.

Disable mcount/tracing for kvmclock.o.

Cc: stable@kernel.org
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When using a paravirt clock, pvclock.c can be used by sched_clock(),
which in turn is used by the tracing mechanism for timestamps,
which leads to infinite recursion.

Disable mcount/tracing for pvclock.o.

Cc: stable@kernel.org
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
LKML-Reference: <4C9A9A3F.4040201@goop.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Prevent no-handler signal syscall restart recursion.
  sparc: Don't mask signal when we can't setup signal frame.
  sparc64: Fix race in signal instruction flushing.
  sparc64: Support RAW perf events.

Make sigreturn zero regs->trap, make do_signal() do the same on all
paths.  As it is, signal interrupting e.g. read() from fd 512 (==
ERESTARTSYS) with another signal getting unblocked when the first
handler finishes will lead to restart one insn earlier than it ought
to.  Same for multiple signals with in-kernel handlers interrupting
that sucker at the same time.  Same for multiple signals of any kind
interrupting that sucker on 64bit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  bdi: Fix warnings in __mark_inode_dirty for /dev/zero and friends
  char: Mark /dev/zero and /dev/kmem as not capable of writeback
  bdi: Initialize noop_backing_dev_info properly
  cfq-iosched: fix a kernel OOPs when usb key is inserted
  block: fix blk_rq_map_kern bio direction flag
  cciss: freeing uninitialized data on error path

Inodes of devices such as /dev/zero can get dirty for example via
utime(2) syscall or due to atime update. Backing device of such inodes
(zero_bdi, etc.) is however unable to handle dirty inodes and thus
__mark_inode_dirty complains.  In fact, inode should be rather dirtied
against backing device of the filesystem holding it. This is generally a
good rule except for filesystems such as 'bdev' or 'mtd_inodefs'. Inodes
in these pseudofilesystems are referenced from ordinary filesystem
inodes and carry mapping with real data of the device. Thus for these
inodes we have to use inode->i_mapping->backing_dev_info as we did so
far. We distinguish these filesystems by checking whether sb->s_bdi
points to a non-trivial backing device or not.

Example: Assume we have an ext3 filesystem on /dev/sda1 mounted on /.
There's a device inode A described by a path "/dev/sdb" on this
filesystem. This inode will be dirtied against backing device "8:0"
after this patch. bdev filesystem contains block device inode B coupled
with our inode A. When someone modifies a page of /dev/sdb, it's B that
gets dirtied and the dirtying happens against the backing device "8:16".
Thus both inodes get filed to a correct bdi list.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

These devices don't do any writeback but their device inodes still can get
dirty so mark bdi appropriately so that bdi code does the right thing and files
inodes to lists of bdi carrying the device inodes.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Properly initialize this backing dev info so that writeback code does not
barf when getting to it e.g. via sb->s_bdi.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Explicitly clear the "in-syscall" bit when we have no signal
handler and back up the program counters to back up the system
call.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Don't invoke the signal handler tracehook in that situation
either.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linux:
  i2c-omap: Make sure i2c bus is free before setting it to idle

The lock structs are currently protected by the BKL, but are accessed by
code in fs/locks.c and misc file system and DLM code.  These stubs will
allow all users to switch to the new interface before the implementation
is changed to a spinlock.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the i2c bus receives an interrupt with both BB (bus busy) and
ARDY (register access ready) statuses set during the tranfer of the last message
the bus was put to idle while still busy.

This caused bus to timeout.
Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix nohz balance kick
  sched: Fix user time incorrectly accounted as system time on 32-bit

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hw breakpoints: Fix pid namespace bug
  x86: Fix instruction breakpoint encoding
  oprofile: Add Support for Intel CPU Family 6 / Model 22 (Intel Celeron 540)
  kprobes: Fix Kconfig dependency

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: select CRYPTO
  ceph: check mapping to determine if FILE_CACHE cap is used
  ceph: only send one flushsnap per cap_snap per mds session
  ceph: fix cap_snap and realm split
  ceph: stop sending FLUSHSNAPs when we hit a dirty capsnap
  ceph: correctly set 'follows' in flushsnap messages
  ceph: fix dn offset during readdir_prepopulate
  ceph: fix file offset wrapping at 4GB on 32-bit archs
  ceph: fix reconnect encoding for old servers
  ceph: fix pagelist kunmap tail
  ceph: fix null pointer deref on anon root dentry release

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Hold a reference to the object whilst unbinding the eviction list
  drm/i915,agp/intel: Add second set of PCI-IDs for B43
  drm/i915: Fix Sandybridge fence registers
  drm/i915/crt: Downgrade warnings for hotplug failures
  drm/i915: Ensure that the crtcinfo is populated during mode_fixup()

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: update comments to reflect LHCALL_LOAD_GDT_ENTRY.
  virtio: console: Prevent userspace from submitting NULL buffers
  virtio: console: Fix poll blocking even though there is data to read

There's a situation where the nohz balancer will try to wake itself:

cpu-x is idle which is also ilb_cpu
got a scheduler tick during idle
and the nohz_kick_needed() in trigger_load_balance() checks for
rq_x->nr_running which might not be zero (because of someone waking a
task on this rq etc) and this leads to the situation of the cpu-x
sending a kick to itself.

And this can cause a lockup.

Avoid this by not marking ourself eligible for kicking.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1284400941.2684.19.camel@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This patch adds CPU type detection for dunnington processor (Family 6
/ Model 29) to be identified as core 2 family cpu type (wikipedia
source).

I tested oprofile on Intel(R) Xeon(R) CPU E7440 reporting itself as
model 29, and it runs without an issue.

Spec:

 http://www.intel.com/Assets/en_US/PDF/specupdate/320336.pdfSigned-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>

Mike reported a kernel crash when a usb key hotplug is performed while all
kernel thrads are not in a root cgroup and are running in one of the child
cgroups of blkio controller.

	BUG: unable to handle kernel NULL pointer dereference at 0000002c
	IP: [<c11c7b08>] cfq_get_queue+0x232/0x412
	*pde = 00000000
	Oops: 0000 [#1] PREEMPT
	last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/host3/scsi_host/host3/uevent

	[..]
	Pid: 30039, comm: scsi_scan_3 Not tainted 2.6.35.2-fg.roam #1 Volvi2                         /Aspire 4315
	EIP: 0060:[<c11c7b08>] EFLAGS: 00010086 CPU: 0
	EIP is at cfq_get_queue+0x232/0x412
	EAX: f705f9c0 EBX: e977abac ECX: 00000000 EDX: 00000000
	ESI: f00da400 EDI: f00da4ec EBP: e977a800 ESP: dff8fd00
	 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
	Process scsi_scan_3 (pid: 30039, ti=dff8e000 task=f6b6c9a0 task.ti=dff8e000)
	Stack:
	 00000000 00000000 00000001 01ff0000 f00da508 00000000 f00da524 f00da540
	<0> e7994940 dd631750 f705f9c0 e977a820 e977ac44 f00da4d0 00000001 f6b6c9a0
	<0> 00000010 00008010 0000000b 00000000 00000001 e977a800 dd76fac0 00000246
	Call Trace:
	 [<c11c7f10>] ? cfq_set_request+0x228/0x34c
	 [<c11c7ce8>] ? cfq_set_request+0x0/0x34c
	 [<c11bb3b9>] ? elv_set_request+0xf/0x1c
	 [<c11bdd51>] ? get_request+0x1ad/0x22f
	 [<c11bddf2>] ? get_request_wait+0x1f/0x11a
	 [<c11d013b>] ? kvasprintf+0x33/0x3b
	 [<c127b537>] ? scsi_execute+0x1d/0x103
	 [<c127b675>] ? scsi_execute_req+0x58/0x83
	 [<c127c391>] ? scsi_probe_and_add_lun+0x188/0x7c2
	 [<c12718c6>] ? attribute_container_add_device+0x15/0xfa
	 [<c11c95d1>] ? kobject_get+0xf/0x13
	 [<c126d1db>] ? get_device+0x10/0x14
	 [<c127be93>] ? scsi_alloc_target+0x217/0x24d
	 [<c127cbd8>] ? __scsi_scan_target+0x95/0x480
	 [<c10204eb>] ? dequeue_entity+0x14/0x1fe
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c127d00d>] ? scsi_scan_channel+0x4a/0x76
	 [<c127d0b0>] ? scsi_scan_host_selected+0x77/0xad
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d137>] ? do_scsi_scan_host+0x51/0x56
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d14a>] ? do_scan_async+0xe/0x11a
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c10354c5>] ? kthread+0x5e/0x63
	 [<c1035467>] ? kthread+0x0/0x63
	 [<c1002af6>] ? kernel_thread_helper+0x6/0x10
	Code: 44 24 1c 54 83 44 24 18 54 83 fa 03 75 94 8b 06 c7 86 64 02 00 00 01 00 00 00 83 e0 03 09 f0 89 06 8b 44 24 28 8b 90 58 01 00 00 <8b> 42 2c 85 c0 75 03 8b 42 08 8d 54 24 48 52 8d 4c 24 50 51 68
	EIP: [<c11c7b08>] cfq_get_queue+0x232/0x412 SS:ESP 0068:dff8fd00
	CR2: 000000000000002c
	---[ end trace 9a88306573f69b12 ]---

The problem here is that we don't have bdi->dev information available when
thread does some IO.  Hence when dev_name() tries to access bdi->dev, it
crashes.

This problem does not happen if kernel threads are in root group as root
group is statically allocated at device initialization time and we don't
hit this piece of code.

Fix it by delaying the filling of major and minor number information of
device in blk_group.  Initially a blk_group is created with 0 as device
information and this information is filled later once some more IO comes
in from same group.
Reported-by: Mike Kazantsev <mk.fraggod@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

This bug was introduced in 7b6d91da
"block: unify flags for struct bio and struct request"

Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

The "h->scatter_list" is allocated inside a for loop.  If any of those
allocations fail, then the rest of the list is uninitialized data.  When
we free it we should start from the top and free backwards so that we
don't call kfree() on uninitialized pointers.

Also if the allocation for "h->scatter_list" fails then we would get an
Oops here.  I should have noticed this when I send: 4ee69851 "cciss:
handle allocation failure."  but I didn't.  Sorry about that.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

If another cpu does a very wide munmap() on the signal frame area,
it can tear down the page table hierarchy from underneath us.

Borrow an idea from the 64-bit fault path's get_user_insn(), and
disable cross call interrupts during the page table traversal
to lock them in place while we operate.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

We used to have a hypercall which reloaded the entire GDT, then we
switched to one which loaded a single entry (to match the IDT code).

Some comments were not updated, so fix them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported by: Eviatar Khen <eviatarkhen@gmail.com>

A userspace could submit a buffer with 0 length to be written to the
host.  Prevent such a situation.

This was not needed previously, but recent changes in the way write()
works exposed this condition to trigger a virtqueue event to the host,
causing a NULL buffer to be sent across.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: stable@kernel.org

I found this while working on a Linux agent for spice, the symptom I was
seeing was select blocking on the spice vdagent virtio serial port even
though there were messages queued up there.

virtio_console's port_fops_poll checks port->inbuf != NULL to determine
if read won't block. However if an application reads enough bytes from
inbuf through port_fops_read, to empty the current port->inbuf,
port->inbuf will be NULL even though there may be buffers left in the
virtqueue.

This causes poll() to block even though there is data to be read,
this patch fixes this by using will_read_block(port) instead of the
port->inbuf != NULL check.
Signed-off-By: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org